@@ -13793,8 +13793,8 @@ M: Qingfang Deng <dqfext@gmail.com>
M: SkyLake Huang <SkyLake.Huang@mediatek.com>
L: netdev@vger.kernel.org
S: Maintained
-F: drivers/net/phy/mediatek-ge-soc.c
-F: drivers/net/phy/mediatek-ge.c
+F: drivers/net/phy/mediatek/mtk-ge-soc.c
+F: drivers/net/phy/mediatek/mtk-ge.c
F: drivers/phy/mediatek/phy-mtk-xfi-tphy.c
MEDIATEK I2C CONTROLLER DRIVER
@@ -251,22 +251,7 @@ config MAXLINEAR_GPHY
Support for the Maxlinear GPY115, GPY211, GPY212, GPY215,
GPY241, GPY245 PHYs.
-config MEDIATEK_GE_PHY
- tristate "MediaTek Gigabit Ethernet PHYs"
- help
- Supports the MediaTek Gigabit Ethernet PHYs.
-
-config MEDIATEK_GE_SOC_PHY
- tristate "MediaTek SoC Ethernet PHYs"
- depends on (ARM64 && ARCH_MEDIATEK) || COMPILE_TEST
- depends on NVMEM_MTK_EFUSE
- help
- Supports MediaTek SoC built-in Gigabit Ethernet PHYs.
-
- Include support for built-in Ethernet PHYs which are present in
- the MT7981 and MT7988 SoCs. These PHYs need calibration data
- present in the SoCs efuse and will dynamically calibrate VCM
- (common-mode voltage) during startup.
+source "drivers/net/phy/mediatek/Kconfig"
config MICREL_PHY
tristate "Micrel PHYs"
@@ -71,8 +71,7 @@ obj-$(CONFIG_MARVELL_PHY) += marvell.o
obj-$(CONFIG_MARVELL_88Q2XXX_PHY) += marvell-88q2xxx.o
obj-$(CONFIG_MARVELL_88X2222_PHY) += marvell-88x2222.o
obj-$(CONFIG_MAXLINEAR_GPHY) += mxl-gpy.o
-obj-$(CONFIG_MEDIATEK_GE_PHY) += mediatek-ge.o
-obj-$(CONFIG_MEDIATEK_GE_SOC_PHY) += mediatek-ge-soc.o
+obj-y += mediatek/
obj-$(CONFIG_MESON_GXL_PHY) += meson-gxl.o
obj-$(CONFIG_MICREL_KS8995MA) += spi_ks8995.o
obj-$(CONFIG_MICREL_PHY) += micrel.o
new file mode 100644
@@ -0,0 +1,22 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config MEDIATEK_GE_PHY
+ tristate "MediaTek Gigabit Ethernet PHYs"
+ help
+ Supports the MediaTek non-built-in Gigabit Ethernet PHYs.
+
+ Non-built-in Gigabit Ethernet PHYs include mt7530/mt7531.
+ You may find mt7530 inside mt7621. This driver shares some
+ common operations with MediaTek SoC built-in Gigabit
+ Ethernet PHYs.
+
+config MEDIATEK_GE_SOC_PHY
+ tristate "MediaTek SoC Ethernet PHYs"
+ depends on (ARM64 && ARCH_MEDIATEK) || COMPILE_TEST
+ depends on NVMEM_MTK_EFUSE
+ help
+ Supports MediaTek SoC built-in Gigabit Ethernet PHYs.
+
+ Include support for built-in Ethernet PHYs which are present in
+ the MT7981 and MT7988 SoCs. These PHYs need calibration data
+ present in the SoCs efuse and will dynamically calibrate VCM
+ (common-mode voltage) during startup.
new file mode 100644
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_MEDIATEK_GE_PHY) += mtk-ge.o
+obj-$(CONFIG_MEDIATEK_GE_SOC_PHY) += mtk-ge-soc.o
similarity index 100%
rename from drivers/net/phy/mediatek-ge-soc.c
rename to drivers/net/phy/mediatek/mtk-ge-soc.c
similarity index 100%
rename from drivers/net/phy/mediatek-ge.c
rename to drivers/net/phy/mediatek/mtk-ge.c