@@ -593,6 +593,7 @@
#define IGC_PTM_STAT_T4M1_OVFL BIT(3) /* T4 minus T1 overflow */
#define IGC_PTM_STAT_ADJUST_1ST BIT(4) /* 1588 timer adjusted during 1st PTM cycle */
#define IGC_PTM_STAT_ADJUST_CYC BIT(5) /* 1588 timer adjusted during non-1st PTM cycle */
+#define IGC_PTM_STAT_ALL GENMASK(5, 0) /* Used to clear all status */
/* PCIe PTM Cycle Control */
#define IGC_PTM_CYCLE_CTRL_CYC_TIME(msec) ((msec) & 0x3ff) /* PTM Cycle Time (msec) */
@@ -974,13 +974,40 @@ static void igc_ptm_log_error(struct igc_adapter *adapter, u32 ptm_stat)
}
}
+static void igc_ptm_trigger(struct igc_hw *hw)
+{
+ u32 ctrl;
+
+ /* To "manually" start the PTM cycle we need to set the
+ * trigger (TRIG) bit
+ */
+ ctrl = rd32(IGC_PTM_CTRL);
+ ctrl |= IGC_PTM_CTRL_TRIG;
+ wr32(IGC_PTM_CTRL, ctrl);
+ /* Perform flush after write to CTRL register otherwise
+ * transaction may not start
+ */
+ wrfl();
+}
+
+static void igc_ptm_reset(struct igc_hw *hw)
+{
+ u32 ctrl;
+
+ ctrl = rd32(IGC_PTM_CTRL);
+ ctrl &= ~IGC_PTM_CTRL_TRIG;
+ wr32(IGC_PTM_CTRL, ctrl);
+ /* Write to clear all status */
+ wr32(IGC_PTM_STAT, IGC_PTM_STAT_ALL);
+}
+
static int igc_phc_get_syncdevicetime(ktime_t *device,
struct system_counterval_t *system,
void *ctx)
{
- u32 stat, t2_curr_h, t2_curr_l, ctrl;
struct igc_adapter *adapter = ctx;
struct igc_hw *hw = &adapter->hw;
+ u32 stat, t2_curr_h, t2_curr_l;
int err, count = 100;
ktime_t t1, t2_curr;
@@ -994,25 +1021,13 @@ static int igc_phc_get_syncdevicetime(ktime_t *device,
* are transitory. Repeating the process returns valid
* data eventually.
*/
-
- /* To "manually" start the PTM cycle we need to clear and
- * then set again the TRIG bit.
- */
- ctrl = rd32(IGC_PTM_CTRL);
- ctrl &= ~IGC_PTM_CTRL_TRIG;
- wr32(IGC_PTM_CTRL, ctrl);
- ctrl |= IGC_PTM_CTRL_TRIG;
- wr32(IGC_PTM_CTRL, ctrl);
-
- /* The cycle only starts "for real" when software notifies
- * that it has read the registers, this is done by setting
- * VALID bit.
- */
- wr32(IGC_PTM_STAT, IGC_PTM_STAT_VALID);
+ igc_ptm_trigger(hw);
err = readx_poll_timeout(rd32, IGC_PTM_STAT, stat,
stat, IGC_PTM_STAT_SLEEP,
IGC_PTM_STAT_TIMEOUT);
+ igc_ptm_reset(hw);
+
if (err < 0) {
netdev_err(adapter->netdev, "Timeout reading IGC_PTM_STAT register\n");
return err;
@@ -1021,15 +1036,7 @@ static int igc_phc_get_syncdevicetime(ktime_t *device,
if ((stat & IGC_PTM_STAT_VALID) == IGC_PTM_STAT_VALID)
break;
- if (stat & ~IGC_PTM_STAT_VALID) {
- /* An error occurred, log it. */
- igc_ptm_log_error(adapter, stat);
- /* The STAT register is write-1-to-clear (W1C),
- * so write the previous error status to clear it.
- */
- wr32(IGC_PTM_STAT, stat);
- continue;
- }
+ igc_ptm_log_error(adapter, stat);
} while (--count);
if (!count) {
@@ -1255,7 +1262,7 @@ void igc_ptp_stop(struct igc_adapter *adapter)
void igc_ptp_reset(struct igc_adapter *adapter)
{
struct igc_hw *hw = &adapter->hw;
- u32 cycle_ctrl, ctrl;
+ u32 cycle_ctrl, ctrl, stat;
unsigned long flags;
u32 timadj;
@@ -1290,14 +1297,19 @@ void igc_ptp_reset(struct igc_adapter *adapter)
ctrl = IGC_PTM_CTRL_EN |
IGC_PTM_CTRL_START_NOW |
IGC_PTM_CTRL_SHRT_CYC(IGC_PTM_SHORT_CYC_DEFAULT) |
- IGC_PTM_CTRL_PTM_TO(IGC_PTM_TIMEOUT_DEFAULT) |
- IGC_PTM_CTRL_TRIG;
+ IGC_PTM_CTRL_PTM_TO(IGC_PTM_TIMEOUT_DEFAULT);
wr32(IGC_PTM_CTRL, ctrl);
/* Force the first cycle to run. */
- wr32(IGC_PTM_STAT, IGC_PTM_STAT_VALID);
+ igc_ptm_trigger(hw);
+
+ if (readx_poll_timeout_atomic(rd32, IGC_PTM_STAT, stat,
+ stat, IGC_PTM_STAT_SLEEP,
+ IGC_PTM_STAT_TIMEOUT))
+ netdev_err(adapter->netdev, "Timeout reading IGC_PTM_STAT register\n");
+ igc_ptm_reset(hw);
break;
default:
/* No work to do. */