@@ -695,7 +695,6 @@ static int m_can_handle_lec_err(struct net_device *dev,
u32 timestamp = 0;
cdev->can.can_stats.bus_error++;
- stats->rx_errors++;
/* propagate the error condition to the CAN stack */
skb = alloc_can_err_skb(dev, &cf);
@@ -711,26 +710,32 @@ static int m_can_handle_lec_err(struct net_device *dev,
case LEC_STUFF_ERROR:
netdev_dbg(dev, "stuff error\n");
cf->data[2] |= CAN_ERR_PROT_STUFF;
+ stats->rx_errors++;
break;
case LEC_FORM_ERROR:
netdev_dbg(dev, "form error\n");
cf->data[2] |= CAN_ERR_PROT_FORM;
+ stats->rx_errors++;
break;
case LEC_ACK_ERROR:
netdev_dbg(dev, "ack error\n");
cf->data[3] = CAN_ERR_PROT_LOC_ACK;
+ stats->tx_errors++;
break;
case LEC_BIT1_ERROR:
netdev_dbg(dev, "bit1 error\n");
cf->data[2] |= CAN_ERR_PROT_BIT1;
+ stats->tx_errors++;
break;
case LEC_BIT0_ERROR:
netdev_dbg(dev, "bit0 error\n");
cf->data[2] |= CAN_ERR_PROT_BIT0;
+ stats->tx_errors++;
break;
case LEC_CRC_ERROR:
netdev_dbg(dev, "CRC error\n");
cf->data[3] = CAN_ERR_PROT_LOC_CRC_SEQ;
+ stats->rx_errors++;
break;
default:
break;
The m_can_handle_lec_err() function was incorrectly incrementing only the receive error counter, even in cases of bit or acknowledgment errors that occur during transmission. The patch fixes the issue by incrementing the appropriate counter based on the type of error. Fixes: e0d1f4816f2a ("can: m_can: add Bosch M_CAN controller support") Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> --- drivers/net/can/m_can/m_can.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-)