@@ -460,7 +460,6 @@ static int sja1000_err(struct net_device *dev, uint8_t isrc, uint8_t status)
if (isrc & IRQ_BEI) {
/* bus error interrupt */
priv->can.can_stats.bus_error++;
- stats->rx_errors++;
ecc = priv->read_reg(priv, SJA1000_ECC);
@@ -485,8 +484,12 @@ static int sja1000_err(struct net_device *dev, uint8_t isrc, uint8_t status)
cf->data[3] = ecc & ECC_SEG;
/* Error occurred during transmission? */
- if ((ecc & ECC_DIR) == 0)
+ if ((ecc & ECC_DIR) == 0) {
cf->data[2] |= CAN_ERR_PROT_TX;
+ stats->tx_errors++;
+ } else {
+ stats->rx_errors++;
+ }
}
if (isrc & IRQ_EPI) {
/* error passive interrupt */
The sja1000_err() function only incremented the receive error counter and never the transmit error counter, even if the ECC_DIR flag reported that an error had occurred during transmission. The patch increments the receive/transmit error counter based on the value of the ECC_DIR flag. Fixes: 429da1cc841b ("can: Driver for the SJA1000 CAN controller") Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> --- drivers/net/can/sja1000/sja1000.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)