@@ -361,7 +361,6 @@ static void ems_usb_rx_err(struct ems_usb *dev, struct ems_cpc_msg *msg)
/* bus error interrupt */
dev->can.can_stats.bus_error++;
- stats->rx_errors++;
cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR;
@@ -381,8 +380,12 @@ static void ems_usb_rx_err(struct ems_usb *dev, struct ems_cpc_msg *msg)
}
/* Error occurred during transmission? */
- if ((ecc & SJA1000_ECC_DIR) == 0)
+ if ((ecc & SJA1000_ECC_DIR) == 0) {
cf->data[2] |= CAN_ERR_PROT_TX;
+ stats->tx_errors++;
+ } else {
+ stats->rx_errors++;
+ }
if (dev->can.state == CAN_STATE_ERROR_WARNING ||
dev->can.state == CAN_STATE_ERROR_PASSIVE) {
The ems_usb_rx_err() function only incremented the receive error counter and never the transmit error counter, even if the ECC_DIR flag reported that an error had occurred during transmission. The patch increments the receive/transmit error counter based on the value of the ECC_DIR flag. Fixes: 702171adeed3 ("ems_usb: Added support for EMS CPC-USB/ARM7 CAN/USB interface") Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> --- drivers/net/can/usb/ems_usb.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)