@@ -526,7 +526,6 @@ static void f81604_handle_can_bus_errors(struct f81604_port_priv *priv,
netdev_dbg(netdev, "bus error interrupt\n");
priv->can.can_stats.bus_error++;
- stats->rx_errors++;
if (skb) {
cf->can_id |= CAN_ERR_PROT | CAN_ERR_BUSERROR;
@@ -550,8 +549,12 @@ static void f81604_handle_can_bus_errors(struct f81604_port_priv *priv,
cf->data[3] = data->ecc & F81604_SJA1000_ECC_SEG;
/* Error occurred during transmission? */
- if ((data->ecc & F81604_SJA1000_ECC_DIR) == 0)
+ if ((data->ecc & F81604_SJA1000_ECC_DIR) == 0) {
cf->data[2] |= CAN_ERR_PROT_TX;
+ stats->tx_errors++;
+ } else {
+ stats->rx_errors++;
+ }
}
set_bit(F81604_CLEAR_ECC, &priv->clear_flags);
The f81604_handle_can_bus_errors() function only incremented the receive error counter and never the transmit error counter, even if the ECC_DIR flag reported that an error had occurred during transmission. The patch increments the receive/transmit error counter based on the value of the ECC_DIR flag. Fixes: 88da17436973 ("can: usb: f81604: add Fintek F81604 support") Signed-off-by: Dario Binacchi <dario.binacchi@amarulasolutions.com> --- drivers/net/can/usb/f81604.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)