[v3,4/5] arm64: dts: qcom: move common parts for qcs8300-ride variants into a .dtsi

Message ID	20241118071846.2964333-5-quic_yijiyang@quicinc.com (mailing list archive)
State	Not Applicable
Headers	show Received: from mx0a-0031df01.pphosted.com (mx0a-0031df01.pphosted.com [205.220.168.131]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 3686018DF86; Mon, 18 Nov 2024 07:19:19 +0000 (UTC) From: YijieYang <quic_yijiyang@quicinc.com> To: Bjorn Andersson <andersson@kernel.org>, Konrad Dybcio <konradybcio@kernel.org>, Rob Herring <robh@kernel.org>, Krzysztof Kozlowski <krzk+dt@kernel.org>, Conor Dooley <conor+dt@kernel.org>, Richard Cochran <richardcochran@gmail.com> CC: <linux-arm-msm@vger.kernel.org>, <devicetree@vger.kernel.org>, <linux-kernel@vger.kernel.org>, <netdev@vger.kernel.org>, <quic_yijiyang@quicinc.com> Subject: [PATCH v3 4/5] arm64: dts: qcom: move common parts for qcs8300-ride variants into a .dtsi Date: Mon, 18 Nov 2024 15:18:45 +0800 Message-ID: <20241118071846.2964333-5-quic_yijiyang@quicinc.com> In-Reply-To: <20241118071846.2964333-1-quic_yijiyang@quicinc.com> References: <20241118071846.2964333-1-quic_yijiyang@quicinc.com> Precedence: bulk MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Content-Type: text/plain
Series	Enable ethernet for qcs8300 \| expand [v3,0/5] Enable ethernet for qcs8300 [v3,1/5] dt-bindings: arm: qcom: add qcs8300-ride Rev 2 [v3,2/5] arm64: dts: qcom: qcs8300: add the first 1Gb ethernet [v3,3/5] arm64: dts: qcom: qcs8300-ride: enable ethernet0 [v3,4/5] arm64: dts: qcom: move common parts for qcs8300-ride variants into a .dtsi [v3,5/5] arm64: dts: qcom: qcs8300-ride-r2: add new board file

Context	Check	Description
netdev/tree_selection	success	Not a local patch

diff --git a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts dissimilarity index 96% index b1c9f2cb9749..9b9922f1fcc6 100644 --- a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts +++ b/arch/arm64/boot/dts/qcom/qcs8300-ride.dts @@ -1,379 +1,32 @@ -// SPDX-License-Identifier: BSD-3-Clause -/* - * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved. - */ - -/dts-v1/; - -#include <dt-bindings/gpio/gpio.h> -#include <dt-bindings/regulator/qcom,rpmh-regulator.h> - -#include "qcs8300.dtsi" -/ { - model = "Qualcomm Technologies, Inc. QCS8300 Ride"; - compatible = "qcom,qcs8300-ride", "qcom,qcs8300"; - chassis-type = "embedded"; - - aliases { - serial0 = &uart7; - }; - - chosen { - stdout-path = "serial0:115200n8"; - }; - - clocks { - xo_board_clk: xo-board-clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <38400000>; - }; - - sleep_clk: sleep-clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <32000>; - }; - }; -}; - -&apps_rsc { - regulators-0 { - compatible = "qcom,pmm8654au-rpmh-regulators"; - qcom,pmic-id = "a"; - - vreg_s4a: smps4 { - regulator-name = "vreg_s4a"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_s9a: smps9 { - regulator-name = "vreg_s9a"; - regulator-min-microvolt = <1352000>; - regulator-max-microvolt = <1352000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l3a: ldo3 { - regulator-name = "vreg_l3a"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l4a: ldo4 { - regulator-name = "vreg_l4a"; - regulator-min-microvolt = <880000>; - regulator-max-microvolt = <912000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l5a: ldo5 { - regulator-name = "vreg_l5a"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l6a: ldo6 { - regulator-name = "vreg_l6a"; - regulator-min-microvolt = <880000>; - regulator-max-microvolt = <912000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l7a: ldo7 { - regulator-name = "vreg_l7a"; - regulator-min-microvolt = <880000>; - regulator-max-microvolt = <912000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l8a: ldo8 { - regulator-name = "vreg_l8a"; - regulator-min-microvolt = <2504000>; - regulator-max-microvolt = <2960000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l9a: ldo9 { - regulator-name = "vreg_l9a"; - regulator-min-microvolt = <2970000>; - regulator-max-microvolt = <3072000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; - }; - }; - - regulators-1 { - compatible = "qcom,pmm8654au-rpmh-regulators"; - qcom,pmic-id = "c"; - - vreg_s5c: smps5 { - regulator-name = "vreg_s5c"; - regulator-min-microvolt = <1104000>; - regulator-max-microvolt = <1104000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l1c: ldo1 { - regulator-name = "vreg_l1c"; - regulator-min-microvolt = <300000>; - regulator-max-microvolt = <500000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l2c: ldo2 { - regulator-name = "vreg_l2c"; - regulator-min-microvolt = <900000>; - regulator-max-microvolt = <904000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l4c: ldo4 { - regulator-name = "vreg_l4c"; - regulator-min-microvolt = <1200000>; - regulator-max-microvolt = <1200000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l6c: ldo6 { - regulator-name = "vreg_l6c"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l7c: ldo7 { - regulator-name = "vreg_l7c"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l8c: ldo8 { - regulator-name = "vreg_l8c"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; - }; - - vreg_l9c: ldo9 { - regulator-name = "vreg_l9c"; - regulator-min-microvolt = <1800000>; - regulator-max-microvolt = <1800000>; - regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>; - regulator-allow-set-load; - regulator-allowed-modes = <RPMH_REGULATOR_MODE_LPM - RPMH_REGULATOR_MODE_HPM>; - }; - }; -}; - -&ethernet0 { - phy-mode = "sgmii"; - phy-handle = <&sgmii_phy0>; - - pinctrl-0 = <&ethernet0_default>; - pinctrl-names = "default"; - - snps,mtl-rx-config = <&mtl_rx_setup>; - snps,mtl-tx-config = <&mtl_tx_setup>; - snps,ps-speed = <1000>; - - status = "okay"; - - mdio { - compatible = "snps,dwmac-mdio"; - #address-cells = <1>; - #size-cells = <0>; - - sgmii_phy0: phy@8 { - compatible = "ethernet-phy-id0141.0dd4"; - reg = <0x8>; - device_type = "ethernet-phy"; - interrupts-extended = <&tlmm 4 IRQ_TYPE_EDGE_FALLING>; - reset-gpios = <&tlmm 31 GPIO_ACTIVE_LOW>; - reset-assert-us = <11000>; - reset-deassert-us = <70000>; - }; - }; - - mtl_rx_setup: rx-queues-config { - snps,rx-queues-to-use = <4>; - snps,rx-sched-sp; - - queue0 { - snps,dcb-algorithm; - snps,map-to-dma-channel = <0x0>; - snps,route-up; - snps,priority = <0x1>; - }; - - queue1 { - snps,dcb-algorithm; - snps,map-to-dma-channel = <0x1>; - snps,route-ptp; - }; - - queue2 { - snps,avb-algorithm; - snps,map-to-dma-channel = <0x2>; - snps,route-avcp; - }; - - queue3 { - snps,avb-algorithm; - snps,map-to-dma-channel = <0x3>; - snps,priority = <0xc>; - }; - }; - - mtl_tx_setup: tx-queues-config { - snps,tx-queues-to-use = <4>; - snps,tx-sched-sp; - - queue0 { - snps,dcb-algorithm; - }; - - queue1 { - snps,dcb-algorithm; - }; - - queue2 { - snps,avb-algorithm; - snps,send_slope = <0x1000>; - snps,idle_slope = <0x1000>; - snps,high_credit = <0x3e800>; - snps,low_credit = <0xffc18000>; - }; - - queue3 { - snps,avb-algorithm; - snps,send_slope = <0x1000>; - snps,idle_slope = <0x1000>; - snps,high_credit = <0x3e800>; - snps,low_credit = <0xffc18000>; - }; - }; -}; - -&gcc { - clocks = <&rpmhcc RPMH_CXO_CLK>, - <&sleep_clk>, - <0>, - <0>, - <0>, - <0>, - <0>, - <0>, - <0>, - <0>; -}; - -&qupv3_id_0 { - status = "okay"; -}; - -&remoteproc_adsp { - firmware-name = "qcom/qcs8300/adsp.mbn"; - status = "okay"; -}; - -&remoteproc_cdsp { - firmware-name = "qcom/qcs8300/cdsp0.mbn"; - status = "okay"; -}; - -&remoteproc_gpdsp { - firmware-name = "qcom/qcs8300/gpdsp0.mbn"; - status = "okay"; -}; - -&rpmhcc { - clocks = <&xo_board_clk>; - clock-names = "xo"; -}; - -&serdes0 { - phy-supply = <&vreg_l5a>; - status = "okay"; -}; - -&tlmm { - ethernet0_default: ethernet0-default-state { - ethernet0_mdc: ethernet0-mdc-pins { - pins = "gpio5"; - function = "emac0_mdc"; - drive-strength = <16>; - bias-pull-up; - }; - - ethernet0_mdio: ethernet0-mdio-pins { - pins = "gpio6"; - function = "emac0_mdio"; - drive-strength = <16>; - bias-pull-up; - }; - }; -}; - -&uart7 { - status = "okay"; -}; - -&ufs_mem_hc { - reset-gpios = <&tlmm 133 GPIO_ACTIVE_LOW>; - vcc-supply = <&vreg_l8a>; - vcc-max-microamp = <1100000>; - vccq-supply = <&vreg_l4c>; - vccq-max-microamp = <1200000>; - status = "okay"; -}; - -&ufs_mem_phy { - vdda-phy-supply = <&vreg_l4a>; - vdda-pll-supply = <&vreg_l5a>; - status = "okay"; -}; +// SPDX-License-Identifier: BSD-3-Clause +/* + * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved. + */ + +/dts-v1/; + +#include "qcs8300-ride.dtsi" +/ { + model = "Qualcomm Technologies, Inc. QCS8300 Ride"; + compatible = "qcom,qcs8300-ride", "qcom,qcs8300"; + chassis-type = "embedded"; +}; + +&ethernet0 { + phy-mode = "sgmii"; +}; + +&mdio { + compatible = "snps,dwmac-mdio"; + #address-cells = <1>; + #size-cells = <0>; + sgmii_phy0: phy@8 { + compatible = "ethernet-phy-id0141.0dd4"; + reg = <0x8>; + device_type = "ethernet-phy"; + interrupts-extended = <&tlmm 4 IRQ_TYPE_EDGE_FALLING>; + reset-gpios = <&tlmm 31 GPIO_ACTIVE_LOW>; + reset-assert-us = <11000>; + reset-deassert-us = <70000>; + }; +}; diff --git a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts b/arch/arm64/boot/dts/qcom/qcs8300-ride.dtsi similarity index 94% copy from arch/arm64/boot/dts/qcom/qcs8300-ride.dts copy to arch/arm64/boot/dts/qcom/qcs8300-ride.dtsi index b1c9f2cb9749..e02347c2adf4 100644 --- a/arch/arm64/boot/dts/qcom/qcs8300-ride.dts +++ b/arch/arm64/boot/dts/qcom/qcs8300-ride.dtsi @@ -3,17 +3,11 @@ * Copyright (c) 2024 Qualcomm Innovation Center, Inc. All rights reserved. */ -/dts-v1/; - #include <dt-bindings/gpio/gpio.h> #include <dt-bindings/regulator/qcom,rpmh-regulator.h> #include "qcs8300.dtsi" / { - model = "Qualcomm Technologies, Inc. QCS8300 Ride"; - compatible = "qcom,qcs8300-ride", "qcom,qcs8300"; - chassis-type = "embedded"; - aliases { serial0 = &uart7; }; @@ -211,7 +205,6 @@ vreg_l9c: ldo9 { }; &ethernet0 { - phy-mode = "sgmii"; phy-handle = <&sgmii_phy0>; pinctrl-0 = <&ethernet0_default>; @@ -223,20 +216,10 @@ &ethernet0 { status = "okay"; - mdio { + mdio: mdio { compatible = "snps,dwmac-mdio"; #address-cells = <1>; #size-cells = <0>; - - sgmii_phy0: phy@8 { - compatible = "ethernet-phy-id0141.0dd4"; - reg = <0x8>; - device_type = "ethernet-phy"; - interrupts-extended = <&tlmm 4 IRQ_TYPE_EDGE_FALLING>; - reset-gpios = <&tlmm 31 GPIO_ACTIVE_LOW>; - reset-assert-us = <11000>; - reset-deassert-us = <70000>; - }; }; mtl_rx_setup: rx-queues-config {

[v3,4/5] arm64: dts: qcom: move common parts for qcs8300-ride variants into a .dtsi

Checks

Commit Message

Patch