@@ -52,6 +52,7 @@ struct options {
unsigned int tclass;
unsigned int hlimit;
unsigned int priority;
+ unsigned int priority_cmsg;
} sockopt;
struct {
unsigned int family;
@@ -59,6 +60,7 @@ struct options {
unsigned int proto;
} sock;
struct option_cmsg_u32 mark;
+ struct option_cmsg_u32 priority_cmsg;
struct {
bool ena;
unsigned int delay;
@@ -97,6 +99,7 @@ static void __attribute__((noreturn)) cs_usage(const char *bin)
"\n"
"\t\t-m val Set SO_MARK with given value\n"
"\t\t-M val Set SO_MARK via setsockopt\n"
+ "\t\t-Q val Set SO_PRIORITY via cmsg\n"
"\t\t-d val Set SO_TXTIME with given delay (usec)\n"
"\t\t-t Enable time stamp reporting\n"
"\t\t-f val Set don't fragment via cmsg\n"
@@ -115,7 +118,7 @@ static void cs_parse_args(int argc, char *argv[])
{
int o;
- while ((o = getopt(argc, argv, "46sS:p:P:m:M:n:d:tf:F:c:C:l:L:H:")) != -1) {
+ while ((o = getopt(argc, argv, "46sS:p:P:m:M:n:d:tf:F:c:C:l:L:H:Q:")) != -1) {
switch (o) {
case 's':
opt.silent_send = true;
@@ -148,6 +151,10 @@ static void cs_parse_args(int argc, char *argv[])
opt.mark.ena = true;
opt.mark.val = atoi(optarg);
break;
+ case 'Q':
+ opt.priority_cmsg.ena = true;
+ opt.priority_cmsg.val = atoi(optarg);
+ break;
case 'M':
opt.sockopt.mark = atoi(optarg);
break;
@@ -252,6 +259,8 @@ cs_write_cmsg(int fd, struct msghdr *msg, char *cbuf, size_t cbuf_sz)
ca_write_cmsg_u32(cbuf, cbuf_sz, &cmsg_len,
SOL_SOCKET, SO_MARK, &opt.mark);
+ ca_write_cmsg_u32(cbuf, cbuf_sz, &cmsg_len,
+ SOL_SOCKET, SO_PRIORITY, &opt.priority_cmsg);
ca_write_cmsg_u32(cbuf, cbuf_sz, &cmsg_len,
SOL_IPV6, IPV6_DONTFRAG, &opt.v6.dontfrag);
ca_write_cmsg_u32(cbuf, cbuf_sz, &cmsg_len,
new file mode 100755
@@ -0,0 +1,147 @@
+#!/bin/bash
+# SPDX-License-Identifier: GPL-2.0
+
+IP4=192.0.2.1/24
+TGT4=192.0.2.2/24
+TGT4_NO_MASK=192.0.2.2
+TGT4_RAW=192.0.2.3/24
+TGT4_RAW_NO_MASK=192.0.2.3
+IP6=2001:db8::1/64
+TGT6=2001:db8::2/64
+TGT6_NO_MASK=2001:db8::2
+TGT6_RAW=2001:db8::3/64
+TGT6_RAW_NO_MASK=2001:db8::3
+PORT=1234
+DELAY=4000
+
+
+create_filter() {
+
+ local ns=$1
+ local dev=$2
+ local handle=$3
+ local vlan_prio=$4
+ local ip_type=$5
+ local proto=$6
+ local dst_ip=$7
+
+ local cmd="tc -n $ns filter add dev $dev egress pref 1 handle $handle \
+ proto 802.1q flower vlan_prio $vlan_prio vlan_ethtype $ip_type"
+
+ if [[ "$proto" == "u" ]]; then
+ ip_proto="udp"
+ elif [[ "$ip_type" == "ipv4" && "$proto" == "i" ]]; then
+ ip_proto="icmp"
+ elif [[ "$ip_type" == "ipv6" && "$proto" == "i" ]]; then
+ ip_proto="icmpv6"
+ fi
+
+ if [[ "$proto" != "r" ]]; then
+ cmd="$cmd ip_proto $ip_proto"
+ fi
+
+ cmd="$cmd dst_ip $dst_ip action pass"
+
+ eval $cmd
+}
+
+TOTAL_TESTS=0
+FAILED_TESTS=0
+
+check_result() {
+ ((TOTAL_TESTS++))
+ if [ "$1" -ne 0 ]; then
+ ((FAILED_TESTS++))
+ fi
+}
+
+cleanup() {
+ ip link del dummy1 2>/dev/null
+ ip -n ns1 link del dummy1.10 2>/dev/null
+ ip netns del ns1 2>/dev/null
+}
+
+trap cleanup EXIT
+
+
+
+ip netns add ns1
+
+ip -n ns1 link set dev lo up
+ip -n ns1 link add name dummy1 up type dummy
+
+ip -n ns1 link add link dummy1 name dummy1.10 up type vlan id 10 \
+ egress-qos-map 0:0 1:1 2:2 3:3 4:4 5:5 6:6 7:7
+
+ip -n ns1 address add $IP4 dev dummy1.10
+ip -n ns1 address add $IP6 dev dummy1.10
+
+ip netns exec ns1 bash -c "
+sysctl -w net.ipv4.ping_group_range='0 2147483647'
+exit"
+
+
+ip -n ns1 neigh add $TGT4_NO_MASK lladdr 00:11:22:33:44:55 nud permanent dev \
+ dummy1.10
+ip -n ns1 neigh add $TGT6_NO_MASK lladdr 00:11:22:33:44:55 nud permanent dev dummy1.10
+ip -n ns1 neigh add $TGT4_RAW_NO_MASK lladdr 00:11:22:33:44:66 nud permanent dev dummy1.10
+ip -n ns1 neigh add $TGT6_RAW_NO_MASK lladdr 00:11:22:33:44:66 nud permanent dev dummy1.10
+
+tc -n ns1 qdisc add dev dummy1 clsact
+
+FILTER_COUNTER=10
+
+for i in 4 6; do
+ for proto in u i r; do
+ echo "Test IPV$i, prot: $proto"
+ for priority in {0..7}; do
+ if [[ $i == 4 && $proto == "r" ]]; then
+ TGT=$TGT4_RAW_NO_MASK
+ elif [[ $i == 6 && $proto == "r" ]]; then
+ TGT=$TGT6_RAW_NO_MASK
+ elif [ $i == 4 ]; then
+ TGT=$TGT4_NO_MASK
+ else
+ TGT=$TGT6_NO_MASK
+ fi
+
+ handle="${FILTER_COUNTER}${priority}"
+
+ create_filter ns1 dummy1 $handle $priority ipv$i $proto $TGT
+
+ pkts=$(tc -n ns1 -j -s filter show dev dummy1 egress \
+ | jq ".[] | select(.options.handle == ${handle}) | \
+ .options.actions[0].stats.packets")
+
+ if [[ $pkts == 0 ]]; then
+ check_result 0
+ else
+ echo "prio $priority: expected 0, got $pkts"
+ check_result 1
+ fi
+
+ ip netns exec ns1 ./cmsg_sender -$i -Q $priority -d "${DELAY}" -p $proto $TGT $PORT
+ ip netns exec ns1 ./cmsg_sender -$i -P $priority -d "${DELAY}" -p $proto $TGT $PORT
+
+
+ pkts=$(tc -n ns1 -j -s filter show dev dummy1 egress \
+ | jq ".[] | select(.options.handle == ${handle}) | \
+ .options.actions[0].stats.packets")
+ if [[ $pkts == 2 ]]; then
+ check_result 0
+ else
+ echo "prio $priority: expected 2, got $pkts"
+ check_result 1
+ fi
+ done
+ FILTER_COUNTER=$((FILTER_COUNTER + 10))
+ done
+done
+
+if [ $FAILED_TESTS -ne 0 ]; then
+ echo "FAIL - $FAILED_TESTS/$TOTAL_TESTS tests failed"
+ exit 1
+else
+ echo "OK - All $TOTAL_TESTS tests passed"
+ exit 0
+fi
Extend cmsg_sender.c with a new option '-Q' to send SO_PRIORITY ancillary data. cmsg_so_priority.sh script added to validate SO_PRIORITY behavior by creating VLAN device with egress QoS mapping and testing packet priorities using flower filters. Verify that packets with different priorities are correctly matched and counted by filters for multiple protocols and IP versions. Suggested-by: Ido Schimmel <idosch@idosch.org> Signed-off-by: Anna Emese Nyiri <annaemesenyiri@gmail.com> --- tools/testing/selftests/net/cmsg_sender.c | 11 +- .../testing/selftests/net/cmsg_so_priority.sh | 147 ++++++++++++++++++ 2 files changed, 157 insertions(+), 1 deletion(-) create mode 100755 tools/testing/selftests/net/cmsg_so_priority.sh