diff mbox series

[v3,6/6] arm64: dts: agilex5: initial support for Arrow AXE5-Eagle

Message ID 20241205-v6-12-topic-socfpga-agilex5-v3-6-2a8cdf73f50a@pengutronix.de (mailing list archive)
State Changes Requested
Headers show
Series ARM64: dts: intel: agilex5: add nodes and new board | expand

Checks

Context Check Description
netdev/tree_selection success Not a local patch

Commit Message

Steffen Trumtrar Dec. 5, 2024, 9:06 a.m. UTC 
The Arrow AXE5-Eagle is an Intel Agilex5 SoCFPGA based board with:

   - 1x PCIe Gen4.0 edge connector
   - 4-port USB HUB
   - 2x 1Gb Ethernet
   - microSD
   - HDMI output
   - 2x 10Gb SFP+ cages

As most devices aren't supported mainline yet, this is only the initial
support for the board.

Signed-off-by: Steffen Trumtrar <s.trumtrar@pengutronix.de>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 arch/arm64/boot/dts/intel/Makefile                 |   1 +
 .../boot/dts/intel/socfpga_agilex5_axe5_eagle.dts  | 140 +++++++++++++++++++++
 2 files changed, 141 insertions(+)

Comments

Andrew Lunn Dec. 7, 2024, 8:26 p.m. UTC | #1 
>    - 2x 1Gb Ethernet

> +&gmac2 {
> +	status = "okay";
> +	phy-mode = "rgmii-id";
> +	phy-handle = <&emac2_phy0>;
> +
> +	mdio0 {
> +		#address-cells = <1>;
> +		#size-cells = <0>;
> +		compatible = "snps,dwmac-mdio";
> +		emac2_phy0: ethernet-phy@1 {
> +			reg = <0x1>;
> +		};
> +	};
> +};


No gmac1?

	Andrew
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/intel/Makefile b/arch/arm64/boot/dts/intel/Makefile
index d39cfb723f5b6674a821dfdafb21b12668bb1e0e..3e87d548c532b1a9e38f4489c037c5c4db3a50b8 100644
--- a/arch/arm64/boot/dts/intel/Makefile
+++ b/arch/arm64/boot/dts/intel/Makefile
@@ -3,5 +3,6 @@  dtb-$(CONFIG_ARCH_INTEL_SOCFPGA) += socfpga_agilex_n6000.dtb \
 				socfpga_agilex_socdk.dtb \
 				socfpga_agilex_socdk_nand.dtb \
 				socfpga_agilex5_socdk.dtb \
+				socfpga_agilex5_axe5_eagle.dtb \
 				socfpga_n5x_socdk.dtb
 dtb-$(CONFIG_ARCH_KEEMBAY) += keembay-evm.dtb
diff --git a/arch/arm64/boot/dts/intel/socfpga_agilex5_axe5_eagle.dts b/arch/arm64/boot/dts/intel/socfpga_agilex5_axe5_eagle.dts
new file mode 100644
index 0000000000000000000000000000000000000000..c0f6870e7b40a53ca0d685b4109ff24e1409bb0e
--- /dev/null
+++ b/arch/arm64/boot/dts/intel/socfpga_agilex5_axe5_eagle.dts
@@ -0,0 +1,140 @@ 
+// SPDX-License-Identifier:     GPL-2.0
+/*
+ * Copyright (C) 2024, Arrow Electronics, Inc.
+ */
+#include "socfpga_agilex5.dtsi"
+
+/ {
+	model = "SoCFPGA Agilex5 Arrow AXE5-Eagle";
+	compatible = "arrow,socfpga-agilex5-axe5-eagle", "intel,socfpga-agilex5";
+
+	aliases {
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led-0 {
+			label = "hps_led0";
+			gpios = <&porta 6 GPIO_ACTIVE_HIGH>;
+		};
+
+		led-1 {
+			label = "hps_led1";
+			gpios = <&porta 7 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+
+		key-0 {
+			label = "hps_sw0";
+			gpios = <&porta 10 0>;
+			linux,input-type = <5>;	/* EV_SW */
+			linux,code = <0x0>;
+		};
+
+		key-1 {
+			label = "hps_sw1";
+			gpios = <&porta 1 0>;
+			linux,input-type = <5>;	/* EV_SW */
+			linux,code = <0x0>;
+		};
+
+		key-2 {
+			label = "hps_pb0";
+			gpios = <&porta 8 1>;
+			linux,code = <187>;		/* KEY_F17 */
+		};
+
+		key-3 {
+			label = "hps_pb1";
+			gpios = <&porta 9 1>;
+			linux,code = <188>;		/* KEY_F18 */
+		};
+	};
+
+	vdd: regulator-vdd {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-supply";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-always-on;
+	};
+
+	vdd_3_3: regulator-vdd {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-supply";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-always-on;
+	};
+};
+
+&gmac2 {
+	status = "okay";
+	phy-mode = "rgmii-id";
+	phy-handle = <&emac2_phy0>;
+
+	mdio0 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+		emac2_phy0: ethernet-phy@1 {
+			reg = <0x1>;
+		};
+	};
+};
+
+&gpio0 {
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+};
+
+&i2c1 {
+	status = "okay";
+
+	i2c-mux@70 {
+		compatible = "nxp,pca9544";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x70>;
+		status = "okay";
+	};
+};
+
+&osc1 {
+	clock-frequency = <25000000>;
+};
+
+&qspi {
+	status = "okay";
+
+	flash@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "micron,mt25qu02g", "jedec,spi-nor";
+		reg = <0>;
+		spi-max-frequency = <100000000>;
+
+		m25p,fast-read;
+		cdns,read-delay = <2>;
+		cdns,tshsl-ns = <50>;
+		cdns,tsd2d-ns = <50>;
+		cdns,tchsh-ns = <4>;
+		cdns,tslch-ns = <4>;
+	};
+};
+
+&uart0 {
+	status = "okay";
+};