From patchwork Mon Dec 9 10:34:34 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 8bit X-Patchwork-Submitter: Oleksij Rempel X-Patchwork-Id: 13899267 Received: from metis.whiteo.stw.pengutronix.de (metis.whiteo.stw.pengutronix.de [185.203.201.7]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 53439217F25 for ; Mon, 9 Dec 2024 10:34:55 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=185.203.201.7 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1733740497; cv=none; b=P3RYb48eda47EzSq6y/lpVE6VwiyXqRj/A2bssCq5fn6c+r6QI4nxMpuJSkNPZIQvNRtJLddXu3C7DgV+/n3b0iGfoU8sAodOSmQ6hsRQtcdMQ1VKlko72I5gzc2B6S3CgNgLegVk08SD1fUEmWTftY/HMEgXDpfgwwCgyoNyFk= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1733740497; c=relaxed/simple; bh=Pv1y2rUk4D7YIRTWWFsMKM9CRt6p2zuOxY5NCh5B+JA=; h=From:To:Cc:Subject:Date:Message-Id:In-Reply-To:References: MIME-Version:Content-Type; b=e6jJSMGg033E+y2t7ilyEf5yGQZIv2SrFbZyeh5NtHwIn9e2dv8aSEiieZPTJqCeUXvREqpjXVHKCOjjJcVa7T3r/3hUgEK7eN4ycKxc3Y9E9ABtxHRrebmgE27BlPXceAsQYdl6V94E+GHKdg2xyRjVdhgemYVD7vKjQ2VN4/s= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=none (p=none dis=none) header.from=pengutronix.de; spf=pass smtp.mailfrom=pengutronix.de; arc=none smtp.client-ip=185.203.201.7 Authentication-Results: smtp.subspace.kernel.org; dmarc=none (p=none dis=none) header.from=pengutronix.de Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=pengutronix.de Received: from drehscheibe.grey.stw.pengutronix.de ([2a0a:edc0:0:c01:1d::a2]) by metis.whiteo.stw.pengutronix.de with esmtps (TLS1.3:ECDHE_RSA_AES_256_GCM_SHA384:256) (Exim 4.92) (envelope-from ) id 1tKb65-00063w-U5; Mon, 09 Dec 2024 11:34:37 +0100 Received: from dude04.red.stw.pengutronix.de ([2a0a:edc0:0:1101:1d::ac]) by drehscheibe.grey.stw.pengutronix.de with esmtps (TLS1.3) tls TLS_ECDHE_RSA_WITH_AES_256_GCM_SHA384 (Exim 4.96) (envelope-from ) id 1tKb63-002UsM-0n; Mon, 09 Dec 2024 11:34:36 +0100 Received: from ore by dude04.red.stw.pengutronix.de with local (Exim 4.96) (envelope-from ) id 1tKb63-001VY0-30; Mon, 09 Dec 2024 11:34:35 +0100 From: Oleksij Rempel To: Rob Herring , Krzysztof Kozlowski , Conor Dooley , Maxime Coquelin , Alexandre Torgue , "David S. Miller" , Eric Dumazet , Jakub Kicinski , Paolo Abeni , Woojung Huh , Andrew Lunn Cc: Roan van Dijk , Oleksij Rempel , kernel@pengutronix.de, linux-kernel@vger.kernel.org, netdev@vger.kernel.org, devicetree@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com Subject: [PATCH v2 4/4] arm: dts: stm32: Add Priva E-Measuringbox devicetree Date: Mon, 9 Dec 2024 11:34:34 +0100 Message-Id: <20241209103434.359522-5-o.rempel@pengutronix.de> X-Mailer: git-send-email 2.39.5 In-Reply-To: <20241209103434.359522-1-o.rempel@pengutronix.de> References: <20241209103434.359522-1-o.rempel@pengutronix.de> Precedence: bulk X-Mailing-List: netdev@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-SA-Exim-Connect-IP: 2a0a:edc0:0:c01:1d::a2 X-SA-Exim-Mail-From: ore@pengutronix.de X-SA-Exim-Scanned: No (on metis.whiteo.stw.pengutronix.de); SAEximRunCond expanded to false X-PTX-Original-Recipient: netdev@vger.kernel.org From: Roan van Dijk Introduce the devicetree for the Priva E-Measuringbox board (stm32mp133c-prihmb), based on the STM32MP133 SoC. Signed-off-by: Roan van Dijk Signed-off-by: Oleksij Rempel --- arch/arm/boot/dts/st/Makefile | 1 + arch/arm/boot/dts/st/stm32mp133c-prihmb.dts | 496 ++++++++++++++++++++ 2 files changed, 497 insertions(+) create mode 100644 arch/arm/boot/dts/st/stm32mp133c-prihmb.dts diff --git a/arch/arm/boot/dts/st/Makefile b/arch/arm/boot/dts/st/Makefile index eab3a9bd435f..c4c01415fa85 100644 --- a/arch/arm/boot/dts/st/Makefile +++ b/arch/arm/boot/dts/st/Makefile @@ -29,6 +29,7 @@ dtb-$(CONFIG_ARCH_STM32) += \ stm32h743i-eval.dtb \ stm32h743i-disco.dtb \ stm32h750i-art-pi.dtb \ + stm32mp133c-prihmb.dtb \ stm32mp135f-dhcor-dhsbc.dtb \ stm32mp135f-dk.dtb \ stm32mp151a-prtt1a.dtb \ diff --git a/arch/arm/boot/dts/st/stm32mp133c-prihmb.dts b/arch/arm/boot/dts/st/stm32mp133c-prihmb.dts new file mode 100644 index 000000000000..663b6de1b814 --- /dev/null +++ b/arch/arm/boot/dts/st/stm32mp133c-prihmb.dts @@ -0,0 +1,496 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/dts-v1/; + +#include +#include +#include +#include +#include "stm32mp133.dtsi" +#include "stm32mp13xc.dtsi" +#include "stm32mp13-pinctrl.dtsi" + +/ { + model = "Priva E-Measuringbox board"; + compatible = "pri,prihmb", "st,stm32mp133"; + + aliases { + ethernet0 = ðernet1; + mdio-gpio0 = &mdio0; + mmc0 = &sdmmc1; + mmc1 = &sdmmc2; + serial0 = &uart4; + serial1 = &usart6; + serial2 = &uart7; + }; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + counter-0 { + compatible = "interrupt-counter"; + gpios = <&gpioa 11 GPIO_ACTIVE_HIGH>; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + button-reset { + label = "reset-button"; + linux,code = ; + gpios = <&gpioi 7 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-blue { + function = LED_FUNCTION_HEARTBEAT; + color = ; + gpios = <&gpioa 14 GPIO_ACTIVE_LOW>; + linux,default-trigger = "heartbeat"; + default-state = "off"; + }; + }; + + led-controller-0 { + compatible = "pwm-leds-multicolor"; + + multi-led { + color = ; + function = LED_FUNCTION_STATUS; + max-brightness = <255>; + + led-red { + active-low; + color = ; + pwms = <&pwm2 2 1000000 1>; + }; + + led-green { + active-low; + color = ; + pwms = <&pwm1 1 1000000 1>; + }; + + led-blue { + active-low; + color = ; + pwms = <&pwm1 2 1000000 1>; + }; + }; + }; + + led-controller-1 { + compatible = "pwm-leds-multicolor"; + + multi-led { + color = ; + function = LED_FUNCTION_STATUS; + max-brightness = <255>; + + led-red { + active-low; + color = ; + pwms = <&pwm1 0 1000000 1>; + }; + + led-green { + active-low; + color = ; + pwms = <&pwm2 0 1000000 1>; + }; + + led-blue { + active-low; + color = ; + pwms = <&pwm2 1 1000000 1>; + }; + }; + }; + + /* DP83TD510E PHYs have max MDC rate of 1.75MHz. Since we can't reduce + * stmmac MDC clock without reducing system bus rate, we need to use + * gpio based MDIO bus. + */ + mdio0: mdio { + compatible = "virtual,mdio-gpio"; + #address-cells = <1>; + #size-cells = <0>; + gpios = <&gpiog 2 GPIO_ACTIVE_HIGH + &gpioa 2 GPIO_ACTIVE_HIGH>; + + /* TI DP83TD510E */ + phy0: ethernet-phy@0 { + compatible = "ethernet-phy-id2000.0181"; + reg = <0>; + interrupts-extended = <&gpioa 4 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpioa 3 GPIO_ACTIVE_LOW>; + reset-assert-us = <10>; + reset-deassert-us = <35>; + }; + }; + + memory@c0000000 { + device_type = "memory"; + reg = <0xc0000000 0x10000000>; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + optee@ce000000 { + reg = <0xce000000 0x02000000>; + no-map; + }; + }; +}; + +&adc_1 { + pinctrl-names = "default"; + pinctrl-0 = <&adc_1_pins_a>; + vdda-supply = <®_3v3>; + vref-supply = <®_3v3>; + status = "okay"; +}; + +&adc1 { + status = "okay"; + + channel@0 { /* Fan current PC0*/ + reg = <0>; + st,min-sample-time-ns = <10000>; /* 10µs sampling time */ + }; + channel@11 { /* Fan voltage */ + reg = <11>; + st,min-sample-time-ns = <10000>; /* 10µs sampling time */ + }; + channel@15 { /* Supply voltage */ + reg = <15>; + st,min-sample-time-ns = <10000>; /* 10µs sampling time */ + }; +}; + +&dts { + status = "okay"; +}; + +ðernet1 { + status = "okay"; + pinctrl-0 = <ðernet1_rmii_pins_a>; + pinctrl-1 = <ðernet1_rmii_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + phy-mode = "rmii"; + phy-handle = <&phy0>; +}; + +&i2c1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c1_pins_a>; + pinctrl-1 = <&i2c1_sleep_pins_a>; + clock-frequency = <100000>; + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; + + board-sensor@48 { + compatible = "ti,tmp1075"; + reg = <0x48>; + vs-supply = <®_3v3>; + }; +}; + +&{i2c1_pins_a/pins} { + pinmux = , /* I2C1_SCL */ + ; /* I2C1_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; +}; + +&{i2c1_sleep_pins_a/pins} { + pinmux = , /* I2C1_SCL */ + ; /* I2C1_SDA */ +}; + +&iwdg2 { + timeout-sec = <32>; + status = "okay"; +}; + +/* SD card without Card-detect */ +&sdmmc1 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a &sdmmc1_clk_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a &sdmmc1_clk_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; + broken-cd; + no-sdio; + no-1-8-v; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <®_3v3>; + status = "okay"; +}; + +/* EMMC */ +&sdmmc2 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc2_b4_pins_a &sdmmc2_d47_pins_a &sdmmc2_clk_pins_a>; + pinctrl-1 = <&sdmmc2_b4_od_pins_a &sdmmc2_d47_pins_a &sdmmc2_clk_pins_a>; + pinctrl-2 = <&sdmmc2_b4_sleep_pins_a &sdmmc2_d47_sleep_pins_a>; + non-removable; + no-sd; + no-sdio; + no-1-8-v; + st,neg-edge; + mmc-ddr-3_3v; + bus-width = <8>; + vmmc-supply = <®_3v3>; + status = "okay"; +}; + +&timers1 { + status = "okay"; + /delete-property/dmas; + /delete-property/dma-names; + + pwm1: pwm { + pinctrl-0 = <&pwm1_pins_a>; + pinctrl-1 = <&pwm1_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; +}; + +&timers4 { + status = "okay"; + /delete-property/dmas; + /delete-property/dma-names; + + pwm2: pwm { + pinctrl-0 = <&pwm4_pins_a>; + pinctrl-1 = <&pwm4_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; +}; + +/* Fan PWM */ +&timers5 { + status = "okay"; + + pwm3: pwm { + pinctrl-0 = <&pwm5_pins_a>; + pinctrl-1 = <&pwm5_sleep_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; +}; + +&timers2 { + status = "okay"; + + timer@1 { + status = "okay"; + }; +}; + +&uart4 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&uart4_pins_a>; + pinctrl-1 = <&uart4_sleep_pins_a>; + pinctrl-2 = <&uart4_idle_pins_a>; + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; +}; + +&uart7 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&uart7_pins_a>; + pinctrl-1 = <&uart7_sleep_pins_a>; + pinctrl-2 = <&uart7_idle_pins_a>; + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; +}; + +&usart6 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&usart6_pins_a>; + pinctrl-1 = <&usart6_sleep_pins_a>; + pinctrl-2 = <&usart6_idle_pins_a>; + linux,rs485-enabled-at-boot-time; + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; +}; + +&pinctrl { + adc_1_pins_a: adc1-0 { + pins { + pinmux = , /* ADC1 in0 */ + , /* ADC1 in15 */ + ; /* ADC1 in11 */ + }; + }; + + ethernet1_rmii_pins_a: rmii-0 { + pins1 { + pinmux = , /* ETH1_RMII_TXD0 */ + , /* ETH1_RMII_TXD1 */ + , /* ETH1_RMII_TX_EN */ + ; /* ETH1_RMII_REF_CLK */ + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + pins2 { + pinmux = , /* ETH1_RMII_RXD0 */ + , /* ETH1_RMII_RXD1 */ + ; /* ETH1_RMII_CRS_DV */ + bias-disable; + }; + }; + + ethernet1_rmii_sleep_pins_a: rmii-sleep-0 { + pins1 { + pinmux = , /* ETH1_RMII_TXD0 */ + , /* ETH1_RMII_TXD1 */ + , /* ETH1_RMII_TX_EN */ + , /* ETH1_RMII_RXD0 */ + , /* ETH1_RMII_RXD1 */ + , /* ETH1_RMII_REF_CLK */ + ; /* ETH1_RMII_CRS_DV */ + }; + }; + + pwm1_pins_a: pwm1-0 { + pins { + pinmux = , /* TIM1_CH1 */ + , /* TIM1_CH2 */ + ; /* TIM1_CH3 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm1_sleep_pins_a: pwm1-sleep-0 { + pins { + pinmux = , /* TIM1_CH1 */ + , /* TIM1_CH2 */ + ; /* TIM1_CH3 */ + }; + }; + + pwm4_pins_a: pwm4-0 { + pins { + pinmux = , /* TIM4_CH1 */ + , /* TIM4_CH2 */ + ; /* TIM4_CH3 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm4_sleep_pins_a: pwm4-sleep-0 { + pins { + pinmux = , /* TIM4_CH1 */ + , /* TIM4_CH2 */ + ; /* TIM4_CH3 */ + }; + }; + pwm5_pins_a: pwm5-0 { + pins { + pinmux = ; /* TIM5_CH1 */ + }; + }; + + pwm5_sleep_pins_a: pwm5-sleep-0 { + pins { + pinmux = ; /* TIM5_CH1 */ + }; + }; + + uart7_pins_a: uart7-0 { + pins1 { + pinmux = ; /* UART_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = ; /* UART7_RX */ + bias-pull-up; + }; + }; + + uart7_idle_pins_a: uart7-idle-0 { + pins1 { + pinmux = ; /* UART7_TX */ + }; + pins2 { + pinmux = ; /* UART7_RX */ + bias-pull-up; + }; + }; + + uart7_sleep_pins_a: uart7-sleep-0 { + pins { + pinmux = , /* UART7_TX */ + ; /* UART7_RX */ + }; + }; + + usart6_pins_a: usart6-0 { + pins1 { + pinmux = , /* USART6_TX */ + ; /* USART6_DE */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins2 { + pinmux = ; /* USART6_RX */ + bias-disable; + }; + }; + + usart6_idle_pins_a: usart6-idle-0 { + pins1 { + pinmux = ; /* USART6_TX */ + }; + pins2 { + pinmux = ; /* USART6_DE */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + pins3 { + pinmux = ; /* USART6_RX */ + bias-disable; + }; + }; + + usart6_sleep_pins_a: usart6-sleep-0 { + pins { + pinmux = , /* USART6_TX */ + , /* USART6_DE */ + ; /* USART6_RX */ + }; + }; +};