diff mbox series

[net-next,v3,2/2] net: phy: dp83822: Add support for GPIO2 clock output

Message ID 20241212-dp83822-gpio2-clk-out-v3-2-e4af23490f44@liebherr.com (mailing list archive)
State Accepted
Commit 53e3b540952c14aa190233c173ba56d2987aa527
Delegated to: Netdev Maintainers
Headers show
Series net: phy: dp83822: Add support for GPIO2 clock output | expand

Checks

Context Check Description
netdev/series_format success Posting correctly formatted
netdev/tree_selection success Clearly marked for net-next
netdev/ynl success Generated files up to date; no warnings/errors; no diff in generated;
netdev/fixes_present success Fixes tag not required for -next series
netdev/header_inline success No static functions without inline keyword in header files
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/build_tools success No tools touched, skip
netdev/cc_maintainers success CCed 7 of 7 maintainers
netdev/build_clang success Errors and warnings before: 0 this patch: 0
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/deprecated_api success None detected
netdev/check_selftest success No net selftest shell script
netdev/verify_fixes success No Fixes tag
netdev/build_allmodconfig_warn success Errors and warnings before: 1 this patch: 1
netdev/checkpatch warning WARNING: line length of 86 exceeds 80 columns
netdev/build_clang_rust success No Rust files in patch. Skipping build
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/source_inline success Was 0 now: 0
netdev/contest success net-next-2024-12-13--15-00 (tests: 795)

Commit Message

Dimitri Fedrau via B4 Relay Dec. 12, 2024, 8:44 a.m. UTC 
From: Dimitri Fedrau <dimitri.fedrau@liebherr.com>

The GPIO2 pin on the DP83822 can be configured as clock output. Add support
for configuration via DT.

Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com>
---
 drivers/net/phy/dp83822.c | 48 +++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 48 insertions(+)

Comments

Andrew Lunn Dec. 13, 2024, 10:08 a.m. UTC | #1 
On Thu, Dec 12, 2024 at 09:44:07AM +0100, Dimitri Fedrau via B4 Relay wrote:
> From: Dimitri Fedrau <dimitri.fedrau@liebherr.com>
> 
> The GPIO2 pin on the DP83822 can be configured as clock output. Add support
> for configuration via DT.
> 
> Signed-off-by: Dimitri Fedrau <dimitri.fedrau@liebherr.com>

Reviewed-by: Andrew Lunn <andrew@lunn.ch>

    Andrew
diff mbox series

Patch

diff --git a/drivers/net/phy/dp83822.c b/drivers/net/phy/dp83822.c
index 25ee09c48027c86b7d8f4acb5cbe2e157c56a85a..334c17a68edd7c2a0f707b3ccafaa7a870818fbe 100644
--- a/drivers/net/phy/dp83822.c
+++ b/drivers/net/phy/dp83822.c
@@ -30,6 +30,7 @@ 
 #define MII_DP83822_FCSCR	0x14
 #define MII_DP83822_RCSR	0x17
 #define MII_DP83822_RESET_CTRL	0x1f
+#define MII_DP83822_IOCTRL2	0x463
 #define MII_DP83822_GENCFG	0x465
 #define MII_DP83822_SOR1	0x467
 
@@ -104,6 +105,18 @@ 
 #define DP83822_RX_CLK_SHIFT	BIT(12)
 #define DP83822_TX_CLK_SHIFT	BIT(11)
 
+/* IOCTRL2 bits */
+#define DP83822_IOCTRL2_GPIO2_CLK_SRC		GENMASK(6, 4)
+#define DP83822_IOCTRL2_GPIO2_CTRL		GENMASK(2, 0)
+#define DP83822_IOCTRL2_GPIO2_CTRL_CLK_REF	GENMASK(1, 0)
+
+#define DP83822_CLK_SRC_MAC_IF			0x0
+#define DP83822_CLK_SRC_XI			0x1
+#define DP83822_CLK_SRC_INT_REF			0x2
+#define DP83822_CLK_SRC_RMII_MASTER_MODE_REF	0x4
+#define DP83822_CLK_SRC_FREE_RUNNING		0x6
+#define DP83822_CLK_SRC_RECOVERED		0x7
+
 /* SOR1 mode */
 #define DP83822_STRAP_MODE1	0
 #define DP83822_STRAP_MODE2	BIT(0)
@@ -139,6 +152,8 @@  struct dp83822_private {
 	u8 cfg_dac_minus;
 	u8 cfg_dac_plus;
 	struct ethtool_wolinfo wol;
+	bool set_gpio2_clk_out;
+	u32 gpio2_clk_out;
 };
 
 static int dp83822_config_wol(struct phy_device *phydev,
@@ -413,6 +428,15 @@  static int dp83822_config_init(struct phy_device *phydev)
 	int err = 0;
 	int bmcr;
 
+	if (dp83822->set_gpio2_clk_out)
+		phy_modify_mmd(phydev, MDIO_MMD_VEND2, MII_DP83822_IOCTRL2,
+			       DP83822_IOCTRL2_GPIO2_CTRL |
+			       DP83822_IOCTRL2_GPIO2_CLK_SRC,
+			       FIELD_PREP(DP83822_IOCTRL2_GPIO2_CTRL,
+					  DP83822_IOCTRL2_GPIO2_CTRL_CLK_REF) |
+			       FIELD_PREP(DP83822_IOCTRL2_GPIO2_CLK_SRC,
+					  dp83822->gpio2_clk_out));
+
 	if (phy_interface_is_rgmii(phydev)) {
 		rx_int_delay = phy_get_internal_delay(phydev, dev, NULL, 0,
 						      true);
@@ -611,6 +635,7 @@  static int dp83822_of_init(struct phy_device *phydev)
 {
 	struct dp83822_private *dp83822 = phydev->priv;
 	struct device *dev = &phydev->mdio.dev;
+	const char *of_val;
 
 	/* Signal detection for the PHY is only enabled if the FX_EN and the
 	 * SD_EN pins are strapped. Signal detection can only enabled if FX_EN
@@ -623,6 +648,29 @@  static int dp83822_of_init(struct phy_device *phydev)
 		dp83822->fx_enabled = device_property_present(dev,
 							      "ti,fiber-mode");
 
+	if (!device_property_read_string(dev, "ti,gpio2-clk-out", &of_val)) {
+		if (strcmp(of_val, "mac-if") == 0) {
+			dp83822->gpio2_clk_out = DP83822_CLK_SRC_MAC_IF;
+		} else if (strcmp(of_val, "xi") == 0) {
+			dp83822->gpio2_clk_out = DP83822_CLK_SRC_XI;
+		} else if (strcmp(of_val, "int-ref") == 0) {
+			dp83822->gpio2_clk_out = DP83822_CLK_SRC_INT_REF;
+		} else if (strcmp(of_val, "rmii-master-mode-ref") == 0) {
+			dp83822->gpio2_clk_out = DP83822_CLK_SRC_RMII_MASTER_MODE_REF;
+		} else if (strcmp(of_val, "free-running") == 0) {
+			dp83822->gpio2_clk_out = DP83822_CLK_SRC_FREE_RUNNING;
+		} else if (strcmp(of_val, "recovered") == 0) {
+			dp83822->gpio2_clk_out = DP83822_CLK_SRC_RECOVERED;
+		} else {
+			phydev_err(phydev,
+				   "Invalid value for ti,gpio2-clk-out property (%s)\n",
+				   of_val);
+			return -EINVAL;
+		}
+
+		dp83822->set_gpio2_clk_out = true;
+	}
+
 	return 0;
 }