@@ -1398,6 +1398,23 @@ static int phy_enable_interrupts(struct phy_device *phydev)
return phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED);
}
+/**
+ * phy_update_stats - Update PHY device statistics if supported.
+ * @phydev: Pointer to the PHY device structure.
+ *
+ * If the PHY driver provides an update_stats callback, this function
+ * invokes it to update the PHY statistics. If not, it returns 0.
+ *
+ * Return: 0 on success, or a negative error code if the callback fails.
+ */
+static int phy_update_stats(struct phy_device *phydev)
+{
+ if (!phydev->drv->update_stats)
+ return 0;
+
+ return phydev->drv->update_stats(phydev);
+}
+
/**
* phy_request_interrupt - request and enable interrupt for a PHY device
* @phydev: target phy_device struct
@@ -1467,6 +1484,9 @@ static enum phy_state_work _phy_state_machine(struct phy_device *phydev)
case PHY_RUNNING:
err = phy_check_link_status(phydev);
func = &phy_check_link_status;
+
+ if (!err)
+ err = phy_update_stats(phydev);
break;
case PHY_CABLETEST:
err = phydev->drv->cable_test_get_status(phydev, &finished);
@@ -1180,6 +1180,24 @@ struct phy_driver {
*/
void (*get_link_stats)(struct phy_device *dev,
struct ethtool_link_ext_stats *link_stats);
+
+ /**
+ * @update_stats: Trigger periodic statistics updates.
+ * @dev: The PHY device for which statistics updates are triggered.
+ *
+ * Periodically gathers statistics from the PHY device to update locally
+ * maintained 64-bit counters. This is necessary for PHYs that implement
+ * reduced-width counters (e.g., 16-bit or 32-bit) which can overflow
+ * more frequently compared to 64-bit counters. By invoking this
+ * callback, drivers can fetch the current counter values, handle
+ * overflow detection, and accumulate the results into local 64-bit
+ * counters for accurate reporting through the `get_phy_stats` and
+ * `get_link_stats` interfaces.
+ *
+ * Return: 0 on success or a negative error code on failure.
+ */
+ int (*update_stats)(struct phy_device *dev);
+
/** @get_sset_count: Number of statistic counters */
int (*get_sset_count)(struct phy_device *dev);
/** @get_strings: Names of the statistic counters */
@@ -1670,6 +1688,9 @@ static inline bool phy_polling_mode(struct phy_device *phydev)
if (phydev->drv->flags & PHY_POLL_CABLE_TEST)
return true;
+ if (phydev->drv->update_stats)
+ return true;
+
return phydev->irq == PHY_POLL;
}
Add an optional polling interface for PHY statistics to simplify driver implementation. Signed-off-by: Oleksij Rempel <o.rempel@pengutronix.de> --- changes v3: - update commit message changes v2: - drop PHY_POLL_STATS - add function comments --- drivers/net/phy/phy.c | 20 ++++++++++++++++++++ include/linux/phy.h | 21 +++++++++++++++++++++ 2 files changed, 41 insertions(+)