diff mbox series

[net-next,12/13] net: enetc: add loopback support for i.MX95 ENETC PF

Message ID 20250103060610.2233908-13-wei.fang@nxp.com (mailing list archive)
State Changes Requested
Delegated to: Netdev Maintainers
Headers show
Series Add more feautues for ENETC v4 - round 2 | expand

Checks

Context Check Description
netdev/series_format success Posting correctly formatted
netdev/tree_selection success Clearly marked for net-next
netdev/ynl success Generated files up to date; no warnings/errors; no diff in generated;
netdev/fixes_present success Fixes tag not required for -next series
netdev/header_inline success No static functions without inline keyword in header files
netdev/build_32bit success Errors and warnings before: 1 this patch: 1
netdev/build_tools success No tools touched, skip
netdev/cc_maintainers success CCed 10 of 10 maintainers
netdev/build_clang success Errors and warnings before: 5 this patch: 5
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/deprecated_api success None detected
netdev/check_selftest success No net selftest shell script
netdev/verify_fixes success No Fixes tag
netdev/build_allmodconfig_warn success Errors and warnings before: 1 this patch: 1
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 41 lines checked
netdev/build_clang_rust success No Rust files in patch. Skipping build
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/source_inline success Was 0 now: 0

Commit Message

Wei Fang Jan. 3, 2025, 6:06 a.m. UTC 
Add internal loopback support for i.MX95 ENETC PF, the default loopback
mode is MAC level loopback, the MAC Tx data is looped back onto the Rx.
The MAC interface runs at a fixed 1:8 ratio of NETC clock in MAC-level
loopback mode, with no dependency on Tx clock.

Signed-off-by: Wei Fang <wei.fang@nxp.com>
---
 .../net/ethernet/freescale/enetc/enetc4_pf.c   | 18 ++++++++++++++++++
 .../ethernet/freescale/enetc/enetc_pf_common.c |  4 +---
 2 files changed, 19 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/freescale/enetc/enetc4_pf.c b/drivers/net/ethernet/freescale/enetc/enetc4_pf.c
index e2eca28eec06..d460d75647f7 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc4_pf.c
+++ b/drivers/net/ethernet/freescale/enetc/enetc4_pf.c
@@ -709,6 +709,21 @@  static void enetc4_pf_set_rx_mode(struct net_device *ndev)
 	queue_work(si->workqueue, &si->rx_mode_task);
 }
 
+static void enetc4_pf_set_loopback(struct net_device *ndev, bool en)
+{
+	struct enetc_ndev_priv *priv = netdev_priv(ndev);
+	struct enetc_si *si = priv->si;
+	u32 val;
+
+	val = enetc_port_mac_rd(si, ENETC4_PM_CMD_CFG(0));
+	val = u32_replace_bits(val, en ? 1 : 0, PM_CMD_CFG_LOOP_EN);
+	/* Default to select MAC level loopback mode if loopback is enabled. */
+	val = u32_replace_bits(val, en ? LPBCK_MODE_MAC_LEVEL : 0,
+			       PM_CMD_CFG_LPBK_MODE);
+
+	enetc_port_mac_wr(si, ENETC4_PM_CMD_CFG(0), val);
+}
+
 static int enetc4_pf_set_features(struct net_device *ndev,
 				  netdev_features_t features)
 {
@@ -722,6 +737,9 @@  static int enetc4_pf_set_features(struct net_device *ndev,
 		enetc4_pf_set_si_vlan_promisc(hw, 0, promisc_en);
 	}
 
+	if (changed & NETIF_F_LOOPBACK)
+		enetc4_pf_set_loopback(ndev, !!(features & NETIF_F_LOOPBACK));
+
 	enetc_set_features(ndev, features);
 
 	return 0;
diff --git a/drivers/net/ethernet/freescale/enetc/enetc_pf_common.c b/drivers/net/ethernet/freescale/enetc/enetc_pf_common.c
index 3f7ccc482301..0a2b8769a175 100644
--- a/drivers/net/ethernet/freescale/enetc/enetc_pf_common.c
+++ b/drivers/net/ethernet/freescale/enetc/enetc_pf_common.c
@@ -134,10 +134,8 @@  void enetc_pf_netdev_setup(struct enetc_si *si, struct net_device *ndev,
 	}
 
 	/* TODO: currently, i.MX95 ENETC driver does not support advanced features */
-	if (!is_enetc_rev1(si)) {
-		ndev->hw_features &= ~NETIF_F_LOOPBACK;
+	if (!is_enetc_rev1(si))
 		goto end;
-	}
 
 	ndev->xdp_features = NETDEV_XDP_ACT_BASIC | NETDEV_XDP_ACT_REDIRECT |
 			     NETDEV_XDP_ACT_NDO_XMIT | NETDEV_XDP_ACT_RX_SG |