@@ -9,6 +9,7 @@
#include <linux/interrupt.h>
#include <linux/irqdomain.h>
#include <linux/mii.h>
+#include <linux/string_choices.h>
#include "chip.h"
#include "global2.h"
@@ -748,7 +749,7 @@ static int mv88e6393x_sgmii_apply_2500basex_an(struct mv88e639x_pcs *mpcs,
if (err)
dev_err(mpcs->mdio.dev.parent,
"failed to %s 2500basex fix: %pe\n",
- enable ? "enable" : "disable", ERR_PTR(err));
+ str_enable_disable(enable), ERR_PTR(err));
return err;
}
@@ -13,6 +13,7 @@
#include <linux/phy.h>
#include <linux/phylink.h>
#include <linux/property.h>
+#include <linux/string_choices.h>
#include "chip.h"
#include "global2.h"
@@ -176,7 +177,7 @@ int mv88e6xxx_port_set_link(struct mv88e6xxx_chip *chip, int port, int link)
dev_dbg(chip->dev, "p%d: %s link %s\n", port,
reg & MV88E6XXX_PORT_MAC_CTL_FORCE_LINK ? "Force" : "Unforce",
- reg & MV88E6XXX_PORT_MAC_CTL_LINK_UP ? "up" : "down");
+ str_up_down(reg & MV88E6XXX_PORT_MAC_CTL_LINK_UP));
return 0;
}
@@ -21,6 +21,7 @@
#include <linux/irqchip/chained_irq.h>
#include <linux/of_irq.h>
#include <linux/regmap.h>
+#include <linux/string_choices.h>
#include "realtek.h"
#include "realtek-smi.h"
@@ -1522,7 +1523,7 @@ static int rtl8366rb_vlan_filtering(struct dsa_switch *ds, int port,
rb = priv->chip_data;
dev_dbg(priv->dev, "port %d: %s VLAN filtering\n", port,
- vlan_filtering ? "enable" : "disable");
+ str_enable_disable(vlan_filtering));
/* If the port is not in the member set, the frame will be dropped */
ret = regmap_update_bits(priv->map, RTL8366RB_VLAN_INGRESS_CTRL2_REG,
@@ -1884,7 +1885,7 @@ static bool rtl8366rb_is_vlan_valid(struct realtek_priv *priv, unsigned int vlan
static int rtl8366rb_enable_vlan(struct realtek_priv *priv, bool enable)
{
- dev_dbg(priv->dev, "%s VLAN\n", enable ? "enable" : "disable");
+ dev_dbg(priv->dev, "%s VLAN\n", str_enable_disable(enable));
return regmap_update_bits(priv->map,
RTL8366RB_SGCR, RTL8366RB_SGCR_EN_VLAN,
enable ? RTL8366RB_SGCR_EN_VLAN : 0);
@@ -1892,7 +1893,7 @@ static int rtl8366rb_enable_vlan(struct realtek_priv *priv, bool enable)
static int rtl8366rb_enable_vlan4k(struct realtek_priv *priv, bool enable)
{
- dev_dbg(priv->dev, "%s VLAN 4k\n", enable ? "enable" : "disable");
+ dev_dbg(priv->dev, "%s VLAN 4k\n", str_enable_disable(enable));
return regmap_update_bits(priv->map, RTL8366RB_SGCR,
RTL8366RB_SGCR_EN_VLAN_4KTB,
enable ? RTL8366RB_SGCR_EN_VLAN_4KTB : 0);
Replace ternary (condition ? "enable" : "disable") syntax with helpers from string_choices.h because: 1. Simple function call with one argument is easier to read. Ternary operator has three arguments and with wrapping might lead to quite long code. 2. Is slightly shorter thus also easier to read. 3. It brings uniformity in the text - same string. 4. Allows deduping by the linker, which results in a smaller binary file. Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> --- I have more of similar patches in progress, but before I start spamming you with this let me know if you find such code more readable, specially for more complex conditions in ternary operators. drivers/net/dsa/mv88e6xxx/pcs-639x.c | 3 ++- drivers/net/dsa/mv88e6xxx/port.c | 3 ++- drivers/net/dsa/realtek/rtl8366rb.c | 7 ++++--- 3 files changed, 8 insertions(+), 5 deletions(-)