[v1,3/3] arm: dts: stm32: Add Plymovent AQM devicetree

Message ID	20250207143226.2026099-4-o.rempel@pengutronix.de (mailing list archive)
State	Superseded
Headers	show Received: from metis.whiteo.stw.pengutronix.de (metis.whiteo.stw.pengutronix.de [185.203.201.7]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 9A50223F278 for <netdev@vger.kernel.org>; Fri, 7 Feb 2025 14:32:58 +0000 (UTC) From: Oleksij Rempel <o.rempel@pengutronix.de> To: Rob Herring <robh@kernel.org>, Krzysztof Kozlowski <krzk+dt@kernel.org>, Conor Dooley <conor+dt@kernel.org>, Maxime Coquelin <mcoquelin.stm32@gmail.com>, Alexandre Torgue <alexandre.torgue@foss.st.com>, "David S. Miller" <davem@davemloft.net>, Eric Dumazet <edumazet@google.com>, Jakub Kicinski <kuba@kernel.org>, Paolo Abeni <pabeni@redhat.com>, Woojung Huh <woojung.huh@microchip.com>, Andrew Lunn <andrew+netdev@lunn.ch> Cc: Oleksij Rempel <o.rempel@pengutronix.de>, kernel@pengutronix.de, linux-kernel@vger.kernel.org, netdev@vger.kernel.org, devicetree@vger.kernel.org, linux-stm32@st-md-mailman.stormreply.com Subject: [PATCH v1 3/3] arm: dts: stm32: Add Plymovent AQM devicetree Date: Fri, 7 Feb 2025 15:32:26 +0100 Message-Id: <20250207143226.2026099-4-o.rempel@pengutronix.de> In-Reply-To: <20250207143226.2026099-1-o.rempel@pengutronix.de> References: <20250207143226.2026099-1-o.rempel@pengutronix.de> Precedence: bulk MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit
Series	Add support for Plymovent AQM board \| expand [v1,0/3] Add support for Plymovent AQM board [v1,1/3] dt-bindings: sound: convert ICS-43432 binding to YAML [v1,2/3] dt-bindings: arm: stm32: Add Plymovent AQM board [v1,3/3] arm: dts: stm32: Add Plymovent AQM devicetree

Context	Check	Description
netdev/tree_selection	success	Not a local patch

diff --git a/arch/arm/boot/dts/st/Makefile b/arch/arm/boot/dts/st/Makefile index d8f297035812..561819ef7a32 100644 --- a/arch/arm/boot/dts/st/Makefile +++ b/arch/arm/boot/dts/st/Makefile @@ -38,6 +38,7 @@ dtb-$(CONFIG_ARCH_STM32) += \ stm32mp151a-dhcor-testbench.dtb \ stm32mp151c-mecio1r0.dtb \ stm32mp151c-mect1s.dtb \ + stm32mp151c-plyaqm.dtb \ stm32mp153c-dhcom-drc02.dtb \ stm32mp153c-dhcor-drc-compact.dtb \ stm32mp153c-lxa-tac-gen3.dtb \ diff --git a/arch/arm/boot/dts/st/stm32mp151c-plyaqm.dts b/arch/arm/boot/dts/st/stm32mp151c-plyaqm.dts new file mode 100644 index 000000000000..7d251289450b --- /dev/null +++ b/arch/arm/boot/dts/st/stm32mp151c-plyaqm.dts @@ -0,0 +1,697 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR BSD-3-Clause) +/dts-v1/; + +#include <arm/st/stm32mp151.dtsi> +#include <arm/st/stm32mp15xc.dtsi> +#include <arm/st/stm32mp15-pinctrl.dtsi> +#include <arm/st/stm32mp15xxad-pinctrl.dtsi> +#include <arm/st/stm32mp15-scmi.dtsi> +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/leds/common.h> + +/ { + model = "Plymovent AQM board"; + compatible = "ply,plyaqm", "st,stm32mp151"; + + aliases { + ethernet0 = &ethernet0; + serial0 = &uart4; + serial1 = &uart7; + }; + + codec { + compatible = "invensense,ics43432"; + + port { + codec_endpoint: endpoint { + remote-endpoint = <&i2s1_endpoint>; + dai-format = "i2s"; + }; + }; + }; + + firmware { + optee { + compatible = "linaro,optee-tz"; + method = "smc"; + }; + }; + + leds { + compatible = "gpio-leds"; + + led-0 { + gpios = <&gpioa 3 GPIO_ACTIVE_HIGH>; /* WHITE_EN */ + color = <LED_COLOR_ID_WHITE>; + default-state = "on"; + }; + }; + + v3v3: fixed-regulator-v3v3 { + compatible = "regulator-fixed"; + regulator-name = "v3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + }; + + v5v_sw: fixed-regulator-v5sw { + compatible = "regulator-fixed"; + regulator-name = "5v-switched"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + gpio = <&gpioe 10 GPIO_ACTIVE_HIGH>; /* 5V_SWITCHED_EN */ + startup-delay-us = <100000>; + enable-active-high; + regulator-boot-on; + }; + + reserved-memory { + #address-cells = <1>; + #size-cells = <1>; + ranges; + + optee@cfd00000 { + reg = <0xcfd00000 0x300000>; + no-map; + }; + }; + + sound { + compatible = "audio-graph-card"; + label = "STM32MP15"; + dais = <&i2s1_port>; + }; + + wifi_pwrseq: wifi-pwrseq { + compatible = "mmc-pwrseq-simple"; + reset-gpios = <&gpioe 12 GPIO_ACTIVE_LOW>; /* WLAN_REG_ON */ + }; +}; + +&adc { + pinctrl-names = "default"; + pinctrl-0 = <&adc1_in10_aqm_pins_a>; + vdda-supply = <&v3v3>; + vref-supply = <&v3v3>; + status = "okay"; + + adc@0 { + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + channel@10 { /* NTC */ + reg = <10>; + st,min-sample-time-ns = <10000>; /* 10µs sampling time */ + }; + }; +}; + +&cpu0 { + clocks = <&scmi_clk CK_SCMI_MPU>; +}; + +&cryp1 { + clocks = <&scmi_clk CK_SCMI_CRYP1>; + resets = <&scmi_reset RST_SCMI_CRYP1>; + status = "okay"; +}; + +&ethernet0 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&ethernet0_rmii_aqm_pins_a>; + pinctrl-1 = <&ethernet0_rmii_sleep_aqm_pins_a>; + phy-mode = "rmii"; + max-speed = <100>; + phy-handle = <&ethphy0>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + + /* KSZ8081RNA PHY */ + ethphy0: ethernet-phy@0 { + reg = <0>; + interrupts-extended = <&gpiob 0 IRQ_TYPE_LEVEL_LOW>; + reset-gpios = <&gpiob 1 GPIO_ACTIVE_LOW>; + reset-assert-us = <10000>; + reset-deassert-us = <300>; + }; + }; +}; + +&gpioa { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "", "HWID_PL_N", "HWID_CP", ""; +}; + +&gpiob { + gpio-line-names = + "", "", "", "", "", "", "LED_LATCH", "", + "", "RELAY1_EN", "", "", "", "", "", ""; +}; + +&gpioc { + gpio-line-names = + "", "", "", "", "", "", "", "", + "", "", "", "", "", "HWID_Q7", "", ""; +}; + +&gpioe { + gpio-line-names = + "", "", "", "", "RELAY2_EN", "", "", "", + "", "", "", "", "", "", "", ""; +}; + +&gpiog { + gpio-line-names = + "", "", "", "", "", "", "", "SW1", + "", "", "", "", "", "", "", ""; +}; + +&gpioz { + clocks = <&scmi_clk CK_SCMI_GPIOZ>; +}; + +&hash1 { + clocks = <&scmi_clk CK_SCMI_HASH1>; + resets = <&scmi_reset RST_SCMI_HASH1>; +}; + +&i2c1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c1_aqm_pins_a>; + pinctrl-1 = <&i2c1_sleep_aqm_pins_a>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + /delete-property/dmas; + /delete-property/dma-names; + + /* CYPD3177 USB PD controller 0x08 */ +}; + +&i2c4 { + clocks = <&scmi_clk CK_SCMI_I2C4>; + resets = <&scmi_reset RST_SCMI_I2C4>; +}; + +&i2c6 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2c6_aqm_pins_a>; + pinctrl-1 = <&i2c6_sleep_aqm_pins_a>; + i2c-scl-rising-time-ns = <185>; + i2c-scl-falling-time-ns = <20>; + clocks = <&scmi_clk CK_SCMI_I2C6>; + resets = <&scmi_reset RST_SCMI_I2C6>; + status = "okay"; + /delete-property/dmas; + /delete-property/dma-names; + + pm-sensor@69 { + compatible = "sensirion,sps30"; + reg = <0x69>; + }; + + co2-sensor@62 { + compatible = "sensirion,scd41"; + reg = <0x62>; + vdd-supply = <&v5v_sw>; + }; + + pressure-sensor@47 { + compatible = "bosch,bmp580"; + reg = <0x47>; + vdda-supply = <&v5v_sw>; + vddd-supply = <&v5v_sw>; + }; + + /* Used for ZMOD4410 in userspace */ +}; + +&i2s1 { + pinctrl-names = "default", "sleep"; + pinctrl-0 = <&i2s1_aqm_pins>; + pinctrl-1 = <&i2s1_sleep_aqm_pins>; + clocks = <&rcc SPI1>, <&rcc SPI1_K>, <&rcc PLL3_Q>, <&rcc PLL3_R>; + clock-names = "pclk", "i2sclk", "x8k", "x11k"; + #clock-cells = <0>; /* Set I2S2 as master clock provider */ + status = "okay"; + + i2s1_port: port { + i2s1_endpoint: endpoint { + format = "i2s"; + mclk-fs = <256>; + remote-endpoint = <&codec_endpoint>; + }; + }; +}; + +&iwdg2 { + clocks = <&rcc IWDG2>, <&scmi_clk CK_SCMI_LSI>; + status = "okay"; +}; + +&m4_rproc { + /delete-property/ st,syscfg-holdboot; + resets = <&scmi_reset RST_SCMI_MCU>, + <&scmi_reset RST_SCMI_MCU_HOLD_BOOT>; + reset-names = "mcu_rst", "hold_boot"; +}; + +&mdma1 { + resets = <&scmi_reset RST_SCMI_MDMA>; +}; + +&rcc { + compatible = "st,stm32mp1-rcc-secure", "syscon"; + clock-names = "hse", "hsi", "csi", "lse", "lsi"; + clocks = <&scmi_clk CK_SCMI_HSE>, + <&scmi_clk CK_SCMI_HSI>, + <&scmi_clk CK_SCMI_CSI>, + <&scmi_clk CK_SCMI_LSE>, + <&scmi_clk CK_SCMI_LSI>; +}; + +&rng1 { + clocks = <&scmi_clk CK_SCMI_RNG1>; + resets = <&scmi_reset RST_SCMI_RNG1>; + status = "okay"; +}; + +&rtc { + clocks = <&scmi_clk CK_SCMI_RTCAPB>, <&scmi_clk CK_SCMI_RTC>; +}; + +/* SD card without Card-detect */ +&sdmmc1 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc1_b4_pins_a>; + pinctrl-1 = <&sdmmc1_b4_od_pins_a>; + pinctrl-2 = <&sdmmc1_b4_sleep_pins_a>; + broken-cd; + no-sdio; + no-1-8-v; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&v3v3>; + status = "okay"; +}; + +/* EMMC */ +&sdmmc2 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc2_b4_aqm_pins_a>; + pinctrl-1 = <&sdmmc2_b4_od_aqm_pins_a>; + pinctrl-2 = <&sdmmc2_b4_sleep_aqm_pins_a>; + non-removable; + no-sd; + no-sdio; + no-1-8-v; + st,neg-edge; + bus-width = <8>; + vmmc-supply = <&v3v3>; + status = "okay"; +}; + +/* Wifi */ +&sdmmc3 { + pinctrl-names = "default", "opendrain", "sleep"; + pinctrl-0 = <&sdmmc3_b4_aqm_pins_a>; + pinctrl-1 = <&sdmmc3_b4_od_aqm_pins_a>; + pinctrl-2 = <&sdmmc3_b4_sleep_aqm_pins_a>; + non-removable; + st,neg-edge; + bus-width = <4>; + vmmc-supply = <&v3v3>; + mmc-pwrseq = <&wifi_pwrseq>; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + wifi@1 { + reg = <1>; + compatible = "brcm,bcm4329-fmac"; + }; +}; + +&spi2 { + pinctrl-names = "default"; + pinctrl-0 = <&spi2_aqm_pins_a>; + status = "disabled"; + + spidev@0 { + compatible = "dh,dhcom-board"; /* Needed for spidev in userspace */ + reg = <0>; + spi-max-frequency = <4000000>; + }; +}; + +&timers5 { + status = "okay"; + /delete-property/dmas; + /delete-property/dma-names; + + pwm { + pinctrl-0 = <&pwm1_aqm_pins_a>; + pinctrl-1 = <&pwm1_sleep_aqm_pins_a>; + pinctrl-names = "default", "sleep"; + status = "okay"; + }; +}; + +&uart4 { + pinctrl-names = "default", "sleep", "idle"; + pinctrl-0 = <&uart4_aqm_pins_a>; + pinctrl-1 = <&uart4_idle_aqm_pins_a>; + pinctrl-2 = <&uart4_sleep_aqm_pins_a>; + /delete-property/dmas; + /delete-property/dma-names; + status = "okay"; +}; + +&uart7 { + pinctrl-names = "default"; + pinctrl-0 = <&uart7_aqm_pins_a>; + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + shutdown-gpios = <&gpioe 11 GPIO_ACTIVE_HIGH>; /* BT_REG_ON */ + max-speed = <4000000>; + vbat-supply = <&v3v3>; + vddio-supply = <&v3v3>; + interrupt-parent = <&gpiog>; + interrupts = <12 IRQ_TYPE_EDGE_RISING>; /* BT_HOST_WAKE */ + interrupt-names = "host-wakeup"; + }; +}; + +&pinctrl { + adc1_in10_aqm_pins_a: adc1in10-0 { + pins { + pinmux = <STM32_PINMUX('C', 0, ANALOG)>; /* NTC */ + }; + }; + + ethernet0_rmii_aqm_pins_a: rmii-0 { + pins1 { + pinmux = <STM32_PINMUX('B', 12, AF11)>, /* ETH1_RMII_TXD0 */ + <STM32_PINMUX('B', 13, AF11)>, /* ETH1_RMII_TXD1 */ + <STM32_PINMUX('B', 11, AF11)>, /* ETH1_RMII_TX_EN */ + <STM32_PINMUX('A', 1, AF11)>, /* ETH1_RMII_REF_CLK */ + <STM32_PINMUX('A', 2, AF11)>, /* ETH1_MDIO */ + <STM32_PINMUX('C', 1, AF11)>; /* ETH1_MDC */ + bias-disable; + drive-push-pull; + slew-rate = <2>; + }; + + pins2 { + pinmux = <STM32_PINMUX('C', 4, AF11)>, /* ETH1_RMII_RXD0 */ + <STM32_PINMUX('C', 5, AF11)>, /* ETH1_RMII_RXD1 */ + <STM32_PINMUX('A', 7, AF11)>; /* ETH1_RMII_CRS_DV */ + bias-disable; + }; + }; + + ethernet0_rmii_sleep_aqm_pins_a: rmii-sleep-0 { + pins1 { + pinmux = <STM32_PINMUX('B', 12, ANALOG)>, /* ETH1_RMII_TXD0 */ + <STM32_PINMUX('B', 13, ANALOG)>, /* ETH1_RMII_TXD1 */ + <STM32_PINMUX('B', 11, ANALOG)>, /* ETH1_RMII_TX_EN */ + <STM32_PINMUX('A', 2, ANALOG)>, /* ETH1_MDIO */ + <STM32_PINMUX('C', 1, ANALOG)>, /* ETH1_MDC */ + <STM32_PINMUX('C', 4, ANALOG)>, /* ETH1_RMII_RXD0 */ + <STM32_PINMUX('C', 5, ANALOG)>, /* ETH1_RMII_RXD1 */ + <STM32_PINMUX('A', 1, ANALOG)>, /* ETH1_RMII_REF_CLK */ + <STM32_PINMUX('A', 7, ANALOG)>; /* ETH1_RMII_CRS_DV */ + }; + }; + + /* i2c1 pins redefined because they differ from stm32mp15-pinctrl.dtsi */ + i2c1_aqm_pins_a: i2c1-0 { + pins { + pinmux = <STM32_PINMUX('D', 12, AF5)>, /* I2C1_SCL */ + <STM32_PINMUX('D', 13, AF5)>; /* I2C1_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c1_sleep_aqm_pins_a: i2c1-sleep-0 { + pins { + pinmux = <STM32_PINMUX('D', 12, ANALOG)>, /* I2C1_SCL */ + <STM32_PINMUX('D', 13, ANALOG)>; /* I2C1_SDA */ + }; + }; + + /* i2c6 pins redefined because they differ from stm32mp15-pinctrl.dtsi */ + i2c6_aqm_pins_a: i2c6-0 { + pins { + pinmux = <STM32_PINMUX('A', 11, AF2)>, /* I2C6_SCL */ + <STM32_PINMUX('A', 12, AF2)>; /* I2C6_SDA */ + bias-disable; + drive-open-drain; + slew-rate = <0>; + }; + }; + + i2c6_sleep_aqm_pins_a: i2c6-sleep-0 { + pins { + pinmux = <STM32_PINMUX('A', 11, ANALOG)>, /* I2C6_SCL */ + <STM32_PINMUX('A', 12, ANALOG)>; /* I2C6_SDA */ + }; + }; + + i2s1_aqm_pins: i2s1-0 { + pins { + pinmux = <STM32_PINMUX('A', 6, AF5)>, /* I2S2_SDI */ + <STM32_PINMUX('A', 4, AF5)>, /* I2S2_WS */ + <STM32_PINMUX('A', 5, AF5)>; /* I2S2_CK */ + slew-rate = <0>; + drive-push-pull; + bias-disable; + }; + }; + + i2s1_sleep_aqm_pins: i2s1-sleep-0 { + pins { + pinmux = <STM32_PINMUX('A', 6, ANALOG)>, /* I2S2_SDI */ + <STM32_PINMUX('A', 4, ANALOG)>, /* I2S2_WS */ + <STM32_PINMUX('A', 5, ANALOG)>; /* I2S2_CK */ + }; + }; + + pwm1_aqm_pins_a: pwm1-0 { + pins { + pinmux = <STM32_PINMUX('A', 0, AF2)>; /* TIM5_CH1 */ + bias-pull-down; + drive-push-pull; + slew-rate = <0>; + }; + }; + + pwm1_sleep_aqm_pins_a: pwm1-sleep-0 { + pins { + pinmux = <STM32_PINMUX('A', 0, ANALOG)>; + }; + }; + + /* SDMMC1 pins same as stm32mp15-pinctrl.dtsi */ + + sdmmc2_b4_sleep_aqm_pins_a: sdmmc2-b4-sleep-0 { + pins { + pinmux = <STM32_PINMUX('B', 14, ANALOG)>, /* SDMMC2_D0 */ + <STM32_PINMUX('B', 7, ANALOG)>, /* SDMMC2_D1 */ + <STM32_PINMUX('B', 3, ANALOG)>, /* SDMMC2_D2 */ + <STM32_PINMUX('B', 4, ANALOG)>, /* SDMMC2_D3 */ + <STM32_PINMUX('A', 8, ANALOG)>, /* SDMMC2_D4 */ + <STM32_PINMUX('A', 9, ANALOG)>, /* SDMMC2_D5 */ + <STM32_PINMUX('C', 6, ANALOG)>, /* SDMMC2_D6 */ + <STM32_PINMUX('C', 7, ANALOG)>, /* SDMMC2_D7 */ + <STM32_PINMUX('E', 3, ANALOG)>, /* SDMMC2_CK */ + <STM32_PINMUX('G', 6, ANALOG)>; /* SDMMC2_CMD */ + }; + }; + + sdmmc2_b4_aqm_pins_a: sdmmc2-b4-0 { + pins1 { + pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */ + <STM32_PINMUX('B', 7, AF10)>, /* SDMMC2_D1 */ + <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */ + <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */ + <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */ + <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */ + <STM32_PINMUX('C', 6, AF10)>, /* SDMMC2_D6 */ + <STM32_PINMUX('C', 7, AF10)>, /* SDMMC2_D7 */ + <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + + pins2 { + pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */ + slew-rate = <2>; + drive-push-pull; + bias-pull-up; + }; + }; + + sdmmc2_b4_od_aqm_pins_a: sdmmc2-b4-od-0 { + pins1 { + pinmux = <STM32_PINMUX('B', 14, AF9)>, /* SDMMC2_D0 */ + <STM32_PINMUX('B', 7, AF10)>, /* SDMMC2_D1 */ + <STM32_PINMUX('B', 3, AF9)>, /* SDMMC2_D2 */ + <STM32_PINMUX('B', 4, AF9)>, /* SDMMC2_D3 */ + <STM32_PINMUX('A', 8, AF9)>, /* SDMMC2_D4 */ + <STM32_PINMUX('A', 9, AF10)>, /* SDMMC2_D5 */ + <STM32_PINMUX('C', 6, AF10)>, /* SDMMC2_D6 */ + <STM32_PINMUX('C', 7, AF10)>; /* SDMMC2_D7 */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + + pins2 { + pinmux = <STM32_PINMUX('E', 3, AF9)>; /* SDMMC2_CK */ + slew-rate = <2>; + drive-push-pull; + bias-pull-up; + }; + + pins3 { + pinmux = <STM32_PINMUX('G', 6, AF10)>; /* SDMMC2_CMD */ + slew-rate = <1>; + drive-open-drain; + bias-pull-up; + }; + }; + + sdmmc3_b4_aqm_pins_a: sdmmc3-b4-0 { + pins1 { + pinmux = <STM32_PINMUX('D', 1, AF10)>, /* SDMMC3_D0 */ + <STM32_PINMUX('D', 4, AF10)>, /* SDMMC3_D1 */ + <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */ + <STM32_PINMUX('D', 7, AF10)>, /* SDMMC3_D3 */ + <STM32_PINMUX('D', 0, AF10)>; /* SDMMC3_CMD */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + + pins2 { + pinmux = <STM32_PINMUX('G', 15, AF10)>; /* SDMMC3_CK */ + slew-rate = <2>; + drive-push-pull; + bias-pull-up; + }; + }; + + sdmmc3_b4_od_aqm_pins_a: sdmmc3-b4-od-0 { + pins1 { + pinmux = <STM32_PINMUX('D', 1, AF10)>, /* SDMMC3_D0 */ + <STM32_PINMUX('D', 4, AF10)>, /* SDMMC3_D1 */ + <STM32_PINMUX('D', 5, AF10)>, /* SDMMC3_D2 */ + <STM32_PINMUX('D', 7, AF10)>; /* SDMMC3_D3 */ + slew-rate = <1>; + drive-push-pull; + bias-pull-up; + }; + + pins2 { + pinmux = <STM32_PINMUX('G', 15, AF10)>; /* SDMMC3_CK */ + slew-rate = <2>; + drive-push-pull; + bias-pull-up; + }; + + pins3 { + pinmux = <STM32_PINMUX('D', 0, AF10)>; /* SDMMC3_CMD */ + slew-rate = <1>; + drive-open-drain; + bias-pull-up; + }; + }; + + sdmmc3_b4_sleep_aqm_pins_a: sdmmc3-b4-sleep-0 { + pins { + pinmux = <STM32_PINMUX('D', 1, ANALOG)>, /* SDMMC3_D0 */ + <STM32_PINMUX('D', 4, ANALOG)>, /* SDMMC3_D1 */ + <STM32_PINMUX('D', 5, ANALOG)>, /* SDMMC3_D2 */ + <STM32_PINMUX('D', 7, ANALOG)>, /* SDMMC3_D3 */ + <STM32_PINMUX('G', 15, ANALOG)>, /* SDMMC3_CK */ + <STM32_PINMUX('D', 0, ANALOG)>; /* SDMMC3_CMD */ + }; + }; + + /* spi2 pins redefined because they differ from stm32mp15-pinctrl.dtsi */ + spi2_aqm_pins_a: spi2-0 { + pins1 { + pinmux = <STM32_PINMUX('B', 10, AF5)>, /* SPI2_SCK */ + <STM32_PINMUX('C', 3, AF5)>; /* SPI2_MOSI */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + + pins2 { + pinmux = <STM32_PINMUX('C', 2, AF5)>; /* SPI2_MISO */ + bias-disable; + }; + }; + + uart4_aqm_pins_a: uart4-0 { + pins1 { + pinmux = <STM32_PINMUX('G', 11, AF6)>; /* UART4_TX */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + + pins2 { + pinmux = <STM32_PINMUX('B', 8, AF8)>; /* UART4_RX */ + bias-disable; + }; + }; + + uart4_idle_aqm_pins_a: uart4-idle-0 { + pins1 { + pinmux = <STM32_PINMUX('G', 11, ANALOG)>; /* UART4_TX */ + }; + + pins2 { + pinmux = <STM32_PINMUX('B', 8, AF8)>; /* UART4_RX */ + bias-disable; + }; + }; + + uart4_sleep_aqm_pins_a: uart4-sleep-0 { + pins { + pinmux = <STM32_PINMUX('G', 11, ANALOG)>, /* UART4_TX */ + <STM32_PINMUX('B', 2, ANALOG)>; /* UART4_RX */ + }; + }; + + uart7_aqm_pins_a: uart7-0 { + pins1 { + pinmux = <STM32_PINMUX('F', 7, AF7)>, /* UART7_TX */ + <STM32_PINMUX('F', 8, AF7)>; /* UART7_RTS */ + bias-disable; + drive-push-pull; + slew-rate = <0>; + }; + + pins2 { + pinmux = <STM32_PINMUX('E', 7, AF7)>, /* UART7_RX */ + <STM32_PINMUX('F', 9, AF7)>; /* UART7_CTS */ + bias-disable; + }; + }; +};

[v1,3/3] arm: dts: stm32: Add Plymovent AQM devicetree

Checks

Commit Message

Comments

Patch