@@ -1888,6 +1888,80 @@ static int ppe_queues_to_ring_init(struct ppe_device *ppe_dev)
return ppe_ring_queue_map_set(ppe_dev, 0, queue_bmap);
}
+/* Initialize PPE bridge settings to only enable L2 frame receive and
+ * transmit between CPU port and PPE Ethernet ports.
+ */
+static int ppe_bridge_init(struct ppe_device *ppe_dev)
+{
+ u32 reg, mask, port_cfg[4], vsi_cfg[2];
+ int ret, i;
+
+ /* Configure the following settings for CPU port0:
+ * a.) Enable Bridge TX
+ * b.) Disable FDB new address learning
+ * c.) Disable station move address learning
+ */
+ mask = PPE_PORT_BRIDGE_TXMAC_EN;
+ mask |= PPE_PORT_BRIDGE_NEW_LRN_EN;
+ mask |= PPE_PORT_BRIDGE_STA_MOVE_LRN_EN;
+ ret = regmap_update_bits(ppe_dev->regmap,
+ PPE_PORT_BRIDGE_CTRL_ADDR,
+ mask,
+ PPE_PORT_BRIDGE_TXMAC_EN);
+ if (ret)
+ return ret;
+
+ for (i = 1; i < ppe_dev->num_ports; i++) {
+ /* Enable invalid VSI forwarding for all the physical ports
+ * to CPU port0, in case no VSI is assigned to the physical
+ * port.
+ */
+ reg = PPE_L2_VP_PORT_TBL_ADDR + PPE_L2_VP_PORT_TBL_INC * i;
+ ret = regmap_bulk_read(ppe_dev->regmap, reg,
+ port_cfg, ARRAY_SIZE(port_cfg));
+
+ if (ret)
+ return ret;
+
+ PPE_L2_PORT_SET_INVALID_VSI_FWD_EN(port_cfg, true);
+ PPE_L2_PORT_SET_DST_INFO(port_cfg, 0);
+
+ ret = regmap_bulk_write(ppe_dev->regmap, reg,
+ port_cfg, ARRAY_SIZE(port_cfg));
+ if (ret)
+ return ret;
+ }
+
+ for (i = 0; i < PPE_VSI_TBL_ENTRIES; i++) {
+ /* Set the VSI forward membership to include only CPU port0.
+ * FDB learning and forwarding take place only after switchdev
+ * is supported later to create the VSI and join the physical
+ * ports to the VSI port member.
+ */
+ reg = PPE_VSI_TBL_ADDR + PPE_VSI_TBL_INC * i;
+ ret = regmap_bulk_read(ppe_dev->regmap, reg,
+ vsi_cfg, ARRAY_SIZE(vsi_cfg));
+ if (ret)
+ return ret;
+
+ PPE_VSI_SET_MEMBER_PORT_BITMAP(vsi_cfg, BIT(0));
+ PPE_VSI_SET_UUC_BITMAP(vsi_cfg, BIT(0));
+ PPE_VSI_SET_UMC_BITMAP(vsi_cfg, BIT(0));
+ PPE_VSI_SET_BC_BITMAP(vsi_cfg, BIT(0));
+ PPE_VSI_SET_NEW_ADDR_LRN_EN(vsi_cfg, true);
+ PPE_VSI_SET_NEW_ADDR_FWD_CMD(vsi_cfg, PPE_ACTION_FORWARD);
+ PPE_VSI_SET_STATION_MOVE_LRN_EN(vsi_cfg, true);
+ PPE_VSI_SET_STATION_MOVE_FWD_CMD(vsi_cfg, PPE_ACTION_FORWARD);
+
+ ret = regmap_bulk_write(ppe_dev->regmap, reg,
+ vsi_cfg, ARRAY_SIZE(vsi_cfg));
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
int ppe_hw_config(struct ppe_device *ppe_dev)
{
int ret;
@@ -1920,5 +1994,9 @@ int ppe_hw_config(struct ppe_device *ppe_dev)
if (ret)
return ret;
- return ppe_queues_to_ring_init(ppe_dev);
+ ret = ppe_queues_to_ring_init(ppe_dev);
+ if (ret)
+ return ret;
+
+ return ppe_bridge_init(ppe_dev);
}
@@ -117,6 +117,14 @@
#define PPE_EG_SERVICE_SET_TX_CNT_EN(tbl_cfg, value) \
u32p_replace_bits((u32 *)(tbl_cfg) + 0x1, value, PPE_EG_SERVICE_W1_TX_CNT_EN)
+/* PPE port bridge configuration */
+#define PPE_PORT_BRIDGE_CTRL_ADDR 0x60300
+#define PPE_PORT_BRIDGE_CTRL_ENTRIES 8
+#define PPE_PORT_BRIDGE_CTRL_INC 4
+#define PPE_PORT_BRIDGE_NEW_LRN_EN BIT(0)
+#define PPE_PORT_BRIDGE_STA_MOVE_LRN_EN BIT(3)
+#define PPE_PORT_BRIDGE_TXMAC_EN BIT(16)
+
/* PPE port control configurations for the traffic to the multicast queues. */
#define PPE_MC_MTU_CTRL_TBL_ADDR 0x60a00
#define PPE_MC_MTU_CTRL_TBL_ENTRIES 8
@@ -125,6 +133,36 @@
#define PPE_MC_MTU_CTRL_TBL_MTU_CMD GENMASK(15, 14)
#define PPE_MC_MTU_CTRL_TBL_TX_CNT_EN BIT(16)
+/* PPE VSI configurations */
+#define PPE_VSI_TBL_ADDR 0x63800
+#define PPE_VSI_TBL_ENTRIES 64
+#define PPE_VSI_TBL_INC 0x10
+#define PPE_VSI_W0_MEMBER_PORT_BITMAP GENMASK(7, 0)
+#define PPE_VSI_W0_UUC_BITMAP GENMASK(15, 8)
+#define PPE_VSI_W0_UMC_BITMAP GENMASK(23, 16)
+#define PPE_VSI_W0_BC_BITMAP GENMASK(31, 24)
+#define PPE_VSI_W1_NEW_ADDR_LRN_EN BIT(0)
+#define PPE_VSI_W1_NEW_ADDR_FWD_CMD GENMASK(2, 1)
+#define PPE_VSI_W1_STATION_MOVE_LRN_EN BIT(3)
+#define PPE_VSI_W1_STATION_MOVE_FWD_CMD GENMASK(5, 4)
+
+#define PPE_VSI_SET_MEMBER_PORT_BITMAP(tbl_cfg, value) \
+ u32p_replace_bits((u32 *)tbl_cfg, value, PPE_VSI_W0_MEMBER_PORT_BITMAP)
+#define PPE_VSI_SET_UUC_BITMAP(tbl_cfg, value) \
+ u32p_replace_bits((u32 *)tbl_cfg, value, PPE_VSI_W0_UUC_BITMAP)
+#define PPE_VSI_SET_UMC_BITMAP(tbl_cfg, value) \
+ u32p_replace_bits((u32 *)tbl_cfg, value, PPE_VSI_W0_UMC_BITMAP)
+#define PPE_VSI_SET_BC_BITMAP(tbl_cfg, value) \
+ u32p_replace_bits((u32 *)tbl_cfg, value, PPE_VSI_W0_BC_BITMAP)
+#define PPE_VSI_SET_NEW_ADDR_LRN_EN(tbl_cfg, value) \
+ u32p_replace_bits((u32 *)(tbl_cfg) + 0x1, value, PPE_VSI_W1_NEW_ADDR_LRN_EN)
+#define PPE_VSI_SET_NEW_ADDR_FWD_CMD(tbl_cfg, value) \
+ u32p_replace_bits((u32 *)(tbl_cfg) + 0x1, value, PPE_VSI_W1_NEW_ADDR_FWD_CMD)
+#define PPE_VSI_SET_STATION_MOVE_LRN_EN(tbl_cfg, value) \
+ u32p_replace_bits((u32 *)(tbl_cfg) + 0x1, value, PPE_VSI_W1_STATION_MOVE_LRN_EN)
+#define PPE_VSI_SET_STATION_MOVE_FWD_CMD(tbl_cfg, value) \
+ u32p_replace_bits((u32 *)(tbl_cfg) + 0x1, value, PPE_VSI_W1_STATION_MOVE_FWD_CMD)
+
/* PPE port control configurations for the traffic to the unicast queues. */
#define PPE_MRU_MTU_CTRL_TBL_ADDR 0x65000
#define PPE_MRU_MTU_CTRL_TBL_ENTRIES 256
@@ -163,6 +201,18 @@
#define PPE_IN_L2_SERVICE_TBL_RX_CNT_EN BIT(30)
#define PPE_IN_L2_SERVICE_TBL_TX_CNT_EN BIT(31)
+/* L2 Port configurations */
+#define PPE_L2_VP_PORT_TBL_ADDR 0x98000
+#define PPE_L2_VP_PORT_TBL_ENTRIES 256
+#define PPE_L2_VP_PORT_TBL_INC 0x10
+#define PPE_L2_VP_PORT_W0_INVALID_VSI_FWD_EN BIT(0)
+#define PPE_L2_VP_PORT_W0_DST_INFO GENMASK(9, 2)
+
+#define PPE_L2_PORT_SET_INVALID_VSI_FWD_EN(tbl_cfg, value) \
+ u32p_replace_bits((u32 *)tbl_cfg, value, PPE_L2_VP_PORT_W0_INVALID_VSI_FWD_EN)
+#define PPE_L2_PORT_SET_DST_INFO(tbl_cfg, value) \
+ u32p_replace_bits((u32 *)tbl_cfg, value, PPE_L2_VP_PORT_W0_DST_INFO)
+
/* PPE service code configuration for the tunnel packet. */
#define PPE_TL_SERVICE_TBL_ADDR 0x306000
#define PPE_TL_SERVICE_TBL_ENTRIES 256