diff mbox series

[net-next,v7,5/8] tsnep: Select speed for loopback

Message ID 20250219194213.10448-6-gerhard@engleder-embedded.com (mailing list archive)
State Changes Requested
Delegated to: Netdev Maintainers
Headers show
Series Support loopback mode speed selection | expand

Checks

Context Check Description
netdev/series_format success Posting correctly formatted
netdev/tree_selection success Clearly marked for net-next
netdev/ynl success Generated files up to date; no warnings/errors; no diff in generated;
netdev/fixes_present success Fixes tag not required for -next series
netdev/header_inline success No static functions without inline keyword in header files
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/build_tools success No tools touched, skip
netdev/cc_maintainers warning 2 maintainers not CCed: andrew+netdev@lunn.ch aleksander.lobakin@intel.com
netdev/build_clang success Errors and warnings before: 0 this patch: 0
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/deprecated_api success None detected
netdev/check_selftest success No net selftest shell script
netdev/verify_fixes success No Fixes tag
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 30 lines checked
netdev/build_clang_rust success No Rust files in patch. Skipping build
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/source_inline success Was 0 now: 0

Commit Message

Gerhard Engleder Feb. 19, 2025, 7:42 p.m. UTC 
Use 100 Mbps only if the PHY is configured to this speed. Otherwise use
always the maximum speed of 1000 Mbps.

Also remove explicit setting of carrier on and link mode after loopback.
This is not needed anymore, because phy_loopback() with selected speed
signals the link and the speed to the MAC.

Signed-off-by: Gerhard Engleder <gerhard@engleder-embedded.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
---
 drivers/net/ethernet/engleder/tsnep_main.c | 21 ++++++++++-----------
 1 file changed, 10 insertions(+), 11 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/engleder/tsnep_main.c b/drivers/net/ethernet/engleder/tsnep_main.c
index a16b12137edb..d77a5b423c4c 100644
--- a/drivers/net/ethernet/engleder/tsnep_main.c
+++ b/drivers/net/ethernet/engleder/tsnep_main.c
@@ -228,20 +228,19 @@  static void tsnep_phy_link_status_change(struct net_device *netdev)
 
 static int tsnep_phy_loopback(struct tsnep_adapter *adapter, bool enable)
 {
-	int retval;
-
-	retval = phy_loopback(adapter->phydev, enable, 0);
+	int speed;
 
-	/* PHY link state change is not signaled if loopback is enabled, it
-	 * would delay a working loopback anyway, let's ensure that loopback
-	 * is working immediately by setting link mode directly
-	 */
-	if (!retval && enable) {
-		netif_carrier_on(adapter->netdev);
-		tsnep_set_link_mode(adapter);
+	if (enable) {
+		if (adapter->phydev->autoneg == AUTONEG_DISABLE &&
+		    adapter->phydev->speed == SPEED_100)
+			speed = SPEED_100;
+		else
+			speed = SPEED_1000;
+	} else {
+		speed = 0;
 	}
 
-	return retval;
+	return phy_loopback(adapter->phydev, enable, speed);
 }
 
 static int tsnep_phy_open(struct tsnep_adapter *adapter)