@@ -297,9 +297,11 @@ static int enetc_map_tx_buffs(struct enetc_bdr *tx_ring, struct sk_buff *skb)
}
if (do_onestep_tstamp) {
- u32 lo, hi, val;
- u64 sec, nsec;
+ __be32 new_sec_l, new_nsec;
+ u32 lo, hi, nsec, val;
+ __be16 new_sec_h;
u8 *data;
+ u64 sec;
lo = enetc_rd_hot(hw, ENETC_SICTR0);
hi = enetc_rd_hot(hw, ENETC_SICTR1);
@@ -313,13 +315,38 @@ static int enetc_map_tx_buffs(struct enetc_bdr *tx_ring, struct sk_buff *skb)
/* Update originTimestamp field of Sync packet
* - 48 bits seconds field
* - 32 bits nanseconds field
+ *
+ * In addition, the UDP checksum needs to be updated
+ * by software after updating originTimestamp field,
+ * otherwise the hardware will calculate the wrong
+ * checksum when updating the correction field and
+ * update it to the packet.
*/
data = skb_mac_header(skb);
- *(__be16 *)(data + offset2) =
- htons((sec >> 32) & 0xffff);
- *(__be32 *)(data + offset2 + 2) =
- htonl(sec & 0xffffffff);
- *(__be32 *)(data + offset2 + 6) = htonl(nsec);
+ new_sec_h = htons((sec >> 32) & 0xffff);
+ new_sec_l = htonl(sec & 0xffffffff);
+ new_nsec = htonl(nsec);
+ if (udp) {
+ struct udphdr *uh = udp_hdr(skb);
+ __be32 old_sec_l, old_nsec;
+ __be16 old_sec_h;
+
+ old_sec_h = *(__be16 *)(data + offset2);
+ inet_proto_csum_replace2(&uh->check, skb, old_sec_h,
+ new_sec_h, false);
+
+ old_sec_l = *(__be32 *)(data + offset2 + 2);
+ inet_proto_csum_replace4(&uh->check, skb, old_sec_l,
+ new_sec_l, false);
+
+ old_nsec = *(__be32 *)(data + offset2 + 6);
+ inet_proto_csum_replace4(&uh->check, skb, old_nsec,
+ new_nsec, false);
+ }
+
+ *(__be16 *)(data + offset2) = new_sec_h;
+ *(__be32 *)(data + offset2 + 2) = new_sec_l;
+ *(__be32 *)(data + offset2 + 6) = new_nsec;
/* Configure single-step register */
val = ENETC_PM0_SINGLE_STEP_EN;
There is an issue with one-step timestamp based on UDP/IP. The peer will discard the sync packet because of the wrong UDP checksum. For ENETC v1, the software needs to update the UDP checksum when updating the originTimestamp field, so that the hardware can correctly update the UDP checksum when updating the correction field. Otherwise, the UDP checksum in the sync packet will be wrong. Fixes: 7294380c5211 ("enetc: support PTP Sync packet one-step timestamping") Cc: stable@vger.kernel.org Signed-off-by: Wei Fang <wei.fang@nxp.com> Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com> Tested-by: Vladimir Oltean <vladimir.oltean@nxp.com> --- drivers/net/ethernet/freescale/enetc/enetc.c | 41 ++++++++++++++++---- 1 file changed, 34 insertions(+), 7 deletions(-)