| Message ID | 20250225181455.224309-1-jdamato@fastly.com (mailing list archive) |
|---|---|
| State | New |
| Delegated to: | Netdev Maintainers |
| Headers | show |
| Series | [net] selftests: drv-net: Check if combined-count exists | expand |
On 25.02.25 19:14, Joe Damato wrote: > Some drivers, like tg3, do not set combined-count: > > $ ethtool -l enp4s0f1 > Channel parameters for enp4s0f1: > Pre-set maximums: > RX: 4 > TX: 4 > Other: n/a > Combined: n/a > Current hardware settings: > RX: 4 > TX: 1 > Other: n/a > Combined: n/a > > In the case where combined-count is not set, the ethtool netlink code > in the kernel elides the value and the code in the test: > > netnl.channels_get(...) > > With a tg3 device, the returned dictionary looks like: > > {'header': {'dev-index': 3, 'dev-name': 'enp4s0f1'}, > 'rx-max': 4, > 'rx-count': 4, > 'tx-max': 4, > 'tx-count': 1} > > Note that the key 'combined-count' is missing. As a result of this > missing key the test raises an exception: > > # Exception| if channels['combined-count'] == 0: > # Exception| ~~~~~~~~^^^^^^^^^^^^^^^^^^ > # Exception| KeyError: 'combined-count' > > Change the test to check if 'combined-count' is a key in the dictionary > first and if not assume that this means the driver has separate RX and > TX queues. > > With this change, the test now passes successfully on tg3 and mlx5 > (which does have a 'combined-count'). > > Fixes: 1cf270424218 ("net: selftest: add test for netdev netlink queue-get API") > Signed-off-by: Joe Damato <jdamato@fastly.com> > --- > tools/testing/selftests/drivers/net/queues.py | 9 ++++++--- > 1 file changed, 6 insertions(+), 3 deletions(-) > > diff --git a/tools/testing/selftests/drivers/net/queues.py b/tools/testing/selftests/drivers/net/queues.py > index 38303da957ee..baa8845d9f64 100755 > --- a/tools/testing/selftests/drivers/net/queues.py > +++ b/tools/testing/selftests/drivers/net/queues.py > @@ -45,10 +45,13 @@ def addremove_queues(cfg, nl) -> None: > > netnl = EthtoolFamily() > channels = netnl.channels_get({'header': {'dev-index': cfg.ifindex}}) > - if channels['combined-count'] == 0: > - rx_type = 'rx' > + if 'combined-count' in channels: > + if channels['combined-count'] == 0: > + rx_type = 'rx' > + else: > + rx_type = 'combined' > else: > - rx_type = 'combined' > + rx_type = 'rx' > > expected = curr_queues - 1 > cmd(f"ethtool -L {cfg.dev['ifname']} {rx_type} {expected}", timeout=10) > > base-commit: bc50682128bde778a1ddc457a02d92a637c20c6f Reviewed-by: Gerhard Engleder <gerhard@engleder-embedded.com>
diff --git a/tools/testing/selftests/drivers/net/queues.py b/tools/testing/selftests/drivers/net/queues.py index 38303da957ee..baa8845d9f64 100755 --- a/tools/testing/selftests/drivers/net/queues.py +++ b/tools/testing/selftests/drivers/net/queues.py @@ -45,10 +45,13 @@ def addremove_queues(cfg, nl) -> None: netnl = EthtoolFamily() channels = netnl.channels_get({'header': {'dev-index': cfg.ifindex}}) - if channels['combined-count'] == 0: - rx_type = 'rx' + if 'combined-count' in channels: + if channels['combined-count'] == 0: + rx_type = 'rx' + else: + rx_type = 'combined' else: - rx_type = 'combined' + rx_type = 'rx' expected = curr_queues - 1 cmd(f"ethtool -L {cfg.dev['ifname']} {rx_type} {expected}", timeout=10)
Some drivers, like tg3, do not set combined-count: $ ethtool -l enp4s0f1 Channel parameters for enp4s0f1: Pre-set maximums: RX: 4 TX: 4 Other: n/a Combined: n/a Current hardware settings: RX: 4 TX: 1 Other: n/a Combined: n/a In the case where combined-count is not set, the ethtool netlink code in the kernel elides the value and the code in the test: netnl.channels_get(...) With a tg3 device, the returned dictionary looks like: {'header': {'dev-index': 3, 'dev-name': 'enp4s0f1'}, 'rx-max': 4, 'rx-count': 4, 'tx-max': 4, 'tx-count': 1} Note that the key 'combined-count' is missing. As a result of this missing key the test raises an exception: # Exception| if channels['combined-count'] == 0: # Exception| ~~~~~~~~^^^^^^^^^^^^^^^^^^ # Exception| KeyError: 'combined-count' Change the test to check if 'combined-count' is a key in the dictionary first and if not assume that this means the driver has separate RX and TX queues. With this change, the test now passes successfully on tg3 and mlx5 (which does have a 'combined-count'). Fixes: 1cf270424218 ("net: selftest: add test for netdev netlink queue-get API") Signed-off-by: Joe Damato <jdamato@fastly.com> --- tools/testing/selftests/drivers/net/queues.py | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) base-commit: bc50682128bde778a1ddc457a02d92a637c20c6f