new file mode 100644
@@ -0,0 +1,122 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/aeonsemi,as21xxx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Aeonsemi AS21XXX Ethernet PHY
+
+maintainers:
+ - Christian Marangi <ansuelsmth@gmail.com>
+
+description: |
+ Aeonsemi AS21xxx Ethernet PHYs requires a firmware to be loaded to actually
+ work. The same firmware is compatible with various PHYs of the same family.
+
+ A PHY with not firmware loaded will be exposed on the MDIO bus with ID
+ 0x7500 0x7500 or 0x7500 0x9410 on C45 registers.
+
+ This can be done and is implemented by OEM in 2 different way:
+ - Attached SPI flash directly to the PHY with the firmware. The PHY
+ will self load the firmware in the presence of this configuration.
+ - Manually provided firmware loaded from a file in the filesystem.
+
+ Each PHY can support up to 5 LEDs.
+
+ AS2xxx PHY Name logic:
+
+ AS21x1xxB1
+ ^ ^^
+ | |J: Supports SyncE/PTP
+ | |P: No SyncE/PTP support
+ | 1: Supports 2nd Serdes
+ | 2: Not 2nd Serdes support
+ 0: 10G, 5G, 2.5G
+ 5: 5G, 2.5G
+ 2: 2.5G
+
+allOf:
+ - $ref: ethernet-phy.yaml#
+
+select:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - ethernet-phy-id7500.9410
+ - ethernet-phy-id7500.9402
+ - ethernet-phy-id7500.9412
+ - ethernet-phy-id7500.9422
+ - ethernet-phy-id7500.9432
+ - ethernet-phy-id7500.9442
+ - ethernet-phy-id7500.9452
+ - ethernet-phy-id7500.9462
+ - ethernet-phy-id7500.9472
+ - ethernet-phy-id7500.9482
+ - ethernet-phy-id7500.9492
+ required:
+ - compatible
+
+properties:
+ reg:
+ maxItems: 1
+
+ firmware-name:
+ description: specify the name of PHY firmware to load
+ maxItems: 1
+
+required:
+ - compatible
+ - reg
+
+if:
+ properties:
+ compatible:
+ contains:
+ const: ethernet-phy-id7500.9410
+then:
+ required:
+ - firmware-name
+else:
+ properties:
+ firmware-name: false
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/leds/common.h>
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ ethernet-phy@1f {
+ compatible = "ethernet-phy-id7500.9410",
+ "ethernet-phy-ieee802.3-c45";
+
+ reg = <31>;
+ firmware-name = "as21x1x_fw.bin";
+
+ leds {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ led@0 {
+ reg = <0>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_LAN;
+ function-enumerator = <0>;
+ default-state = "keep";
+ };
+
+ led@1 {
+ reg = <1>;
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_LAN;
+ function-enumerator = <1>;
+ default-state = "keep";
+ };
+ };
+ };
+ };
@@ -650,6 +650,7 @@ AEONSEMI PHY DRIVER
M: Christian Marangi <ansuelsmth@gmail.com>
L: netdev@vger.kernel.org
S: Maintained
+F: Documentation/devicetree/bindings/net/aeonsemi,as21xxx.yaml
F: drivers/net/phy/as21xxx.c
AF8133J THREE-AXIS MAGNETOMETER DRIVER