[v12,2/5] rust: time: Introduce Delta type

Commit Message

FUJITA Tomonori April 6, 2025, 1:34 a.m. UTC

Introduce a type representing a span of time. Define our own type
because `core::time::Duration` is large and could panic during
creation.

time::Ktime could be also used for time duration but timestamp and
timedelta are different so better to use a new type.

i64 is used instead of u64 to represent a span of time; some C drivers
uses negative Deltas and i64 is more compatible with Ktime using i64
too (e.g., ktime_[us|ms]_delta() APIs return i64 so we create Delta
object without type conversion.

i64 is used instead of bindings::ktime_t because when the ktime_t
type is used as timestamp, it represents values from 0 to
KTIME_MAX, which is different from Delta.

as_millis() method isn't used in this patchset. It's planned to be
used in Binder driver.

Reviewed-by: Andrew Lunn <[e-mail]>
Reviewed-by: Alice Ryhl <[e-mail]>
Reviewed-by: Gary Guo <[e-mail]>
Reviewed-by: Fiona Behrens <[e-mail]>
Tested-by: Daniel Almeida <[e-mail]>
Reviewed-by: Andreas Hindborg <[e-mail]>
Signed-off-by: FUJITA Tomonori <[e-mail]>
---
 rust/kernel/time.rs | 88 +++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 88 insertions(+)

Patch

diff --git a/rust/kernel/time.rs b/rust/kernel/time.rs
index 9d57e8a5552a..e00b9a853e6a 100644
--- a/rust/kernel/time.rs
+++ b/rust/kernel/time.rs
@@ -10,9 +10,15 @@ 
 
 pub mod hrtimer;
 
+/// The number of nanoseconds per microsecond.
+pub const NSEC_PER_USEC: i64 = bindings::NSEC_PER_USEC as i64;
+
 /// The number of nanoseconds per millisecond.
 pub const NSEC_PER_MSEC: i64 = bindings::NSEC_PER_MSEC as i64;
 
+/// The number of nanoseconds per second.
+pub const NSEC_PER_SEC: i64 = bindings::NSEC_PER_SEC as i64;
+
 /// The time unit of Linux kernel. One jiffy equals (1/HZ) second.
 pub type Jiffies = crate::ffi::c_ulong;
 
@@ -149,3 +155,85 @@  fn into_c(self) -> bindings::clockid_t {
         self as bindings::clockid_t
     }
 }
+
+/// A span of time.
+///
+/// This struct represents a span of time, with its value stored as nanoseconds.
+/// The value can represent any valid i64 value, including negative, zero, and
+/// positive numbers.
+#[derive(Copy, Clone, PartialEq, PartialOrd, Eq, Ord, Debug)]
+pub struct Delta {
+    nanos: i64,
+}
+
+impl Delta {
+    /// A span of time equal to zero.
+    pub const ZERO: Self = Self { nanos: 0 };
+
+    /// Create a new [`Delta`] from a number of microseconds.
+    ///
+    /// The `micros` can range from -9_223_372_036_854_775 to 9_223_372_036_854_775.
+    /// If `micros` is outside this range, `i64::MIN` is used for negative values,
+    /// and `i64::MAX` is used for positive values due to saturation.
+    #[inline]
+    pub const fn from_micros(micros: i64) -> Self {
+        Self {
+            nanos: micros.saturating_mul(NSEC_PER_USEC),
+        }
+    }
+
+    /// Create a new [`Delta`] from a number of milliseconds.
+    ///
+    /// The `millis` can range from -9_223_372_036_854 to 9_223_372_036_854.
+    /// If `millis` is outside this range, `i64::MIN` is used for negative values,
+    /// and `i64::MAX` is used for positive values due to saturation.
+    #[inline]
+    pub const fn from_millis(millis: i64) -> Self {
+        Self {
+            nanos: millis.saturating_mul(NSEC_PER_MSEC),
+        }
+    }
+
+    /// Create a new [`Delta`] from a number of seconds.
+    ///
+    /// The `secs` can range from -9_223_372_036 to 9_223_372_036.
+    /// If `secs` is outside this range, `i64::MIN` is used for negative values,
+    /// and `i64::MAX` is used for positive values due to saturation.
+    #[inline]
+    pub const fn from_secs(secs: i64) -> Self {
+        Self {
+            nanos: secs.saturating_mul(NSEC_PER_SEC),
+        }
+    }
+
+    /// Return `true` if the [`Delta`] spans no time.
+    #[inline]
+    pub fn is_zero(self) -> bool {
+        self.as_nanos() == 0
+    }
+
+    /// Return `true` if the [`Delta`] spans a negative amount of time.
+    #[inline]
+    pub fn is_negative(self) -> bool {
+        self.as_nanos() < 0
+    }
+
+    /// Return the number of nanoseconds in the [`Delta`].
+    #[inline]
+    pub const fn as_nanos(self) -> i64 {
+        self.nanos
+    }
+
+    /// Return the smallest number of microseconds greater than or equal
+    /// to the value in the [`Delta`].
+    #[inline]
+    pub const fn as_micros_ceil(self) -> i64 {
+        self.as_nanos().saturating_add(NSEC_PER_USEC - 1) / NSEC_PER_USEC
+    }
+
+    /// Return the number of milliseconds in the [`Delta`].
+    #[inline]
+    pub const fn as_millis(self) -> i64 {
+        self.as_nanos() / NSEC_PER_MSEC
+    }
+}