diff mbox series

[net-next,v9,5/6] net: stmmac: dwmac-loongson: Add full PCI support

Message ID 26d22ccabf7b72c01c1e32203dde313179fc57a7.1712407009.git.siyanteng@loongson.cn (mailing list archive)
State Superseded
Delegated to: Netdev Maintainers
Headers show
Series stmmac: Add Loongson platform support | expand

Checks

Context Check Description
netdev/series_format success Posting correctly formatted
netdev/tree_selection success Clearly marked for net-next
netdev/ynl success Generated files up to date; no warnings/errors; no diff in generated;
netdev/fixes_present success Fixes tag not required for -next series
netdev/header_inline success No static functions without inline keyword in header files
netdev/build_32bit fail Errors and warnings before: 21 this patch: 18
netdev/build_tools success No tools touched, skip
netdev/cc_maintainers warning 6 maintainers not CCed: mcoquelin.stm32@gmail.com kuba@kernel.org linux-stm32@st-md-mailman.stormreply.com edumazet@google.com linux-arm-kernel@lists.infradead.org pabeni@redhat.com
netdev/build_clang fail Errors and warnings before: 24 this patch: 22
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/deprecated_api success None detected
netdev/check_selftest success No net selftest shell script
netdev/verify_fixes success No Fixes tag
netdev/build_allmodconfig_warn fail Errors and warnings before: 21 this patch: 18
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 150 lines checked
netdev/build_clang_rust success No Rust files in patch. Skipping build
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/source_inline success Was 0 now: 0

Commit Message

Yanteng Si April 6, 2024, 1:24 p.m. UTC 
Current dwmac-loongson only support LS2K in the "probed with PCI and
configured with DT" manner. Add LS7A support on which the devices are
fully PCI (non-DT).

Others:
LS2K is a SoC and LS7A is a bridge chip. In the current driving state,
they are both gmac and phy_interface is RGMII.

Signed-off-by: Yanteng Si <siyanteng@loongson.cn>
Signed-off-by: Feiyang Chen <chenfeiyang@loongson.cn>
Signed-off-by: Yinggang Gu <guyinggang@loongson.cn>
---
 .../ethernet/stmicro/stmmac/dwmac-loongson.c  | 103 +++++++++++-------
 1 file changed, 64 insertions(+), 39 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
index 20ddbf0dc6ab..84ead5edd6d0 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
@@ -9,9 +9,19 @@ 
 #include <linux/of_irq.h>
 #include "stmmac.h"
 
+#define PCI_DEVICE_ID_LOONGSON_GMAC	0x7a03
+
+struct stmmac_pci_info {
+	int (*setup)(struct pci_dev *pdev, struct plat_stmmacenet_data *plat);
+};
+
 static void loongson_default_data(struct pci_dev *pdev,
 				  struct plat_stmmacenet_data *plat)
 {
+	/* Get bus_id, this can be overloaded later */
+	plat->bus_id = (pci_domain_nr(pdev->bus) << 16) |
+		       PCI_DEVID(pdev->bus->number, pdev->devfn);
+
 	plat->clk_csr = 2;	/* clk_csr_i = 20-35MHz & MDC = clk_csr_i/16 */
 	plat->has_gmac = 1;
 	plat->force_sf_dma_mode = 1;
@@ -40,6 +50,7 @@  static int loongson_gmac_data(struct pci_dev *pdev,
 
 	/* Default to phy auto-detection */
 	plat->phy_addr = -1;
+	plat->phy_interface = PHY_INTERFACE_MODE_RGMII_ID;
 
 	plat->dma_cfg->pbl = 32;
 	plat->dma_cfg->pblx8 = true;
@@ -54,19 +65,17 @@  static int loongson_gmac_data(struct pci_dev *pdev,
 	return 0;
 }
 
+static struct stmmac_pci_info loongson_gmac_pci_info = {
+	.setup = loongson_gmac_data,
+};
+
 static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	struct plat_stmmacenet_data *plat;
+	int ret, i, bus_id, phy_mode;
+	struct stmmac_pci_info *info;
 	struct stmmac_resources res;
 	struct device_node *np;
-	int ret, i, phy_mode;
-
-	np = dev_of_node(&pdev->dev);
-
-	if (!np) {
-		pr_info("dwmac_loongson_pci: No OF node\n");
-		return -ENODEV;
-	}
 
 	plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL);
 	if (!plat)
@@ -78,12 +87,6 @@  static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id
 	if (!plat->mdio_bus_data)
 		return -ENOMEM;
 
-	plat->mdio_node = of_get_child_by_name(np, "mdio");
-	if (plat->mdio_node) {
-		dev_info(&pdev->dev, "Found MDIO subnode\n");
-		plat->mdio_bus_data->needs_reset = true;
-	}
-
 	plat->dma_cfg = devm_kzalloc(&pdev->dev, sizeof(*plat->dma_cfg), GFP_KERNEL);
 	if (!plat->dma_cfg) {
 		ret = -ENOMEM;
@@ -107,10 +110,6 @@  static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id
 		break;
 	}
 
-	plat->bus_id = of_alias_get_id(np, "ethernet");
-	if (plat->bus_id < 0)
-		plat->bus_id = pci_dev_id(pdev);
-
 	phy_mode = device_get_phy_mode(&pdev->dev);
 	if (phy_mode < 0) {
 		dev_err(&pdev->dev, "phy_mode not found\n");
@@ -122,30 +121,56 @@  static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id
 
 	pci_set_master(pdev);
 
-	loongson_gmac_data(pdev, plat);
-	pci_enable_msi(pdev);
-	memset(&res, 0, sizeof(res));
-	res.addr = pcim_iomap_table(pdev)[0];
-
-	res.irq = of_irq_get_byname(np, "macirq");
-	if (res.irq < 0) {
-		dev_err(&pdev->dev, "IRQ macirq not found\n");
-		ret = -ENODEV;
-		goto err_disable_msi;
-	}
+	info = (struct stmmac_pci_info *)id->driver_data;
+	ret = info->setup(pdev, plat);
+	if (ret)
+		goto err_disable_device;
 
-	res.wol_irq = of_irq_get_byname(np, "eth_wake_irq");
-	if (res.wol_irq < 0) {
-		dev_info(&pdev->dev, "IRQ eth_wake_irq not found, using macirq\n");
-		res.wol_irq = res.irq;
+	if (np) {
+		plat->mdio_node = of_get_child_by_name(np, "mdio");
+		if (plat->mdio_node) {
+			dev_info(&pdev->dev, "Found MDIO subnode\n");
+			plat->mdio_bus_data->needs_reset = true;
+		}
+
+		bus_id = of_alias_get_id(np, "ethernet");
+		if (bus_id >= 0)
+			plat->bus_id = bus_id;
+
+		phy_mode = device_get_phy_mode(&pdev->dev);
+		if (phy_mode < 0) {
+			dev_err(&pdev->dev, "phy_mode not found\n");
+			ret = phy_mode;
+			goto err_disable_device;
+		}
+		plat->phy_interface = phy_mode;
+
+		res.irq = of_irq_get_byname(np, "macirq");
+		if (res.irq < 0) {
+			dev_err(&pdev->dev, "IRQ macirq not found\n");
+			ret = -ENODEV;
+			goto err_disable_msi;
+		}
+
+		res.wol_irq = of_irq_get_byname(np, "eth_wake_irq");
+		if (res.wol_irq < 0) {
+			dev_info(&pdev->dev, "IRQ eth_wake_irq not found, using macirq\n");
+			res.wol_irq = res.irq;
+		}
+
+		res.lpi_irq = of_irq_get_byname(np, "eth_lpi");
+		if (res.lpi_irq < 0) {
+			dev_err(&pdev->dev, "IRQ eth_lpi not found\n");
+			ret = -ENODEV;
+			goto err_disable_msi;
+		}
+	} else {
+		res.irq = pdev->irq;
 	}
 
-	res.lpi_irq = of_irq_get_byname(np, "eth_lpi");
-	if (res.lpi_irq < 0) {
-		dev_err(&pdev->dev, "IRQ eth_lpi not found\n");
-		ret = -ENODEV;
-		goto err_disable_msi;
-	}
+	pci_enable_msi(pdev);
+	memset(&res, 0, sizeof(res));
+	res.addr = pcim_iomap_table(pdev)[0];
 
 	ret = stmmac_dvr_probe(&pdev->dev, plat, &res);
 	if (ret)