@@ -680,15 +680,19 @@ static int rtl822x_config_aneg(struct phy_device *phydev)
int ret = 0;
if (phydev->autoneg == AUTONEG_ENABLE) {
- u16 adv2500 = 0;
+ u16 adv = 0;
if (linkmode_test_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT,
phydev->advertising))
- adv2500 = MDIO_AN_10GBT_CTRL_ADV2_5G;
+ adv |= MDIO_AN_10GBT_CTRL_ADV2_5G;
+ if (linkmode_test_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT,
+ phydev->advertising))
+ adv |= MDIO_AN_10GBT_CTRL_ADV5G;
ret = phy_modify_paged_changed(phydev, 0xa5d, 0x12,
- MDIO_AN_10GBT_CTRL_ADV2_5G,
- adv2500);
+ MDIO_AN_10GBT_CTRL_ADV2_5G |
+ MDIO_AN_10GBT_CTRL_ADV5G,
+ adv);
if (ret < 0)
return ret;
}
RTL8126 as an evolution of RTL8125 supports 5Gbps. rtl822x_config_aneg() is used by the PHY driver for the integrated PHY, therefore add 5Gbps support to it. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> --- drivers/net/phy/realtek.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-)