@@ -686,7 +686,7 @@ static int genphy_c45_write_eee_adv(struct phy_device *phydev,
__ETHTOOL_DECLARE_LINK_MODE_MASK(tmp);
int val, changed = 0;
- linkmode_andnot(tmp, adv, phydev->eee_broken_modes);
+ linkmode_andnot(tmp, adv, phydev->eee_disabled_modes);
if (linkmode_intersects(phydev->supported_eee, PHY_EEE_CAP1_FEATURES)) {
val = linkmode_to_mii_eee_cap1_t(tmp);
@@ -388,7 +388,7 @@ void of_set_phy_supported(struct phy_device *phydev)
void of_set_phy_eee_broken(struct phy_device *phydev)
{
struct device_node *node = phydev->mdio.dev.of_node;
- unsigned long *modes = phydev->eee_broken_modes;
+ unsigned long *modes = phydev->eee_disabled_modes;
if (!IS_ENABLED(CONFIG_OF_MDIO) || !node)
return;
@@ -3016,7 +3016,7 @@ void phy_disable_eee(struct phy_device *phydev)
phydev->eee_cfg.tx_lpi_enabled = false;
phydev->eee_cfg.eee_enabled = false;
/* don't let userspace re-enable EEE advertisement */
- linkmode_fill(phydev->eee_broken_modes);
+ linkmode_fill(phydev->eee_disabled_modes);
}
EXPORT_SYMBOL_GPL(phy_disable_eee);
@@ -629,7 +629,7 @@ struct macsec_ops;
* @eee_cfg: User configuration of EEE
* @lp_advertising: Current link partner advertised linkmodes
* @host_interfaces: PHY interface modes supported by host
- * @eee_broken_modes: Energy efficient ethernet modes which should be prohibited
+ * @eee_disabled_modes: Energy efficient ethernet modes not to be advertised
* @autoneg: Flag autoneg being used
* @rate_matching: Current rate matching mode
* @link: Current link state
@@ -745,7 +745,7 @@ struct phy_device {
__ETHTOOL_DECLARE_LINK_MODE_MASK(supported_eee);
__ETHTOOL_DECLARE_LINK_MODE_MASK(advertising_eee);
/* Energy efficient ethernet modes which should be prohibited */
- __ETHTOOL_DECLARE_LINK_MODE_MASK(eee_broken_modes);
+ __ETHTOOL_DECLARE_LINK_MODE_MASK(eee_disabled_modes);
bool enable_tx_lpi;
bool eee_active;
struct eee_config eee_cfg;
@@ -1324,7 +1324,7 @@ int phy_speed_down_core(struct phy_device *phydev);
*/
static inline void phy_set_eee_broken(struct phy_device *phydev, u32 link_mode)
{
- linkmode_set_bit(link_mode, phydev->eee_broken_modes);
+ linkmode_set_bit(link_mode, phydev->eee_disabled_modes);
}
/**
This bitmap is used also if the MAC doesn't support an EEE mode. So the mode isn't necessarily broken in the PHY. Therefore rename the bitmap. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> --- drivers/net/phy/phy-c45.c | 2 +- drivers/net/phy/phy-core.c | 2 +- drivers/net/phy/phy_device.c | 2 +- include/linux/phy.h | 6 +++--- 4 files changed, 6 insertions(+), 6 deletions(-)