diff mbox series

[net,2/2] netfilter: rpfilter: mask ecn bits before fib lookup

Message ID 68bdd9383165b264dda2157cd4793d2b723d6438.1610790904.git.gnault@redhat.com (mailing list archive)
State Accepted
Commit 2e5a6266fbb11ae93c468dfecab169aca9c27b43
Delegated to: Netdev Maintainers
Headers show
Series ipv4: Ensure ECN bits don't influence source address validation | expand

Checks

Context Check Description
netdev/cover_letter success Link
netdev/fixes_present success Link
netdev/patch_count success Link
netdev/tree_selection success Clearly marked for net
netdev/subject_prefix success Link
netdev/cc_maintainers warning 3 maintainers not CCed: coreteam@netfilter.org netfilter-devel@vger.kernel.org yoshfuji@linux-ipv6.org
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success Link
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 8 lines checked
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/header_inline success Link
netdev/stable success Stable not CCed

Commit Message

Guillaume Nault Jan. 16, 2021, 10:44 a.m. UTC
RT_TOS() only masks one of the two ECN bits. Therefore rpfilter_mt()
treats Not-ECT or ECT(1) packets in a different way than those with
ECT(0) or CE.

Reproducer:

  Create two netns, connected with a veth:
  $ ip netns add ns0
  $ ip netns add ns1
  $ ip link add name veth01 netns ns0 type veth peer name veth10 netns ns1
  $ ip -netns ns0 link set dev veth01 up
  $ ip -netns ns1 link set dev veth10 up
  $ ip -netns ns0 address add 192.0.2.10/32 dev veth01
  $ ip -netns ns1 address add 192.0.2.11/32 dev veth10

  Add a route to ns1 in ns0:
  $ ip -netns ns0 route add 192.0.2.11/32 dev veth01

  In ns1, only packets with TOS 4 can be routed to ns0:
  $ ip -netns ns1 route add 192.0.2.10/32 tos 4 dev veth10

  Ping from ns0 to ns1 works regardless of the ECN bits, as long as TOS
  is 4:
  $ ip netns exec ns0 ping -Q 4 192.0.2.11   # TOS 4, Not-ECT
    ... 0% packet loss ...
  $ ip netns exec ns0 ping -Q 5 192.0.2.11   # TOS 4, ECT(1)
    ... 0% packet loss ...
  $ ip netns exec ns0 ping -Q 6 192.0.2.11   # TOS 4, ECT(0)
    ... 0% packet loss ...
  $ ip netns exec ns0 ping -Q 7 192.0.2.11   # TOS 4, CE
    ... 0% packet loss ...

  Now use iptable's rpfilter module in ns1:
  $ ip netns exec ns1 iptables-legacy -t raw -A PREROUTING -m rpfilter --invert -j DROP

  Not-ECT and ECT(1) packets still pass:
  $ ip netns exec ns0 ping -Q 4 192.0.2.11   # TOS 4, Not-ECT
    ... 0% packet loss ...
  $ ip netns exec ns0 ping -Q 5 192.0.2.11   # TOS 4, ECT(1)
    ... 0% packet loss ...

  But ECT(0) and ECN packets are dropped:
  $ ip netns exec ns0 ping -Q 6 192.0.2.11   # TOS 4, ECT(0)
    ... 100% packet loss ...
  $ ip netns exec ns0 ping -Q 7 192.0.2.11   # TOS 4, CE
    ... 100% packet loss ...

After this patch, rpfilter doesn't drop ECT(0) and CE packets anymore.

Fixes: 8f97339d3feb ("netfilter: add ipv4 reverse path filter match")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
---
 net/ipv4/netfilter/ipt_rpfilter.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/net/ipv4/netfilter/ipt_rpfilter.c b/net/ipv4/netfilter/ipt_rpfilter.c
index cc23f1ce239c..8cd3224d913e 100644
--- a/net/ipv4/netfilter/ipt_rpfilter.c
+++ b/net/ipv4/netfilter/ipt_rpfilter.c
@@ -76,7 +76,7 @@  static bool rpfilter_mt(const struct sk_buff *skb, struct xt_action_param *par)
 	flow.daddr = iph->saddr;
 	flow.saddr = rpfilter_get_saddr(iph->daddr);
 	flow.flowi4_mark = info->flags & XT_RPFILTER_VALID_MARK ? skb->mark : 0;
-	flow.flowi4_tos = RT_TOS(iph->tos);
+	flow.flowi4_tos = iph->tos & IPTOS_RT_MASK;
 	flow.flowi4_scope = RT_SCOPE_UNIVERSE;
 	flow.flowi4_oif = l3mdev_master_ifindex_rcu(xt_in(par));