diff mbox series

[net,v2,1/5] net: ethernet: mtk_eth_soc: reapply mdc divider on reset

Message ID 8ab7381447e6cdcb317d5b5a6ddd90a1734efcb0.1744764277.git.daniel@makrotopia.org (mailing list archive)
State New
Delegated to: Netdev Maintainers
Headers show
Series [net,v2,1/5] net: ethernet: mtk_eth_soc: reapply mdc divider on reset | expand

Checks

Context Check Description
netdev/series_format warning Series does not have a cover letter
netdev/tree_selection success Clearly marked for net
netdev/ynl success Generated files up to date; no warnings/errors; no diff in generated;
netdev/fixes_present success Fixes tag present in non-next series
netdev/header_inline success No static functions without inline keyword in header files
netdev/build_32bit success Errors and warnings before: 1 this patch: 1
netdev/build_tools success No tools touched, skip
netdev/cc_maintainers success CCed 14 of 14 maintainers
netdev/build_clang success Errors and warnings before: 2 this patch: 2
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/deprecated_api success None detected
netdev/check_selftest success No net selftest shell script
netdev/verify_fixes success Fixes tag looks correct
netdev/build_allmodconfig_warn success Errors and warnings before: 12 this patch: 12
netdev/checkpatch warning WARNING: line length of 88 exceeds 80 columns
netdev/build_clang_rust success No Rust files in patch. Skipping build
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/source_inline success Was 0 now: 0
netdev/contest warning net-next-2025-04-16--06-00 (tests: 322)

Commit Message

Daniel Golle April 16, 2025, 12:50 a.m. UTC 
From: Bo-Cun Chen <bc-bocun.chen@mediatek.com>

In the current method, the MDC divider was reset to the default setting
of 2.5MHz after the NETSYS SER. Therefore, we need to reapply the MDC
divider configuration function in mtk_hw_init() after reset.

Fixes: c0a440031d431 ("net: ethernet: mtk_eth_soc: set MDIO bus clock frequency")
Signed-off-by: Bo-Cun Chen <bc-bocun.chen@mediatek.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
v2: * only parse DT once, store divider in struct mtk_eth
    * make sure MDC is configured before calling of_mdiobus_register()
    * reapply after reset

 drivers/net/ethernet/mediatek/mtk_eth_soc.c | 39 +++++++++++++--------
 drivers/net/ethernet/mediatek/mtk_eth_soc.h |  1 +
 2 files changed, 25 insertions(+), 15 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
index 43197b28b3e74..1a235283b0e9b 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c
@@ -871,9 +871,25 @@  static const struct phylink_mac_ops mtk_phylink_ops = {
 	.mac_enable_tx_lpi = mtk_mac_enable_tx_lpi,
 };
 
+static void mtk_mdio_config(struct mtk_eth *eth)
+{
+	u32 val;
+
+	/* Configure MDC Divider */
+	val = FIELD_PREP(PPSC_MDC_CFG, eth->mdc_divider);
+
+	/* Configure MDC Turbo Mode */
+	if (mtk_is_netsys_v3_or_greater(eth))
+		mtk_m32(eth, 0, MISC_MDC_TURBO, MTK_MAC_MISC_V3);
+	else
+		val |= PPSC_MDC_TURBO;
+
+	mtk_m32(eth, PPSC_MDC_CFG, val, MTK_PPSC);
+}
+
 static int mtk_mdio_init(struct mtk_eth *eth)
 {
-	unsigned int max_clk = 2500000, divider;
+	unsigned int max_clk = 2500000;
 	struct device_node *mii_np;
 	int ret;
 	u32 val;
@@ -908,20 +924,9 @@  static int mtk_mdio_init(struct mtk_eth *eth)
 		}
 		max_clk = val;
 	}
-	divider = min_t(unsigned int, DIV_ROUND_UP(MDC_MAX_FREQ, max_clk), 63);
-
-	/* Configure MDC Turbo Mode */
-	if (mtk_is_netsys_v3_or_greater(eth))
-		mtk_m32(eth, 0, MISC_MDC_TURBO, MTK_MAC_MISC_V3);
-
-	/* Configure MDC Divider */
-	val = FIELD_PREP(PPSC_MDC_CFG, divider);
-	if (!mtk_is_netsys_v3_or_greater(eth))
-		val |= PPSC_MDC_TURBO;
-	mtk_m32(eth, PPSC_MDC_CFG, val, MTK_PPSC);
-
-	dev_dbg(eth->dev, "MDC is running on %d Hz\n", MDC_MAX_FREQ / divider);
-
+	eth->mdc_divider = min_t(unsigned int, DIV_ROUND_UP(MDC_MAX_FREQ, max_clk), 63);
+	mtk_mdio_config(eth);
+	dev_dbg(eth->dev, "MDC is running on %d Hz\n", MDC_MAX_FREQ / eth->mdc_divider);
 	ret = of_mdiobus_register(eth->mii_bus, mii_np);
 
 err_put_node:
@@ -3974,6 +3979,10 @@  static int mtk_hw_init(struct mtk_eth *eth, bool reset)
 	else
 		mtk_hw_reset(eth);
 
+	/* No MT7628/88 support yet */
+	if (reset && !MTK_HAS_CAPS(eth->soc->caps, MTK_SOC_MT7628))
+		mtk_mdio_config(eth);
+
 	if (mtk_is_netsys_v3_or_greater(eth)) {
 		/* Set FE to PDMAv2 if necessary */
 		val = mtk_r32(eth, MTK_FE_GLO_MISC);
diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.h b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
index 90a377ab4359e..39709649ea8d1 100644
--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h
+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h
@@ -1271,6 +1271,7 @@  struct mtk_eth {
 	struct clk			*clks[MTK_CLK_MAX];
 
 	struct mii_bus			*mii_bus;
+	unsigned int			mdc_divider;
 	struct work_struct		pending_work;
 	unsigned long			state;