diff mbox series

[net-next,4/5] net: dsa: hellcreek: convert to phylink_generic_validate()

Message ID E1ms2tf-00ECJN-Ag@rmk-PC.armlinux.org.uk (mailing list archive)
State Accepted
Commit 1c9e7fd2a579c7c3288264f6e90b9c0a3388dbf9
Delegated to: Netdev Maintainers
Headers show
Series net: dsa: convert two drivers to phylink_generic_validate() | expand

Checks

Context Check Description
netdev/tree_selection success Clearly marked for net-next
netdev/fixes_present success Fixes tag not required for -next series
netdev/subject_prefix success Link
netdev/cover_letter success Series has a cover letter
netdev/patch_count success Link
netdev/header_inline success No static functions without inline keyword in header files
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/cc_maintainers warning 1 maintainers not CCed: linux@armlinux.org.uk
netdev/build_clang success Errors and warnings before: 0 this patch: 0
netdev/module_param success Was 0 now: 0
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/verify_fixes success No Fixes tag
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 46 lines checked
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/source_inline success Was 0 now: 0

Commit Message

Russell King (Oracle) Nov. 30, 2021, 1:10 p.m. UTC 
Populate the supported interfaces and MAC capabilities for the
hellcreek DSA switch and remove the old validate implementation to
allow DSA to use phylink_generic_validate() for this switch driver.

The switch actually only supports MII and RGMII, but as phylib defaults
to GMII, we need to include this interface mode to keep existing DT
working.

Reviewed-by: Kurt Kanzenbach <kurt@linutronix.de>
Tested-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 drivers/net/dsa/hirschmann/hellcreek.c | 24 +++++++++++++-----------
 1 file changed, 13 insertions(+), 11 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/dsa/hirschmann/hellcreek.c b/drivers/net/dsa/hirschmann/hellcreek.c
index 4e0b53d94b52..86839b43011b 100644
--- a/drivers/net/dsa/hirschmann/hellcreek.c
+++ b/drivers/net/dsa/hirschmann/hellcreek.c
@@ -1384,14 +1384,19 @@  static void hellcreek_teardown(struct dsa_switch *ds)
 	dsa_devlink_resources_unregister(ds);
 }
 
-static void hellcreek_phylink_validate(struct dsa_switch *ds, int port,
-				       unsigned long *supported,
-				       struct phylink_link_state *state)
+static void hellcreek_phylink_get_caps(struct dsa_switch *ds, int port,
+				       struct phylink_config *config)
 {
-	__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, };
 	struct hellcreek *hellcreek = ds->priv;
 
-	dev_dbg(hellcreek->dev, "Phylink validate for port %d\n", port);
+	__set_bit(PHY_INTERFACE_MODE_MII, config->supported_interfaces);
+	__set_bit(PHY_INTERFACE_MODE_RGMII, config->supported_interfaces);
+
+	/* Include GMII - the hardware does not support this interface
+	 * mode, but it's the default interface mode for phylib, so we
+	 * need it for compatibility with existing DT.
+	 */
+	__set_bit(PHY_INTERFACE_MODE_GMII, config->supported_interfaces);
 
 	/* The MAC settings are a hardware configuration option and cannot be
 	 * changed at run time or by strapping. Therefore the attached PHYs
@@ -1399,12 +1404,9 @@  static void hellcreek_phylink_validate(struct dsa_switch *ds, int port,
 	 * by the hardware.
 	 */
 	if (hellcreek->pdata->is_100_mbits)
-		phylink_set(mask, 100baseT_Full);
+		config->mac_capabilities = MAC_100FD;
 	else
-		phylink_set(mask, 1000baseT_Full);
-
-	linkmode_and(supported, supported, mask);
-	linkmode_and(state->advertising, state->advertising, mask);
+		config->mac_capabilities = MAC_1000FD;
 }
 
 static int
@@ -1755,7 +1757,7 @@  static const struct dsa_switch_ops hellcreek_ds_ops = {
 	.get_strings	       = hellcreek_get_strings,
 	.get_tag_protocol      = hellcreek_get_tag_protocol,
 	.get_ts_info	       = hellcreek_get_ts_info,
-	.phylink_validate      = hellcreek_phylink_validate,
+	.phylink_get_caps      = hellcreek_phylink_get_caps,
 	.port_bridge_flags     = hellcreek_bridge_flags,
 	.port_bridge_join      = hellcreek_port_bridge_join,
 	.port_bridge_leave     = hellcreek_port_bridge_leave,