diff mbox series

[net-next] net: dsa: realtek: convert to phylink_generic_validate()

Message ID E1nFIVZ-006Lgp-0o@rmk-PC.armlinux.org.uk (mailing list archive)
State Accepted
Commit 6ff6064605e96db40c7e95c4924518028cd827bf
Delegated to: Netdev Maintainers
Headers show
Series [net-next] net: dsa: realtek: convert to phylink_generic_validate() | expand

Checks

Context Check Description
netdev/tree_selection success Clearly marked for net-next
netdev/fixes_present success Fixes tag not required for -next series
netdev/subject_prefix success Link
netdev/cover_letter success Single patches do not need cover letters
netdev/patch_count success Link
netdev/header_inline success No static functions without inline keyword in header files
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/cc_maintainers warning 1 maintainers not CCed: linux@armlinux.org.uk
netdev/build_clang success Errors and warnings before: 0 this patch: 0
netdev/module_param success Was 0 now: 0
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/verify_fixes success No Fixes tag
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 65 lines checked
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/source_inline success Was 0 now: 0

Commit Message

Russell King (Oracle) Feb. 2, 2022, 4:29 p.m. UTC 
Populate the supported interfaces and MAC capabilities for the Realtek
rtl8365 DSA switch and remove the old validate implementation to allow
DSA to use phylink_generic_validate() for this switch driver.

Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
I seem to have missed this driver, so here's an update for it - but only
build tested.

 drivers/net/dsa/realtek/rtl8365mb.c | 46 ++++++++---------------------
 1 file changed, 12 insertions(+), 34 deletions(-)

Comments

patchwork-bot+netdevbpf@kernel.org Feb. 4, 2022, 10:40 a.m. UTC | #1 
Hello:

This patch was applied to netdev/net-next.git (master)
by David S. Miller <davem@davemloft.net>:

On Wed, 02 Feb 2022 16:29:25 +0000 you wrote:
> Populate the supported interfaces and MAC capabilities for the Realtek
> rtl8365 DSA switch and remove the old validate implementation to allow
> DSA to use phylink_generic_validate() for this switch driver.
> 
> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
> ---
> I seem to have missed this driver, so here's an update for it - but only
> build tested.
> 
> [...]

Here is the summary with links:
  - [net-next] net: dsa: realtek: convert to phylink_generic_validate()
    https://git.kernel.org/netdev/net-next/c/6ff6064605e9

You are awesome, thank you!
diff mbox series

Patch

diff --git a/drivers/net/dsa/realtek/rtl8365mb.c b/drivers/net/dsa/realtek/rtl8365mb.c
index e1c5a67a21c4..2ed592147c20 100644
--- a/drivers/net/dsa/realtek/rtl8365mb.c
+++ b/drivers/net/dsa/realtek/rtl8365mb.c
@@ -952,39 +952,17 @@  static bool rtl8365mb_phy_mode_supported(struct dsa_switch *ds, int port,
 	return false;
 }
 
-static void rtl8365mb_phylink_validate(struct dsa_switch *ds, int port,
-				       unsigned long *supported,
-				       struct phylink_link_state *state)
+static void rtl8365mb_phylink_get_caps(struct dsa_switch *ds, int port,
+				       struct phylink_config *config)
 {
-	struct realtek_priv *priv = ds->priv;
-	__ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0 };
-
-	/* include/linux/phylink.h says:
-	 *     When @state->interface is %PHY_INTERFACE_MODE_NA, phylink
-	 *     expects the MAC driver to return all supported link modes.
-	 */
-	if (state->interface != PHY_INTERFACE_MODE_NA &&
-	    !rtl8365mb_phy_mode_supported(ds, port, state->interface)) {
-		dev_err(priv->dev, "phy mode %s is unsupported on port %d\n",
-			phy_modes(state->interface), port);
-		linkmode_zero(supported);
-		return;
-	}
-
-	phylink_set_port_modes(mask);
-
-	phylink_set(mask, Autoneg);
-	phylink_set(mask, Pause);
-	phylink_set(mask, Asym_Pause);
-
-	phylink_set(mask, 10baseT_Half);
-	phylink_set(mask, 10baseT_Full);
-	phylink_set(mask, 100baseT_Half);
-	phylink_set(mask, 100baseT_Full);
-	phylink_set(mask, 1000baseT_Full);
-
-	linkmode_and(supported, supported, mask);
-	linkmode_and(state->advertising, state->advertising, mask);
+	if (dsa_is_user_port(ds, port))
+		__set_bit(PHY_INTERFACE_MODE_INTERNAL,
+			  config->supported_interfaces);
+	else if (dsa_is_cpu_port(ds, port))
+		phy_interface_set_rgmii(config->supported_interfaces);
+
+	config->mac_capabilities = MAC_SYM_PAUSE | MAC_ASYM_PAUSE |
+				   MAC_10 | MAC_100 | MAC_1000FD;
 }
 
 static void rtl8365mb_phylink_mac_config(struct dsa_switch *ds, int port,
@@ -2020,7 +1998,7 @@  static const struct dsa_switch_ops rtl8365mb_switch_ops_smi = {
 	.get_tag_protocol = rtl8365mb_get_tag_protocol,
 	.setup = rtl8365mb_setup,
 	.teardown = rtl8365mb_teardown,
-	.phylink_validate = rtl8365mb_phylink_validate,
+	.phylink_get_caps = rtl8365mb_phylink_get_caps,
 	.phylink_mac_config = rtl8365mb_phylink_mac_config,
 	.phylink_mac_link_down = rtl8365mb_phylink_mac_link_down,
 	.phylink_mac_link_up = rtl8365mb_phylink_mac_link_up,
@@ -2038,7 +2016,7 @@  static const struct dsa_switch_ops rtl8365mb_switch_ops_mdio = {
 	.get_tag_protocol = rtl8365mb_get_tag_protocol,
 	.setup = rtl8365mb_setup,
 	.teardown = rtl8365mb_teardown,
-	.phylink_validate = rtl8365mb_phylink_validate,
+	.phylink_get_caps = rtl8365mb_phylink_get_caps,
 	.phylink_mac_config = rtl8365mb_phylink_mac_config,
 	.phylink_mac_link_down = rtl8365mb_phylink_mac_link_down,
 	.phylink_mac_link_up = rtl8365mb_phylink_mac_link_up,