Message ID | E1nFfxK-006X72-Es@rmk-PC.armlinux.org.uk (mailing list archive) |
---|---|
State | RFC |
Delegated to: | Netdev Maintainers |
Headers | show |
Series | net: dsa: mt7530: updates for phylink changes | expand |
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c index cbdf4a58e507..a2fa629cccc0 100644 --- a/drivers/net/dsa/mt7530.c +++ b/drivers/net/dsa/mt7530.c @@ -2523,9 +2523,6 @@ static void mt7531_sgmii_validate(struct mt7530_priv *priv, int port, */ switch (port) { case 5: - if (mt7531_is_rgmii_port(priv, port)) - break; - fallthrough; case 6: if (interface == PHY_INTERFACE_MODE_2500BASEX) { phylink_set(supported, 2500baseX_Full);
When using an external PHY connected using RGMII to mt7531 port 5, the PHY can be used to used support 1000baseX connections. Therefore, it makes no sense to exclude this from the linkmodes permitted for mt7531 port 5, so allow 1000baseX. Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> --- drivers/net/dsa/mt7530.c | 3 --- 1 file changed, 3 deletions(-)