diff mbox series

[net-next,1/2] net: dsa: add support for mac_prepare() and mac_finish() calls

Message ID E1q28Mm-007tpp-UF@rmk-PC.armlinux.org.uk (mailing list archive)
State Accepted
Commit dd805cf3e80e038aeb06902399ce9bd6fafb4ff3
Delegated to: Netdev Maintainers
Headers show
Series net: dsa: mv88e6xxx: prepare for phylink_pcs conversion | expand

Checks

Context Check Description
netdev/series_format success Posting correctly formatted
netdev/tree_selection success Clearly marked for net-next
netdev/fixes_present success Fixes tag not required for -next series
netdev/header_inline success No static functions without inline keyword in header files
netdev/build_32bit success Errors and warnings before: 26 this patch: 26
netdev/cc_maintainers success CCed 9 of 9 maintainers
netdev/build_clang success Errors and warnings before: 13 this patch: 13
netdev/verify_signedoff success Signed-off-by tag matches author and committer
netdev/deprecated_api success None detected
netdev/check_selftest success No net selftest shell script
netdev/verify_fixes success No Fixes tag
netdev/build_allmodconfig_warn success Errors and warnings before: 26 this patch: 26
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 66 lines checked
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/source_inline success Was 0 now: 0

Commit Message

Russell King (Oracle) May 25, 2023, 10:38 a.m. UTC 
Add DSA support for the phylink mac_prepare() and mac_finish() calls.
These were introduced as part of the PCS support to allow MACs to
perform preparatory steps prior to configuration, and finalisation
steps after the MAC and PCS has been configured.

Introducing phylink_pcs support to the mv88e6xxx DSA driver needs some
code moved out of its mac_config() stage into the mac_prepare() and
mac_finish() stages, and this commit facilitates such code in DSA
drivers.

Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
---
 include/net/dsa.h |  6 ++++++
 net/dsa/port.c    | 32 ++++++++++++++++++++++++++++++++
 2 files changed, 38 insertions(+)

Comments

Simon Horman May 26, 2023, 9:18 a.m. UTC | #1 
On Thu, May 25, 2023 at 11:38:44AM +0100, Russell King (Oracle) wrote:
> Add DSA support for the phylink mac_prepare() and mac_finish() calls.
> These were introduced as part of the PCS support to allow MACs to
> perform preparatory steps prior to configuration, and finalisation
> steps after the MAC and PCS has been configured.
> 
> Introducing phylink_pcs support to the mv88e6xxx DSA driver needs some
> code moved out of its mac_config() stage into the mac_prepare() and
> mac_finish() stages, and this commit facilitates such code in DSA
> drivers.
> 
> Reviewed-by: Andrew Lunn <andrew@lunn.ch>
> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>

Reviewed-by: Simon Horman <simon.horman@corigine.com>
diff mbox series

Patch

diff --git a/include/net/dsa.h b/include/net/dsa.h
index 8903053fa5aa..75022cf771cf 100644
--- a/include/net/dsa.h
+++ b/include/net/dsa.h
@@ -867,9 +867,15 @@  struct dsa_switch_ops {
 						      phy_interface_t iface);
 	int	(*phylink_mac_link_state)(struct dsa_switch *ds, int port,
 					  struct phylink_link_state *state);
+	int	(*phylink_mac_prepare)(struct dsa_switch *ds, int port,
+				       unsigned int mode,
+				       phy_interface_t interface);
 	void	(*phylink_mac_config)(struct dsa_switch *ds, int port,
 				      unsigned int mode,
 				      const struct phylink_link_state *state);
+	int	(*phylink_mac_finish)(struct dsa_switch *ds, int port,
+				      unsigned int mode,
+				      phy_interface_t interface);
 	void	(*phylink_mac_an_restart)(struct dsa_switch *ds, int port);
 	void	(*phylink_mac_link_down)(struct dsa_switch *ds, int port,
 					 unsigned int mode,
diff --git a/net/dsa/port.c b/net/dsa/port.c
index 71ba30538411..0ce8fd311c78 100644
--- a/net/dsa/port.c
+++ b/net/dsa/port.c
@@ -1603,6 +1603,21 @@  dsa_port_phylink_mac_select_pcs(struct phylink_config *config,
 	return pcs;
 }
 
+static int dsa_port_phylink_mac_prepare(struct phylink_config *config,
+					unsigned int mode,
+					phy_interface_t interface)
+{
+	struct dsa_port *dp = container_of(config, struct dsa_port, pl_config);
+	struct dsa_switch *ds = dp->ds;
+	int err = 0;
+
+	if (ds->ops->phylink_mac_prepare)
+		err = ds->ops->phylink_mac_prepare(ds, dp->index, mode,
+						   interface);
+
+	return err;
+}
+
 static void dsa_port_phylink_mac_config(struct phylink_config *config,
 					unsigned int mode,
 					const struct phylink_link_state *state)
@@ -1616,6 +1631,21 @@  static void dsa_port_phylink_mac_config(struct phylink_config *config,
 	ds->ops->phylink_mac_config(ds, dp->index, mode, state);
 }
 
+static int dsa_port_phylink_mac_finish(struct phylink_config *config,
+				       unsigned int mode,
+				       phy_interface_t interface)
+{
+	struct dsa_port *dp = container_of(config, struct dsa_port, pl_config);
+	struct dsa_switch *ds = dp->ds;
+	int err = 0;
+
+	if (ds->ops->phylink_mac_finish)
+		err = ds->ops->phylink_mac_finish(ds, dp->index, mode,
+						  interface);
+
+	return err;
+}
+
 static void dsa_port_phylink_mac_an_restart(struct phylink_config *config)
 {
 	struct dsa_port *dp = container_of(config, struct dsa_port, pl_config);
@@ -1671,7 +1701,9 @@  static const struct phylink_mac_ops dsa_port_phylink_mac_ops = {
 	.validate = dsa_port_phylink_validate,
 	.mac_select_pcs = dsa_port_phylink_mac_select_pcs,
 	.mac_pcs_get_state = dsa_port_phylink_mac_pcs_get_state,
+	.mac_prepare = dsa_port_phylink_mac_prepare,
 	.mac_config = dsa_port_phylink_mac_config,
+	.mac_finish = dsa_port_phylink_mac_finish,
 	.mac_an_restart = dsa_port_phylink_mac_an_restart,
 	.mac_link_down = dsa_port_phylink_mac_link_down,
 	.mac_link_up = dsa_port_phylink_mac_link_up,