@@ -1530,7 +1530,7 @@ int genphy_c45_ethtool_get_eee(struct phy_device *phydev,
return ret;
data->eee_enabled = is_enabled;
- data->eee_active = ret;
+ data->eee_active = phydev->eee_active;
linkmode_copy(data->supported, phydev->supported_eee);
return 0;
@@ -990,14 +990,14 @@ static int phy_check_link_status(struct phy_device *phydev)
phydev->state = PHY_RUNNING;
err = genphy_c45_eee_is_active(phydev,
NULL, NULL, NULL);
- if (err <= 0)
- phydev->enable_tx_lpi = false;
- else
- phydev->enable_tx_lpi = phydev->eee_cfg.tx_lpi_enabled;
+ phydev->eee_active = err > 0;
+ phydev->enable_tx_lpi = phydev->eee_cfg.tx_lpi_enabled &&
+ phydev->eee_active;
phy_link_up(phydev);
} else if (!phydev->link && phydev->state != PHY_NOLINK) {
phydev->state = PHY_NOLINK;
+ phydev->eee_active = false;
phydev->enable_tx_lpi = false;
phy_link_down(phydev);
}
@@ -1685,15 +1685,21 @@ EXPORT_SYMBOL(phy_ethtool_get_eee);
static void phy_ethtool_set_eee_noneg(struct phy_device *phydev,
const struct eee_config *old_cfg)
{
- if (phydev->eee_cfg.tx_lpi_enabled != old_cfg->tx_lpi_enabled ||
+ bool enable_tx_lpi;
+
+ if (!phydev->link)
+ return;
+
+ enable_tx_lpi = phydev->eee_cfg.tx_lpi_enabled && phydev->eee_active;
+
+ if (phydev->enable_tx_lpi != enable_tx_lpi ||
phydev->eee_cfg.tx_lpi_timer != old_cfg->tx_lpi_timer) {
- phydev->enable_tx_lpi = eeecfg_mac_can_tx_lpi(&phydev->eee_cfg);
- if (phydev->link) {
- phydev->link = false;
- phy_link_down(phydev);
- phydev->link = true;
- phy_link_up(phydev);
- }
+ phydev->enable_tx_lpi = false;
+ phydev->link = false;
+ phy_link_down(phydev);
+ phydev->enable_tx_lpi = enable_tx_lpi;
+ phydev->link = true;
+ phy_link_up(phydev);
}
}
@@ -602,6 +602,7 @@ struct macsec_ops;
* @supported_eee: supported PHY EEE linkmodes
* @advertising_eee: Currently advertised EEE linkmodes
* @enable_tx_lpi: When True, MAC should transmit LPI to PHY
+ * @eee_active: phylib private state, indicating that EEE has been negotiated
* @eee_cfg: User configuration of EEE
* @lp_advertising: Current link partner advertised linkmodes
* @host_interfaces: PHY interface modes supported by host
@@ -723,6 +724,7 @@ struct phy_device {
/* Energy efficient ethernet modes which should be prohibited */
__ETHTOOL_DECLARE_LINK_MODE_MASK(eee_broken_modes);
bool enable_tx_lpi;
+ bool eee_active;
struct eee_config eee_cfg;
/* Host supported PHY interface types. Should be ignored if empty. */
When phy_ethtool_set_eee_noneg() detects a change in the LPI parameters, it attempts to update phylib state and trigger the link to cycle so the MAC sees the updated parameters. However, in doing so, it sets phydev->enable_tx_lpi depending on whether the EEE configuration allows the MAC to generate LPI without taking into account the result of negotiation. This can be demonstrated with a 1000base-T FD interface by: # ethtool --set-eee eno0 advertise 8 # cause EEE to be not negotiated # ethtool --set-eee eno0 tx-lpi off # ethtool --set-eee eno0 tx-lpi on This results in being true, despite EEE not having been negotiated and: # ethtool --show-eee eno0 EEE status: enabled - inactive Tx LPI: 250 (us) Supported EEE link modes: 100baseT/Full 1000baseT/Full Advertised EEE link modes: 100baseT/Full 1000baseT/Full Fix this by keeping track of whether EEE was negotiated via a new eee_active member in struct phy_device, and include this state in the decision whether phydev->enable_tx_lpi should be set. Fixes: 3e43b903da04 ("net: phy: Immediately call adjust_link if only tx_lpi_enabled changes") Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> --- v3: - fixed kernel-doc - added fixes tag - rebased on Heiner's patch: https://patchwork.kernel.org/project/netdevbpf/patch/a5efc274-ce58-49f3-ac8a-5384d9b41695@gmail.com/ As such, not added Andrew's r-b. drivers/net/phy/phy-c45.c | 2 +- drivers/net/phy/phy.c | 30 ++++++++++++++++++------------ include/linux/phy.h | 2 ++ 3 files changed, 21 insertions(+), 13 deletions(-)