@@ -3960,20 +3960,27 @@ static struct mvneta_port *mvneta_pcs_to_port(struct phylink_pcs *pcs)
return container_of(pcs, struct mvneta_port, phylink_pcs);
}
-static int mvneta_pcs_validate(struct phylink_pcs *pcs,
- unsigned long *supported,
- const struct phylink_link_state *state)
+static unsigned int mvneta_pcs_inband_caps(struct phylink_pcs *pcs,
+ phy_interface_t interface)
{
- /* We only support QSGMII, SGMII, 802.3z and RGMII modes.
- * When in 802.3z mode, we must have AN enabled:
+ /* When operating in an 802.3z mode, we must have AN enabled:
* "Bit 2 Field InBandAnEn In-band Auto-Negotiation enable. ...
* When <PortType> = 1 (1000BASE-X) this field must be set to 1."
+ * Therefore, inband is "required".
*/
- if (phy_interface_mode_is_8023z(state->interface) &&
- !phylink_test(state->advertising, Autoneg))
- return -EINVAL;
+ if (phy_interface_mode_is_8023z(interface))
+ return LINK_INBAND_ENABLE;
- return 0;
+ /* QSGMII, SGMII and RGMII can be configured to use inband
+ * signalling of the AN result. Indicate these as "possible".
+ */
+ if (interface == PHY_INTERFACE_MODE_SGMII ||
+ interface == PHY_INTERFACE_MODE_QSGMII ||
+ phy_interface_mode_is_rgmii(interface))
+ return LINK_INBAND_DISABLE | LINK_INBAND_ENABLE;
+
+ /* For any other modes, indicate that inband is not supported. */
+ return LINK_INBAND_DISABLE;
}
static void mvneta_pcs_get_state(struct phylink_pcs *pcs,
@@ -4071,7 +4078,7 @@ static void mvneta_pcs_an_restart(struct phylink_pcs *pcs)
}
static const struct phylink_pcs_ops mvneta_phylink_pcs_ops = {
- .pcs_validate = mvneta_pcs_validate,
+ .pcs_inband_caps = mvneta_pcs_inband_caps,
.pcs_get_state = mvneta_pcs_get_state,
.pcs_config = mvneta_pcs_config,
.pcs_an_restart = mvneta_pcs_an_restart,