diff mbox series

[net-next,7/7] dpaa_eth: implement the A050385 erratum workaround for XDP

Message ID a3710846e0e831969ff5e769b1813c70a3d33d8b.1605181416.git.camelia.groza@nxp.com (mailing list archive)
State Superseded
Delegated to: Netdev Maintainers
Headers show
Series dpaa_eth: add XDP support | expand

Checks

Context Check Description
netdev/cover_letter success Link
netdev/fixes_present success Link
netdev/patch_count success Link
netdev/tree_selection success Clearly marked for net-next
netdev/subject_prefix success Link
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success Link
netdev/checkpatch success total: 0 errors, 0 warnings, 0 checks, 114 lines checked
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/header_inline success Link
netdev/stable success Stable not CCed

Commit Message

Camelia Alexandra Groza Nov. 12, 2020, 6:10 p.m. UTC
For XDP TX, even tough we start out with correctly aligned buffers, the
XDP program might change the data's alignment. For REDIRECT, we have no
control over the alignment either.

Create a new workaround for xdp_frame structures to verify the erratum
conditions and move the data to a fresh buffer if necessary. Create a new
xdp_frame for managing the new buffer and free the old one using the XDP
API.

Due to alignment constraints, all frames have a 256 byte headroom that
is offered fully to XDP under the erratum. If the XDP program uses all
of it, the data needs to be move to make room for the xdpf backpointer.

Disable the metadata support since the information can be lost.

Signed-off-by: Camelia Groza <camelia.groza@nxp.com>
---
 drivers/net/ethernet/freescale/dpaa/dpaa_eth.c | 82 +++++++++++++++++++++++++-
 1 file changed, 79 insertions(+), 3 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
index 4b6fbbf..0418153 100644
--- a/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
+++ b/drivers/net/ethernet/freescale/dpaa/dpaa_eth.c
@@ -2171,6 +2171,52 @@  static int dpaa_a050385_wa_skb(struct net_device *net_dev, struct sk_buff **s)
 
 	return 0;
 }
+
+static int dpaa_a050385_wa_xdpf(struct dpaa_priv *priv,
+				struct xdp_frame **init_xdpf)
+{
+	struct xdp_frame *new_xdpf, *xdpf = *init_xdpf;
+	void *new_buff;
+	struct page *p;
+
+	/* Check the data alignment and make sure the headroom is large
+	 * enough to store the xdpf backpointer. Use an aligned headroom
+	 * value.
+	 *
+	 * Due to alignment constraints, we give XDP access to the full 256
+	 * byte frame headroom. If the XDP program uses all of it, copy the
+	 * data to a new buffer and make room for storing the backpointer.
+	 */
+	if (PTR_IS_ALIGNED(xdpf->data, DPAA_A050385_ALIGN) &&
+	    xdpf->headroom >= priv->tx_headroom) {
+		xdpf->headroom = priv->tx_headroom;
+		return 0;
+	}
+
+	p = dev_alloc_pages(0);
+	if (unlikely(!p))
+		return -ENOMEM;
+
+	/* Copy the data to the new buffer at a properly aligned offset */
+	new_buff = page_address(p);
+	memcpy(new_buff + priv->tx_headroom, xdpf->data, xdpf->len);
+
+	/* Create an XDP frame around the new buffer in a similar fashion
+	 * to xdp_convert_buff_to_frame.
+	 */
+	new_xdpf = new_buff;
+	new_xdpf->data = new_buff + priv->tx_headroom;
+	new_xdpf->len = xdpf->len;
+	new_xdpf->headroom = priv->tx_headroom;
+	new_xdpf->frame_sz = DPAA_BP_RAW_SIZE;
+	new_xdpf->mem.type = MEM_TYPE_PAGE_ORDER0;
+
+	/* Release the initial buffer */
+	xdp_return_frame_rx_napi(xdpf);
+
+	*init_xdpf = new_xdpf;
+	return 0;
+}
 #endif
 
 static netdev_tx_t
@@ -2407,6 +2453,15 @@  static int dpaa_xdp_xmit_frame(struct net_device *net_dev,
 	percpu_priv = this_cpu_ptr(priv->percpu_priv);
 	percpu_stats = &percpu_priv->stats;
 
+#ifdef CONFIG_DPAA_ERRATUM_A050385
+	if (unlikely(fman_has_errata_a050385())) {
+		if (dpaa_a050385_wa_xdpf(priv, &xdpf)) {
+			err = -ENOMEM;
+			goto out_error;
+		}
+	}
+#endif
+
 	if (xdpf->headroom < DPAA_TX_PRIV_DATA_SIZE) {
 		err = -EINVAL;
 		goto out_error;
@@ -2480,6 +2535,20 @@  static u32 dpaa_run_xdp(struct dpaa_priv *priv, struct qm_fd *fd, void *vaddr,
 	xdp.frame_sz = DPAA_BP_RAW_SIZE - DPAA_TX_PRIV_DATA_SIZE;
 	xdp.rxq = &dpaa_fq->xdp_rxq;
 
+	/* We reserve a fixed headroom of 256 bytes under the erratum and we
+	 * offer it all to XDP programs to use. If no room is left for the
+	 * xdpf backpointer on TX, we will need to copy the data.
+	 * Disable metadata support since data realignments might be required
+	 * and the information can be lost.
+	 */
+#ifdef CONFIG_DPAA_ERRATUM_A050385
+	if (unlikely(fman_has_errata_a050385())) {
+		xdp_set_data_meta_invalid(&xdp);
+		xdp.data_hard_start = vaddr;
+		xdp.frame_sz = DPAA_BP_RAW_SIZE;
+	}
+#endif
+
 	xdp_act = bpf_prog_run_xdp(xdp_prog, &xdp);
 
 	/* Update the length and the offset of the FD */
@@ -2487,7 +2556,8 @@  static u32 dpaa_run_xdp(struct dpaa_priv *priv, struct qm_fd *fd, void *vaddr,
 
 	switch (xdp_act) {
 	case XDP_PASS:
-		*xdp_meta_len = xdp.data - xdp.data_meta;
+		*xdp_meta_len = xdp_data_meta_unsupported(&xdp) ? 0 :
+				xdp.data - xdp.data_meta;
 		break;
 	case XDP_TX:
 		/* We can access the full headroom when sending the frame
@@ -3177,10 +3247,16 @@  static u16 dpaa_get_headroom(struct dpaa_buffer_layout *bl,
 	 */
 	headroom = (u16)(bl[port].priv_data_size + DPAA_HWA_SIZE);
 
-	if (port == RX)
+	if (port == RX) {
+#ifdef CONFIG_DPAA_ERRATUM_A050385
+		if (unlikely(fman_has_errata_a050385()))
+			headroom = XDP_PACKET_HEADROOM;
+#endif
+
 		return ALIGN(headroom, DPAA_FD_RX_DATA_ALIGNMENT);
-	else
+	} else {
 		return ALIGN(headroom, DPAA_FD_DATA_ALIGNMENT);
+	}
 }
 
 static int dpaa_eth_probe(struct platform_device *pdev)