[RFC,08/10] net: stmmac: dwmac-loongson: Add LS7A support

Commit Message

Feiyang Chen July 13, 2023, 2:48 a.m. UTC

Current dwmac-loongson only support LS2K in the "probed with PCI and
configured with DT" manner. We add LS7A support on which the devices
are fully PCI (non-DT).

Signed-off-by: Huacai Chen <[e-mail]>
Signed-off-by: Feiyang Chen <[e-mail]>
---
 .../ethernet/stmicro/stmmac/dwmac-loongson.c  | 135 +++++++++++-------
 1 file changed, 82 insertions(+), 53 deletions(-)

Patch

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
index a25c187d3185..dc0916f2e9b8 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c
@@ -9,14 +9,22 @@ 
 #include <linux/of_irq.h>
 #include "stmmac.h"
 
-static int loongson_default_data(struct plat_stmmacenet_data *plat)
+struct stmmac_pci_info {
+	int (*setup)(struct pci_dev *pdev, struct plat_stmmacenet_data *plat);
+};
+
+static void common_default_data(struct pci_dev *pdev,
+				struct plat_stmmacenet_data *plat)
 {
+	plat->bus_id = (pci_domain_nr(pdev->bus) << 16) | PCI_DEVID(pdev->bus->number, pdev->devfn);
+	plat->interface = PHY_INTERFACE_MODE_GMII;
+
 	plat->clk_csr = 2;	/* clk_csr_i = 20-35MHz & MDC = clk_csr_i/16 */
 	plat->has_gmac = 1;
 	plat->force_sf_dma_mode = 1;
 
 	/* Set default value for multicast hash bins */
-	plat->multicast_filter_bins = HASH_TABLE_SIZE;
+	plat->multicast_filter_bins = 256;
 
 	/* Set default value for unicast filter entries */
 	plat->unicast_filter_entries = 1;
@@ -35,31 +43,43 @@  static int loongson_default_data(struct plat_stmmacenet_data *plat)
 	/* Disable RX queues routing by default */
 	plat->rx_queues_cfg[0].pkt_route = 0x0;
 
-	/* Default to phy auto-detection */
-	plat->phy_addr = -1;
-
 	plat->dma_cfg->pbl = 32;
 	plat->dma_cfg->pblx8 = true;
 
-	plat->multicast_filter_bins = 256;
+	plat->clk_ref_rate = 125000000;
+	plat->clk_ptp_rate = 125000000;
+
+	plat->has_lgmac = 1;
+}
+
+static int loongson_gmac_data(struct pci_dev *pdev,
+			      struct plat_stmmacenet_data *plat)
+{
+	common_default_data(pdev, plat);
+
+	plat->mdio_bus_data->phy_mask = 0;
+
+	plat->phy_addr = -1;
+	plat->phy_interface = PHY_INTERFACE_MODE_RGMII_ID;
+
 	return 0;
 }
 
-static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id *id)
+static struct stmmac_pci_info loongson_gmac_pci_info = {
+	.setup = loongson_gmac_data,
+};
+
+static int loongson_dwmac_probe(struct pci_dev *pdev,
+				const struct pci_device_id *id)
 {
+	int ret, i, bus_id, phy_mode;
 	struct plat_stmmacenet_data *plat;
+	struct stmmac_pci_info *info;
 	struct stmmac_resources res;
 	struct device_node *np;
-	int ret, i, phy_mode;
 
 	np = dev_of_node(&pdev->dev);
-
-	if (!np) {
-		pr_info("dwmac_loongson_pci: No OF node\n");
-		return -ENODEV;
-	}
-
-	if (!of_device_is_compatible(np, "loongson, pci-gmac")) {
+	if (np && !of_device_is_compatible(np, "loongson, pci-gmac")) {
 		pr_info("dwmac_loongson_pci: Incompatible OF node\n");
 		return -ENODEV;
 	}
@@ -68,17 +88,14 @@  static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id
 	if (!plat)
 		return -ENOMEM;
 
+	plat->mdio_bus_data = devm_kzalloc(&pdev->dev,
+				   sizeof(*plat->mdio_bus_data), GFP_KERNEL);
+	if (!plat->mdio_bus_data)
+		return -ENOMEM;
+
 	plat->mdio_node = of_get_child_by_name(np, "mdio");
 	if (plat->mdio_node) {
 		dev_info(&pdev->dev, "Found MDIO subnode\n");
-
-		plat->mdio_bus_data = devm_kzalloc(&pdev->dev,
-						   sizeof(*plat->mdio_bus_data),
-						   GFP_KERNEL);
-		if (!plat->mdio_bus_data) {
-			ret = -ENOMEM;
-			goto err_put_node;
-		}
 		plat->mdio_bus_data->needs_reset = true;
 	}
 
@@ -105,45 +122,55 @@  static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id
 		break;
 	}
 
-	plat->bus_id = of_alias_get_id(np, "ethernet");
-	if (plat->bus_id < 0)
-		plat->bus_id = pci_dev_id(pdev);
+	pci_set_master(pdev);
 
-	phy_mode = device_get_phy_mode(&pdev->dev);
-	if (phy_mode < 0) {
-		dev_err(&pdev->dev, "phy_mode not found\n");
-		ret = phy_mode;
+	info = (struct stmmac_pci_info *)id->driver_data;
+	ret = info->setup(pdev, plat);
+	if (ret)
 		goto err_disable_device;
-	}
 
-	plat->phy_interface = phy_mode;
-	plat->interface = PHY_INTERFACE_MODE_GMII;
+	if (np) {
+		bus_id = of_alias_get_id(np, "ethernet");
+		if (bus_id >= 0)
+			plat->bus_id = bus_id;
 
-	pci_set_master(pdev);
+		phy_mode = device_get_phy_mode(&pdev->dev);
+		if (phy_mode < 0) {
+			dev_err(&pdev->dev, "phy_mode not found\n");
+			ret = phy_mode;
+			goto err_disable_device;
+		}
+		plat->phy_interface = phy_mode;
+	}
 
-	loongson_default_data(plat);
 	pci_enable_msi(pdev);
+
 	memset(&res, 0, sizeof(res));
 	res.addr = pcim_iomap_table(pdev)[0];
+	if (np) {
+		res.irq = of_irq_get_byname(np, "macirq");
+		if (res.irq < 0) {
+			dev_err(&pdev->dev, "IRQ macirq not found\n");
+			ret = -ENODEV;
+			goto err_disable_msi;
+		}
 
-	res.irq = of_irq_get_byname(np, "macirq");
-	if (res.irq < 0) {
-		dev_err(&pdev->dev, "IRQ macirq not found\n");
-		ret = -ENODEV;
-		goto err_disable_msi;
-	}
-
-	res.wol_irq = of_irq_get_byname(np, "eth_wake_irq");
-	if (res.wol_irq < 0) {
-		dev_info(&pdev->dev, "IRQ eth_wake_irq not found, using macirq\n");
-		res.wol_irq = res.irq;
-	}
+		res.wol_irq = of_irq_get_byname(np, "eth_wake_irq");
+		if (res.wol_irq < 0) {
+			dev_info(&pdev->dev,
+				 "IRQ eth_wake_irq not found, using macirq\n");
+			res.wol_irq = res.irq;
+		}
 
-	res.lpi_irq = of_irq_get_byname(np, "eth_lpi");
-	if (res.lpi_irq < 0) {
-		dev_err(&pdev->dev, "IRQ eth_lpi not found\n");
-		ret = -ENODEV;
-		goto err_disable_msi;
+		res.lpi_irq = of_irq_get_byname(np, "eth_lpi");
+		if (res.lpi_irq < 0) {
+			dev_err(&pdev->dev, "IRQ eth_lpi not found\n");
+			ret = -ENODEV;
+			goto err_disable_msi;
+		}
+	} else {
+		res.irq = pdev->irq;
+		res.wol_irq = pdev->irq;
 	}
 
 	ret = stmmac_dvr_probe(&pdev->dev, plat, &res);
@@ -219,8 +246,10 @@  static int __maybe_unused loongson_dwmac_resume(struct device *dev)
 static SIMPLE_DEV_PM_OPS(loongson_dwmac_pm_ops, loongson_dwmac_suspend,
 			 loongson_dwmac_resume);
 
+#define PCI_DEVICE_ID_LOONGSON_GMAC	0x7a03
+
 static const struct pci_device_id loongson_dwmac_id_table[] = {
-	{ PCI_VDEVICE(LOONGSON, 0x7a03) },
+	{ PCI_DEVICE_DATA(LOONGSON, GMAC, &loongson_gmac_pci_info) },
 	{}
 };
 MODULE_DEVICE_TABLE(pci, loongson_dwmac_id_table);