From patchwork Tue Aug 6 11:00:22 2024 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Yanteng Si X-Patchwork-Id: 13754660 X-Patchwork-Delegate: kuba@kernel.org Received: from mail.loongson.cn (mail.loongson.cn [114.242.206.163]) by smtp.subspace.kernel.org (Postfix) with ESMTP id DEB401C0DE9 for ; Tue, 6 Aug 2024 11:00:27 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=114.242.206.163 ARC-Seal: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1722942030; cv=none; b=YEP3Xa1GVLqdP4qnFFsjegX6oZyOXq8S9CyzLTusllp+md4en+ICyx5dpWASyMGHiuz2irInVZrEqzsJnNR8Tocf6Rct4lOQHreGelaF07mJtSQEynPx8JxKiF+Mk/rJFpM+KkAAvo1xCZt8FKaK257VDCX77A0u3LPImgP6Zo4= ARC-Message-Signature: i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1722942030; c=relaxed/simple; bh=U4TXH1BQFEFPpG/YNSia1jUCySgXTLjUduezMVljAi0=; h=From:To:Cc:Subject:Date:Message-Id:In-Reply-To:References: MIME-Version; b=lRz+w2Dfl0WmJawdaq9dv0IgLtwaI6Ru/QEbhkuJ8u7KBNIUhU3i17NmONjEc4punsVP9hbVK788dRjLgIJ+Pr0S9BX8U1VL+6ZWyFxPEsIzkQjMznzTVfbS2dWZ9Ml2Gyl6oHorcRXiqxdpemsxfvhtwfb4fkuHWXgrqQhATmg= ARC-Authentication-Results: i=1; smtp.subspace.kernel.org; dmarc=none (p=none dis=none) header.from=loongson.cn; spf=pass smtp.mailfrom=loongson.cn; arc=none smtp.client-ip=114.242.206.163 Authentication-Results: smtp.subspace.kernel.org; dmarc=none (p=none dis=none) header.from=loongson.cn Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=loongson.cn Received: from loongson.cn (unknown [223.64.68.71]) by gateway (Coremail) with SMTP id _____8DxSupKArJmZbAIAA--.28923S3; Tue, 06 Aug 2024 19:00:26 +0800 (CST) Received: from localhost.localdomain (unknown [223.64.68.71]) by front1 (Coremail) with SMTP id qMiowMAxz2dIArJmo_gFAA--.20216S2; Tue, 06 Aug 2024 19:00:25 +0800 (CST) From: Yanteng Si To: andrew@lunn.ch, hkallweit1@gmail.com, peppe.cavallaro@st.com, alexandre.torgue@foss.st.com, joabreu@synopsys.com, fancer.lancer@gmail.com, diasyzhang@tencent.com Cc: Yanteng Si , Jose.Abreu@synopsys.com, chenhuacai@kernel.org, linux@armlinux.org.uk, guyinggang@loongson.cn, netdev@vger.kernel.org, chris.chenfeiyang@gmail.com, si.yanteng@linux.dev, Huacai Chen Subject: [PATCH net-next v16 12/14] net: stmmac: dwmac-loongson: Add Loongson Multi-channels GMAC support Date: Tue, 6 Aug 2024 19:00:22 +0800 Message-Id: X-Mailer: git-send-email 2.31.4 In-Reply-To: References: Precedence: bulk X-Mailing-List: netdev@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 X-CM-TRANSID: qMiowMAxz2dIArJmo_gFAA--.20216S2 X-CM-SenderInfo: pvl1t0pwhqwqxorr0wxvrqhubq/ X-Coremail-Antispam: 1Uk129KBj9fXoW3Cr1DCF1kKrW5JrykJr4DZFc_yoW8Wry3Wo ZxXFnavrWrKw18Wrs7Krn5JFWUXr1rXws0yFWfCr4DX39ava15ZFWfGa1fJ3WSyr1rKF9x AryfJ3WkGFWSqwn5l-sFpf9Il3svdjkaLaAFLSUrUUUU5b8apTn2vfkv8UJUUUU8wcxFpf 9Il3svdxBIdaVrn0xqx4xG64xvF2IEw4CE5I8CrVC2j2Jv73VFW2AGmfu7bjvjm3AaLaJ3 UjIYCTnIWjp_UUUOI7kC6x804xWl14x267AKxVWUJVW8JwAFc2x0x2IEx4CE42xK8VAvwI 8IcIk0rVWrJVCq3wAFIxvE14AKwVWUXVWUAwA2ocxC64kIII0Yj41l84x0c7CEw4AK67xG Y2AK021l84ACjcxK6xIIjxv20xvE14v26w1j6s0DM28EF7xvwVC0I7IYx2IY6xkF7I0E14 v26r4UJVWxJr1l84ACjcxK6I8E87Iv67AKxVW8Jr0_Cr1UM28EF7xvwVC2z280aVCY1x02 67AKxVW8Jr0_Cr1UM2kKe7AKxVWUAVWUtwAS0I0E0xvYzxvE52x082IY62kv0487Mc804V CY07AIYIkI8VC2zVCFFI0UMc02F40EFcxC0VAKzVAqx4xG6I80ewAv7VC0I7IYx2IY67AK xVW8Xw0E3s1lYx0Ex4A2jsIE14v26r4UJVWxJr1lOx8S6xCaFVCjc4AY6r1j6r4UM4x0Y4 8IcxkI7VAKI48JM4x0Y40E4IxF1VCIxcxG6Fyj6r4UJwCY1x0262kKe7AKxVWUtVW8ZwCF 04k20xvY0x0EwIxGrwCFx2IqxVCFs4IE7xkEbVWUJVW8JwCFI7km07C267AKxVWUAVWUtw C20s026c02F40E14v26r1j6r18MI8I3I0E7480Y4vE14v26r106r1rMI8E67AF67kF1VAF wI0_GFv_WrylIxkGc2Ij64vIr41lIxAIcVC0I7IYx2IY67AKxVWDJVCq3wCI42IY6xIIjx v20xvEc7CjxVAFwI0_Gr1j6F4UJwCI42IY6xAIw20EY4v20xvaj40_Jr0_JF4lIxAIcVC2 z280aVAFwI0_Gr1j6F4UJwCI42IY6I8E87Iv6xkF7I0E14v26r4UJVWxJrUvcSsGvfC2Kf nxnUUI43ZEXa7IUYhtxDUUUUU== X-Patchwork-Delegate: kuba@kernel.org The Loongson DWMAC driver currently supports the Loongson GMAC devices (based on the DW GMAC v3.50a/v3.73a IP-core) installed to the LS2K1000 SoC and LS7A1000 chipset. But recently a new generation LS2K2000 SoC was released with the new version of the Loongson GMAC synthesized in. The new controller is based on the DW GMAC v3.73a IP-core with the AV-feature enabled, which implies the multi DMA-channels support. The multi DMA-channels feature has the next vendor-specific peculiarities: 1. Split up Tx and Rx DMA IRQ status/mask bits: Name Tx Rx DMA_INTR_ENA_NIE = 0x00040000 | 0x00020000; DMA_INTR_ENA_AIE = 0x00010000 | 0x00008000; DMA_STATUS_NIS = 0x00040000 | 0x00020000; DMA_STATUS_AIS = 0x00010000 | 0x00008000; DMA_STATUS_FBI = 0x00002000 | 0x00001000; 2. Custom Synopsys ID hardwired into the GMAC_VERSION.SNPSVER register field. It's 0x10 while it should have been 0x37 in accordance with the actual DW GMAC IP-core version. 3. There are eight DMA-channels available meanwhile the Synopsys DW GMAC IP-core supports up to three DMA-channels. 4. It's possible to have each DMA-channel IRQ independently delivered. The MSI IRQs must be utilized for that. Thus in order to have the multi-channels Loongson GMAC controllers supported let's modify the Loongson DWMAC driver in accordance with all the peculiarities described above: 1. Create the multi-channels Loongson GMAC-specific stmmac_dma_ops::dma_interrupt() stmmac_dma_ops::init_chan() callbacks due to the non-standard DMA IRQ CSR flags layout. 2. Create the Loongson DWMAC-specific platform setup() method which gets to initialize the DMA-ops with the dwmac1000_dma_ops instance and overrides the callbacks described in 1. The method also overrides the custom Synopsys ID with the real one in order to have the rest of the HW-specific callbacks correctly detected by the driver core. 3. Make sure the platform setup() method enables the flow control and duplex modes supported by the controller. Signed-off-by: Feiyang Chen Signed-off-by: Yinggang Gu Acked-by: Huacai Chen Signed-off-by: Yanteng Si --- drivers/net/ethernet/stmicro/stmmac/common.h | 1 + .../ethernet/stmicro/stmmac/dwmac-loongson.c | 325 +++++++++++++++++- 2 files changed, 324 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/common.h b/drivers/net/ethernet/stmicro/stmmac/common.h index cd36ff4da68c..684489156dce 100644 --- a/drivers/net/ethernet/stmicro/stmmac/common.h +++ b/drivers/net/ethernet/stmicro/stmmac/common.h @@ -29,6 +29,7 @@ /* Synopsys Core versions */ #define DWMAC_CORE_3_40 0x34 #define DWMAC_CORE_3_50 0x35 +#define DWMAC_CORE_3_70 0x37 #define DWMAC_CORE_4_00 0x40 #define DWMAC_CORE_4_10 0x41 #define DWMAC_CORE_5_00 0x50 diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c index 6ba4674bc076..8417f2a67054 100644 --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-loongson.c @@ -8,8 +8,69 @@ #include #include #include "stmmac.h" +#include "dwmac_dma.h" +#include "dwmac1000.h" + +/* Normal Loongson Tx Summary */ +#define DMA_INTR_ENA_NIE_TX_LOONGSON 0x00040000 +/* Normal Loongson Rx Summary */ +#define DMA_INTR_ENA_NIE_RX_LOONGSON 0x00020000 + +#define DMA_INTR_NORMAL_LOONGSON (DMA_INTR_ENA_NIE_TX_LOONGSON | \ + DMA_INTR_ENA_NIE_RX_LOONGSON | \ + DMA_INTR_ENA_RIE | DMA_INTR_ENA_TIE) + +/* Abnormal Loongson Tx Summary */ +#define DMA_INTR_ENA_AIE_TX_LOONGSON 0x00010000 +/* Abnormal Loongson Rx Summary */ +#define DMA_INTR_ENA_AIE_RX_LOONGSON 0x00008000 + +#define DMA_INTR_ABNORMAL_LOONGSON (DMA_INTR_ENA_AIE_TX_LOONGSON | \ + DMA_INTR_ENA_AIE_RX_LOONGSON | \ + DMA_INTR_ENA_FBE | DMA_INTR_ENA_UNE) + +#define DMA_INTR_DEFAULT_MASK_LOONGSON (DMA_INTR_NORMAL_LOONGSON | \ + DMA_INTR_ABNORMAL_LOONGSON) + +/* Normal Loongson Tx Interrupt Summary */ +#define DMA_STATUS_NIS_TX_LOONGSON 0x00040000 +/* Normal Loongson Rx Interrupt Summary */ +#define DMA_STATUS_NIS_RX_LOONGSON 0x00020000 + +/* Abnormal Loongson Tx Interrupt Summary */ +#define DMA_STATUS_AIS_TX_LOONGSON 0x00010000 +/* Abnormal Loongson Rx Interrupt Summary */ +#define DMA_STATUS_AIS_RX_LOONGSON 0x00008000 + +/* Fatal Loongson Tx Bus Error Interrupt */ +#define DMA_STATUS_FBI_TX_LOONGSON 0x00002000 +/* Fatal Loongson Rx Bus Error Interrupt */ +#define DMA_STATUS_FBI_RX_LOONGSON 0x00001000 + +#define DMA_STATUS_MSK_COMMON_LOONGSON (DMA_STATUS_NIS_TX_LOONGSON | \ + DMA_STATUS_NIS_RX_LOONGSON | \ + DMA_STATUS_AIS_TX_LOONGSON | \ + DMA_STATUS_AIS_RX_LOONGSON | \ + DMA_STATUS_FBI_TX_LOONGSON | \ + DMA_STATUS_FBI_RX_LOONGSON) + +#define DMA_STATUS_MSK_RX_LOONGSON (DMA_STATUS_ERI | DMA_STATUS_RWT | \ + DMA_STATUS_RPS | DMA_STATUS_RU | \ + DMA_STATUS_RI | DMA_STATUS_OVF | \ + DMA_STATUS_MSK_COMMON_LOONGSON) + +#define DMA_STATUS_MSK_TX_LOONGSON (DMA_STATUS_ETI | DMA_STATUS_UNF | \ + DMA_STATUS_TJT | DMA_STATUS_TU | \ + DMA_STATUS_TPS | DMA_STATUS_TI | \ + DMA_STATUS_MSK_COMMON_LOONGSON) #define PCI_DEVICE_ID_LOONGSON_GMAC 0x7a03 +#define DWMAC_CORE_LS_MULTICHAN 0x10 /* Loongson custom ID */ +#define CHANNEL_NUM 8 + +struct loongson_data { + u32 loongson_id; +}; struct stmmac_pci_info { int (*setup)(struct pci_dev *pdev, struct plat_stmmacenet_data *plat); @@ -56,10 +117,26 @@ static void loongson_default_data(struct pci_dev *pdev, static int loongson_gmac_data(struct pci_dev *pdev, struct plat_stmmacenet_data *plat) { + struct loongson_data *ld; + int i; + + ld = plat->bsp_priv; + loongson_default_data(pdev, plat); - plat->tx_queues_to_use = 1; - plat->rx_queues_to_use = 1; + if (ld->loongson_id == DWMAC_CORE_LS_MULTICHAN) { + plat->rx_queues_to_use = CHANNEL_NUM; + plat->tx_queues_to_use = CHANNEL_NUM; + + /* Only channel 0 supports checksum, + * so turn off checksum to enable multiple channels. + */ + for (i = 1; i < CHANNEL_NUM; i++) + plat->tx_queues_cfg[i].coe_unsupported = 1; + } else { + plat->tx_queues_to_use = 1; + plat->rx_queues_to_use = 1; + } plat->phy_interface = PHY_INTERFACE_MODE_RGMII_ID; @@ -70,6 +147,233 @@ static struct stmmac_pci_info loongson_gmac_pci_info = { .setup = loongson_gmac_data, }; +static void loongson_dwmac_dma_init_channel(struct stmmac_priv *priv, + void __iomem *ioaddr, + struct stmmac_dma_cfg *dma_cfg, + u32 chan) +{ + int txpbl = dma_cfg->txpbl ?: dma_cfg->pbl; + int rxpbl = dma_cfg->rxpbl ?: dma_cfg->pbl; + u32 value; + + value = readl(ioaddr + DMA_CHAN_BUS_MODE(chan)); + + if (dma_cfg->pblx8) + value |= DMA_BUS_MODE_MAXPBL; + + value |= DMA_BUS_MODE_USP; + value &= ~(DMA_BUS_MODE_PBL_MASK | DMA_BUS_MODE_RPBL_MASK); + value |= (txpbl << DMA_BUS_MODE_PBL_SHIFT); + value |= (rxpbl << DMA_BUS_MODE_RPBL_SHIFT); + + /* Set the Fixed burst mode */ + if (dma_cfg->fixed_burst) + value |= DMA_BUS_MODE_FB; + + /* Mixed Burst has no effect when fb is set */ + if (dma_cfg->mixed_burst) + value |= DMA_BUS_MODE_MB; + + if (dma_cfg->atds) + value |= DMA_BUS_MODE_ATDS; + + if (dma_cfg->aal) + value |= DMA_BUS_MODE_AAL; + + writel(value, ioaddr + DMA_CHAN_BUS_MODE(chan)); + + /* Mask interrupts by writing to CSR7 */ + writel(DMA_INTR_DEFAULT_MASK_LOONGSON, ioaddr + + DMA_CHAN_INTR_ENA(chan)); +} + +static int loongson_dwmac_dma_interrupt(struct stmmac_priv *priv, + void __iomem *ioaddr, + struct stmmac_extra_stats *x, + u32 chan, u32 dir) +{ + struct stmmac_pcpu_stats *stats = this_cpu_ptr(priv->xstats.pcpu_stats); + u32 abnor_intr_status; + u32 nor_intr_status; + u32 fb_intr_status; + u32 intr_status; + int ret = 0; + + /* read the status register (CSR5) */ + intr_status = readl(ioaddr + DMA_CHAN_STATUS(chan)); + + if (dir == DMA_DIR_RX) + intr_status &= DMA_STATUS_MSK_RX_LOONGSON; + else if (dir == DMA_DIR_TX) + intr_status &= DMA_STATUS_MSK_TX_LOONGSON; + + nor_intr_status = intr_status & (DMA_STATUS_NIS_TX_LOONGSON | + DMA_STATUS_NIS_RX_LOONGSON); + abnor_intr_status = intr_status & (DMA_STATUS_AIS_TX_LOONGSON | + DMA_STATUS_AIS_RX_LOONGSON); + fb_intr_status = intr_status & (DMA_STATUS_FBI_TX_LOONGSON | + DMA_STATUS_FBI_RX_LOONGSON); + + /* ABNORMAL interrupts */ + if (unlikely(abnor_intr_status)) { + if (unlikely(intr_status & DMA_STATUS_UNF)) { + ret = tx_hard_error_bump_tc; + x->tx_undeflow_irq++; + } + if (unlikely(intr_status & DMA_STATUS_TJT)) + x->tx_jabber_irq++; + if (unlikely(intr_status & DMA_STATUS_OVF)) + x->rx_overflow_irq++; + if (unlikely(intr_status & DMA_STATUS_RU)) + x->rx_buf_unav_irq++; + if (unlikely(intr_status & DMA_STATUS_RPS)) + x->rx_process_stopped_irq++; + if (unlikely(intr_status & DMA_STATUS_RWT)) + x->rx_watchdog_irq++; + if (unlikely(intr_status & DMA_STATUS_ETI)) + x->tx_early_irq++; + if (unlikely(intr_status & DMA_STATUS_TPS)) { + x->tx_process_stopped_irq++; + ret = tx_hard_error; + } + if (unlikely(fb_intr_status)) { + x->fatal_bus_error_irq++; + ret = tx_hard_error; + } + } + /* TX/RX NORMAL interrupts */ + if (likely(nor_intr_status)) { + if (likely(intr_status & DMA_STATUS_RI)) { + u32 value = readl(ioaddr + DMA_INTR_ENA); + /* to schedule NAPI on real RIE event. */ + if (likely(value & DMA_INTR_ENA_RIE)) { + u64_stats_update_begin(&stats->syncp); + u64_stats_inc(&stats->rx_normal_irq_n[chan]); + u64_stats_update_end(&stats->syncp); + ret |= handle_rx; + } + } + if (likely(intr_status & DMA_STATUS_TI)) { + u64_stats_update_begin(&stats->syncp); + u64_stats_inc(&stats->tx_normal_irq_n[chan]); + u64_stats_update_end(&stats->syncp); + ret |= handle_tx; + } + if (unlikely(intr_status & DMA_STATUS_ERI)) + x->rx_early_irq++; + } + /* Optional hardware blocks, interrupts should be disabled */ + if (unlikely(intr_status & + (DMA_STATUS_GPI | DMA_STATUS_GMI | DMA_STATUS_GLI))) + pr_warn("%s: unexpected status %08x\n", __func__, intr_status); + + /* Clear the interrupt by writing a logic 1 to the CSR5[19-0] */ + writel((intr_status & 0x7ffff), ioaddr + DMA_CHAN_STATUS(chan)); + + return ret; +} + +static struct mac_device_info *loongson_dwmac_setup(void *apriv) +{ + struct stmmac_priv *priv = apriv; + struct mac_device_info *mac; + struct stmmac_dma_ops *dma; + struct loongson_data *ld; + + ld = priv->plat->bsp_priv; + + mac = devm_kzalloc(priv->device, sizeof(*mac), GFP_KERNEL); + if (!mac) + return NULL; + + dma = devm_kzalloc(priv->device, sizeof(*dma), GFP_KERNEL); + if (!dma) + return NULL; + + /* The Loongson GMAC devices are based on the DW GMAC + * v3.50a and v3.73a IP-cores. But the HW designers have changed the + * GMAC_VERSION.SNPSVER field to the custom 0x10 value on the + * network controllers with the multi-channels feature + * available to emphasize the differences: multiple DMA-channels, + * AV feature and GMAC_INT_STATUS CSR flags layout. Get back the + * original value so the correct HW-interface would be selected. + */ + if (ld->loongson_id == DWMAC_CORE_LS_MULTICHAN) { + priv->synopsys_id = DWMAC_CORE_3_70; + *dma = dwmac1000_dma_ops; + dma->init_chan = loongson_dwmac_dma_init_channel; + dma->dma_interrupt = loongson_dwmac_dma_interrupt; + mac->dma = dma; + } + + priv->dev->priv_flags |= IFF_UNICAST_FLT; + + /* Pre-initialize the respective "mac" fields as it's done in + * dwmac1000_setup() + */ + mac->pcsr = priv->ioaddr; + mac->multicast_filter_bins = priv->plat->multicast_filter_bins; + mac->unicast_filter_entries = priv->plat->unicast_filter_entries; + mac->mcast_bits_log2 = 0; + + if (mac->multicast_filter_bins) + mac->mcast_bits_log2 = ilog2(mac->multicast_filter_bins); + + /* Loongson GMAC doesn't support the flow control. */ + mac->link.caps = MAC_10 | MAC_100 | MAC_1000; + + mac->link.duplex = GMAC_CONTROL_DM; + mac->link.speed10 = GMAC_CONTROL_PS; + mac->link.speed100 = GMAC_CONTROL_PS | GMAC_CONTROL_FES; + mac->link.speed1000 = 0; + mac->link.speed_mask = GMAC_CONTROL_PS | GMAC_CONTROL_FES; + mac->mii.addr = GMAC_MII_ADDR; + mac->mii.data = GMAC_MII_DATA; + mac->mii.addr_shift = 11; + mac->mii.addr_mask = 0x0000F800; + mac->mii.reg_shift = 6; + mac->mii.reg_mask = 0x000007C0; + mac->mii.clk_csr_shift = 2; + mac->mii.clk_csr_mask = GENMASK(5, 2); + + return mac; +} + +static int loongson_dwmac_msi_config(struct pci_dev *pdev, + struct plat_stmmacenet_data *plat, + struct stmmac_resources *res) +{ + int i, ret, vecs; + + vecs = roundup_pow_of_two(CHANNEL_NUM * 2 + 1); + ret = pci_alloc_irq_vectors(pdev, vecs, vecs, PCI_IRQ_MSI); + if (ret < 0) { + dev_warn(&pdev->dev, "Failed to allocate MSI IRQs\n"); + return ret; + } + + res->irq = pci_irq_vector(pdev, 0); + + for (i = 0; i < plat->rx_queues_to_use; i++) { + res->rx_irq[CHANNEL_NUM - 1 - i] = + pci_irq_vector(pdev, 1 + i * 2); + } + + for (i = 0; i < plat->tx_queues_to_use; i++) { + res->tx_irq[CHANNEL_NUM - 1 - i] = + pci_irq_vector(pdev, 2 + i * 2); + } + + plat->flags |= STMMAC_FLAG_MULTI_MSI_EN; + + return 0; +} + +static void loongson_dwmac_msi_clear(struct pci_dev *pdev) +{ + pci_free_irq_vectors(pdev); +} + static int loongson_dwmac_dt_config(struct pci_dev *pdev, struct plat_stmmacenet_data *plat, struct stmmac_resources *res) @@ -146,6 +450,7 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id struct plat_stmmacenet_data *plat; struct stmmac_pci_info *info; struct stmmac_resources res; + struct loongson_data *ld; int ret, i; plat = devm_kzalloc(&pdev->dev, sizeof(*plat), GFP_KERNEL); @@ -162,6 +467,10 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id if (!plat->dma_cfg) return -ENOMEM; + ld = devm_kzalloc(&pdev->dev, sizeof(*ld), GFP_KERNEL); + if (!ld) + return -ENOMEM; + /* Enable pci device */ ret = pci_enable_device(pdev); if (ret) { @@ -184,6 +493,10 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id memset(&res, 0, sizeof(res)); res.addr = pcim_iomap_table(pdev)[0]; + plat->bsp_priv = ld; + plat->setup = loongson_dwmac_setup; + ld->loongson_id = readl(res.addr + GMAC_VERSION) & 0xff; + info = (struct stmmac_pci_info *)id->driver_data; ret = info->setup(pdev, plat); if (ret) @@ -196,6 +509,10 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id if (ret) goto err_disable_device; + /* Use the common MAC IRQ if per-channel MSIs allocation failed */ + if (ld->loongson_id == DWMAC_CORE_LS_MULTICHAN) + loongson_dwmac_msi_config(pdev, plat, &res); + ret = stmmac_dvr_probe(&pdev->dev, plat, &res); if (ret) goto err_plat_clear; @@ -205,6 +522,7 @@ static int loongson_dwmac_probe(struct pci_dev *pdev, const struct pci_device_id err_plat_clear: if (dev_of_node(&pdev->dev)) loongson_dwmac_dt_clear(pdev, plat); + loongson_dwmac_msi_clear(pdev); err_disable_device: pci_disable_device(pdev); return ret; @@ -214,12 +532,15 @@ static void loongson_dwmac_remove(struct pci_dev *pdev) { struct net_device *ndev = dev_get_drvdata(&pdev->dev); struct stmmac_priv *priv = netdev_priv(ndev); + struct loongson_data *ld; int i; + ld = priv->plat->bsp_priv; stmmac_dvr_remove(&pdev->dev); if (dev_of_node(&pdev->dev)) loongson_dwmac_dt_clear(pdev, priv->plat); + loongson_dwmac_msi_clear(pdev); for (i = 0; i < PCI_STD_NUM_BARS; i++) { if (pci_resource_len(pdev, i) == 0)