diff mbox series

[NET,v4,1/1] ipv6: allocate enough headroom in ip6_finish_output2()

Message ID dc51dab2-8434-9f88-d6cd-4e6754383413@virtuozzo.com (mailing list archive)
State Not Applicable
Delegated to: Netdev Maintainers
Headers show
Series ipv6: allocate enough headroom in ip6_finish_output2() | expand

Checks

Context Check Description
netdev/cover_letter success Link
netdev/fixes_present success Link
netdev/patch_count success Link
netdev/tree_selection success Guessed tree name to be net-next
netdev/subject_prefix warning Target tree name not specified in the subject
netdev/cc_maintainers success CCed 5 of 5 maintainers
netdev/source_inline success Was 0 now: 0
netdev/verify_signedoff success Link
netdev/module_param success Was 0 now: 0
netdev/build_32bit success Errors and warnings before: 0 this patch: 0
netdev/kdoc success Errors and warnings before: 0 this patch: 0
netdev/verify_fixes success Link
netdev/checkpatch warning WARNING: line length of 82 exceeds 80 columns WARNING: line length of 87 exceeds 80 columns
netdev/build_allmodconfig_warn success Errors and warnings before: 0 this patch: 0
netdev/header_inline success Link

Commit Message

Vasily Averin July 13, 2021, 12:01 p.m. UTC
When TEE target mirrors traffic to another interface, sk_buff may
not have enough headroom to be processed correctly.
ip_finish_output2() detect this situation for ipv4 and allocates
new skb with enogh headroom. However ipv6 lacks this logic in
ip_finish_output2 and it leads to skb_under_panic:

 skbuff: skb_under_panic: text:ffffffffc0866ad4 len:96 put:24
 head:ffff97be85e31800 data:ffff97be85e317f8 tail:0x58 end:0xc0 dev:gre0
 ------------[ cut here ]------------
 kernel BUG at net/core/skbuff.c:110!
 invalid opcode: 0000 [#1] SMP PTI
 CPU: 2 PID: 393 Comm: kworker/2:2 Tainted: G           OE     5.13.0 #13
 Hardware name: Virtuozzo KVM, BIOS 1.11.0-2.vz7.4 04/01/2014
 Workqueue: ipv6_addrconf addrconf_dad_work
 RIP: 0010:skb_panic+0x48/0x4a
 Call Trace:
  skb_push.cold.111+0x10/0x10
  ipgre_header+0x24/0xf0 [ip_gre]
  neigh_connected_output+0xae/0xf0
  ip6_finish_output2+0x1a8/0x5a0
  ip6_output+0x5c/0x110
  nf_dup_ipv6+0x158/0x1000 [nf_dup_ipv6]
  tee_tg6+0x2e/0x40 [xt_TEE]
  ip6t_do_table+0x294/0x470 [ip6_tables]
  nf_hook_slow+0x44/0xc0
  nf_hook.constprop.34+0x72/0xe0
  ndisc_send_skb+0x20d/0x2e0
  ndisc_send_ns+0xd1/0x210
  addrconf_dad_work+0x3c8/0x540
  process_one_work+0x1d1/0x370
  worker_thread+0x30/0x390
  kthread+0x116/0x130
  ret_from_fork+0x22/0x30

Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
---
 net/ipv6/ip6_output.c | 28 ++++++++++++++++++++++++++++
 1 file changed, 28 insertions(+)

Comments

Vasily Averin July 18, 2021, 10:44 a.m. UTC | #1
Dear David,
I've found that you have added v3 version of this patch into netdev-net git.
This version had one mistake: skb_set_owner_w() should set sk not to old skb byt to new nskb.
I've fixed it in v4 version.

Could you please drop bad v3 version and pick up fixed one ?
Should I perhaps submit separate fixup instead?

Thank you,
	Vasily Averin

On 7/13/21 3:01 PM, Vasily Averin wrote:
> When TEE target mirrors traffic to another interface, sk_buff may
> not have enough headroom to be processed correctly.
> ip_finish_output2() detect this situation for ipv4 and allocates
> new skb with enogh headroom. However ipv6 lacks this logic in
> ip_finish_output2 and it leads to skb_under_panic:
> 
>  skbuff: skb_under_panic: text:ffffffffc0866ad4 len:96 put:24
>  head:ffff97be85e31800 data:ffff97be85e317f8 tail:0x58 end:0xc0 dev:gre0
>  ------------[ cut here ]------------
>  kernel BUG at net/core/skbuff.c:110!
>  invalid opcode: 0000 [#1] SMP PTI
>  CPU: 2 PID: 393 Comm: kworker/2:2 Tainted: G           OE     5.13.0 #13
>  Hardware name: Virtuozzo KVM, BIOS 1.11.0-2.vz7.4 04/01/2014
>  Workqueue: ipv6_addrconf addrconf_dad_work
>  RIP: 0010:skb_panic+0x48/0x4a
>  Call Trace:
>   skb_push.cold.111+0x10/0x10
>   ipgre_header+0x24/0xf0 [ip_gre]
>   neigh_connected_output+0xae/0xf0
>   ip6_finish_output2+0x1a8/0x5a0
>   ip6_output+0x5c/0x110
>   nf_dup_ipv6+0x158/0x1000 [nf_dup_ipv6]
>   tee_tg6+0x2e/0x40 [xt_TEE]
>   ip6t_do_table+0x294/0x470 [ip6_tables]
>   nf_hook_slow+0x44/0xc0
>   nf_hook.constprop.34+0x72/0xe0
>   ndisc_send_skb+0x20d/0x2e0
>   ndisc_send_ns+0xd1/0x210
>   addrconf_dad_work+0x3c8/0x540
>   process_one_work+0x1d1/0x370
>   worker_thread+0x30/0x390
>   kthread+0x116/0x130
>   ret_from_fork+0x22/0x30
> 
> Signed-off-by: Vasily Averin <vvs@virtuozzo.com>
> ---
>  net/ipv6/ip6_output.c | 28 ++++++++++++++++++++++++++++
>  1 file changed, 28 insertions(+)
> 
> diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c
> index ff4f9eb..25144c7 100644
> --- a/net/ipv6/ip6_output.c
> +++ b/net/ipv6/ip6_output.c
> @@ -60,10 +60,38 @@ static int ip6_finish_output2(struct net *net, struct sock *sk, struct sk_buff *
>  {
>  	struct dst_entry *dst = skb_dst(skb);
>  	struct net_device *dev = dst->dev;
> +	unsigned int hh_len = LL_RESERVED_SPACE(dev);
> +	int delta = hh_len - skb_headroom(skb);
>  	const struct in6_addr *nexthop;
>  	struct neighbour *neigh;
>  	int ret;
>  
> +	/* Be paranoid, rather than too clever. */
> +	if (unlikely(delta > 0) && dev->header_ops) {
> +		/* pskb_expand_head() might crash, if skb is shared */
> +		if (skb_shared(skb)) {
> +			struct sk_buff *nskb = skb_clone(skb, GFP_ATOMIC);
> +
> +			if (likely(nskb)) {
> +				if (skb->sk)
> +					skb_set_owner_w(nskb, skb->sk);
> +				consume_skb(skb);
> +			} else {
> +				kfree_skb(skb);
> +			}
> +			skb = nskb;
> +		}
> +		if (skb &&
> +		    pskb_expand_head(skb, SKB_DATA_ALIGN(delta), 0, GFP_ATOMIC)) {
> +			kfree_skb(skb);
> +			skb = NULL;
> +		}
> +		if (!skb) {
> +			IP6_INC_STATS(net, ip6_dst_idev(dst), IPSTATS_MIB_OUTDISCARDS);
> +			return -ENOMEM;
> +		}
> +	}
> +
>  	if (ipv6_addr_is_multicast(&ipv6_hdr(skb)->daddr)) {
>  		struct inet6_dev *idev = ip6_dst_idev(skb_dst(skb));
>  
>
David Ahern July 18, 2021, 3:22 p.m. UTC | #2
On 7/18/21 4:44 AM, Vasily Averin wrote:
> I've found that you have added v3 version of this patch into netdev-net git.
> This version had one mistake: skb_set_owner_w() should set sk not to old skb byt to new nskb.
> I've fixed it in v4 version.
> 
> Could you please drop bad v3 version and pick up fixed one ?
> Should I perhaps submit separate fixup instead?

Patches are not dropped once pushed; send the diff between v3 and v4
with a Fixes tag.
David Miller July 18, 2021, 5:04 p.m. UTC | #3
From: Vasily Averin <vvs@virtuozzo.com>
Date: Sun, 18 Jul 2021 13:44:33 +0300

> Dear David,
> I've found that you have added v3 version of this patch into netdev-net git.
> This version had one mistake: skb_set_owner_w() should set sk not to old skb byt to new nskb.
> I've fixed it in v4 version.
> 
> Could you please drop bad v3 version and pick up fixed one ?
> Should I perhaps submit separate fixup instead?

Always submit a fixup in these situations..

Thank you.
diff mbox series

Patch

diff --git a/net/ipv6/ip6_output.c b/net/ipv6/ip6_output.c
index ff4f9eb..25144c7 100644
--- a/net/ipv6/ip6_output.c
+++ b/net/ipv6/ip6_output.c
@@ -60,10 +60,38 @@  static int ip6_finish_output2(struct net *net, struct sock *sk, struct sk_buff *
 {
 	struct dst_entry *dst = skb_dst(skb);
 	struct net_device *dev = dst->dev;
+	unsigned int hh_len = LL_RESERVED_SPACE(dev);
+	int delta = hh_len - skb_headroom(skb);
 	const struct in6_addr *nexthop;
 	struct neighbour *neigh;
 	int ret;
 
+	/* Be paranoid, rather than too clever. */
+	if (unlikely(delta > 0) && dev->header_ops) {
+		/* pskb_expand_head() might crash, if skb is shared */
+		if (skb_shared(skb)) {
+			struct sk_buff *nskb = skb_clone(skb, GFP_ATOMIC);
+
+			if (likely(nskb)) {
+				if (skb->sk)
+					skb_set_owner_w(nskb, skb->sk);
+				consume_skb(skb);
+			} else {
+				kfree_skb(skb);
+			}
+			skb = nskb;
+		}
+		if (skb &&
+		    pskb_expand_head(skb, SKB_DATA_ALIGN(delta), 0, GFP_ATOMIC)) {
+			kfree_skb(skb);
+			skb = NULL;
+		}
+		if (!skb) {
+			IP6_INC_STATS(net, ip6_dst_idev(dst), IPSTATS_MIB_OUTDISCARDS);
+			return -ENOMEM;
+		}
+	}
+
 	if (ipv6_addr_is_multicast(&ipv6_hdr(skb)->daddr)) {
 		struct inet6_dev *idev = ip6_dst_idev(skb_dst(skb));