@@ -706,6 +706,22 @@ int genphy_c45_write_eee_adv(struct phy_device *phydev, unsigned long *adv)
changed = 1;
}
+ if (linkmode_intersects(phydev->supported_eee, PHY_EEE_CAP2_FEATURES)) {
+ val = linkmode_to_mii_eee_cap2_t(adv);
+
+ /* IEEE 802.3-2022 45.2.7.16 EEE advertisement 2
+ * (Register 7.62)
+ */
+ val = phy_modify_mmd_changed(phydev, MDIO_MMD_AN,
+ MDIO_AN_EEE_ADV2,
+ MDIO_EEE_2_5GT | MDIO_EEE_5GT,
+ val);
+ if (val < 0)
+ return val;
+ if (val > 0)
+ changed = 1;
+ }
+
if (linkmode_test_bit(ETHTOOL_LINK_MODE_10baseT1L_Full_BIT,
phydev->supported_eee)) {
val = linkmode_adv_to_mii_10base_t1_t(adv);
@@ -745,6 +761,17 @@ int genphy_c45_read_eee_adv(struct phy_device *phydev, unsigned long *adv)
mii_eee_cap1_mod_linkmode_t(adv, val);
}
+ if (linkmode_intersects(phydev->supported_eee, PHY_EEE_CAP2_FEATURES)) {
+ /* IEEE 802.3-2022 45.2.7.16 EEE advertisement 2
+ * (Register 7.62)
+ */
+ val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV2);
+ if (val < 0)
+ return val;
+
+ mii_eee_cap2_mod_linkmode_adv_t(adv, val);
+ }
+
if (linkmode_test_bit(ETHTOOL_LINK_MODE_10baseT1L_Full_BIT,
phydev->supported_eee)) {
/* IEEE 802.3cg-2019 45.2.7.25 10BASE-T1 AN control register
Add support for handling the EEE advertisement 2 register. For now only 2500baseT and 5000baseT modes are supported. Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com> --- drivers/net/phy/phy-c45.c | 27 +++++++++++++++++++++++++++ 1 file changed, 27 insertions(+)