| Message ID | 20181113045810.8384-1-junxiao.bi@oracle.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | ocfs2: don't clear bh uptodate for sync read | expand |
Hi Junxiao, Do we have the same problem in ocfs2_read_blocks()? Thanks, Changwei On 2018/11/13 13:00, Junxiao Bi wrote: > For sync io read in ocfs2_read_blocks_sync(), first clear bh uptodate flag > and submit the io, second wait io done, last check whether bh uptodate, > if not return io error. > > If two sync io for the same bh were issued, it could be the first io done > and set uptodate flag, but just before check that flag, the second io came > in and cleared uptodate, then ocfs2_read_blocks_sync() for the first io > will return IO error. > > Indeed it's not necessary to clear uptodate flag, as the io end handler > end_buffer_read_sync() will set or clear it based on io succeed or failed. > > The following message was found from a nfs server but the underlying > storage returned no error. > > [4106438.567376] (nfsd,7146,3):ocfs2_get_suballoc_slot_bit:2780 ERROR: read block 1238823695 failed -5 > [4106438.567569] (nfsd,7146,3):ocfs2_get_suballoc_slot_bit:2812 ERROR: status = -5 > [4106438.567611] (nfsd,7146,3):ocfs2_test_inode_bit:2894 ERROR: get alloc slot and bit failed -5 > [4106438.567643] (nfsd,7146,3):ocfs2_test_inode_bit:2932 ERROR: status = -5 > [4106438.567675] (nfsd,7146,3):ocfs2_get_dentry:94 ERROR: test inode bit failed -5 > > Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> > --- > fs/ocfs2/buffer_head_io.c | 1 - > 1 file changed, 1 deletion(-) > > diff --git a/fs/ocfs2/buffer_head_io.c b/fs/ocfs2/buffer_head_io.c > index 4ebbd57cbf84..45ee47a3c91b 100644 > --- a/fs/ocfs2/buffer_head_io.c > +++ b/fs/ocfs2/buffer_head_io.c > @@ -161,7 +161,6 @@ int ocfs2_read_blocks_sync(struct ocfs2_super *osb, u64 block, > #endif > } > > - clear_buffer_uptodate(bh); > get_bh(bh); /* for end_buffer_read_sync() */ > bh->b_end_io = end_buffer_read_sync; > submit_bh(REQ_OP_READ, 0, bh); >
Hi Junxiao, On 2018/11/12 20:58, Junxiao Bi wrote: > For sync io read in ocfs2_read_blocks_sync(), first clear bh uptodate flag > and submit the io, second wait io done, last check whether bh uptodate, > if not return io error. > > If two sync io for the same bh were issued, it could be the first io done > and set uptodate flag, but just before check that flag, the second io came > in and cleared uptodate, then ocfs2_read_blocks_sync() for the first io > will return IO error. Seems the uptodate flag is set/clear in end_buffer_read_sync() anyway, that support your skipping the clearing work before submitting IO. I wonder about the race that read the same block from different paths.. Do you have the detail? thanks, wengang > Indeed it's not necessary to clear uptodate flag, as the io end handler > end_buffer_read_sync() will set or clear it based on io succeed or failed. > > The following message was found from a nfs server but the underlying > storage returned no error. > > [4106438.567376] (nfsd,7146,3):ocfs2_get_suballoc_slot_bit:2780 ERROR: read block 1238823695 failed -5 > [4106438.567569] (nfsd,7146,3):ocfs2_get_suballoc_slot_bit:2812 ERROR: status = -5 > [4106438.567611] (nfsd,7146,3):ocfs2_test_inode_bit:2894 ERROR: get alloc slot and bit failed -5 > [4106438.567643] (nfsd,7146,3):ocfs2_test_inode_bit:2932 ERROR: status = -5 > [4106438.567675] (nfsd,7146,3):ocfs2_get_dentry:94 ERROR: test inode bit failed -5 > > Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> > --- > fs/ocfs2/buffer_head_io.c | 1 - > 1 file changed, 1 deletion(-) > > diff --git a/fs/ocfs2/buffer_head_io.c b/fs/ocfs2/buffer_head_io.c > index 4ebbd57cbf84..45ee47a3c91b 100644 > --- a/fs/ocfs2/buffer_head_io.c > +++ b/fs/ocfs2/buffer_head_io.c > @@ -161,7 +161,6 @@ int ocfs2_read_blocks_sync(struct ocfs2_super *osb, u64 block, > #endif > } > > - clear_buffer_uptodate(bh); > get_bh(bh); /* for end_buffer_read_sync() */ > bh->b_end_io = end_buffer_read_sync; > submit_bh(REQ_OP_READ, 0, bh);
Hi Changwei, You are right. I will include this in v2. Thanks for your review. Thanks, Junxiao. On 11/13/18 7:04 PM, Changwei Ge wrote: > Hi Junxiao, > > Do we have the same problem in ocfs2_read_blocks()? > > Thanks, > Changwei > > On 2018/11/13 13:00, Junxiao Bi wrote: >> For sync io read in ocfs2_read_blocks_sync(), first clear bh uptodate flag >> and submit the io, second wait io done, last check whether bh uptodate, >> if not return io error. >> >> If two sync io for the same bh were issued, it could be the first io done >> and set uptodate flag, but just before check that flag, the second io came >> in and cleared uptodate, then ocfs2_read_blocks_sync() for the first io >> will return IO error. >> >> Indeed it's not necessary to clear uptodate flag, as the io end handler >> end_buffer_read_sync() will set or clear it based on io succeed or failed. >> >> The following message was found from a nfs server but the underlying >> storage returned no error. >> >> [4106438.567376] (nfsd,7146,3):ocfs2_get_suballoc_slot_bit:2780 ERROR: read block 1238823695 failed -5 >> [4106438.567569] (nfsd,7146,3):ocfs2_get_suballoc_slot_bit:2812 ERROR: status = -5 >> [4106438.567611] (nfsd,7146,3):ocfs2_test_inode_bit:2894 ERROR: get alloc slot and bit failed -5 >> [4106438.567643] (nfsd,7146,3):ocfs2_test_inode_bit:2932 ERROR: status = -5 >> [4106438.567675] (nfsd,7146,3):ocfs2_get_dentry:94 ERROR: test inode bit failed -5 >> >> Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> >> --- >> fs/ocfs2/buffer_head_io.c | 1 - >> 1 file changed, 1 deletion(-) >> >> diff --git a/fs/ocfs2/buffer_head_io.c b/fs/ocfs2/buffer_head_io.c >> index 4ebbd57cbf84..45ee47a3c91b 100644 >> --- a/fs/ocfs2/buffer_head_io.c >> +++ b/fs/ocfs2/buffer_head_io.c >> @@ -161,7 +161,6 @@ int ocfs2_read_blocks_sync(struct ocfs2_super *osb, u64 block, >> #endif >> } >> >> - clear_buffer_uptodate(bh); >> get_bh(bh); /* for end_buffer_read_sync() */ >> bh->b_end_io = end_buffer_read_sync; >> submit_bh(REQ_OP_READ, 0, bh); >>
Hi Wengang, ocfs2_fh_to_dentry may run in parallel for the same handle? [4182529.044099] [<ffffffffa0aadd3b>] ocfs2_get_suballoc_slot_bit+0x5b/0x350 [ocfs2] [4182529.044799] [<ffffffffa0aae3fa>] ocfs2_test_inode_bit+0x6a/0x400 [ocfs2] [4182529.045488] [<ffffffffa0a73c25>] ? ocfs2_get_dentry+0x2b5/0x570 [ocfs2] [4182529.046166] [<ffffffffa0a73c3f>] ocfs2_get_dentry+0x2cf/0x570 [ocfs2] [4182529.046831] [<ffffffffa095533d>] ? exp_get_by_name+0x9d/0xc0 [nfsd] [4182529.047501] [<ffffffffa0ae6780>] ? CSWTCH.2756+0x19/0xffffffffffffe29a [ocfs2] [4182529.048160] [<ffffffffa094fdf0>] ? fh_update+0xe0/0xe0 [nfsd] [4182529.048824] [<ffffffffa0a73f74>] ocfs2_fh_to_dentry+0x44/0x50 [ocfs2] [4182529.049481] [<ffffffff8128e54f>] exportfs_decode_fh+0x6f/0x2a0 [4182529.050126] [<ffffffffa08bfbda>] ? sunrpc_cache_lookup+0x7a/0x2d0 [sunrpc] [4182529.050752] [<ffffffffa0955922>] ? exp_find+0xe2/0x190 [nfsd] [4182529.051369] [<ffffffff810a6226>] ? prepare_creds+0x26/0xe0 [4182529.051973] [<ffffffffa095019a>] nfsd_set_fh_dentry+0x20a/0x3d0 [nfsd] [4182529.052560] [<ffffffff810bc12e>] ? update_rq_runnable_avg+0xee/0x230 [4182529.053132] [<ffffffffa0950526>] fh_verify+0x1c6/0x200 [nfsd] [4182529.053692] [<ffffffffa0951c28>] nfsd_open+0x38/0x200 [nfsd] [4182529.054239] [<ffffffffa0952043>] nfsd_write+0xb3/0x100 [nfsd] [4182529.054771] [<ffffffff811e7a15>] ? kmem_cache_alloc+0x195/0x210 [4182529.055293] [<ffffffffa095b2ff>] nfsd3_proc_write+0xaf/0x140 [nfsd] [4182529.055807] [<ffffffffa09871a8>] ? nfsd_procedures3+0x188/0xffffffffffff7890 [nfsd] [4182529.056315] [<ffffffffa09871a8>] ? nfsd_procedures3+0x188/0xffffffffffff7890 [nfsd] [4182529.056808] [<ffffffffa094c635>] nfsd_dispatch+0xe5/0x230 [nfsd] [4182529.057299] [<ffffffffa08b51e2>] ? svc_tcp_adjust_wspace+0x12/0x30 [sunrpc] [4182529.057799] [<ffffffffa09871a8>] ? nfsd_procedures3+0x188/0xffffffffffff7890 [nfsd] [4182529.058305] [<ffffffffa08b4673>] svc_process_common+0x323/0x640 [sunrpc] [4182529.058827] [<ffffffffa0987000>] ? nfsd_acl_procedures2+0x120/0xffffffffffff79d0 [nfsd] [4182529.059337] [<ffffffffa094cf70>] ? nfsd_svc+0x130/0x130 [nfsd] [4182529.059841] [<ffffffffa08b4dd3>] svc_process+0x123/0x200 [sunrpc] [4182529.060336] [<ffffffffa094d067>] nfsd+0xf7/0x170 [nfsd] [4182529.060828] [<ffffffff810a46de>] kthread+0xce/0xf0 [4182529.061312] [<ffffffff810a4610>] ? kthread_freezable_should_stop+0x70/0x70 [4182529.061822] [<ffffffff816cbf22>] ret_from_fork+0x42/0x70 [4182529.062311] [<ffffffff810a4610>] ? kthread_freezable_should_stop+0x70/0x70 Thanks, Junxiao. On 11/14/18 2:22 AM, Wengang Wang wrote: > Hi Junxiao, > > > On 2018/11/12 20:58, Junxiao Bi wrote: >> For sync io read in ocfs2_read_blocks_sync(), first clear bh uptodate flag >> and submit the io, second wait io done, last check whether bh uptodate, >> if not return io error. >> >> If two sync io for the same bh were issued, it could be the first io done >> and set uptodate flag, but just before check that flag, the second io came >> in and cleared uptodate, then ocfs2_read_blocks_sync() for the first io >> will return IO error. > Seems the uptodate flag is set/clear in end_buffer_read_sync() anyway, > that support your skipping the clearing work before submitting IO. > I wonder about the race that read the same block from different paths.. > Do you have the detail? > > thanks, > wengang > >> Indeed it's not necessary to clear uptodate flag, as the io end handler >> end_buffer_read_sync() will set or clear it based on io succeed or failed. >> >> The following message was found from a nfs server but the underlying >> storage returned no error. >> >> [4106438.567376] (nfsd,7146,3):ocfs2_get_suballoc_slot_bit:2780 ERROR: read block 1238823695 failed -5 >> [4106438.567569] (nfsd,7146,3):ocfs2_get_suballoc_slot_bit:2812 ERROR: status = -5 >> [4106438.567611] (nfsd,7146,3):ocfs2_test_inode_bit:2894 ERROR: get alloc slot and bit failed -5 >> [4106438.567643] (nfsd,7146,3):ocfs2_test_inode_bit:2932 ERROR: status = -5 >> [4106438.567675] (nfsd,7146,3):ocfs2_get_dentry:94 ERROR: test inode bit failed -5 >> >> Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> >> --- >> fs/ocfs2/buffer_head_io.c | 1 - >> 1 file changed, 1 deletion(-) >> >> diff --git a/fs/ocfs2/buffer_head_io.c b/fs/ocfs2/buffer_head_io.c >> index 4ebbd57cbf84..45ee47a3c91b 100644 >> --- a/fs/ocfs2/buffer_head_io.c >> +++ b/fs/ocfs2/buffer_head_io.c >> @@ -161,7 +161,6 @@ int ocfs2_read_blocks_sync(struct ocfs2_super *osb, u64 block, >> #endif >> } >> >> - clear_buffer_uptodate(bh); >> get_bh(bh); /* for end_buffer_read_sync() */ >> bh->b_end_io = end_buffer_read_sync; >> submit_bh(REQ_OP_READ, 0, bh); > > _______________________________________________ > Ocfs2-devel mailing list > Ocfs2-devel@oss.oracle.com > https://oss.oracle.com/mailman/listinfo/ocfs2-devel
diff --git a/fs/ocfs2/buffer_head_io.c b/fs/ocfs2/buffer_head_io.c index 4ebbd57cbf84..45ee47a3c91b 100644 --- a/fs/ocfs2/buffer_head_io.c +++ b/fs/ocfs2/buffer_head_io.c @@ -161,7 +161,6 @@ int ocfs2_read_blocks_sync(struct ocfs2_super *osb, u64 block, #endif } - clear_buffer_uptodate(bh); get_bh(bh); /* for end_buffer_read_sync() */ bh->b_end_io = end_buffer_read_sync; submit_bh(REQ_OP_READ, 0, bh);
For sync io read in ocfs2_read_blocks_sync(), first clear bh uptodate flag and submit the io, second wait io done, last check whether bh uptodate, if not return io error. If two sync io for the same bh were issued, it could be the first io done and set uptodate flag, but just before check that flag, the second io came in and cleared uptodate, then ocfs2_read_blocks_sync() for the first io will return IO error. Indeed it's not necessary to clear uptodate flag, as the io end handler end_buffer_read_sync() will set or clear it based on io succeed or failed. The following message was found from a nfs server but the underlying storage returned no error. [4106438.567376] (nfsd,7146,3):ocfs2_get_suballoc_slot_bit:2780 ERROR: read block 1238823695 failed -5 [4106438.567569] (nfsd,7146,3):ocfs2_get_suballoc_slot_bit:2812 ERROR: status = -5 [4106438.567611] (nfsd,7146,3):ocfs2_test_inode_bit:2894 ERROR: get alloc slot and bit failed -5 [4106438.567643] (nfsd,7146,3):ocfs2_test_inode_bit:2932 ERROR: status = -5 [4106438.567675] (nfsd,7146,3):ocfs2_get_dentry:94 ERROR: test inode bit failed -5 Signed-off-by: Junxiao Bi <junxiao.bi@oracle.com> --- fs/ocfs2/buffer_head_io.c | 1 - 1 file changed, 1 deletion(-)