| Message ID | 1f778872d177146336318cf856a2c0b06870b1b7.1683568762.git.limings@nvidia.com (mailing list archive) |
|---|---|
| State | Changes Requested, archived |
| Headers | show |
| Series | [v1,1/1] mlxbf-bootctl: Add sysfs file for BlueField boot log | expand |
Hi, On 5/8/23 20:01, Liming Sun wrote: > This commit adds sysfs interface to be used to write into the > boot log which is 1KB HW buffer on BlueField SoC. The same log > buffer is also used by firmware code like ATF/UEFI, and can be > displayed by userspace tools or from external host via USB/PCIe. > > Signed-off-by: Liming Sun <limings@nvidia.com> > Reviewed-by: Vadim Pasternak <vadimp@nvidia.com> Vadim, David, I would appreciate if one of you could also take a look at this patch. > --- > .../testing/sysfs-platform-mellanox-bootctl | 7 + > drivers/platform/mellanox/mlxbf-bootctl.c | 141 ++++++++++++++++++ > 2 files changed, 148 insertions(+) > > diff --git a/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl b/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl > index 9b99a81babb1..239184db57dd 100644 > --- a/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl > +++ b/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl > @@ -75,3 +75,10 @@ KernelVersion: 6.4 > Contact: "Liming Sun <limings@nvidia.com>" > Description: > The file used to access the BlueField boot fifo. > + > +What: /sys/bus/platform/devices/MLNXBF04:00/rsh_log > +Date: May 2023 > +KernelVersion: 6.4 > +Contact: "Liming Sun <limings@nvidia.com>" > +Description: > + The file used to access the BlueField boot log. Access suggests reading, but this is a write-only file please make this more clear. Also please document the accepted prefixes for log levels here / document the log format. > diff --git a/drivers/platform/mellanox/mlxbf-bootctl.c b/drivers/platform/mellanox/mlxbf-bootctl.c > index 1bad1d278672..c02062cb3128 100644 > --- a/drivers/platform/mellanox/mlxbf-bootctl.c > +++ b/drivers/platform/mellanox/mlxbf-bootctl.c > @@ -45,10 +45,38 @@ static const char * const mlxbf_bootctl_lifecycle_states[] = { > [3] = "RMA", > }; > > +/* Log header format. */ > +#define MLXBF_RSH_LOG_TYPE_SHIFT 56 > +#define MLXBF_RSH_LOG_LEN_SHIFT 48 > +#define MLXBF_RSH_LOG_LEVEL_SHIFT 0 > + > +/* Log module ID and type (only MSG type in Linux driver for now). */ > +#define MLXBF_RSH_LOG_TYPE_MSG 0x04ULL > + > +/* Log ctl/data register offset. */ > +#define MLXBF_RSH_SCRATCH_BUF_CTL_OFF 0 > +#define MLXBF_RSH_SCRATCH_BUF_DATA_OFF 0x10 > + > +/* Log message levels. */ > +enum { > + MLXBF_RSH_LOG_INFO, > + MLXBF_RSH_LOG_WARN, > + MLXBF_RSH_LOG_ERR > +}; > + > /* Mapped pointer for RSH_BOOT_FIFO_DATA and RSH_BOOT_FIFO_COUNT register. */ > static void __iomem *mlxbf_rsh_boot_data; > static void __iomem *mlxbf_rsh_boot_cnt; > > +/* Mapped pointer for rsh log semaphore/ctrl/data register. */ > +static void __iomem *mlxbf_rsh_semaphore; > +static void __iomem *mlxbf_rsh_scratch_buf_ctl; > +static void __iomem *mlxbf_rsh_scratch_buf_data; > + > +/* Rsh log levels. */ > +static const char * const mlxbf_rsh_log_level[] = { > + "INFO", "WARN", "ERR", "ASSERT"}; > + > /* ARM SMC call which is atomic and no need for lock. */ > static int mlxbf_bootctl_smc(unsigned int smc_op, int smc_arg) > { > @@ -266,12 +294,111 @@ static ssize_t fw_reset_store(struct device *dev, > return count; > } > > +/* Size(8-byte words) of the log buffer. */ > +#define RSH_SCRATCH_BUF_CTL_IDX_MASK 0x7f > + > +static int mlxbf_rsh_log_sem_lock(void) > +{ > + unsigned long timeout; > + > + /* Take the semaphore. */ > + timeout = jiffies + msecs_to_jiffies(100); > + while (readq(mlxbf_rsh_semaphore)) { > + if (time_after(jiffies, timeout)) > + return -ETIMEDOUT; > + } > + > + return 0; > +} > + > +static void mlxbf_rsh_log_sem_unlock(void) > +{ > + writeq(0, mlxbf_rsh_semaphore); > +} > + > +static ssize_t rsh_log_store(struct device *dev, > + struct device_attribute *attr, > + const char *buf, size_t count) > +{ > + int rc, idx, num, len, size = (int)count, level = MLXBF_RSH_LOG_INFO; > + u64 data; > + > + if (!size) > + return -EINVAL; > + > + if (!mlxbf_rsh_semaphore || !mlxbf_rsh_scratch_buf_ctl) > + return -EOPNOTSUPP; > + > + /* Ignore line break at the end. */ > + if (buf[size - 1] == 0xa) Please replace 0x0a with '\n' . > + size--; > + > + /* Check the message prefix. */ > + for (idx = 0; idx < ARRAY_SIZE(mlxbf_rsh_log_level); idx++) { > + len = strlen(mlxbf_rsh_log_level[idx]); > + if (len + 1 < size && > + !strncmp(buf, mlxbf_rsh_log_level[idx], len)) { > + buf += len + 1; Why len + 1, this seems intended to assume some separator between prefix and the actual message? But if that is the case please also check that the expected separator character is there. Otherwise this looks good to me. Regards, Hans > + size -= len + 1; > + level = idx; > + break; > + } > + } > + > + /* Ignore leading spaces. */ > + while (size > 0 && buf[0] == ' ') { > + size--; > + buf++; > + } > + > + /* Take the semaphore. */ > + rc = mlxbf_rsh_log_sem_lock(); > + if (rc) > + return rc; > + > + /* Calculate how many words are available. */ > + num = (size + sizeof(u64) - 1) / sizeof(u64); > + idx = readq(mlxbf_rsh_scratch_buf_ctl); > + if (idx + num + 1 >= RSH_SCRATCH_BUF_CTL_IDX_MASK) > + num = RSH_SCRATCH_BUF_CTL_IDX_MASK - idx - 1; > + if (num <= 0) > + goto done; > + > + /* Write Header. */ > + data = (MLXBF_RSH_LOG_TYPE_MSG << MLXBF_RSH_LOG_TYPE_SHIFT) | > + ((u64)num << MLXBF_RSH_LOG_LEN_SHIFT) | > + ((u64)level << MLXBF_RSH_LOG_LEVEL_SHIFT); > + writeq(data, mlxbf_rsh_scratch_buf_data); > + > + /* Write message. */ > + for (idx = 0, len = size; idx < num && len > 0; idx++) { > + if (len <= sizeof(u64)) { > + data = 0; > + memcpy(&data, buf, len); > + len = 0; > + } else { > + memcpy(&data, buf, sizeof(u64)); > + len -= sizeof(u64); > + buf += sizeof(u64); > + } > + writeq(data, mlxbf_rsh_scratch_buf_data); > + } > + > +done: > + /* Release the semaphore. */ > + mlxbf_rsh_log_sem_unlock(); > + > + /* Ignore the rest if no more space. */ > + return count; > +} > + > static DEVICE_ATTR_RW(post_reset_wdog); > static DEVICE_ATTR_RW(reset_action); > static DEVICE_ATTR_RW(second_reset_action); > static DEVICE_ATTR_RO(lifecycle_state); > static DEVICE_ATTR_RO(secure_boot_fuse_state); > static DEVICE_ATTR_WO(fw_reset); > +static DEVICE_ATTR_WO(rsh_log); > > static struct attribute *mlxbf_bootctl_attrs[] = { > &dev_attr_post_reset_wdog.attr, > @@ -280,6 +407,7 @@ static struct attribute *mlxbf_bootctl_attrs[] = { > &dev_attr_lifecycle_state.attr, > &dev_attr_secure_boot_fuse_state.attr, > &dev_attr_fw_reset.attr, > + &dev_attr_rsh_log.attr, > NULL > }; > > @@ -345,6 +473,7 @@ static bool mlxbf_bootctl_guid_match(const guid_t *guid, > static int mlxbf_bootctl_probe(struct platform_device *pdev) > { > struct arm_smccc_res res = { 0 }; > + void __iomem *reg; > guid_t guid; > int ret; > > @@ -358,6 +487,18 @@ static int mlxbf_bootctl_probe(struct platform_device *pdev) > if (IS_ERR(mlxbf_rsh_boot_cnt)) > return PTR_ERR(mlxbf_rsh_boot_cnt); > > + /* Get the resource of the bootfifo counter register. */ > + mlxbf_rsh_semaphore = devm_platform_ioremap_resource(pdev, 2); > + if (IS_ERR(mlxbf_rsh_semaphore)) > + return PTR_ERR(mlxbf_rsh_semaphore); > + > + /* Get the resource of the bootfifo counter register. */ > + reg = devm_platform_ioremap_resource(pdev, 3); > + if (IS_ERR(reg)) > + return PTR_ERR(reg); > + mlxbf_rsh_scratch_buf_ctl = reg + MLXBF_RSH_SCRATCH_BUF_CTL_OFF; > + mlxbf_rsh_scratch_buf_data = reg + MLXBF_RSH_SCRATCH_BUF_DATA_OFF; > + > /* Ensure we have the UUID we expect for this service. */ > arm_smccc_smc(MLXBF_BOOTCTL_SIP_SVC_UID, 0, 0, 0, 0, 0, 0, 0, &res); > guid_parse(mlxbf_bootctl_svc_uuid_str, &guid);
> -----Original Message----- > From: Hans de Goede <hdegoede@redhat.com> > Sent: Tuesday, May 9, 2023 6:07 AM > To: Liming Sun <limings@nvidia.com>; Vadim Pasternak > <vadimp@nvidia.com>; David Thompson <davthompson@nvidia.com>; Mark > Gross <markgross@kernel.org> > Cc: platform-driver-x86@vger.kernel.org; linux-kernel@vger.kernel.org > Subject: Re: [PATCH v1 1/1] mlxbf-bootctl: Add sysfs file for BlueField boot log > > Hi, > > On 5/8/23 20:01, Liming Sun wrote: > > This commit adds sysfs interface to be used to write into the > > boot log which is 1KB HW buffer on BlueField SoC. The same log > > buffer is also used by firmware code like ATF/UEFI, and can be > > displayed by userspace tools or from external host via USB/PCIe. > > > > Signed-off-by: Liming Sun <limings@nvidia.com> > > Reviewed-by: Vadim Pasternak <vadimp@nvidia.com> > > Vadim, David, I would appreciate if one of you could also > take a look at this patch. v2 has been posted with internal review with Vadim. > > > --- > > .../testing/sysfs-platform-mellanox-bootctl | 7 + > > drivers/platform/mellanox/mlxbf-bootctl.c | 141 ++++++++++++++++++ > > 2 files changed, 148 insertions(+) > > > > diff --git a/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl > b/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl > > index 9b99a81babb1..239184db57dd 100644 > > --- a/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl > > +++ b/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl > > @@ -75,3 +75,10 @@ KernelVersion: 6.4 > > Contact: "Liming Sun <limings@nvidia.com>" > > Description: > > The file used to access the BlueField boot fifo. > > + > > +What: /sys/bus/platform/devices/MLNXBF04:00/rsh_log > > +Date: May 2023 > > +KernelVersion: 6.4 > > +Contact: "Liming Sun <limings@nvidia.com>" > > +Description: > > + The file used to access the BlueField boot log. > > Access suggests reading, but this is a write-only file please make this more > clear. Updated in v2 to clarify it's for write. > > Also please document the accepted prefixes for log levels here / document > the log format. Updated in v2 with more details about the log format. > > > diff --git a/drivers/platform/mellanox/mlxbf-bootctl.c > b/drivers/platform/mellanox/mlxbf-bootctl.c > > index 1bad1d278672..c02062cb3128 100644 > > --- a/drivers/platform/mellanox/mlxbf-bootctl.c > > +++ b/drivers/platform/mellanox/mlxbf-bootctl.c > > @@ -45,10 +45,38 @@ static const char * const > mlxbf_bootctl_lifecycle_states[] = { > > [3] = "RMA", > > }; > > > > +/* Log header format. */ > > +#define MLXBF_RSH_LOG_TYPE_SHIFT 56 > > +#define MLXBF_RSH_LOG_LEN_SHIFT 48 > > +#define MLXBF_RSH_LOG_LEVEL_SHIFT 0 > > + > > +/* Log module ID and type (only MSG type in Linux driver for now). */ > > +#define MLXBF_RSH_LOG_TYPE_MSG 0x04ULL > > + > > +/* Log ctl/data register offset. */ > > +#define MLXBF_RSH_SCRATCH_BUF_CTL_OFF 0 > > +#define MLXBF_RSH_SCRATCH_BUF_DATA_OFF 0x10 > > + > > +/* Log message levels. */ > > +enum { > > + MLXBF_RSH_LOG_INFO, > > + MLXBF_RSH_LOG_WARN, > > + MLXBF_RSH_LOG_ERR > > +}; > > + > > /* Mapped pointer for RSH_BOOT_FIFO_DATA and RSH_BOOT_FIFO_COUNT > register. */ > > static void __iomem *mlxbf_rsh_boot_data; > > static void __iomem *mlxbf_rsh_boot_cnt; > > > > +/* Mapped pointer for rsh log semaphore/ctrl/data register. */ > > +static void __iomem *mlxbf_rsh_semaphore; > > +static void __iomem *mlxbf_rsh_scratch_buf_ctl; > > +static void __iomem *mlxbf_rsh_scratch_buf_data; > > + > > +/* Rsh log levels. */ > > +static const char * const mlxbf_rsh_log_level[] = { > > + "INFO", "WARN", "ERR", "ASSERT"}; > > + > > /* ARM SMC call which is atomic and no need for lock. */ > > static int mlxbf_bootctl_smc(unsigned int smc_op, int smc_arg) > > { > > @@ -266,12 +294,111 @@ static ssize_t fw_reset_store(struct device *dev, > > return count; > > } > > > > +/* Size(8-byte words) of the log buffer. */ > > +#define RSH_SCRATCH_BUF_CTL_IDX_MASK 0x7f > > + > > +static int mlxbf_rsh_log_sem_lock(void) > > +{ > > + unsigned long timeout; > > + > > + /* Take the semaphore. */ > > + timeout = jiffies + msecs_to_jiffies(100); > > + while (readq(mlxbf_rsh_semaphore)) { > > + if (time_after(jiffies, timeout)) > > + return -ETIMEDOUT; > > + } > > + > > + return 0; > > +} > > + > > +static void mlxbf_rsh_log_sem_unlock(void) > > +{ > > + writeq(0, mlxbf_rsh_semaphore); > > +} > > + > > +static ssize_t rsh_log_store(struct device *dev, > > + struct device_attribute *attr, > > + const char *buf, size_t count) > > +{ > > + int rc, idx, num, len, size = (int)count, level = MLXBF_RSH_LOG_INFO; > > + u64 data; > > + > > + if (!size) > > + return -EINVAL; > > + > > + if (!mlxbf_rsh_semaphore || !mlxbf_rsh_scratch_buf_ctl) > > + return -EOPNOTSUPP; > > + > > + /* Ignore line break at the end. */ > > + if (buf[size - 1] == 0xa) > > Please replace 0x0a with '\n' . Updated in v2 > > > + size--; > > + > > + /* Check the message prefix. */ > > + for (idx = 0; idx < ARRAY_SIZE(mlxbf_rsh_log_level); idx++) { > > + len = strlen(mlxbf_rsh_log_level[idx]); > > + if (len + 1 < size && > > + !strncmp(buf, mlxbf_rsh_log_level[idx], len)) { > > + buf += len + 1; > > Why len + 1, this seems intended to assume some separator > between prefix and the actual message? But if that is > the case please also check that the expected separator > character is there. Good catch. Updated in v2 to remove the '+ 1" which causes confusing. The separator logic is already covered in next code block. > > Otherwise this looks good to me. > > Regards, > > Hans > > > > > + size -= len + 1; > > + level = idx; > > + break; > > + } > > + } > > + > > + /* Ignore leading spaces. */ > > + while (size > 0 && buf[0] == ' ') { > > + size--; > > + buf++; > > + } > > + > > + /* Take the semaphore. */ > > + rc = mlxbf_rsh_log_sem_lock(); > > + if (rc) > > + return rc; > > + > > + /* Calculate how many words are available. */ > > + num = (size + sizeof(u64) - 1) / sizeof(u64); > > + idx = readq(mlxbf_rsh_scratch_buf_ctl); > > + if (idx + num + 1 >= RSH_SCRATCH_BUF_CTL_IDX_MASK) > > + num = RSH_SCRATCH_BUF_CTL_IDX_MASK - idx - 1; > > + if (num <= 0) > > + goto done; > > + > > + /* Write Header. */ > > + data = (MLXBF_RSH_LOG_TYPE_MSG << > MLXBF_RSH_LOG_TYPE_SHIFT) | > > + ((u64)num << MLXBF_RSH_LOG_LEN_SHIFT) | > > + ((u64)level << MLXBF_RSH_LOG_LEVEL_SHIFT); > > + writeq(data, mlxbf_rsh_scratch_buf_data); > > + > > + /* Write message. */ > > + for (idx = 0, len = size; idx < num && len > 0; idx++) { > > + if (len <= sizeof(u64)) { > > + data = 0; > > + memcpy(&data, buf, len); > > + len = 0; > > + } else { > > + memcpy(&data, buf, sizeof(u64)); > > + len -= sizeof(u64); > > + buf += sizeof(u64); > > + } > > + writeq(data, mlxbf_rsh_scratch_buf_data); > > + } > > + > > +done: > > + /* Release the semaphore. */ > > + mlxbf_rsh_log_sem_unlock(); > > + > > + /* Ignore the rest if no more space. */ > > + return count; > > +} > > + > > static DEVICE_ATTR_RW(post_reset_wdog); > > static DEVICE_ATTR_RW(reset_action); > > static DEVICE_ATTR_RW(second_reset_action); > > static DEVICE_ATTR_RO(lifecycle_state); > > static DEVICE_ATTR_RO(secure_boot_fuse_state); > > static DEVICE_ATTR_WO(fw_reset); > > +static DEVICE_ATTR_WO(rsh_log); > > > > static struct attribute *mlxbf_bootctl_attrs[] = { > > &dev_attr_post_reset_wdog.attr, > > @@ -280,6 +407,7 @@ static struct attribute *mlxbf_bootctl_attrs[] = { > > &dev_attr_lifecycle_state.attr, > > &dev_attr_secure_boot_fuse_state.attr, > > &dev_attr_fw_reset.attr, > > + &dev_attr_rsh_log.attr, > > NULL > > }; > > > > @@ -345,6 +473,7 @@ static bool mlxbf_bootctl_guid_match(const guid_t > *guid, > > static int mlxbf_bootctl_probe(struct platform_device *pdev) > > { > > struct arm_smccc_res res = { 0 }; > > + void __iomem *reg; > > guid_t guid; > > int ret; > > > > @@ -358,6 +487,18 @@ static int mlxbf_bootctl_probe(struct > platform_device *pdev) > > if (IS_ERR(mlxbf_rsh_boot_cnt)) > > return PTR_ERR(mlxbf_rsh_boot_cnt); > > > > + /* Get the resource of the bootfifo counter register. */ > > + mlxbf_rsh_semaphore = devm_platform_ioremap_resource(pdev, 2); > > + if (IS_ERR(mlxbf_rsh_semaphore)) > > + return PTR_ERR(mlxbf_rsh_semaphore); > > + > > + /* Get the resource of the bootfifo counter register. */ > > + reg = devm_platform_ioremap_resource(pdev, 3); > > + if (IS_ERR(reg)) > > + return PTR_ERR(reg); > > + mlxbf_rsh_scratch_buf_ctl = reg + > MLXBF_RSH_SCRATCH_BUF_CTL_OFF; > > + mlxbf_rsh_scratch_buf_data = reg + > MLXBF_RSH_SCRATCH_BUF_DATA_OFF; > > + > > /* Ensure we have the UUID we expect for this service. */ > > arm_smccc_smc(MLXBF_BOOTCTL_SIP_SVC_UID, 0, 0, 0, 0, 0, 0, 0, > &res); > > guid_parse(mlxbf_bootctl_svc_uuid_str, &guid);
diff --git a/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl b/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl index 9b99a81babb1..239184db57dd 100644 --- a/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl +++ b/Documentation/ABI/testing/sysfs-platform-mellanox-bootctl @@ -75,3 +75,10 @@ KernelVersion: 6.4 Contact: "Liming Sun <limings@nvidia.com>" Description: The file used to access the BlueField boot fifo. + +What: /sys/bus/platform/devices/MLNXBF04:00/rsh_log +Date: May 2023 +KernelVersion: 6.4 +Contact: "Liming Sun <limings@nvidia.com>" +Description: + The file used to access the BlueField boot log. diff --git a/drivers/platform/mellanox/mlxbf-bootctl.c b/drivers/platform/mellanox/mlxbf-bootctl.c index 1bad1d278672..c02062cb3128 100644 --- a/drivers/platform/mellanox/mlxbf-bootctl.c +++ b/drivers/platform/mellanox/mlxbf-bootctl.c @@ -45,10 +45,38 @@ static const char * const mlxbf_bootctl_lifecycle_states[] = { [3] = "RMA", }; +/* Log header format. */ +#define MLXBF_RSH_LOG_TYPE_SHIFT 56 +#define MLXBF_RSH_LOG_LEN_SHIFT 48 +#define MLXBF_RSH_LOG_LEVEL_SHIFT 0 + +/* Log module ID and type (only MSG type in Linux driver for now). */ +#define MLXBF_RSH_LOG_TYPE_MSG 0x04ULL + +/* Log ctl/data register offset. */ +#define MLXBF_RSH_SCRATCH_BUF_CTL_OFF 0 +#define MLXBF_RSH_SCRATCH_BUF_DATA_OFF 0x10 + +/* Log message levels. */ +enum { + MLXBF_RSH_LOG_INFO, + MLXBF_RSH_LOG_WARN, + MLXBF_RSH_LOG_ERR +}; + /* Mapped pointer for RSH_BOOT_FIFO_DATA and RSH_BOOT_FIFO_COUNT register. */ static void __iomem *mlxbf_rsh_boot_data; static void __iomem *mlxbf_rsh_boot_cnt; +/* Mapped pointer for rsh log semaphore/ctrl/data register. */ +static void __iomem *mlxbf_rsh_semaphore; +static void __iomem *mlxbf_rsh_scratch_buf_ctl; +static void __iomem *mlxbf_rsh_scratch_buf_data; + +/* Rsh log levels. */ +static const char * const mlxbf_rsh_log_level[] = { + "INFO", "WARN", "ERR", "ASSERT"}; + /* ARM SMC call which is atomic and no need for lock. */ static int mlxbf_bootctl_smc(unsigned int smc_op, int smc_arg) { @@ -266,12 +294,111 @@ static ssize_t fw_reset_store(struct device *dev, return count; } +/* Size(8-byte words) of the log buffer. */ +#define RSH_SCRATCH_BUF_CTL_IDX_MASK 0x7f + +static int mlxbf_rsh_log_sem_lock(void) +{ + unsigned long timeout; + + /* Take the semaphore. */ + timeout = jiffies + msecs_to_jiffies(100); + while (readq(mlxbf_rsh_semaphore)) { + if (time_after(jiffies, timeout)) + return -ETIMEDOUT; + } + + return 0; +} + +static void mlxbf_rsh_log_sem_unlock(void) +{ + writeq(0, mlxbf_rsh_semaphore); +} + +static ssize_t rsh_log_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + int rc, idx, num, len, size = (int)count, level = MLXBF_RSH_LOG_INFO; + u64 data; + + if (!size) + return -EINVAL; + + if (!mlxbf_rsh_semaphore || !mlxbf_rsh_scratch_buf_ctl) + return -EOPNOTSUPP; + + /* Ignore line break at the end. */ + if (buf[size - 1] == 0xa) + size--; + + /* Check the message prefix. */ + for (idx = 0; idx < ARRAY_SIZE(mlxbf_rsh_log_level); idx++) { + len = strlen(mlxbf_rsh_log_level[idx]); + if (len + 1 < size && + !strncmp(buf, mlxbf_rsh_log_level[idx], len)) { + buf += len + 1; + size -= len + 1; + level = idx; + break; + } + } + + /* Ignore leading spaces. */ + while (size > 0 && buf[0] == ' ') { + size--; + buf++; + } + + /* Take the semaphore. */ + rc = mlxbf_rsh_log_sem_lock(); + if (rc) + return rc; + + /* Calculate how many words are available. */ + num = (size + sizeof(u64) - 1) / sizeof(u64); + idx = readq(mlxbf_rsh_scratch_buf_ctl); + if (idx + num + 1 >= RSH_SCRATCH_BUF_CTL_IDX_MASK) + num = RSH_SCRATCH_BUF_CTL_IDX_MASK - idx - 1; + if (num <= 0) + goto done; + + /* Write Header. */ + data = (MLXBF_RSH_LOG_TYPE_MSG << MLXBF_RSH_LOG_TYPE_SHIFT) | + ((u64)num << MLXBF_RSH_LOG_LEN_SHIFT) | + ((u64)level << MLXBF_RSH_LOG_LEVEL_SHIFT); + writeq(data, mlxbf_rsh_scratch_buf_data); + + /* Write message. */ + for (idx = 0, len = size; idx < num && len > 0; idx++) { + if (len <= sizeof(u64)) { + data = 0; + memcpy(&data, buf, len); + len = 0; + } else { + memcpy(&data, buf, sizeof(u64)); + len -= sizeof(u64); + buf += sizeof(u64); + } + writeq(data, mlxbf_rsh_scratch_buf_data); + } + +done: + /* Release the semaphore. */ + mlxbf_rsh_log_sem_unlock(); + + /* Ignore the rest if no more space. */ + return count; +} + static DEVICE_ATTR_RW(post_reset_wdog); static DEVICE_ATTR_RW(reset_action); static DEVICE_ATTR_RW(second_reset_action); static DEVICE_ATTR_RO(lifecycle_state); static DEVICE_ATTR_RO(secure_boot_fuse_state); static DEVICE_ATTR_WO(fw_reset); +static DEVICE_ATTR_WO(rsh_log); static struct attribute *mlxbf_bootctl_attrs[] = { &dev_attr_post_reset_wdog.attr, @@ -280,6 +407,7 @@ static struct attribute *mlxbf_bootctl_attrs[] = { &dev_attr_lifecycle_state.attr, &dev_attr_secure_boot_fuse_state.attr, &dev_attr_fw_reset.attr, + &dev_attr_rsh_log.attr, NULL }; @@ -345,6 +473,7 @@ static bool mlxbf_bootctl_guid_match(const guid_t *guid, static int mlxbf_bootctl_probe(struct platform_device *pdev) { struct arm_smccc_res res = { 0 }; + void __iomem *reg; guid_t guid; int ret; @@ -358,6 +487,18 @@ static int mlxbf_bootctl_probe(struct platform_device *pdev) if (IS_ERR(mlxbf_rsh_boot_cnt)) return PTR_ERR(mlxbf_rsh_boot_cnt); + /* Get the resource of the bootfifo counter register. */ + mlxbf_rsh_semaphore = devm_platform_ioremap_resource(pdev, 2); + if (IS_ERR(mlxbf_rsh_semaphore)) + return PTR_ERR(mlxbf_rsh_semaphore); + + /* Get the resource of the bootfifo counter register. */ + reg = devm_platform_ioremap_resource(pdev, 3); + if (IS_ERR(reg)) + return PTR_ERR(reg); + mlxbf_rsh_scratch_buf_ctl = reg + MLXBF_RSH_SCRATCH_BUF_CTL_OFF; + mlxbf_rsh_scratch_buf_data = reg + MLXBF_RSH_SCRATCH_BUF_DATA_OFF; + /* Ensure we have the UUID we expect for this service. */ arm_smccc_smc(MLXBF_BOOTCTL_SIP_SVC_UID, 0, 0, 0, 0, 0, 0, 0, &res); guid_parse(mlxbf_bootctl_svc_uuid_str, &guid);