Message ID | 20170830094814.17758-7-hdegoede@redhat.com (mailing list archive) |
---|---|
State | Awaiting Upstream, archived |
Headers | show |
On 08/30/2017 02:48 AM, Hans de Goede wrote: > The fusb302 port-controller relies on an external device doing USB2 > charger-type detection. > > The Intel Whiskey Cove PMIC with which the fusb302 is combined on some > X86/ACPI platforms already has a charger-type detection driver which > uses extcon to communicate the detected charger-type. > > Rather then inventing a new API for USB2 charger-type detection > specifically for use with the tcpm code, this commit simply re-uses the > existing extcon API and uses that do USB2 charger detection. > > Note that the "fcs,extcon-name" property name is only for kernel internal > use by X86/ACPI platform code and as such is NOT documented in > the fusb302 devicetree bindings. > > Cc: "Yueyao (Nathan) Zhu" <yueyao@google.com> > Signed-off-by: Hans de Goede <hdegoede@redhat.com> Reviewed-by: Guenter Roeck <linux@roeck-us.net> > --- > Changes in v2: > -Put extcon code directly in fusb302.c rather then introducing helpers > which are only used by fusb302.c > > Changes in v3: > -Improve commit message > --- > drivers/staging/typec/fusb302/fusb302.c | 49 +++++++++++++++++++++++++++++++++ > 1 file changed, 49 insertions(+) > > diff --git a/drivers/staging/typec/fusb302/fusb302.c b/drivers/staging/typec/fusb302/fusb302.c > index 675161cf4f3a..6f007f66d597 100644 > --- a/drivers/staging/typec/fusb302/fusb302.c > +++ b/drivers/staging/typec/fusb302/fusb302.c > @@ -17,6 +17,7 @@ > #include <linux/debugfs.h> > #include <linux/delay.h> > #include <linux/errno.h> > +#include <linux/extcon.h> > #include <linux/gpio.h> > #include <linux/i2c.h> > #include <linux/interrupt.h> > @@ -96,6 +97,7 @@ struct fusb302_chip { > > int gpio_int_n; > int gpio_int_n_irq; > + struct extcon_dev *extcon; > > struct workqueue_struct *wq; > struct delayed_work bc_lvl_handler; > @@ -516,6 +518,38 @@ static int tcpm_get_vbus(struct tcpc_dev *dev) > return ret; > } > > +static int tcpm_get_current_limit(struct tcpc_dev *dev) > +{ > + struct fusb302_chip *chip = container_of(dev, struct fusb302_chip, > + tcpc_dev); > + int current_limit = 0; > + unsigned long timeout; > + > + if (!chip->extcon) > + return 0; > + > + /* > + * USB2 Charger detection may still be in progress when we get here, > + * this can take upto 600ms, wait 800ms max. > + */ > + timeout = jiffies + msecs_to_jiffies(800); > + do { > + if (extcon_get_state(chip->extcon, EXTCON_CHG_USB_SDP) == 1) > + current_limit = 500; > + > + if (extcon_get_state(chip->extcon, EXTCON_CHG_USB_CDP) == 1 || > + extcon_get_state(chip->extcon, EXTCON_CHG_USB_ACA) == 1) > + current_limit = 1500; > + > + if (extcon_get_state(chip->extcon, EXTCON_CHG_USB_DCP) == 1) > + current_limit = 2000; > + > + msleep(50); > + } while (current_limit == 0 && time_before(jiffies, timeout)); > + > + return current_limit; > +} > + > static int fusb302_set_cc_pull(struct fusb302_chip *chip, > bool pull_up, bool pull_down) > { > @@ -1201,6 +1235,7 @@ static void init_tcpc_dev(struct tcpc_dev *fusb302_tcpc_dev) > { > fusb302_tcpc_dev->init = tcpm_init; > fusb302_tcpc_dev->get_vbus = tcpm_get_vbus; > + fusb302_tcpc_dev->get_current_limit = tcpm_get_current_limit; > fusb302_tcpc_dev->set_cc = tcpm_set_cc; > fusb302_tcpc_dev->get_cc = tcpm_get_cc; > fusb302_tcpc_dev->set_polarity = tcpm_set_polarity; > @@ -1685,6 +1720,7 @@ static int fusb302_probe(struct i2c_client *client, > struct fusb302_chip *chip; > struct i2c_adapter *adapter; > struct device *dev = &client->dev; > + const char *name; > int ret = 0; > u32 v; > > @@ -1717,6 +1753,19 @@ static int fusb302_probe(struct i2c_client *client, > if (!device_property_read_u32(dev, "fcs,operating-sink-microwatt", &v)) > chip->tcpc_config.operating_snk_mw = v / 1000; > > + /* > + * Devicetree platforms should get extcon via phandle (not yet > + * supported). On ACPI platforms, we get the name from a device prop. > + * This device prop is for kernel internal use only and is expected > + * to be set by the platform code which also registers the i2c client > + * for the fusb302. > + */ > + if (device_property_read_string(dev, "fcs,extcon-name", &name) == 0) { > + chip->extcon = extcon_get_extcon_dev(name); > + if (!chip->extcon) > + return -EPROBE_DEFER; > + } > + > ret = fusb302_debugfs_init(chip); > if (ret < 0) > return ret; >
diff --git a/drivers/staging/typec/fusb302/fusb302.c b/drivers/staging/typec/fusb302/fusb302.c index 675161cf4f3a..6f007f66d597 100644 --- a/drivers/staging/typec/fusb302/fusb302.c +++ b/drivers/staging/typec/fusb302/fusb302.c @@ -17,6 +17,7 @@ #include <linux/debugfs.h> #include <linux/delay.h> #include <linux/errno.h> +#include <linux/extcon.h> #include <linux/gpio.h> #include <linux/i2c.h> #include <linux/interrupt.h> @@ -96,6 +97,7 @@ struct fusb302_chip { int gpio_int_n; int gpio_int_n_irq; + struct extcon_dev *extcon; struct workqueue_struct *wq; struct delayed_work bc_lvl_handler; @@ -516,6 +518,38 @@ static int tcpm_get_vbus(struct tcpc_dev *dev) return ret; } +static int tcpm_get_current_limit(struct tcpc_dev *dev) +{ + struct fusb302_chip *chip = container_of(dev, struct fusb302_chip, + tcpc_dev); + int current_limit = 0; + unsigned long timeout; + + if (!chip->extcon) + return 0; + + /* + * USB2 Charger detection may still be in progress when we get here, + * this can take upto 600ms, wait 800ms max. + */ + timeout = jiffies + msecs_to_jiffies(800); + do { + if (extcon_get_state(chip->extcon, EXTCON_CHG_USB_SDP) == 1) + current_limit = 500; + + if (extcon_get_state(chip->extcon, EXTCON_CHG_USB_CDP) == 1 || + extcon_get_state(chip->extcon, EXTCON_CHG_USB_ACA) == 1) + current_limit = 1500; + + if (extcon_get_state(chip->extcon, EXTCON_CHG_USB_DCP) == 1) + current_limit = 2000; + + msleep(50); + } while (current_limit == 0 && time_before(jiffies, timeout)); + + return current_limit; +} + static int fusb302_set_cc_pull(struct fusb302_chip *chip, bool pull_up, bool pull_down) { @@ -1201,6 +1235,7 @@ static void init_tcpc_dev(struct tcpc_dev *fusb302_tcpc_dev) { fusb302_tcpc_dev->init = tcpm_init; fusb302_tcpc_dev->get_vbus = tcpm_get_vbus; + fusb302_tcpc_dev->get_current_limit = tcpm_get_current_limit; fusb302_tcpc_dev->set_cc = tcpm_set_cc; fusb302_tcpc_dev->get_cc = tcpm_get_cc; fusb302_tcpc_dev->set_polarity = tcpm_set_polarity; @@ -1685,6 +1720,7 @@ static int fusb302_probe(struct i2c_client *client, struct fusb302_chip *chip; struct i2c_adapter *adapter; struct device *dev = &client->dev; + const char *name; int ret = 0; u32 v; @@ -1717,6 +1753,19 @@ static int fusb302_probe(struct i2c_client *client, if (!device_property_read_u32(dev, "fcs,operating-sink-microwatt", &v)) chip->tcpc_config.operating_snk_mw = v / 1000; + /* + * Devicetree platforms should get extcon via phandle (not yet + * supported). On ACPI platforms, we get the name from a device prop. + * This device prop is for kernel internal use only and is expected + * to be set by the platform code which also registers the i2c client + * for the fusb302. + */ + if (device_property_read_string(dev, "fcs,extcon-name", &name) == 0) { + chip->extcon = extcon_get_extcon_dev(name); + if (!chip->extcon) + return -EPROBE_DEFER; + } + ret = fusb302_debugfs_init(chip); if (ret < 0) return ret;
The fusb302 port-controller relies on an external device doing USB2 charger-type detection. The Intel Whiskey Cove PMIC with which the fusb302 is combined on some X86/ACPI platforms already has a charger-type detection driver which uses extcon to communicate the detected charger-type. Rather then inventing a new API for USB2 charger-type detection specifically for use with the tcpm code, this commit simply re-uses the existing extcon API and uses that do USB2 charger detection. Note that the "fcs,extcon-name" property name is only for kernel internal use by X86/ACPI platform code and as such is NOT documented in the fusb302 devicetree bindings. Cc: "Yueyao (Nathan) Zhu" <yueyao@google.com> Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- Changes in v2: -Put extcon code directly in fusb302.c rather then introducing helpers which are only used by fusb302.c Changes in v3: -Improve commit message --- drivers/staging/typec/fusb302/fusb302.c | 49 +++++++++++++++++++++++++++++++++ 1 file changed, 49 insertions(+)