Message ID | 20181115073429.z44czywrf7f65ndb@dcvr (mailing list archive) |
---|---|
State | Rejected, archived |
Delegated to: | Andy Shevchenko |
Headers | show |
Series | platform/x86: thinkpad_acpi: add adaptive_kbd_modes parameter | expand |
Eric Wong <e@80x24.org> wrote: > The above setting with this change and the following keymap > preserves my sanity on the atrocious adaptive keyboard on > the 2nd-gen X1 Carbon: Any comments on this patch? The Esc and F-keys on the keyboard are still numb and I'll be getting rid of the laptop in a few days; but maybe my patch can still be useful to others...
Eric Wong <e@80x24.org> writes: > Eric Wong <e@80x24.org> wrote: >> The above setting with this change and the following keymap >> preserves my sanity on the atrocious adaptive keyboard on >> the 2nd-gen X1 Carbon: > > Any comments on this patch? The Esc and F-keys on the keyboard > are still numb and I'll be getting rid of the laptop in a few > days; but maybe my patch can still be useful to others... I've read through and I like it, FWIW. A brilliant idea. I don't have the hardare to test the patch, though.... But I do wonder if you aren't missing an empty mask protection somewhere? If I read this right, then there is nothing preventing you from writing 0 here: > +static ssize_t adaptive_kbd_modes_store(struct device *dev, > + struct device_attribute *attr, > + const char *buf, size_t count) > +{ > + unsigned long t; > + > + if (parse_strtoul(buf, (1 << LAYFLAT_MODE) - 1, &t)) > + return -EINVAL; > + > + adaptive_kbd_modes = (unsigned int)t; > + return count; > +} And then I believe you have a busy loop here: > @@ -3815,20 +3838,20 @@ static int adaptive_keyboard_set_mode(int new_mode) > > static int adaptive_keyboard_get_next_mode(int mode) > { > - size_t i; > - size_t max_mode = ARRAY_SIZE(adaptive_keyboard_modes) - 1; > - > - for (i = 0; i <= max_mode; i++) { > - if (adaptive_keyboard_modes[i] == mode) > - break; > - } > + int max_mode = fls(adaptive_kbd_modes); > + int new_mode = mode >= max_mode ? HOME_MODE : mode + 1; > > - if (i >= max_mode) > - i = 0; > - else > - i++; > + /* make sure the new mode is allowed by the user */ > + while (!(adaptive_kbd_modes & (1 << new_mode))) { > + new_mode++; > + if (new_mode > max_mode) > + new_mode = HOME_MODE; > > - return adaptive_keyboard_modes[i]; > + /* maybe the user disabled all other modes: */ > + if (new_mode == mode) > + return mode; > + } > + return new_mode; > } Or am I reading this wrong? Bjørn
Bjørn Mork <bjorn@mork.no> wrote: > Eric Wong <e@80x24.org> writes: > > Eric Wong <e@80x24.org> wrote: > >> The above setting with this change and the following keymap > >> preserves my sanity on the atrocious adaptive keyboard on > >> the 2nd-gen X1 Carbon: > > > > Any comments on this patch? The Esc and F-keys on the keyboard > > are still numb and I'll be getting rid of the laptop in a few > > days; but maybe my patch can still be useful to others... > > I've read through and I like it, FWIW. A brilliant idea. I don't have > the hardare to test the patch, though.... Thanks for checking it out. > But I do wonder if you aren't missing an empty mask protection > somewhere? If I read this right, then there is nothing preventing you > from writing 0 here: > > > +static ssize_t adaptive_kbd_modes_store(struct device *dev, > > + struct device_attribute *attr, > > + const char *buf, size_t count) > > +{ > > + unsigned long t; > > + > > + if (parse_strtoul(buf, (1 << LAYFLAT_MODE) - 1, &t)) > > + return -EINVAL; > > + > > + adaptive_kbd_modes = (unsigned int)t; > > + return count; > > +} Right, 0 is allowed; and it will lock the current mode into place... > And then I believe you have a busy loop here: > > > @@ -3815,20 +3838,20 @@ static int adaptive_keyboard_set_mode(int new_mode) > > > > static int adaptive_keyboard_get_next_mode(int mode) > > { > > - size_t i; > > - size_t max_mode = ARRAY_SIZE(adaptive_keyboard_modes) - 1; > > - > > - for (i = 0; i <= max_mode; i++) { > > - if (adaptive_keyboard_modes[i] == mode) > > - break; > > - } > > + int max_mode = fls(adaptive_kbd_modes); > > + int new_mode = mode >= max_mode ? HOME_MODE : mode + 1; > > > > - if (i >= max_mode) > > - i = 0; > > - else > > - i++; > > + /* make sure the new mode is allowed by the user */ > > + while (!(adaptive_kbd_modes & (1 << new_mode))) { > > + new_mode++; > > + if (new_mode > max_mode) > > + new_mode = HOME_MODE; > > > > - return adaptive_keyboard_modes[i]; > > + /* maybe the user disabled all other modes: */ > > + if (new_mode == mode) > > + return mode; > > + } > > + return new_mode; > > } Not a busy loop, since new_mode will reset at HOME_MODE (0) and then it'll hit "new_mode == mode" and remain locked in to the current mode. > Or am I reading this wrong? It seems that way. My initial iteration of this patch did have a busy loop, but I fixed it before publishing :) Thanks again for the review.
Eric Wong <e@80x24.org> writes: > Bjørn Mork <bjorn@mork.no> wrote: > >> And then I believe you have a busy loop here: >> >> > @@ -3815,20 +3838,20 @@ static int adaptive_keyboard_set_mode(int new_mode) >> > >> > static int adaptive_keyboard_get_next_mode(int mode) >> > { >> > - size_t i; >> > - size_t max_mode = ARRAY_SIZE(adaptive_keyboard_modes) - 1; >> > - >> > - for (i = 0; i <= max_mode; i++) { >> > - if (adaptive_keyboard_modes[i] == mode) >> > - break; >> > - } >> > + int max_mode = fls(adaptive_kbd_modes); >> > + int new_mode = mode >= max_mode ? HOME_MODE : mode + 1; >> > >> > - if (i >= max_mode) >> > - i = 0; >> > - else >> > - i++; >> > + /* make sure the new mode is allowed by the user */ >> > + while (!(adaptive_kbd_modes & (1 << new_mode))) { >> > + new_mode++; >> > + if (new_mode > max_mode) >> > + new_mode = HOME_MODE; >> > >> > - return adaptive_keyboard_modes[i]; >> > + /* maybe the user disabled all other modes: */ >> > + if (new_mode == mode) >> > + return mode; >> > + } >> > + return new_mode; >> > } > > Not a busy loop, since new_mode will reset at HOME_MODE (0) > and then it'll hit "new_mode == mode" and remain locked in > to the current mode. Right. I see it now. Thanks for explaining. I guess I was expecting a complete loop bypass ala if (!max_mode) return mode: but your solution will of course work just as fine. Bjørn
diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt index 6cced88de6da..36c8731b6919 100644 --- a/Documentation/laptops/thinkpad-acpi.txt +++ b/Documentation/laptops/thinkpad-acpi.txt @@ -1378,6 +1378,17 @@ For more details about which buttons will appear depending on the mode, please review the laptop's user guide: http://www.lenovo.com/shop/americas/content/user_guides/x1carbon_2_ug_en.pdf +sysfs device attribute: adaptive_kbd_modes + +This bitmap attribute controls the modes the "Fn" key is allowed +to cycle through. The value can be read and set. Enabled bits +correspond to the modes above (that is, the first bit is "Home mode" +and the fourth bit "Function mode"). + +The default value is 9, which allows cycling between Home and Function modes. +Setting and unsetting corresponding bits allows adding or removing modes +to cycle through. + Multiple Commands, Module Parameters ------------------------------------ diff --git a/drivers/platform/x86/thinkpad_acpi.c b/drivers/platform/x86/thinkpad_acpi.c index fde08a997557..77b4f00e0443 100644 --- a/drivers/platform/x86/thinkpad_acpi.c +++ b/drivers/platform/x86/thinkpad_acpi.c @@ -3094,8 +3094,44 @@ static ssize_t adaptive_kbd_mode_store(struct device *dev, static DEVICE_ATTR_RW(adaptive_kbd_mode); +/* Thinkpad X1 Carbon support 5 modes including Home mode, Web browser + * mode, Web conference mode, Function mode and Lay-flat mode. + * We support cycling between Home mode and Function mode by default. + * + * Users may enable and disable other modes by changing the + * adaptive_kbd_modes bitmap attribute + */ +static unsigned adaptive_kbd_modes = + 1 << HOME_MODE | +/* 1 << WEB_BROWSER_MODE | + 1 << WEB_CONFERENCE_MODE | */ + 1 << FUNCTION_MODE; + +static ssize_t adaptive_kbd_modes_show(struct device *dev, + struct device_attribute *attr, + char *buf) +{ + return snprintf(buf, PAGE_SIZE, "%u\n", adaptive_kbd_modes); +} + +static ssize_t adaptive_kbd_modes_store(struct device *dev, + struct device_attribute *attr, + const char *buf, size_t count) +{ + unsigned long t; + + if (parse_strtoul(buf, (1 << LAYFLAT_MODE) - 1, &t)) + return -EINVAL; + + adaptive_kbd_modes = (unsigned int)t; + return count; +} + +static DEVICE_ATTR_RW(adaptive_kbd_modes); + static struct attribute *adaptive_kbd_attributes[] = { &dev_attr_adaptive_kbd_mode.attr, + &dev_attr_adaptive_kbd_modes.attr, NULL }; @@ -3763,20 +3799,7 @@ static int __init hotkey_init(struct ibm_init_struct *iibm) return (res < 0) ? res : 1; } -/* Thinkpad X1 Carbon support 5 modes including Home mode, Web browser - * mode, Web conference mode, Function mode and Lay-flat mode. - * We support Home mode and Function mode currently. - * - * Will consider support rest of modes in future. - * - */ -static const int adaptive_keyboard_modes[] = { - HOME_MODE, -/* WEB_BROWSER_MODE = 2, - WEB_CONFERENCE_MODE = 3, */ - FUNCTION_MODE -}; - +/* Thinkpad X1 Carbon adaptive keyboard */ #define DFR_CHANGE_ROW 0x101 #define DFR_SHOW_QUICKVIEW_ROW 0x102 #define FIRST_ADAPTIVE_KEY 0x103 @@ -3815,20 +3838,20 @@ static int adaptive_keyboard_set_mode(int new_mode) static int adaptive_keyboard_get_next_mode(int mode) { - size_t i; - size_t max_mode = ARRAY_SIZE(adaptive_keyboard_modes) - 1; - - for (i = 0; i <= max_mode; i++) { - if (adaptive_keyboard_modes[i] == mode) - break; - } + int max_mode = fls(adaptive_kbd_modes); + int new_mode = mode >= max_mode ? HOME_MODE : mode + 1; - if (i >= max_mode) - i = 0; - else - i++; + /* make sure the new mode is allowed by the user */ + while (!(adaptive_kbd_modes & (1 << new_mode))) { + new_mode++; + if (new_mode > max_mode) + new_mode = HOME_MODE; - return adaptive_keyboard_modes[i]; + /* maybe the user disabled all other modes: */ + if (new_mode == mode) + return mode; + } + return new_mode; } static bool adaptive_keyboard_hotkey_notify_hotkey(unsigned int scancode) @@ -3848,6 +3871,10 @@ static bool adaptive_keyboard_hotkey_notify_hotkey(unsigned int scancode) return false; new_mode = adaptive_keyboard_get_next_mode( current_mode); + + /* some users may not want cycling */ + if (new_mode == current_mode) + return true; } if (adaptive_keyboard_set_mode(new_mode) < 0)
This bitmap parameter allows the user to add/remove modes for DFR_CHANGE_ROW to cycle through. Users who wish to cycle through WEB_BROWSER_MODE and/or WEB_CONFERENCE_MODE may now do so by enabling corresponding bits. While some appreciate more modes, I made this feature because I wanted to lock the keyboard into FUNCTION_MODE. This is because my Fn key (DFR_CHANGE_ROW) is mapped to Escape, and my "Esc" key is mapped to grave/asciitilde to match the layout of a regular keyboard. The default remains unchanged with the DFR_CHANGE_ROW key toggling between HOME_MODE and FUNCTION_MODE. Thus the default "adaptive_kbd_modes" value is 9, but I use 8: echo 8 >/sys/devices/platform/thinkpad_acpi/adaptive_kbd_modes The above setting with this change and the following keymap preserves my sanity on the atrocious adaptive keyboard on the 2nd-gen X1 Carbon: { echo keymaps 0-255 # Esc key maps to '`' or '~' echo keycode 1 = grave asciitilde # Fn key maps to Escape echo keycode 143 = Escape # Home and End on the keyboard map to Control echo keycode 102 = Control echo keycode 107 = Control } | loadkeys - Or with the following xmodmaprc: remove Control = Control_L remove Lock = Control_L keycode 9 = grave asciitilde grave keycode 110 = Control_L NoSymbol Control_L keycode 115 = Control_L NoSymbol Control_L keycode 151 = Escape NoSymbol Escape add Control = Control_L Signed-off-by: Eric Wong <e@80x24.org> --- Documentation/laptops/thinkpad-acpi.txt | 11 +++++ drivers/platform/x86/thinkpad_acpi.c | 79 ++++++++++++++++++++++----------- 2 files changed, 64 insertions(+), 26 deletions(-)