diff mbox series

[v2,12/12] platform/x86: intel_cht_int33fe: Replacing the old connections with references

Message ID 20190410152505.87041-13-heikki.krogerus@linux.intel.com (mailing list archive)
State Deferred, archived
Headers show
Series Software fwnode references | expand

Commit Message

Heikki Krogerus April 10, 2019, 3:25 p.m. UTC
Now that the software nodes support references, and the
device connection API support parsing fwnode references,
replacing the old connection descriptions with software node
references. Relying on device names when matching the
connection would not have been possible to link the USB
Type-C connector and the DisplayPort connector together, but
with real references it's not problem.

The DisplayPort ACPI node is dag up, and the drivers own
software node for the DisplayPort is set as the secondary
node for it. The USB Type-C connector refers the software
node, but it is now tied to the ACPI node, and therefore any
device entry (struct drm_connector in practice) that the
node combo is assigned to.

The USB role switch device does not have ACPI node, so we
have to wait for the device to appear. Then we can simply
assign our software node for the to the device.

Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
---
 drivers/platform/x86/intel_cht_int33fe.c | 94 +++++++++++++++++++-----
 1 file changed, 77 insertions(+), 17 deletions(-)

Comments

Andy Shevchenko April 11, 2019, 1:30 p.m. UTC | #1
On Wed, Apr 10, 2019 at 6:25 PM Heikki Krogerus
<heikki.krogerus@linux.intel.com> wrote:
>
> Now that the software nodes support references, and the
> device connection API support parsing fwnode references,
> replacing the old connection descriptions with software node
> references. Relying on device names when matching the
> connection would not have been possible to link the USB
> Type-C connector and the DisplayPort connector together, but
> with real references it's not problem.
>
> The DisplayPort ACPI node is dag up, and the drivers own
> software node for the DisplayPort is set as the secondary
> node for it. The USB Type-C connector refers the software
> node, but it is now tied to the ACPI node, and therefore any
> device entry (struct drm_connector in practice) that the
> node combo is assigned to.
>
> The USB role switch device does not have ACPI node, so we
> have to wait for the device to appear. Then we can simply
> assign our software node for the to the device.
>

Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com>

> Signed-off-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> ---
>  drivers/platform/x86/intel_cht_int33fe.c | 94 +++++++++++++++++++-----
>  1 file changed, 77 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/platform/x86/intel_cht_int33fe.c b/drivers/platform/x86/intel_cht_int33fe.c
> index 0687aa23fcfe..8d9f890ec000 100644
> --- a/drivers/platform/x86/intel_cht_int33fe.c
> +++ b/drivers/platform/x86/intel_cht_int33fe.c
> @@ -39,15 +39,22 @@ enum {
>         INT33FE_NODE_MAX,
>  };
>
> +enum {
> +       INT33FE_REF_ORIENTATION,
> +       INT33FE_REF_MODE_MUX,
> +       INT33FE_REF_DISPLAYPORT,
> +       INT33FE_REF_ROLE_SWITCH,
> +       INT33FE_REF_MAX,
> +};
> +
>  struct cht_int33fe_data {
>         struct i2c_client *max17047;
>         struct i2c_client *fusb302;
>         struct i2c_client *pi3usb30532;
> -       /* Contain a list-head must be per device */
> -       struct device_connection connections[4];
>
>         struct fwnode_handle *dp;
>         struct fwnode_handle *node[INT33FE_NODE_MAX];
> +       struct software_node_reference *ref[INT33FE_REF_MAX];
>  };
>
>  /*
> @@ -280,6 +287,65 @@ static int cht_int33fe_add_nodes(struct cht_int33fe_data *data)
>         return ret;
>  }
>
> +static void cht_int33fe_remove_references(struct cht_int33fe_data *data)
> +{
> +       int i;
> +
> +       for (i = 0; i < INT33FE_REF_MAX; i++)
> +               fwnode_remove_software_node_reference(data->ref[i]);
> +}
> +
> +static int cht_int33fe_add_references(struct cht_int33fe_data *data)
> +{
> +       struct fwnode_reference_args args[2] = { };
> +       struct software_node_reference *ref;
> +       struct fwnode_handle *con;
> +
> +       con = data->node[INT33FE_NODE_USB_CONNECTOR];
> +
> +       /* USB Type-C muxes */
> +       args[0].fwnode = data->node[INT33FE_NODE_PI3USB30532];
> +       args[1].fwnode = NULL;
> +
> +       ref = fwnode_create_software_node_reference(con, "orientation-switch",
> +                                                   args);
> +       if (IS_ERR(ref))
> +               return PTR_ERR(ref);
> +       data->ref[INT33FE_REF_ORIENTATION] = ref;
> +
> +       ref = fwnode_create_software_node_reference(con, "mode-switch", args);
> +       if (IS_ERR(ref)) {
> +               cht_int33fe_remove_references(data);
> +               return PTR_ERR(ref);
> +       }
> +       data->ref[INT33FE_REF_MODE_MUX] = ref;
> +
> +       /* USB role switch */
> +       args[0].fwnode = data->node[INT33FE_NODE_ROLE_SWITCH];
> +       args[1].fwnode = NULL;
> +
> +       ref = fwnode_create_software_node_reference(con, "usb-role-switch",
> +                                                   args);
> +       if (IS_ERR(ref)) {
> +               cht_int33fe_remove_references(data);
> +               return PTR_ERR(ref);
> +       }
> +       data->ref[INT33FE_REF_ROLE_SWITCH] = ref;
> +
> +       /* DisplayPort */
> +       args[0].fwnode = data->node[INT33FE_NODE_DISPLAYPORT];
> +       args[1].fwnode = NULL;
> +
> +       ref = fwnode_create_software_node_reference(con, "displayport", args);
> +       if (IS_ERR(ref)) {
> +               cht_int33fe_remove_references(data);
> +               return PTR_ERR(ref);
> +       }
> +       data->ref[INT33FE_REF_DISPLAYPORT] = ref;
> +
> +       return 0;
> +}
> +
>  static int cht_int33fe_probe(struct platform_device *pdev)
>  {
>         struct device *dev = &pdev->dev;
> @@ -348,22 +414,14 @@ static int cht_int33fe_probe(struct platform_device *pdev)
>         if (ret)
>                 return ret;
>
> -       /* Work around BIOS bug, see comment on cht_int33fe_check_for_max17047 */
> -       ret = cht_int33fe_find_max17047(dev, data);
> +       ret = cht_int33fe_add_references(data);
>         if (ret)
>                 goto out_remove_nodes;
>
> -       data->connections[0].endpoint[0] = "port0";
> -       data->connections[0].endpoint[1] = "i2c-pi3usb30532-switch";
> -       data->connections[0].id = "orientation-switch";
> -       data->connections[1].endpoint[0] = "port0";
> -       data->connections[1].endpoint[1] = "i2c-pi3usb30532-mux";
> -       data->connections[1].id = "mode-switch";
> -       data->connections[2].endpoint[0] = "i2c-fusb302";
> -       data->connections[2].endpoint[1] = "intel_xhci_usb_sw-role-switch";
> -       data->connections[2].id = "usb-role-switch";
> -
> -       device_connections_add(data->connections);
> +       /* Work around BIOS bug, see comment on cht_int33fe_check_for_max17047 */
> +       ret = cht_int33fe_find_max17047(dev, data);
> +       if (ret)
> +               goto out_remove_references;
>
>         memset(&board_info, 0, sizeof(board_info));
>         strlcpy(board_info.type, "typec_fusb302", I2C_NAME_SIZE);
> @@ -396,9 +454,11 @@ static int cht_int33fe_probe(struct platform_device *pdev)
>         i2c_unregister_device(data->fusb302);
>
>  out_unregister_max17047:
> -       device_connections_remove(data->connections);
>         i2c_unregister_device(data->max17047);
>
> +out_remove_references:
> +       cht_int33fe_remove_references(data);
> +
>  out_remove_nodes:
>         cht_int33fe_remove_nodes(data);
>
> @@ -413,7 +473,7 @@ static int cht_int33fe_remove(struct platform_device *pdev)
>         i2c_unregister_device(data->fusb302);
>         i2c_unregister_device(data->max17047);
>
> -       device_connections_remove(data->connections);
> +       cht_int33fe_remove_references(data);
>         cht_int33fe_remove_nodes(data);
>
>         return 0;
> --
> 2.20.1
>
diff mbox series

Patch

diff --git a/drivers/platform/x86/intel_cht_int33fe.c b/drivers/platform/x86/intel_cht_int33fe.c
index 0687aa23fcfe..8d9f890ec000 100644
--- a/drivers/platform/x86/intel_cht_int33fe.c
+++ b/drivers/platform/x86/intel_cht_int33fe.c
@@ -39,15 +39,22 @@  enum {
 	INT33FE_NODE_MAX,
 };
 
+enum {
+	INT33FE_REF_ORIENTATION,
+	INT33FE_REF_MODE_MUX,
+	INT33FE_REF_DISPLAYPORT,
+	INT33FE_REF_ROLE_SWITCH,
+	INT33FE_REF_MAX,
+};
+
 struct cht_int33fe_data {
 	struct i2c_client *max17047;
 	struct i2c_client *fusb302;
 	struct i2c_client *pi3usb30532;
-	/* Contain a list-head must be per device */
-	struct device_connection connections[4];
 
 	struct fwnode_handle *dp;
 	struct fwnode_handle *node[INT33FE_NODE_MAX];
+	struct software_node_reference *ref[INT33FE_REF_MAX];
 };
 
 /*
@@ -280,6 +287,65 @@  static int cht_int33fe_add_nodes(struct cht_int33fe_data *data)
 	return ret;
 }
 
+static void cht_int33fe_remove_references(struct cht_int33fe_data *data)
+{
+	int i;
+
+	for (i = 0; i < INT33FE_REF_MAX; i++)
+		fwnode_remove_software_node_reference(data->ref[i]);
+}
+
+static int cht_int33fe_add_references(struct cht_int33fe_data *data)
+{
+	struct fwnode_reference_args args[2] = { };
+	struct software_node_reference *ref;
+	struct fwnode_handle *con;
+
+	con = data->node[INT33FE_NODE_USB_CONNECTOR];
+
+	/* USB Type-C muxes */
+	args[0].fwnode = data->node[INT33FE_NODE_PI3USB30532];
+	args[1].fwnode = NULL;
+
+	ref = fwnode_create_software_node_reference(con, "orientation-switch",
+						    args);
+	if (IS_ERR(ref))
+		return PTR_ERR(ref);
+	data->ref[INT33FE_REF_ORIENTATION] = ref;
+
+	ref = fwnode_create_software_node_reference(con, "mode-switch", args);
+	if (IS_ERR(ref)) {
+		cht_int33fe_remove_references(data);
+		return PTR_ERR(ref);
+	}
+	data->ref[INT33FE_REF_MODE_MUX] = ref;
+
+	/* USB role switch */
+	args[0].fwnode = data->node[INT33FE_NODE_ROLE_SWITCH];
+	args[1].fwnode = NULL;
+
+	ref = fwnode_create_software_node_reference(con, "usb-role-switch",
+						    args);
+	if (IS_ERR(ref)) {
+		cht_int33fe_remove_references(data);
+		return PTR_ERR(ref);
+	}
+	data->ref[INT33FE_REF_ROLE_SWITCH] = ref;
+
+	/* DisplayPort */
+	args[0].fwnode = data->node[INT33FE_NODE_DISPLAYPORT];
+	args[1].fwnode = NULL;
+
+	ref = fwnode_create_software_node_reference(con, "displayport", args);
+	if (IS_ERR(ref)) {
+		cht_int33fe_remove_references(data);
+		return PTR_ERR(ref);
+	}
+	data->ref[INT33FE_REF_DISPLAYPORT] = ref;
+
+	return 0;
+}
+
 static int cht_int33fe_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
@@ -348,22 +414,14 @@  static int cht_int33fe_probe(struct platform_device *pdev)
 	if (ret)
 		return ret;
 
-	/* Work around BIOS bug, see comment on cht_int33fe_check_for_max17047 */
-	ret = cht_int33fe_find_max17047(dev, data);
+	ret = cht_int33fe_add_references(data);
 	if (ret)
 		goto out_remove_nodes;
 
-	data->connections[0].endpoint[0] = "port0";
-	data->connections[0].endpoint[1] = "i2c-pi3usb30532-switch";
-	data->connections[0].id = "orientation-switch";
-	data->connections[1].endpoint[0] = "port0";
-	data->connections[1].endpoint[1] = "i2c-pi3usb30532-mux";
-	data->connections[1].id = "mode-switch";
-	data->connections[2].endpoint[0] = "i2c-fusb302";
-	data->connections[2].endpoint[1] = "intel_xhci_usb_sw-role-switch";
-	data->connections[2].id = "usb-role-switch";
-
-	device_connections_add(data->connections);
+	/* Work around BIOS bug, see comment on cht_int33fe_check_for_max17047 */
+	ret = cht_int33fe_find_max17047(dev, data);
+	if (ret)
+		goto out_remove_references;
 
 	memset(&board_info, 0, sizeof(board_info));
 	strlcpy(board_info.type, "typec_fusb302", I2C_NAME_SIZE);
@@ -396,9 +454,11 @@  static int cht_int33fe_probe(struct platform_device *pdev)
 	i2c_unregister_device(data->fusb302);
 
 out_unregister_max17047:
-	device_connections_remove(data->connections);
 	i2c_unregister_device(data->max17047);
 
+out_remove_references:
+	cht_int33fe_remove_references(data);
+
 out_remove_nodes:
 	cht_int33fe_remove_nodes(data);
 
@@ -413,7 +473,7 @@  static int cht_int33fe_remove(struct platform_device *pdev)
 	i2c_unregister_device(data->fusb302);
 	i2c_unregister_device(data->max17047);
 
-	device_connections_remove(data->connections);
+	cht_int33fe_remove_references(data);
 	cht_int33fe_remove_nodes(data);
 
 	return 0;