@@ -1361,7 +1361,7 @@ static int set_clos_param(int cpu, int clos, int epp, int wt, int min, int max)
ret = isst_pm_get_clos(cpu, clos, &clos_config);
if (ret) {
- perror("isst_pm_get_clos");
+ isst_display_error_info_message(1, "isst_pm_get_clos failed", 0, 0);
return ret;
}
clos_config.clos_min = min;
@@ -1370,7 +1370,7 @@ static int set_clos_param(int cpu, int clos, int epp, int wt, int min, int max)
clos_config.clos_prop_prio = wt;
ret = isst_set_clos(cpu, clos, &clos_config);
if (ret) {
- perror("isst_pm_set_clos");
+ isst_display_error_info_message(1, "isst_set_clos failed", 0, 0);
return ret;
}
@@ -1577,7 +1577,7 @@ static int set_core_priority_and_min(int cpu, int mask_size,
debug_printf("Associate cpu: %d clos: %d\n", i, clos);
ret = isst_clos_associate(i, clos);
if (ret) {
- perror("isst_clos_associate");
+ isst_display_error_info_message(1, "isst_clos_associate failed", 0, 0);
return ret;
}
}
@@ -1593,14 +1593,14 @@ static int set_pbf_core_power(int cpu)
ret = isst_get_ctdp_levels(cpu, &pkg_dev);
if (ret) {
- perror("isst_get_ctdp_levels");
+ debug_printf("isst_get_ctdp_levels failed");
return ret;
}
debug_printf("Current_level: %d\n", pkg_dev.current_level);
ret = isst_get_pbf_info(cpu, pkg_dev.current_level, &pbf_info);
if (ret) {
- perror("isst_get_pbf_info");
+ debug_printf("isst_get_pbf_info failed");
return ret;
}
debug_printf("p1_high: %d p1_low: %d\n", pbf_info.p1_high,
@@ -1610,13 +1610,13 @@ static int set_pbf_core_power(int cpu)
pbf_info.core_cpumask,
pbf_info.p1_high, pbf_info.p1_low);
if (ret) {
- perror("set_core_priority_and_min");
+ debug_printf("set_core_priority_and_min failed");
return ret;
}
ret = isst_pm_qos_config(cpu, 1, 1);
if (ret) {
- perror("isst_pm_qos_config");
+ debug_printf("isst_pm_qos_config failed");
return ret;
}
@@ -1666,7 +1666,7 @@ static void set_pbf_for_cpu(int cpu, void *arg1, void *arg2, void *arg3,
}
if (auto_mode && !status)
- isst_pm_qos_config(cpu, 0, 0);
+ isst_pm_qos_config(cpu, 0, 1);
disp_result:
if (status)
@@ -1933,9 +1933,12 @@ static void enable_clos_qos_config(int cpu, void *arg1, void *arg2, void *arg3,
int ret;
int status = *(int *)arg4;
+ if (is_skx_based_platform())
+ clos_priority_type = 1;
+
ret = isst_pm_qos_config(cpu, status, clos_priority_type);
if (ret)
- perror("isst_pm_qos_config");
+ isst_display_error_info_message(1, "isst_pm_qos_config failed", 0, 0);
if (status)
isst_display_result(cpu, outf, "core-power", "enable",
@@ -1953,9 +1956,11 @@ static void set_clos_enable(int arg)
if (enable) {
fprintf(stderr,
"Enable core-power for a package/die\n");
- fprintf(stderr,
- "\tClos Enable: Specify priority type with [--priority|-p]\n");
- fprintf(stderr, "\t\t 0: Proportional, 1: Ordered\n");
+ if (!is_skx_based_platform()) {
+ fprintf(stderr,
+ "\tClos Enable: Specify priority type with [--priority|-p]\n");
+ fprintf(stderr, "\t\t 0: Proportional, 1: Ordered\n");
+ }
} else {
fprintf(stderr,
"Disable core-power: [No command arguments are required]\n");
@@ -1986,7 +1991,7 @@ static void dump_clos_config_for_cpu(int cpu, void *arg1, void *arg2,
ret = isst_pm_get_clos(cpu, current_clos, &clos_config);
if (ret)
- perror("isst_pm_get_clos");
+ isst_display_error_info_message(1, "isst_pm_get_clos failed", 0, 0);
else
isst_clos_display_information(cpu, outf, current_clos,
&clos_config);
@@ -2002,7 +2007,8 @@ static void dump_clos_config(int arg)
exit(0);
}
if (current_clos < 0 || current_clos > 3) {
- fprintf(stderr, "Invalid clos id\n");
+ isst_display_error_info_message(1, "Invalid clos id\n", 0, 0);
+ isst_ctdp_display_information_end(outf);
exit(0);
}
@@ -2023,7 +2029,7 @@ static void get_clos_info_for_cpu(int cpu, void *arg1, void *arg2, void *arg3,
ret = isst_clos_get_clos_information(cpu, &enable, &prio_type);
if (ret)
- perror("isst_clos_get_info");
+ isst_display_error_info_message(1, "isst_clos_get_info failed", 0, 0);
else {
int cp_state, cp_cap;
@@ -2069,7 +2075,7 @@ static void set_clos_config_for_cpu(int cpu, void *arg1, void *arg2, void *arg3,
clos_config.clos_desired = clos_desired;
ret = isst_set_clos(cpu, current_clos, &clos_config);
if (ret)
- perror("isst_set_clos");
+ isst_display_error_info_message(1, "isst_set_clos failed", 0, 0);
else
isst_display_result(cpu, outf, "core-power", "config", ret);
}
@@ -2081,26 +2087,27 @@ static void set_clos_config(int arg)
"Set core-power configuration for one of the four clos ids\n");
fprintf(stderr,
"\tSpecify targeted clos id with [--clos|-c]\n");
- fprintf(stderr, "\tSpecify clos EPP with [--epp|-e]\n");
- fprintf(stderr,
- "\tSpecify clos Proportional Priority [--weight|-w]\n");
+ if (!is_skx_based_platform()) {
+ fprintf(stderr, "\tSpecify clos EPP with [--epp|-e]\n");
+ fprintf(stderr,
+ "\tSpecify clos Proportional Priority [--weight|-w]\n");
+ }
fprintf(stderr, "\tSpecify clos min in MHz with [--min|-n]\n");
fprintf(stderr, "\tSpecify clos max in MHz with [--max|-m]\n");
- fprintf(stderr, "\tSpecify clos desired in MHz with [--desired|-d]\n");
exit(0);
}
if (current_clos < 0 || current_clos > 3) {
- fprintf(stderr, "Invalid clos id\n");
+ isst_display_error_info_message(1, "Invalid clos id\n", 0, 0);
exit(0);
}
- if (clos_epp < 0 || clos_epp > 0x0F) {
- fprintf(stderr, "clos epp is not specified, default: 0\n");
+ if (!is_skx_based_platform() && (clos_epp < 0 || clos_epp > 0x0F)) {
+ fprintf(stderr, "clos epp is not specified or invalid, default: 0\n");
clos_epp = 0;
}
- if (clos_prop_prio < 0 || clos_prop_prio > 0x0F) {
+ if (!is_skx_based_platform() && (clos_prop_prio < 0 || clos_prop_prio > 0x0F)) {
fprintf(stderr,
- "clos frequency weight is not specified, default: 0\n");
+ "clos frequency weight is not specified or invalid, default: 0\n");
clos_prop_prio = 0;
}
if (clos_min < 0) {
@@ -2108,11 +2115,11 @@ static void set_clos_config(int arg)
clos_min = 0;
}
if (clos_max < 0) {
- fprintf(stderr, "clos max is not specified, default: 25500 MHz\n");
+ fprintf(stderr, "clos max is not specified, default: Max frequency (ratio 0xff)\n");
clos_max = 0xff;
}
- if (clos_desired < 0) {
- fprintf(stderr, "clos desired is not specified, default: 0\n");
+ if (clos_desired) {
+ fprintf(stderr, "clos desired is not supported on this platform\n");
clos_desired = 0x00;
}
@@ -2133,7 +2140,7 @@ static void set_clos_assoc_for_cpu(int cpu, void *arg1, void *arg2, void *arg3,
ret = isst_clos_associate(cpu, current_clos);
if (ret)
- perror("isst_clos_associate");
+ debug_printf("isst_clos_associate failed");
else
isst_display_result(cpu, outf, "core-power", "assoc", ret);
}
@@ -2152,15 +2159,14 @@ static void set_clos_assoc(int arg)
}
if (current_clos < 0 || current_clos > 3) {
- fprintf(stderr, "Invalid clos id\n");
+ isst_display_error_info_message(1, "Invalid clos id\n", 0, 0);
exit(0);
}
if (max_target_cpus)
for_each_online_target_cpu_in_set(set_clos_assoc_for_cpu, NULL,
NULL, NULL, NULL);
else {
- fprintf(stderr,
- "Invalid target cpu. Specify with [-c|--cpu]\n");
+ isst_display_error_info_message(1, "Invalid target cpu. Specify with [-c|--cpu]", 0, 0);
}
}
@@ -2171,7 +2177,7 @@ static void get_clos_assoc_for_cpu(int cpu, void *arg1, void *arg2, void *arg3,
ret = isst_clos_get_assoc_status(cpu, &clos);
if (ret)
- perror("isst_clos_get_assoc_status");
+ isst_display_error_info_message(1, "isst_clos_get_assoc_status failed", 0, 0);
else
isst_clos_display_assoc_information(cpu, outf, clos);
}
@@ -2185,8 +2191,7 @@ static void get_clos_assoc(int arg)
}
if (!max_target_cpus) {
- fprintf(stderr,
- "Invalid target cpu. Specify with [-c|--cpu]\n");
+ isst_display_error_info_message(1, "Invalid target cpu. Specify with [-c|--cpu]", 0, 0);
exit(0);
}
@@ -2366,6 +2371,10 @@ static void parse_cmd_args(int argc, int start, char **argv)
break;
case 'e':
clos_epp = atoi(optarg);
+ if (is_skx_based_platform()) {
+ isst_display_error_info_message(1, "epp can't be specified on this platform", 0, 0);
+ exit(0);
+ }
break;
case 'n':
clos_min = atoi(optarg);
@@ -2377,9 +2386,17 @@ static void parse_cmd_args(int argc, int start, char **argv)
break;
case 'p':
clos_priority_type = atoi(optarg);
+ if (is_skx_based_platform() && !clos_priority_type) {
+ isst_display_error_info_message(1, "Invalid clos priority type: proportional for this platform", 0, 0);
+ exit(0);
+ }
break;
case 'w':
clos_prop_prio = atoi(optarg);
+ if (is_skx_based_platform()) {
+ isst_display_error_info_message(1, "weight can't be specified on this platform", 0, 0);
+ exit(0);
+ }
break;
default:
printf("no match\n");
@@ -917,17 +917,19 @@ int isst_pm_qos_config(int cpu, int enable_clos, int priority_type)
}
ret = isst_write_pm_config(cpu, 0);
if (ret)
- perror("isst_write_pm_config\n");
+ isst_display_error_info_message(0, "WRITE_PM_CONFIG command failed, ignoring error\n", 0, 0);
} else {
ret = isst_write_pm_config(cpu, 1);
if (ret)
- perror("isst_write_pm_config\n");
+ isst_display_error_info_message(0, "WRITE_PM_CONFIG command failed, ignoring error\n", 0, 0);
}
ret = isst_send_mbox_command(cpu, CONFIG_CLOS, CLOS_PM_QOS_CONFIG, 0, 0,
&resp);
- if (ret)
+ if (ret) {
+ isst_display_error_info_message(1, "CLOS_PM_QOS_CONFIG command failed", 0, 0);
return ret;
+ }
debug_printf("cpu:%d CLOS_PM_QOS_CONFIG resp:%x\n", cpu, resp);
@@ -939,7 +941,7 @@ int isst_pm_qos_config(int cpu, int enable_clos, int priority_type)
req = req & ~BIT(1);
if (priority_type > 1)
- fprintf(stderr, "Invalid priority type: Changing type to ordered\n");
+ isst_display_error_info_message(1, "Invalid priority type: Changing type to ordered", 0, 0);
if (priority_type)
req = req | BIT(2);
@@ -599,7 +599,10 @@ void isst_clos_display_information(int cpu, FILE *outf, int clos,
format_and_print(outf, 5, header, value);
snprintf(header, sizeof(header), "clos-max");
- snprintf(value, sizeof(value), "%d MHz", clos_config->clos_max * DISP_FREQ_MULTIPLIER);
+ if (clos_config->clos_max == 0xff)
+ snprintf(value, sizeof(value), "Max Turbo frequency");
+ else
+ snprintf(value, sizeof(value), "%d MHz", clos_config->clos_max * DISP_FREQ_MULTIPLIER);
format_and_print(outf, 5, header, value);
snprintf(header, sizeof(header), "clos-desired");
This change adds improved error display and handling for commands related to core-power feature. The changes include: - Replace perror with helpful error message - Use ordered priority for SKX based platform by default as the proportional priority is not supported - Don't show weight and epp in help and also give error when user tries to set them in SKX based platforms - Range check for epp and weights and display error Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com> --- .../x86/intel-speed-select/isst-config.c | 87 +++++++++++-------- .../power/x86/intel-speed-select/isst-core.c | 10 ++- .../x86/intel-speed-select/isst-display.c | 5 +- 3 files changed, 62 insertions(+), 40 deletions(-)