| Message ID | 20200727080019.286172-1-linus.walleij@linaro.org (mailing list archive) |
|---|---|
| State | Deferred, archived |
| Headers | show |
| Series | x86/platform/geode: Convert LED to GPIO machine descriptor | expand |
On Mon, Jul 27, 2020 at 11:02 AM Linus Walleij <linus.walleij@linaro.org> wrote: > > This makes the machine look up the LED from a GPIO machine > descriptor table. The Geode LEDs should be on the CS5535 > companion chip. Comments (rather nit-picks) below for all three. In any case this version is okay Reviewed-by: Andy Shevchenko <andy.shevchenko@gmail.com> I'm not sure the prefix shouldn't be .../geode: for all of them followed by mentioning the name in the subject line. > Cc: linux-gpio@vger.kernel.org > Cc: Andres Salomon <dilinger@queued.net> > Cc: linux-geode@lists.infradead.org > Cc: Andy Shevchenko <andy@infradead.org> > Cc: Darren Hart <dvhart@infradead.org> > Cc: platform-driver-x86@vger.kernel.org > Signed-off-by: Linus Walleij <linus.walleij@linaro.org> > --- > arch/x86/platform/geode/net5501.c | 13 +++++++++++-- > 1 file changed, 11 insertions(+), 2 deletions(-) > > diff --git a/arch/x86/platform/geode/net5501.c b/arch/x86/platform/geode/net5501.c > index 163e1b545517..d4e6c57b9c87 100644 > --- a/arch/x86/platform/geode/net5501.c > +++ b/arch/x86/platform/geode/net5501.c > @@ -20,6 +20,7 @@ > #include <linux/platform_device.h> > #include <linux/input.h> > #include <linux/gpio_keys.h> > +#include <linux/gpio/machine.h> > > #include <asm/geode.h> > > @@ -55,9 +56,7 @@ static struct platform_device net5501_buttons_dev = { > static struct gpio_led net5501_leds[] = { > { > .name = "net5501:1", > - .gpio = 6, > .default_trigger = "default-on", > - .active_low = 0, > }, > }; > > @@ -66,6 +65,15 @@ static struct gpio_led_platform_data net5501_leds_data = { > .leds = net5501_leds, > }; > > +static struct gpiod_lookup_table net5501_leds_gpio_table = { > + .dev_id = "leds-gpio", > + .table = { > + /* The Geode GPIOs should be on the CS5535 companion chip */ > + GPIO_LOOKUP_IDX("cs5535-gpio", 6, NULL, 0, GPIO_ACTIVE_HIGH), > + { }, It will be good if we don't put commas in the terminator line (to avoid copy'n'paste practice of this). > + }, > +}; ... > static void __init register_net5501(void) > { > /* Setup LED control through leds-gpio driver */ > + gpiod_add_lookup_table(&net5501_leds_gpio_table); > platform_add_devices(net5501_devs, ARRAY_SIZE(net5501_devs)); > } The cleanest way is also to provide an __exitcall function, but I guess it may be too much.
diff --git a/arch/x86/platform/geode/net5501.c b/arch/x86/platform/geode/net5501.c index 163e1b545517..d4e6c57b9c87 100644 --- a/arch/x86/platform/geode/net5501.c +++ b/arch/x86/platform/geode/net5501.c @@ -20,6 +20,7 @@ #include <linux/platform_device.h> #include <linux/input.h> #include <linux/gpio_keys.h> +#include <linux/gpio/machine.h> #include <asm/geode.h> @@ -55,9 +56,7 @@ static struct platform_device net5501_buttons_dev = { static struct gpio_led net5501_leds[] = { { .name = "net5501:1", - .gpio = 6, .default_trigger = "default-on", - .active_low = 0, }, }; @@ -66,6 +65,15 @@ static struct gpio_led_platform_data net5501_leds_data = { .leds = net5501_leds, }; +static struct gpiod_lookup_table net5501_leds_gpio_table = { + .dev_id = "leds-gpio", + .table = { + /* The Geode GPIOs should be on the CS5535 companion chip */ + GPIO_LOOKUP_IDX("cs5535-gpio", 6, NULL, 0, GPIO_ACTIVE_HIGH), + { }, + }, +}; + static struct platform_device net5501_leds_dev = { .name = "leds-gpio", .id = -1, @@ -80,6 +88,7 @@ static struct platform_device *net5501_devs[] __initdata = { static void __init register_net5501(void) { /* Setup LED control through leds-gpio driver */ + gpiod_add_lookup_table(&net5501_leds_gpio_table); platform_add_devices(net5501_devs, ARRAY_SIZE(net5501_devs)); }
This makes the machine look up the LED from a GPIO machine descriptor table. The Geode LEDs should be on the CS5535 companion chip. Cc: linux-gpio@vger.kernel.org Cc: Andres Salomon <dilinger@queued.net> Cc: linux-geode@lists.infradead.org Cc: Andy Shevchenko <andy@infradead.org> Cc: Darren Hart <dvhart@infradead.org> Cc: platform-driver-x86@vger.kernel.org Signed-off-by: Linus Walleij <linus.walleij@linaro.org> --- arch/x86/platform/geode/net5501.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-)