--- linux.orig/arch/x86/include/asm/idtentry.h
+++ linux/arch/x86/include/asm/idtentry.h
@@ -595,10 +595,6 @@ DECLARE_IDTENTRY_SYSVEC(CALL_FUNCTION_VE
 #endif
 
 #ifdef CONFIG_X86_LOCAL_APIC
-# ifdef CONFIG_X86_UV
-DECLARE_IDTENTRY_SYSVEC(UV_BAU_MESSAGE,			sysvec_uv_bau_message);
-# endif
-
 # ifdef CONFIG_X86_MCE_THRESHOLD
 DECLARE_IDTENTRY_SYSVEC(THRESHOLD_APIC_VECTOR,		sysvec_threshold);
 # endif
--- linux.orig/arch/x86/include/asm/uv/uv.h
+++ linux/arch/x86/include/asm/uv/uv.h
@@ -35,10 +35,8 @@ extern int is_uv_hubbed(int uvtype);
 extern void uv_cpu_init(void);
 extern void uv_nmi_init(void);
 extern void uv_system_init(void);
-extern const struct cpumask *uv_flush_tlb_others(const struct cpumask *cpumask,
-						 const struct flush_tlb_info *info);
 
-#else	/* X86_UV */
+#else	/* !X86_UV */
 
 static inline enum uv_system_type get_uv_system_type(void) { return UV_NONE; }
 static inline bool is_early_uv_system(void)	{ return 0; }
--- linux.orig/arch/x86/include/asm/uv/uv_bau.h
+++ /dev/null
@@ -1,755 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * SGI UV Broadcast Assist Unit definitions
- *
- * Copyright (C) 2008-2011 Silicon Graphics, Inc. All rights reserved.
- */
-
-#ifndef _ASM_X86_UV_UV_BAU_H
-#define _ASM_X86_UV_UV_BAU_H
-
-#include <linux/bitmap.h>
-#include <asm/idtentry.h>
-
-#define BITSPERBYTE 8
-
-/*
- * Broadcast Assist Unit messaging structures
- *
- * Selective Broadcast activations are induced by software action
- * specifying a particular 8-descriptor "set" via a 6-bit index written
- * to an MMR.
- * Thus there are 64 unique 512-byte sets of SB descriptors - one set for
- * each 6-bit index value. These descriptor sets are mapped in sequence
- * starting with set 0 located at the address specified in the
- * BAU_SB_DESCRIPTOR_BASE register, set 1 is located at BASE + 512,
- * set 2 is at BASE + 2*512, set 3 at BASE + 3*512, and so on.
- *
- * We will use one set for sending BAU messages from each of the
- * cpu's on the uvhub.
- *
- * TLB shootdown will use the first of the 8 descriptors of each set.
- * Each of the descriptors is 64 bytes in size (8*64 = 512 bytes in a set).
- */
-
-#define MAX_CPUS_PER_UVHUB		128
-#define MAX_CPUS_PER_SOCKET		64
-#define ADP_SZ				64 /* hardware-provided max. */
-#define UV_CPUS_PER_AS			32 /* hardware-provided max. */
-#define ITEMS_PER_DESC			8
-/* the 'throttle' to prevent the hardware stay-busy bug */
-#define MAX_BAU_CONCURRENT		3
-#define UV_ACT_STATUS_MASK		0x3
-#define UV_ACT_STATUS_SIZE		2
-#define UV_DISTRIBUTION_SIZE		256
-#define UV_SW_ACK_NPENDING		8
-#define UV_NET_ENDPOINT_INTD		0x28
-#define UV_PAYLOADQ_GNODE_SHIFT		49
-#define UV_PTC_BASENAME			"sgi_uv/ptc_statistics"
-#define UV_BAU_BASENAME			"sgi_uv/bau_tunables"
-#define UV_BAU_TUNABLES_DIR		"sgi_uv"
-#define UV_BAU_TUNABLES_FILE		"bau_tunables"
-#define WHITESPACE			" \t\n"
-#define cpubit_isset(cpu, bau_local_cpumask) \
-	test_bit((cpu), (bau_local_cpumask).bits)
-
-/* [19:16] SOFT_ACK timeout period  19: 1 is urgency 7  17:16 1 is multiplier */
-/*
- * UV2: Bit 19 selects between
- *  (0): 10 microsecond timebase and
- *  (1): 80 microseconds
- *  we're using 560us
- */
-#define UV_INTD_SOFT_ACK_TIMEOUT_PERIOD	(15UL)
-/* assuming UV3 is the same */
-
-#define BAU_MISC_CONTROL_MULT_MASK	3
-
-#define UVH_AGING_PRESCALE_SEL		0x000000b000UL
-/* [30:28] URGENCY_7  an index into a table of times */
-#define BAU_URGENCY_7_SHIFT		28
-#define BAU_URGENCY_7_MASK		7
-
-#define UVH_TRANSACTION_TIMEOUT		0x000000b200UL
-/* [45:40] BAU - BAU transaction timeout select - a multiplier */
-#define BAU_TRANS_SHIFT			40
-#define BAU_TRANS_MASK			0x3f
-
-/*
- * shorten some awkward names
- */
-#define AS_PUSH_SHIFT UVH_LB_BAU_SB_ACTIVATION_CONTROL_PUSH_SHFT
-#define SOFTACK_MSHIFT UVH_LB_BAU_MISC_CONTROL_ENABLE_INTD_SOFT_ACK_MODE_SHFT
-#define SOFTACK_PSHIFT UVH_LB_BAU_MISC_CONTROL_INTD_SOFT_ACK_TIMEOUT_PERIOD_SHFT
-#define SOFTACK_TIMEOUT_PERIOD UV_INTD_SOFT_ACK_TIMEOUT_PERIOD
-#define PREFETCH_HINT_SHFT UV3H_LB_BAU_MISC_CONTROL_ENABLE_INTD_PREFETCH_HINT_SHFT
-#define SB_STATUS_SHFT UV3H_LB_BAU_MISC_CONTROL_ENABLE_EXTENDED_SB_STATUS_SHFT
-#define write_gmmr	uv_write_global_mmr64
-#define write_lmmr	uv_write_local_mmr
-#define read_lmmr	uv_read_local_mmr
-#define read_gmmr	uv_read_global_mmr64
-
-/*
- * bits in UVH_LB_BAU_SB_ACTIVATION_STATUS_0/1
- */
-#define DS_IDLE				0
-#define DS_ACTIVE			1
-#define DS_DESTINATION_TIMEOUT		2
-#define DS_SOURCE_TIMEOUT		3
-/*
- * bits put together from HRP_LB_BAU_SB_ACTIVATION_STATUS_0/1/2
- * values 1 and 3 will not occur
- *        Decoded meaning              ERROR  BUSY    AUX ERR
- * -------------------------------     ----   -----   -------
- * IDLE                                 0       0        0
- * BUSY (active)                        0       1        0
- * SW Ack Timeout (destination)         1       0        0
- * SW Ack INTD rejected (strong NACK)   1       0        1
- * Source Side Time Out Detected        1       1        0
- * Destination Side PUT Failed          1       1        1
- */
-#define UV2H_DESC_IDLE			0
-#define UV2H_DESC_BUSY			2
-#define UV2H_DESC_DEST_TIMEOUT		4
-#define UV2H_DESC_DEST_STRONG_NACK	5
-#define UV2H_DESC_SOURCE_TIMEOUT	6
-#define UV2H_DESC_DEST_PUT_ERR		7
-
-/*
- * delay for 'plugged' timeout retries, in microseconds
- */
-#define PLUGGED_DELAY			10
-
-/*
- * threshholds at which to use IPI to free resources
- */
-/* after this # consecutive 'plugged' timeouts, use IPI to release resources */
-#define PLUGSB4RESET			100
-/* after this many consecutive timeouts, use IPI to release resources */
-#define TIMEOUTSB4RESET			1
-/* at this number uses of IPI to release resources, giveup the request */
-#define IPI_RESET_LIMIT			1
-/* after this # consecutive successes, bump up the throttle if it was lowered */
-#define COMPLETE_THRESHOLD		5
-/* after this # of giveups (fall back to kernel IPI's) disable the use of
-   the BAU for a period of time */
-#define GIVEUP_LIMIT			100
-
-#define UV_LB_SUBNODEID			0x10
-
-#define UV_SA_SHFT UVH_LB_BAU_MISC_CONTROL_INTD_SOFT_ACK_TIMEOUT_PERIOD_SHFT
-#define UV_SA_MASK UVH_LB_BAU_MISC_CONTROL_INTD_SOFT_ACK_TIMEOUT_PERIOD_MASK
-/* 4 bits of software ack period */
-#define UV2_ACK_MASK			0x7UL
-#define UV2_ACK_UNITS_SHFT		3
-#define UV2_EXT_SHFT UV2H_LB_BAU_MISC_CONTROL_ENABLE_EXTENDED_SB_STATUS_SHFT
-
-/*
- * number of entries in the destination side payload queue
- */
-#define DEST_Q_SIZE			20
-/*
- * number of destination side software ack resources
- */
-#define DEST_NUM_RESOURCES		8
-/*
- * completion statuses for sending a TLB flush message
- */
-#define FLUSH_RETRY_PLUGGED		1
-#define FLUSH_RETRY_TIMEOUT		2
-#define FLUSH_GIVEUP			3
-#define FLUSH_COMPLETE			4
-
-/*
- * tuning the action when the numalink network is extremely delayed
- */
-#define CONGESTED_RESPONSE_US		1000	/* 'long' response time, in
-						   microseconds */
-#define CONGESTED_REPS			10	/* long delays averaged over
-						   this many broadcasts */
-#define DISABLED_PERIOD			10	/* time for the bau to be
-						   disabled, in seconds */
-/* see msg_type: */
-#define MSG_NOOP			0
-#define MSG_REGULAR			1
-#define MSG_RETRY			2
-
-#define BAU_DESC_QUALIFIER		0x534749
-
-enum uv_bau_version {
-	UV_BAU_V2 = 2,
-	UV_BAU_V3,
-	UV_BAU_V4,
-};
-
-/*
- * Distribution: 32 bytes (256 bits) (bytes 0-0x1f of descriptor)
- * If the 'multilevel' flag in the header portion of the descriptor
- * has been set to 0, then endpoint multi-unicast mode is selected.
- * The distribution specification (32 bytes) is interpreted as a 256-bit
- * distribution vector. Adjacent bits correspond to consecutive even numbered
- * nodeIDs. The result of adding the index of a given bit to the 15-bit
- * 'base_dest_nasid' field of the header corresponds to the
- * destination nodeID associated with that specified bit.
- */
-struct pnmask {
-	unsigned long		bits[BITS_TO_LONGS(UV_DISTRIBUTION_SIZE)];
-};
-
-/*
- * mask of cpu's on a uvhub
- * (during initialization we need to check that unsigned long has
- *  enough bits for max. cpu's per uvhub)
- */
-struct bau_local_cpumask {
-	unsigned long		bits;
-};
-
-/*
- * Payload: 16 bytes (128 bits) (bytes 0x20-0x2f of descriptor)
- * only 12 bytes (96 bits) of the payload area are usable.
- * An additional 3 bytes (bits 27:4) of the header address are carried
- * to the next bytes of the destination payload queue.
- * And an additional 2 bytes of the header Suppl_A field are also
- * carried to the destination payload queue.
- * But the first byte of the Suppl_A becomes bits 127:120 (the 16th byte)
- * of the destination payload queue, which is written by the hardware
- * with the s/w ack resource bit vector.
- * [ effective message contents (16 bytes (128 bits) maximum), not counting
- *   the s/w ack bit vector  ]
- */
-
-/**
- * struct uv2_3_bau_msg_payload - defines payload for INTD transactions
- * @address:		Signifies a page or all TLB's of the cpu
- * @sending_cpu:	CPU from which the message originates
- * @acknowledge_count:	CPUs on the destination Hub that received the interrupt
- */
-struct uv2_3_bau_msg_payload {
-	u64 address;
-	u16 sending_cpu;
-	u16 acknowledge_count;
-};
-
-/**
- * struct uv4_bau_msg_payload - defines payload for INTD transactions
- * @address:		Signifies a page or all TLB's of the cpu
- * @sending_cpu:	CPU from which the message originates
- * @acknowledge_count:	CPUs on the destination Hub that received the interrupt
- * @qualifier:		Set by source to verify origin of INTD broadcast
- */
-struct uv4_bau_msg_payload {
-	u64 address;
-	u16 sending_cpu;
-	u16 acknowledge_count;
-	u32 reserved:8;
-	u32 qualifier:24;
-};
-
-/*
- * UV2 Message header:  16 bytes (128 bits) (bytes 0x30-0x3f of descriptor)
- * see figure 9-2 of harp_sys.pdf
- * assuming UV3 is the same
- */
-struct uv2_3_bau_msg_header {
-	unsigned int	base_dest_nasid:15;	/* nasid of the first bit */
-	/* bits 14:0 */				/* in uvhub map */
-	unsigned int	dest_subnodeid:5;	/* must be 0x10, for the LB */
-	/* bits 19:15 */
-	unsigned int	rsvd_1:1;		/* must be zero */
-	/* bit 20 */
-	/* Address bits 59:21 */
-	/* bits 25:2 of address (44:21) are payload */
-	/* these next 24 bits become bytes 12-14 of msg */
-	/* bits 28:21 land in byte 12 */
-	unsigned int	replied_to:1;		/* sent as 0 by the source to
-						   byte 12 */
-	/* bit 21 */
-	unsigned int	msg_type:3;		/* software type of the
-						   message */
-	/* bits 24:22 */
-	unsigned int	canceled:1;		/* message canceled, resource
-						   is to be freed*/
-	/* bit 25 */
-	unsigned int	payload_1:3;		/* not currently used */
-	/* bits 28:26 */
-
-	/* bits 36:29 land in byte 13 */
-	unsigned int	payload_2a:3;		/* not currently used */
-	unsigned int	payload_2b:5;		/* not currently used */
-	/* bits 36:29 */
-
-	/* bits 44:37 land in byte 14 */
-	unsigned int	payload_3:8;		/* not currently used */
-	/* bits 44:37 */
-
-	unsigned int	rsvd_2:7;		/* reserved */
-	/* bits 51:45 */
-	unsigned int	swack_flag:1;		/* software acknowledge flag */
-	/* bit 52 */
-	unsigned int	rsvd_3a:3;		/* must be zero */
-	unsigned int	rsvd_3b:8;		/* must be zero */
-	unsigned int	rsvd_3c:8;		/* must be zero */
-	unsigned int	rsvd_3d:3;		/* must be zero */
-	/* bits 74:53 */
-	unsigned int	fairness:3;		/* usually zero */
-	/* bits 77:75 */
-
-	unsigned int	sequence:16;		/* message sequence number */
-	/* bits 93:78  Suppl_A  */
-	unsigned int	chaining:1;		/* next descriptor is part of
-						   this activation*/
-	/* bit 94 */
-	unsigned int	multilevel:1;		/* multi-level multicast
-						   format */
-	/* bit 95 */
-	unsigned int	rsvd_4:24;		/* ordered / source node /
-						   source subnode / aging
-						   must be zero */
-	/* bits 119:96 */
-	unsigned int	command:8;		/* message type */
-	/* bits 127:120 */
-};
-
-/*
- * The activation descriptor:
- * The format of the message to send, plus all accompanying control
- * Should be 64 bytes
- */
-struct bau_desc {
-	struct pnmask				distribution;
-	/*
-	 * message template, consisting of header and payload:
-	 */
-	union bau_msg_header {
-		struct uv2_3_bau_msg_header	uv2_3_hdr;
-	} header;
-
-	union bau_payload_header {
-		struct uv2_3_bau_msg_payload	uv2_3;
-		struct uv4_bau_msg_payload	uv4;
-	} payload;
-};
-/* UV2:
- *   -payload--    ---------header------
- *   bytes 0-11    bits 70-78  bits 21-44
- *       A           B  (2)      C (3)
- *
- *            A/B/C are moved to:
- *       A            C          B
- *   bytes 0-11  bytes 12-14  bytes 16-17  (byte 15 filled in by hw as vector)
- *   ------------payload queue-----------
- */
-
-/*
- * The payload queue on the destination side is an array of these.
- * With BAU_MISC_CONTROL set for software acknowledge mode, the messages
- * are 32 bytes (2 micropackets) (256 bits) in length, but contain only 17
- * bytes of usable data, including the sw ack vector in byte 15 (bits 127:120)
- * (12 bytes come from bau_msg_payload, 3 from payload_1, 2 from
- *  swack_vec and payload_2)
- * "Enabling Software Acknowledgment mode (see Section 4.3.3 Software
- *  Acknowledge Processing) also selects 32 byte (17 bytes usable) payload
- *  operation."
- */
-struct bau_pq_entry {
-	unsigned long	address;	/* signifies a page or all TLB's
-					   of the cpu */
-	/* 64 bits, bytes 0-7 */
-	unsigned short	sending_cpu;	/* cpu that sent the message */
-	/* 16 bits, bytes 8-9 */
-	unsigned short	acknowledge_count; /* filled in by destination */
-	/* 16 bits, bytes 10-11 */
-	/* these next 3 bytes come from bits 58-81 of the message header */
-	unsigned short	replied_to:1;	/* sent as 0 by the source */
-	unsigned short	msg_type:3;	/* software message type */
-	unsigned short	canceled:1;	/* sent as 0 by the source */
-	unsigned short	unused1:3;	/* not currently using */
-	/* byte 12 */
-	unsigned char	unused2a;	/* not currently using */
-	/* byte 13 */
-	unsigned char	unused2;	/* not currently using */
-	/* byte 14 */
-	unsigned char	swack_vec;	/* filled in by the hardware */
-	/* byte 15 (bits 127:120) */
-	unsigned short	sequence;	/* message sequence number */
-	/* bytes 16-17 */
-	unsigned char	unused4[2];	/* not currently using bytes 18-19 */
-	/* bytes 18-19 */
-	int		number_of_cpus;	/* filled in at destination */
-	/* 32 bits, bytes 20-23 (aligned) */
-	unsigned char	unused5[8];	/* not using */
-	/* bytes 24-31 */
-};
-
-struct msg_desc {
-	struct bau_pq_entry	*msg;
-	int			msg_slot;
-	struct bau_pq_entry	*queue_first;
-	struct bau_pq_entry	*queue_last;
-};
-
-struct reset_args {
-	int			sender;
-};
-
-/*
- * This structure is allocated per_cpu for UV TLB shootdown statistics.
- */
-struct ptc_stats {
-	/* sender statistics */
-	unsigned long	s_giveup;		/* number of fall backs to
-						   IPI-style flushes */
-	unsigned long	s_requestor;		/* number of shootdown
-						   requests */
-	unsigned long	s_stimeout;		/* source side timeouts */
-	unsigned long	s_dtimeout;		/* destination side timeouts */
-	unsigned long	s_strongnacks;		/* number of strong nack's */
-	unsigned long	s_time;			/* time spent in sending side */
-	unsigned long	s_retriesok;		/* successful retries */
-	unsigned long	s_ntargcpu;		/* total number of cpu's
-						   targeted */
-	unsigned long	s_ntargself;		/* times the sending cpu was
-						   targeted */
-	unsigned long	s_ntarglocals;		/* targets of cpus on the local
-						   blade */
-	unsigned long	s_ntargremotes;		/* targets of cpus on remote
-						   blades */
-	unsigned long	s_ntarglocaluvhub;	/* targets of the local hub */
-	unsigned long	s_ntargremoteuvhub;	/* remotes hubs targeted */
-	unsigned long	s_ntarguvhub;		/* total number of uvhubs
-						   targeted */
-	unsigned long	s_ntarguvhub16;		/* number of times target
-						   hubs >= 16*/
-	unsigned long	s_ntarguvhub8;		/* number of times target
-						   hubs >= 8 */
-	unsigned long	s_ntarguvhub4;		/* number of times target
-						   hubs >= 4 */
-	unsigned long	s_ntarguvhub2;		/* number of times target
-						   hubs >= 2 */
-	unsigned long	s_ntarguvhub1;		/* number of times target
-						   hubs == 1 */
-	unsigned long	s_resets_plug;		/* ipi-style resets from plug
-						   state */
-	unsigned long	s_resets_timeout;	/* ipi-style resets from
-						   timeouts */
-	unsigned long	s_busy;			/* status stayed busy past
-						   s/w timer */
-	unsigned long	s_throttles;		/* waits in throttle */
-	unsigned long	s_retry_messages;	/* retry broadcasts */
-	unsigned long	s_bau_reenabled;	/* for bau enable/disable */
-	unsigned long	s_bau_disabled;		/* for bau enable/disable */
-	unsigned long	s_uv2_wars;		/* uv2 workaround, perm. busy */
-	unsigned long	s_uv2_wars_hw;		/* uv2 workaround, hiwater */
-	unsigned long	s_uv2_war_waits;	/* uv2 workaround, long waits */
-	unsigned long	s_overipilimit;		/* over the ipi reset limit */
-	unsigned long	s_giveuplimit;		/* disables, over giveup limit*/
-	unsigned long	s_enters;		/* entries to the driver */
-	unsigned long	s_ipifordisabled;	/* fall back to IPI; disabled */
-	unsigned long	s_plugged;		/* plugged by h/w bug*/
-	unsigned long	s_congested;		/* giveup on long wait */
-	/* destination statistics */
-	unsigned long	d_alltlb;		/* times all tlb's on this
-						   cpu were flushed */
-	unsigned long	d_onetlb;		/* times just one tlb on this
-						   cpu was flushed */
-	unsigned long	d_multmsg;		/* interrupts with multiple
-						   messages */
-	unsigned long	d_nomsg;		/* interrupts with no message */
-	unsigned long	d_time;			/* time spent on destination
-						   side */
-	unsigned long	d_requestee;		/* number of messages
-						   processed */
-	unsigned long	d_retries;		/* number of retry messages
-						   processed */
-	unsigned long	d_canceled;		/* number of messages canceled
-						   by retries */
-	unsigned long	d_nocanceled;		/* retries that found nothing
-						   to cancel */
-	unsigned long	d_resets;		/* number of ipi-style requests
-						   processed */
-	unsigned long	d_rcanceled;		/* number of messages canceled
-						   by resets */
-};
-
-struct tunables {
-	int			*tunp;
-	int			deflt;
-};
-
-struct hub_and_pnode {
-	short			uvhub;
-	short			pnode;
-};
-
-struct socket_desc {
-	short			num_cpus;
-	short			cpu_number[MAX_CPUS_PER_SOCKET];
-};
-
-struct uvhub_desc {
-	unsigned short		socket_mask;
-	short			num_cpus;
-	short			uvhub;
-	short			pnode;
-	struct socket_desc	socket[2];
-};
-
-/**
- * struct bau_control
- * @status_mmr: location of status mmr, determined by uvhub_cpu
- * @status_index: index of ERR|BUSY bits in status mmr, determined by uvhub_cpu
- *
- * Per-cpu control struct containing CPU topology information and BAU tuneables.
- */
-struct bau_control {
-	struct bau_desc		*descriptor_base;
-	struct bau_pq_entry	*queue_first;
-	struct bau_pq_entry	*queue_last;
-	struct bau_pq_entry	*bau_msg_head;
-	struct bau_control	*uvhub_master;
-	struct bau_control	*socket_master;
-	struct ptc_stats	*statp;
-	cpumask_t		*cpumask;
-	unsigned long		timeout_interval;
-	unsigned long		set_bau_on_time;
-	atomic_t		active_descriptor_count;
-	int			plugged_tries;
-	int			timeout_tries;
-	int			ipi_attempts;
-	int			conseccompletes;
-	u64			status_mmr;
-	int			status_index;
-	bool			nobau;
-	short			baudisabled;
-	short			cpu;
-	short			osnode;
-	short			uvhub_cpu;
-	short			uvhub;
-	short			uvhub_version;
-	short			cpus_in_socket;
-	short			cpus_in_uvhub;
-	short			partition_base_pnode;
-	short			busy;       /* all were busy (war) */
-	unsigned short		message_number;
-	unsigned short		uvhub_quiesce;
-	short			socket_acknowledge_count[DEST_Q_SIZE];
-	cycles_t		send_message;
-	cycles_t		period_end;
-	cycles_t		period_time;
-	spinlock_t		uvhub_lock;
-	spinlock_t		queue_lock;
-	spinlock_t		disable_lock;
-	/* tunables */
-	int			max_concurr;
-	int			max_concurr_const;
-	int			plugged_delay;
-	int			plugsb4reset;
-	int			timeoutsb4reset;
-	int			ipi_reset_limit;
-	int			complete_threshold;
-	int			cong_response_us;
-	int			cong_reps;
-	cycles_t		disabled_period;
-	int			period_giveups;
-	int			giveup_limit;
-	long			period_requests;
-	struct hub_and_pnode	*thp;
-};
-
-/* Abstracted BAU functions */
-struct bau_operations {
-	unsigned long	(*read_l_sw_ack)(void);
-	unsigned long	(*read_g_sw_ack)(int pnode);
-	unsigned long	(*bau_gpa_to_offset)(unsigned long vaddr);
-	void		(*write_l_sw_ack)(unsigned long mmr);
-	void		(*write_g_sw_ack)(int pnode, unsigned long mmr);
-	void		(*write_payload_first)(int pnode, unsigned long mmr);
-	void		(*write_payload_last)(int pnode, unsigned long mmr);
-	int		(*wait_completion)(struct bau_desc*,
-				struct bau_control*, long try);
-};
-
-static inline void write_mmr_data_broadcast(int pnode, unsigned long mmr_image)
-{
-	write_gmmr(pnode, UVH_BAU_DATA_BROADCAST, mmr_image);
-}
-
-static inline void write_mmr_descriptor_base(int pnode, unsigned long mmr_image)
-{
-	write_gmmr(pnode, UVH_LB_BAU_SB_DESCRIPTOR_BASE, mmr_image);
-}
-
-static inline void write_mmr_activation(unsigned long index)
-{
-	write_lmmr(UVH_LB_BAU_SB_ACTIVATION_CONTROL, index);
-}
-
-static inline void write_gmmr_activation(int pnode, unsigned long mmr_image)
-{
-	write_gmmr(pnode, UVH_LB_BAU_SB_ACTIVATION_CONTROL, mmr_image);
-}
-
-static inline void write_mmr_proc_payload_first(int pnode, unsigned long mmr_image)
-{
-	write_gmmr(pnode, UV4H_LB_PROC_INTD_QUEUE_FIRST, mmr_image);
-}
-
-static inline void write_mmr_proc_payload_last(int pnode, unsigned long mmr_image)
-{
-	write_gmmr(pnode, UV4H_LB_PROC_INTD_QUEUE_LAST, mmr_image);
-}
-
-static inline void write_mmr_payload_first(int pnode, unsigned long mmr_image)
-{
-	write_gmmr(pnode, UVH_LB_BAU_INTD_PAYLOAD_QUEUE_FIRST, mmr_image);
-}
-
-static inline void write_mmr_payload_tail(int pnode, unsigned long mmr_image)
-{
-	write_gmmr(pnode, UVH_LB_BAU_INTD_PAYLOAD_QUEUE_TAIL, mmr_image);
-}
-
-static inline void write_mmr_payload_last(int pnode, unsigned long mmr_image)
-{
-	write_gmmr(pnode, UVH_LB_BAU_INTD_PAYLOAD_QUEUE_LAST, mmr_image);
-}
-
-static inline void write_mmr_misc_control(int pnode, unsigned long mmr_image)
-{
-	write_gmmr(pnode, UVH_LB_BAU_MISC_CONTROL, mmr_image);
-}
-
-static inline unsigned long read_mmr_misc_control(int pnode)
-{
-	return read_gmmr(pnode, UVH_LB_BAU_MISC_CONTROL);
-}
-
-static inline void write_mmr_sw_ack(unsigned long mr)
-{
-	uv_write_local_mmr(UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS, mr);
-}
-
-static inline void write_gmmr_sw_ack(int pnode, unsigned long mr)
-{
-	write_gmmr(pnode, UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE_ALIAS, mr);
-}
-
-static inline unsigned long read_mmr_sw_ack(void)
-{
-	return read_lmmr(UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE);
-}
-
-static inline unsigned long read_gmmr_sw_ack(int pnode)
-{
-	return read_gmmr(pnode, UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE);
-}
-
-static inline void write_mmr_proc_sw_ack(unsigned long mr)
-{
-	uv_write_local_mmr(UV4H_LB_PROC_INTD_SOFT_ACK_CLEAR, mr);
-}
-
-static inline void write_gmmr_proc_sw_ack(int pnode, unsigned long mr)
-{
-	write_gmmr(pnode, UV4H_LB_PROC_INTD_SOFT_ACK_CLEAR, mr);
-}
-
-static inline unsigned long read_mmr_proc_sw_ack(void)
-{
-	return read_lmmr(UV4H_LB_PROC_INTD_SOFT_ACK_PENDING);
-}
-
-static inline unsigned long read_gmmr_proc_sw_ack(int pnode)
-{
-	return read_gmmr(pnode, UV4H_LB_PROC_INTD_SOFT_ACK_PENDING);
-}
-
-static inline void write_mmr_data_config(int pnode, unsigned long mr)
-{
-	uv_write_global_mmr64(pnode, UVH_BAU_DATA_CONFIG, mr);
-}
-
-static inline int bau_uvhub_isset(int uvhub, struct pnmask *dstp)
-{
-	return constant_test_bit(uvhub, &dstp->bits[0]);
-}
-static inline void bau_uvhub_set(int pnode, struct pnmask *dstp)
-{
-	__set_bit(pnode, &dstp->bits[0]);
-}
-static inline void bau_uvhubs_clear(struct pnmask *dstp,
-				    int nbits)
-{
-	bitmap_zero(&dstp->bits[0], nbits);
-}
-static inline int bau_uvhub_weight(struct pnmask *dstp)
-{
-	return bitmap_weight((unsigned long *)&dstp->bits[0],
-				UV_DISTRIBUTION_SIZE);
-}
-
-static inline void bau_cpubits_clear(struct bau_local_cpumask *dstp, int nbits)
-{
-	bitmap_zero(&dstp->bits, nbits);
-}
-
-struct atomic_short {
-	short counter;
-};
-
-/*
- * atomic_read_short - read a short atomic variable
- * @v: pointer of type atomic_short
- *
- * Atomically reads the value of @v.
- */
-static inline int atomic_read_short(const struct atomic_short *v)
-{
-	return v->counter;
-}
-
-/*
- * atom_asr - add and return a short int
- * @i: short value to add
- * @v: pointer of type atomic_short
- *
- * Atomically adds @i to @v and returns @i + @v
- */
-static inline int atom_asr(short i, struct atomic_short *v)
-{
-	short __i = i;
-	asm volatile(LOCK_PREFIX "xaddw %0, %1"
-			: "+r" (i), "+m" (v->counter)
-			: : "memory");
-	return i + __i;
-}
-
-/*
- * conditionally add 1 to *v, unless *v is >= u
- * return 0 if we cannot add 1 to *v because it is >= u
- * return 1 if we can add 1 to *v because it is < u
- * the add is atomic
- *
- * This is close to atomic_add_unless(), but this allows the 'u' value
- * to be lowered below the current 'v'.  atomic_add_unless can only stop
- * on equal.
- */
-static inline int atomic_inc_unless_ge(spinlock_t *lock, atomic_t *v, int u)
-{
-	spin_lock(lock);
-	if (atomic_read(v) >= u) {
-		spin_unlock(lock);
-		return 0;
-	}
-	atomic_inc(v);
-	spin_unlock(lock);
-	return 1;
-}
-
-void uv_bau_message_interrupt(struct pt_regs *regs);
-
-#endif /* _ASM_X86_UV_UV_BAU_H */
--- linux.orig/arch/x86/kernel/idt.c
+++ linux/arch/x86/kernel/idt.c
@@ -149,9 +149,6 @@ static const __initconst struct idt_data
 # ifdef CONFIG_IRQ_WORK
 	INTG(IRQ_WORK_VECTOR,			asm_sysvec_irq_work),
 # endif
-# ifdef CONFIG_X86_UV
-	INTG(UV_BAU_MESSAGE,			asm_sysvec_uv_bau_message),
-# endif
 	INTG(SPURIOUS_APIC_VECTOR,		asm_sysvec_spurious_apic_interrupt),
 	INTG(ERROR_APIC_VECTOR,			asm_sysvec_error_interrupt),
 #endif
--- linux.orig/arch/x86/mm/tlb.c
+++ linux/arch/x86/mm/tlb.c
@@ -14,7 +14,6 @@
 #include <asm/nospec-branch.h>
 #include <asm/cache.h>
 #include <asm/apic.h>
-#include <asm/uv/uv.h>
 
 #include "mm_internal.h"
 
@@ -809,29 +808,6 @@ STATIC_NOPV void native_flush_tlb_others
 		trace_tlb_flush(TLB_REMOTE_SEND_IPI,
 				(info->end - info->start) >> PAGE_SHIFT);
 
-	if (is_uv_system()) {
-		/*
-		 * This whole special case is confused.  UV has a "Broadcast
-		 * Assist Unit", which seems to be a fancy way to send IPIs.
-		 * Back when x86 used an explicit TLB flush IPI, UV was
-		 * optimized to use its own mechanism.  These days, x86 uses
-		 * smp_call_function_many(), but UV still uses a manual IPI,
-		 * and that IPI's action is out of date -- it does a manual
-		 * flush instead of calling flush_tlb_func_remote().  This
-		 * means that the percpu tlb_gen variables won't be updated
-		 * and we'll do pointless flushes on future context switches.
-		 *
-		 * Rather than hooking native_flush_tlb_others() here, I think
-		 * that UV should be updated so that smp_call_function_many(),
-		 * etc, are optimal on UV.
-		 */
-		cpumask = uv_flush_tlb_others(cpumask, info);
-		if (cpumask)
-			smp_call_function_many(cpumask, flush_tlb_func_remote,
-					       (void *)info, 1);
-		return;
-	}
-
 	/*
 	 * If no page tables were freed, we can skip sending IPIs to
 	 * CPUs in lazy TLB mode. They will flush the CPU themselves
--- linux.orig/arch/x86/platform/uv/Makefile
+++ linux/arch/x86/platform/uv/Makefile
@@ -1,2 +1,2 @@
 # SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_X86_UV)		+= tlb_uv.o bios_uv.o uv_irq.o uv_sysfs.o uv_time.o uv_nmi.o
+obj-$(CONFIG_X86_UV)		+= bios_uv.o uv_irq.o uv_sysfs.o uv_time.o uv_nmi.o
--- linux.orig/arch/x86/platform/uv/tlb_uv.c
+++ /dev/null
@@ -1,2097 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-or-later
-/*
- *	SGI UltraViolet TLB flush routines.
- *
- *	(c) 2008-2014 Cliff Wickman <cpw@sgi.com>, SGI.
- */
-#include <linux/seq_file.h>
-#include <linux/proc_fs.h>
-#include <linux/debugfs.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/delay.h>
-
-#include <asm/mmu_context.h>
-#include <asm/uv/uv.h>
-#include <asm/uv/uv_mmrs.h>
-#include <asm/uv/uv_hub.h>
-#include <asm/uv/uv_bau.h>
-#include <asm/apic.h>
-#include <asm/tsc.h>
-#include <asm/irq_vectors.h>
-#include <asm/timer.h>
-
-static struct bau_operations ops __ro_after_init;
-
-static int timeout_us;
-static bool nobau = true;
-static int nobau_perm;
-
-/* tunables: */
-static int max_concurr		= MAX_BAU_CONCURRENT;
-static int max_concurr_const	= MAX_BAU_CONCURRENT;
-static int plugged_delay	= PLUGGED_DELAY;
-static int plugsb4reset		= PLUGSB4RESET;
-static int giveup_limit		= GIVEUP_LIMIT;
-static int timeoutsb4reset	= TIMEOUTSB4RESET;
-static int ipi_reset_limit	= IPI_RESET_LIMIT;
-static int complete_threshold	= COMPLETE_THRESHOLD;
-static int congested_respns_us	= CONGESTED_RESPONSE_US;
-static int congested_reps	= CONGESTED_REPS;
-static int disabled_period	= DISABLED_PERIOD;
-
-static struct tunables tunables[] = {
-	{&max_concurr,           MAX_BAU_CONCURRENT}, /* must be [0] */
-	{&plugged_delay,         PLUGGED_DELAY},
-	{&plugsb4reset,          PLUGSB4RESET},
-	{&timeoutsb4reset,       TIMEOUTSB4RESET},
-	{&ipi_reset_limit,       IPI_RESET_LIMIT},
-	{&complete_threshold,    COMPLETE_THRESHOLD},
-	{&congested_respns_us,   CONGESTED_RESPONSE_US},
-	{&congested_reps,        CONGESTED_REPS},
-	{&disabled_period,       DISABLED_PERIOD},
-	{&giveup_limit,          GIVEUP_LIMIT}
-};
-
-static struct dentry *tunables_dir;
-
-/* these correspond to the statistics printed by ptc_seq_show() */
-static char *stat_description[] = {
-	"sent:     number of shootdown messages sent",
-	"stime:    time spent sending messages",
-	"numuvhubs: number of hubs targeted with shootdown",
-	"numuvhubs16: number times 16 or more hubs targeted",
-	"numuvhubs8: number times 8 or more hubs targeted",
-	"numuvhubs4: number times 4 or more hubs targeted",
-	"numuvhubs2: number times 2 or more hubs targeted",
-	"numuvhubs1: number times 1 hub targeted",
-	"numcpus:  number of cpus targeted with shootdown",
-	"dto:      number of destination timeouts",
-	"retries:  destination timeout retries sent",
-	"rok:   :  destination timeouts successfully retried",
-	"resetp:   ipi-style resource resets for plugs",
-	"resett:   ipi-style resource resets for timeouts",
-	"giveup:   fall-backs to ipi-style shootdowns",
-	"sto:      number of source timeouts",
-	"bz:       number of stay-busy's",
-	"throt:    number times spun in throttle",
-	"swack:   image of UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE",
-	"recv:     shootdown messages received",
-	"rtime:    time spent processing messages",
-	"all:      shootdown all-tlb messages",
-	"one:      shootdown one-tlb messages",
-	"mult:     interrupts that found multiple messages",
-	"none:     interrupts that found no messages",
-	"retry:    number of retry messages processed",
-	"canc:     number messages canceled by retries",
-	"nocan:    number retries that found nothing to cancel",
-	"reset:    number of ipi-style reset requests processed",
-	"rcan:     number messages canceled by reset requests",
-	"disable:  number times use of the BAU was disabled",
-	"enable:   number times use of the BAU was re-enabled"
-};
-
-static int __init setup_bau(char *arg)
-{
-	int result;
-
-	if (!arg)
-		return -EINVAL;
-
-	result = strtobool(arg, &nobau);
-	if (result)
-		return result;
-
-	/* we need to flip the logic here, so that bau=y sets nobau to false */
-	nobau = !nobau;
-
-	if (!nobau)
-		pr_info("UV BAU Enabled\n");
-	else
-		pr_info("UV BAU Disabled\n");
-
-	return 0;
-}
-early_param("bau", setup_bau);
-
-/* base pnode in this partition */
-static int uv_base_pnode __read_mostly;
-
-static DEFINE_PER_CPU(struct ptc_stats, ptcstats);
-static DEFINE_PER_CPU(struct bau_control, bau_control);
-static DEFINE_PER_CPU(cpumask_var_t, uv_flush_tlb_mask);
-
-static void
-set_bau_on(void)
-{
-	int cpu;
-	struct bau_control *bcp;
-
-	if (nobau_perm) {
-		pr_info("BAU not initialized; cannot be turned on\n");
-		return;
-	}
-	nobau = false;
-	for_each_present_cpu(cpu) {
-		bcp = &per_cpu(bau_control, cpu);
-		bcp->nobau = false;
-	}
-	pr_info("BAU turned on\n");
-	return;
-}
-
-static void
-set_bau_off(void)
-{
-	int cpu;
-	struct bau_control *bcp;
-
-	nobau = true;
-	for_each_present_cpu(cpu) {
-		bcp = &per_cpu(bau_control, cpu);
-		bcp->nobau = true;
-	}
-	pr_info("BAU turned off\n");
-	return;
-}
-
-/*
- * Determine the first node on a uvhub. 'Nodes' are used for kernel
- * memory allocation.
- */
-static int __init uvhub_to_first_node(int uvhub)
-{
-	int node, b;
-
-	for_each_online_node(node) {
-		b = uv_node_to_blade_id(node);
-		if (uvhub == b)
-			return node;
-	}
-	return -1;
-}
-
-/*
- * Determine the apicid of the first cpu on a uvhub.
- */
-static int __init uvhub_to_first_apicid(int uvhub)
-{
-	int cpu;
-
-	for_each_present_cpu(cpu)
-		if (uvhub == uv_cpu_to_blade_id(cpu))
-			return per_cpu(x86_cpu_to_apicid, cpu);
-	return -1;
-}
-
-/*
- * Free a software acknowledge hardware resource by clearing its Pending
- * bit. This will return a reply to the sender.
- * If the message has timed out, a reply has already been sent by the
- * hardware but the resource has not been released. In that case our
- * clear of the Timeout bit (as well) will free the resource. No reply will
- * be sent (the hardware will only do one reply per message).
- */
-static void reply_to_message(struct msg_desc *mdp, struct bau_control *bcp,
-						int do_acknowledge)
-{
-	unsigned long dw;
-	struct bau_pq_entry *msg;
-
-	msg = mdp->msg;
-	if (!msg->canceled && do_acknowledge) {
-		dw = (msg->swack_vec << UV_SW_ACK_NPENDING) | msg->swack_vec;
-		ops.write_l_sw_ack(dw);
-	}
-	msg->replied_to = 1;
-	msg->swack_vec = 0;
-}
-
-/*
- * Process the receipt of a RETRY message
- */
-static void bau_process_retry_msg(struct msg_desc *mdp,
-					struct bau_control *bcp)
-{
-	int i;
-	int cancel_count = 0;
-	unsigned long msg_res;
-	unsigned long mmr = 0;
-	struct bau_pq_entry *msg = mdp->msg;
-	struct bau_pq_entry *msg2;
-	struct ptc_stats *stat = bcp->statp;
-
-	stat->d_retries++;
-	/*
-	 * cancel any message from msg+1 to the retry itself
-	 */
-	for (msg2 = msg+1, i = 0; i < DEST_Q_SIZE; msg2++, i++) {
-		if (msg2 > mdp->queue_last)
-			msg2 = mdp->queue_first;
-		if (msg2 == msg)
-			break;
-
-		/* same conditions for cancellation as do_reset */
-		if ((msg2->replied_to == 0) && (msg2->canceled == 0) &&
-		    (msg2->swack_vec) && ((msg2->swack_vec &
-			msg->swack_vec) == 0) &&
-		    (msg2->sending_cpu == msg->sending_cpu) &&
-		    (msg2->msg_type != MSG_NOOP)) {
-			mmr = ops.read_l_sw_ack();
-			msg_res = msg2->swack_vec;
-			/*
-			 * This is a message retry; clear the resources held
-			 * by the previous message only if they timed out.
-			 * If it has not timed out we have an unexpected
-			 * situation to report.
-			 */
-			if (mmr & (msg_res << UV_SW_ACK_NPENDING)) {
-				unsigned long mr;
-				/*
-				 * Is the resource timed out?
-				 * Make everyone ignore the cancelled message.
-				 */
-				msg2->canceled = 1;
-				stat->d_canceled++;
-				cancel_count++;
-				mr = (msg_res << UV_SW_ACK_NPENDING) | msg_res;
-				ops.write_l_sw_ack(mr);
-			}
-		}
-	}
-	if (!cancel_count)
-		stat->d_nocanceled++;
-}
-
-/*
- * Do all the things a cpu should do for a TLB shootdown message.
- * Other cpu's may come here at the same time for this message.
- */
-static void bau_process_message(struct msg_desc *mdp, struct bau_control *bcp,
-						int do_acknowledge)
-{
-	short socket_ack_count = 0;
-	short *sp;
-	struct atomic_short *asp;
-	struct ptc_stats *stat = bcp->statp;
-	struct bau_pq_entry *msg = mdp->msg;
-	struct bau_control *smaster = bcp->socket_master;
-
-	/*
-	 * This must be a normal message, or retry of a normal message
-	 */
-	if (msg->address == TLB_FLUSH_ALL) {
-		flush_tlb_local();
-		stat->d_alltlb++;
-	} else {
-		flush_tlb_one_user(msg->address);
-		stat->d_onetlb++;
-	}
-	stat->d_requestee++;
-
-	/*
-	 * One cpu on each uvhub has the additional job on a RETRY
-	 * of releasing the resource held by the message that is
-	 * being retried.  That message is identified by sending
-	 * cpu number.
-	 */
-	if (msg->msg_type == MSG_RETRY && bcp == bcp->uvhub_master)
-		bau_process_retry_msg(mdp, bcp);
-
-	/*
-	 * This is a swack message, so we have to reply to it.
-	 * Count each responding cpu on the socket. This avoids
-	 * pinging the count's cache line back and forth between
-	 * the sockets.
-	 */
-	sp = &smaster->socket_acknowledge_count[mdp->msg_slot];
-	asp = (struct atomic_short *)sp;
-	socket_ack_count = atom_asr(1, asp);
-	if (socket_ack_count == bcp->cpus_in_socket) {
-		int msg_ack_count;
-		/*
-		 * Both sockets dump their completed count total into
-		 * the message's count.
-		 */
-		*sp = 0;
-		asp = (struct atomic_short *)&msg->acknowledge_count;
-		msg_ack_count = atom_asr(socket_ack_count, asp);
-
-		if (msg_ack_count == bcp->cpus_in_uvhub) {
-			/*
-			 * All cpus in uvhub saw it; reply
-			 * (unless we are in the UV2 workaround)
-			 */
-			reply_to_message(mdp, bcp, do_acknowledge);
-		}
-	}
-
-	return;
-}
-
-/*
- * Determine the first cpu on a pnode.
- */
-static int pnode_to_first_cpu(int pnode, struct bau_control *smaster)
-{
-	int cpu;
-	struct hub_and_pnode *hpp;
-
-	for_each_present_cpu(cpu) {
-		hpp = &smaster->thp[cpu];
-		if (pnode == hpp->pnode)
-			return cpu;
-	}
-	return -1;
-}
-
-/*
- * Last resort when we get a large number of destination timeouts is
- * to clear resources held by a given cpu.
- * Do this with IPI so that all messages in the BAU message queue
- * can be identified by their nonzero swack_vec field.
- *
- * This is entered for a single cpu on the uvhub.
- * The sender want's this uvhub to free a specific message's
- * swack resources.
- */
-static void do_reset(void *ptr)
-{
-	int i;
-	struct bau_control *bcp = &per_cpu(bau_control, smp_processor_id());
-	struct reset_args *rap = (struct reset_args *)ptr;
-	struct bau_pq_entry *msg;
-	struct ptc_stats *stat = bcp->statp;
-
-	stat->d_resets++;
-	/*
-	 * We're looking for the given sender, and
-	 * will free its swack resource.
-	 * If all cpu's finally responded after the timeout, its
-	 * message 'replied_to' was set.
-	 */
-	for (msg = bcp->queue_first, i = 0; i < DEST_Q_SIZE; msg++, i++) {
-		unsigned long msg_res;
-		/* do_reset: same conditions for cancellation as
-		   bau_process_retry_msg() */
-		if ((msg->replied_to == 0) &&
-		    (msg->canceled == 0) &&
-		    (msg->sending_cpu == rap->sender) &&
-		    (msg->swack_vec) &&
-		    (msg->msg_type != MSG_NOOP)) {
-			unsigned long mmr;
-			unsigned long mr;
-			/*
-			 * make everyone else ignore this message
-			 */
-			msg->canceled = 1;
-			/*
-			 * only reset the resource if it is still pending
-			 */
-			mmr = ops.read_l_sw_ack();
-			msg_res = msg->swack_vec;
-			mr = (msg_res << UV_SW_ACK_NPENDING) | msg_res;
-			if (mmr & msg_res) {
-				stat->d_rcanceled++;
-				ops.write_l_sw_ack(mr);
-			}
-		}
-	}
-	return;
-}
-
-/*
- * Use IPI to get all target uvhubs to release resources held by
- * a given sending cpu number.
- */
-static void reset_with_ipi(struct pnmask *distribution, struct bau_control *bcp)
-{
-	int pnode;
-	int apnode;
-	int maskbits;
-	int sender = bcp->cpu;
-	cpumask_t *mask = bcp->uvhub_master->cpumask;
-	struct bau_control *smaster = bcp->socket_master;
-	struct reset_args reset_args;
-
-	reset_args.sender = sender;
-	cpumask_clear(mask);
-	/* find a single cpu for each uvhub in this distribution mask */
-	maskbits = sizeof(struct pnmask) * BITSPERBYTE;
-	/* each bit is a pnode relative to the partition base pnode */
-	for (pnode = 0; pnode < maskbits; pnode++) {
-		int cpu;
-		if (!bau_uvhub_isset(pnode, distribution))
-			continue;
-		apnode = pnode + bcp->partition_base_pnode;
-		cpu = pnode_to_first_cpu(apnode, smaster);
-		cpumask_set_cpu(cpu, mask);
-	}
-
-	/* IPI all cpus; preemption is already disabled */
-	smp_call_function_many(mask, do_reset, (void *)&reset_args, 1);
-	return;
-}
-
-/*
- * Not to be confused with cycles_2_ns() from tsc.c; this gives a relative
- * number, not an absolute. It converts a duration in cycles to a duration in
- * ns.
- */
-static inline unsigned long long cycles_2_ns(unsigned long long cyc)
-{
-	struct cyc2ns_data data;
-	unsigned long long ns;
-
-	cyc2ns_read_begin(&data);
-	ns = mul_u64_u32_shr(cyc, data.cyc2ns_mul, data.cyc2ns_shift);
-	cyc2ns_read_end();
-
-	return ns;
-}
-
-/*
- * The reverse of the above; converts a duration in ns to a duration in cycles.
- */
-static inline unsigned long long ns_2_cycles(unsigned long long ns)
-{
-	struct cyc2ns_data data;
-	unsigned long long cyc;
-
-	cyc2ns_read_begin(&data);
-	cyc = (ns << data.cyc2ns_shift) / data.cyc2ns_mul;
-	cyc2ns_read_end();
-
-	return cyc;
-}
-
-static inline unsigned long cycles_2_us(unsigned long long cyc)
-{
-	return cycles_2_ns(cyc) / NSEC_PER_USEC;
-}
-
-static inline cycles_t sec_2_cycles(unsigned long sec)
-{
-	return ns_2_cycles(sec * NSEC_PER_SEC);
-}
-
-static inline unsigned long long usec_2_cycles(unsigned long usec)
-{
-	return ns_2_cycles(usec * NSEC_PER_USEC);
-}
-
-/*
- * wait for all cpus on this hub to finish their sends and go quiet
- * leaves uvhub_quiesce set so that no new broadcasts are started by
- * bau_flush_send_and_wait()
- */
-static inline void quiesce_local_uvhub(struct bau_control *hmaster)
-{
-	atom_asr(1, (struct atomic_short *)&hmaster->uvhub_quiesce);
-}
-
-/*
- * mark this quiet-requestor as done
- */
-static inline void end_uvhub_quiesce(struct bau_control *hmaster)
-{
-	atom_asr(-1, (struct atomic_short *)&hmaster->uvhub_quiesce);
-}
-
-/*
- * UV2 could have an extra bit of status in the ACTIVATION_STATUS_2 register.
- * But not currently used.
- */
-static unsigned long uv2_3_read_status(unsigned long offset, int rshft, int desc)
-{
-	return ((read_lmmr(offset) >> rshft) & UV_ACT_STATUS_MASK) << 1;
-}
-
-/*
- * Entered when a bau descriptor has gone into a permanent busy wait because
- * of a hardware bug.
- * Workaround the bug.
- */
-static int handle_uv2_busy(struct bau_control *bcp)
-{
-	struct ptc_stats *stat = bcp->statp;
-
-	stat->s_uv2_wars++;
-	bcp->busy = 1;
-	return FLUSH_GIVEUP;
-}
-
-static int uv2_3_wait_completion(struct bau_desc *bau_desc,
-				struct bau_control *bcp, long try)
-{
-	unsigned long descriptor_stat;
-	cycles_t ttm;
-	u64 mmr_offset = bcp->status_mmr;
-	int right_shift = bcp->status_index;
-	int desc = bcp->uvhub_cpu;
-	long busy_reps = 0;
-	struct ptc_stats *stat = bcp->statp;
-
-	descriptor_stat = uv2_3_read_status(mmr_offset, right_shift, desc);
-
-	/* spin on the status MMR, waiting for it to go idle */
-	while (descriptor_stat != UV2H_DESC_IDLE) {
-		if (descriptor_stat == UV2H_DESC_SOURCE_TIMEOUT) {
-			/*
-			 * A h/w bug on the destination side may
-			 * have prevented the message being marked
-			 * pending, thus it doesn't get replied to
-			 * and gets continually nacked until it times
-			 * out with a SOURCE_TIMEOUT.
-			 */
-			stat->s_stimeout++;
-			return FLUSH_GIVEUP;
-		} else if (descriptor_stat == UV2H_DESC_DEST_TIMEOUT) {
-			ttm = get_cycles();
-
-			/*
-			 * Our retries may be blocked by all destination
-			 * swack resources being consumed, and a timeout
-			 * pending.  In that case hardware returns the
-			 * ERROR that looks like a destination timeout.
-			 * Without using the extended status we have to
-			 * deduce from the short time that this was a
-			 * strong nack.
-			 */
-			if (cycles_2_us(ttm - bcp->send_message) < timeout_us) {
-				bcp->conseccompletes = 0;
-				stat->s_plugged++;
-				/* FLUSH_RETRY_PLUGGED causes hang on boot */
-				return FLUSH_GIVEUP;
-			}
-			stat->s_dtimeout++;
-			bcp->conseccompletes = 0;
-			/* FLUSH_RETRY_TIMEOUT causes hang on boot */
-			return FLUSH_GIVEUP;
-		} else {
-			busy_reps++;
-			if (busy_reps > 1000000) {
-				/* not to hammer on the clock */
-				busy_reps = 0;
-				ttm = get_cycles();
-				if ((ttm - bcp->send_message) > bcp->timeout_interval)
-					return handle_uv2_busy(bcp);
-			}
-			/*
-			 * descriptor_stat is still BUSY
-			 */
-			cpu_relax();
-		}
-		descriptor_stat = uv2_3_read_status(mmr_offset, right_shift, desc);
-	}
-	bcp->conseccompletes++;
-	return FLUSH_COMPLETE;
-}
-
-/*
- * Returns the status of current BAU message for cpu desc as a bit field
- * [Error][Busy][Aux]
- */
-static u64 read_status(u64 status_mmr, int index, int desc)
-{
-	u64 stat;
-
-	stat = ((read_lmmr(status_mmr) >> index) & UV_ACT_STATUS_MASK) << 1;
-	stat |= (read_lmmr(UVH_LB_BAU_SB_ACTIVATION_STATUS_2) >> desc) & 0x1;
-
-	return stat;
-}
-
-static int uv4_wait_completion(struct bau_desc *bau_desc,
-				struct bau_control *bcp, long try)
-{
-	struct ptc_stats *stat = bcp->statp;
-	u64 descriptor_stat;
-	u64 mmr = bcp->status_mmr;
-	int index = bcp->status_index;
-	int desc = bcp->uvhub_cpu;
-
-	descriptor_stat = read_status(mmr, index, desc);
-
-	/* spin on the status MMR, waiting for it to go idle */
-	while (descriptor_stat != UV2H_DESC_IDLE) {
-		switch (descriptor_stat) {
-		case UV2H_DESC_SOURCE_TIMEOUT:
-			stat->s_stimeout++;
-			return FLUSH_GIVEUP;
-
-		case UV2H_DESC_DEST_TIMEOUT:
-			stat->s_dtimeout++;
-			bcp->conseccompletes = 0;
-			return FLUSH_RETRY_TIMEOUT;
-
-		case UV2H_DESC_DEST_STRONG_NACK:
-			stat->s_plugged++;
-			bcp->conseccompletes = 0;
-			return FLUSH_RETRY_PLUGGED;
-
-		case UV2H_DESC_DEST_PUT_ERR:
-			bcp->conseccompletes = 0;
-			return FLUSH_GIVEUP;
-
-		default:
-			/* descriptor_stat is still BUSY */
-			cpu_relax();
-		}
-		descriptor_stat = read_status(mmr, index, desc);
-	}
-	bcp->conseccompletes++;
-	return FLUSH_COMPLETE;
-}
-
-/*
- * Our retries are blocked by all destination sw ack resources being
- * in use, and a timeout is pending. In that case hardware immediately
- * returns the ERROR that looks like a destination timeout.
- */
-static void destination_plugged(struct bau_desc *bau_desc,
-			struct bau_control *bcp,
-			struct bau_control *hmaster, struct ptc_stats *stat)
-{
-	udelay(bcp->plugged_delay);
-	bcp->plugged_tries++;
-
-	if (bcp->plugged_tries >= bcp->plugsb4reset) {
-		bcp->plugged_tries = 0;
-
-		quiesce_local_uvhub(hmaster);
-
-		spin_lock(&hmaster->queue_lock);
-		reset_with_ipi(&bau_desc->distribution, bcp);
-		spin_unlock(&hmaster->queue_lock);
-
-		end_uvhub_quiesce(hmaster);
-
-		bcp->ipi_attempts++;
-		stat->s_resets_plug++;
-	}
-}
-
-static void destination_timeout(struct bau_desc *bau_desc,
-			struct bau_control *bcp, struct bau_control *hmaster,
-			struct ptc_stats *stat)
-{
-	hmaster->max_concurr = 1;
-	bcp->timeout_tries++;
-	if (bcp->timeout_tries >= bcp->timeoutsb4reset) {
-		bcp->timeout_tries = 0;
-
-		quiesce_local_uvhub(hmaster);
-
-		spin_lock(&hmaster->queue_lock);
-		reset_with_ipi(&bau_desc->distribution, bcp);
-		spin_unlock(&hmaster->queue_lock);
-
-		end_uvhub_quiesce(hmaster);
-
-		bcp->ipi_attempts++;
-		stat->s_resets_timeout++;
-	}
-}
-
-/*
- * Stop all cpus on a uvhub from using the BAU for a period of time.
- * This is reversed by check_enable.
- */
-static void disable_for_period(struct bau_control *bcp, struct ptc_stats *stat)
-{
-	int tcpu;
-	struct bau_control *tbcp;
-	struct bau_control *hmaster;
-	cycles_t tm1;
-
-	hmaster = bcp->uvhub_master;
-	spin_lock(&hmaster->disable_lock);
-	if (!bcp->baudisabled) {
-		stat->s_bau_disabled++;
-		tm1 = get_cycles();
-		for_each_present_cpu(tcpu) {
-			tbcp = &per_cpu(bau_control, tcpu);
-			if (tbcp->uvhub_master == hmaster) {
-				tbcp->baudisabled = 1;
-				tbcp->set_bau_on_time =
-					tm1 + bcp->disabled_period;
-			}
-		}
-	}
-	spin_unlock(&hmaster->disable_lock);
-}
-
-static void count_max_concurr(int stat, struct bau_control *bcp,
-				struct bau_control *hmaster)
-{
-	bcp->plugged_tries = 0;
-	bcp->timeout_tries = 0;
-	if (stat != FLUSH_COMPLETE)
-		return;
-	if (bcp->conseccompletes <= bcp->complete_threshold)
-		return;
-	if (hmaster->max_concurr >= hmaster->max_concurr_const)
-		return;
-	hmaster->max_concurr++;
-}
-
-static void record_send_stats(cycles_t time1, cycles_t time2,
-		struct bau_control *bcp, struct ptc_stats *stat,
-		int completion_status, int try)
-{
-	cycles_t elapsed;
-
-	if (time2 > time1) {
-		elapsed = time2 - time1;
-		stat->s_time += elapsed;
-
-		if ((completion_status == FLUSH_COMPLETE) && (try == 1)) {
-			bcp->period_requests++;
-			bcp->period_time += elapsed;
-			if ((elapsed > usec_2_cycles(bcp->cong_response_us)) &&
-			    (bcp->period_requests > bcp->cong_reps) &&
-			    ((bcp->period_time / bcp->period_requests) >
-					usec_2_cycles(bcp->cong_response_us))) {
-				stat->s_congested++;
-				disable_for_period(bcp, stat);
-			}
-		}
-	} else
-		stat->s_requestor--;
-
-	if (completion_status == FLUSH_COMPLETE && try > 1)
-		stat->s_retriesok++;
-	else if (completion_status == FLUSH_GIVEUP) {
-		stat->s_giveup++;
-		if (get_cycles() > bcp->period_end)
-			bcp->period_giveups = 0;
-		bcp->period_giveups++;
-		if (bcp->period_giveups == 1)
-			bcp->period_end = get_cycles() + bcp->disabled_period;
-		if (bcp->period_giveups > bcp->giveup_limit) {
-			disable_for_period(bcp, stat);
-			stat->s_giveuplimit++;
-		}
-	}
-}
-
-/*
- * Handle the completion status of a message send.
- */
-static void handle_cmplt(int completion_status, struct bau_desc *bau_desc,
-			struct bau_control *bcp, struct bau_control *hmaster,
-			struct ptc_stats *stat)
-{
-	if (completion_status == FLUSH_RETRY_PLUGGED)
-		destination_plugged(bau_desc, bcp, hmaster, stat);
-	else if (completion_status == FLUSH_RETRY_TIMEOUT)
-		destination_timeout(bau_desc, bcp, hmaster, stat);
-}
-
-/*
- * Send a broadcast and wait for it to complete.
- *
- * The flush_mask contains the cpus the broadcast is to be sent to including
- * cpus that are on the local uvhub.
- *
- * Returns 0 if all flushing represented in the mask was done.
- * Returns 1 if it gives up entirely and the original cpu mask is to be
- * returned to the kernel.
- */
-static int uv_flush_send_and_wait(struct cpumask *flush_mask,
-				  struct bau_control *bcp,
-				  struct bau_desc *bau_desc)
-{
-	int seq_number = 0;
-	int completion_stat = 0;
-	long try = 0;
-	unsigned long index;
-	cycles_t time1;
-	cycles_t time2;
-	struct ptc_stats *stat = bcp->statp;
-	struct bau_control *hmaster = bcp->uvhub_master;
-	struct uv2_3_bau_msg_header *uv2_3_hdr = NULL;
-
-	while (hmaster->uvhub_quiesce)
-		cpu_relax();
-
-	time1 = get_cycles();
-	uv2_3_hdr = &bau_desc->header.uv2_3_hdr;
-
-	do {
-		if (try == 0) {
-			uv2_3_hdr->msg_type = MSG_REGULAR;
-			seq_number = bcp->message_number++;
-		} else {
-			uv2_3_hdr->msg_type = MSG_RETRY;
-			stat->s_retry_messages++;
-		}
-
-		uv2_3_hdr->sequence = seq_number;
-		index = (1UL << AS_PUSH_SHIFT) | bcp->uvhub_cpu;
-		bcp->send_message = get_cycles();
-
-		write_mmr_activation(index);
-
-		try++;
-		completion_stat = ops.wait_completion(bau_desc, bcp, try);
-
-		handle_cmplt(completion_stat, bau_desc, bcp, hmaster, stat);
-
-		if (bcp->ipi_attempts >= bcp->ipi_reset_limit) {
-			bcp->ipi_attempts = 0;
-			stat->s_overipilimit++;
-			completion_stat = FLUSH_GIVEUP;
-			break;
-		}
-		cpu_relax();
-	} while ((completion_stat == FLUSH_RETRY_PLUGGED) ||
-		 (completion_stat == FLUSH_RETRY_TIMEOUT));
-
-	time2 = get_cycles();
-
-	count_max_concurr(completion_stat, bcp, hmaster);
-
-	while (hmaster->uvhub_quiesce)
-		cpu_relax();
-
-	atomic_dec(&hmaster->active_descriptor_count);
-
-	record_send_stats(time1, time2, bcp, stat, completion_stat, try);
-
-	if (completion_stat == FLUSH_GIVEUP)
-		/* FLUSH_GIVEUP will fall back to using IPI's for tlb flush */
-		return 1;
-	return 0;
-}
-
-/*
- * The BAU is disabled for this uvhub. When the disabled time period has
- * expired re-enable it.
- * Return 0 if it is re-enabled for all cpus on this uvhub.
- */
-static int check_enable(struct bau_control *bcp, struct ptc_stats *stat)
-{
-	int tcpu;
-	struct bau_control *tbcp;
-	struct bau_control *hmaster;
-
-	hmaster = bcp->uvhub_master;
-	spin_lock(&hmaster->disable_lock);
-	if (bcp->baudisabled && (get_cycles() >= bcp->set_bau_on_time)) {
-		stat->s_bau_reenabled++;
-		for_each_present_cpu(tcpu) {
-			tbcp = &per_cpu(bau_control, tcpu);
-			if (tbcp->uvhub_master == hmaster) {
-				tbcp->baudisabled = 0;
-				tbcp->period_requests = 0;
-				tbcp->period_time = 0;
-				tbcp->period_giveups = 0;
-			}
-		}
-		spin_unlock(&hmaster->disable_lock);
-		return 0;
-	}
-	spin_unlock(&hmaster->disable_lock);
-	return -1;
-}
-
-static void record_send_statistics(struct ptc_stats *stat, int locals, int hubs,
-				int remotes, struct bau_desc *bau_desc)
-{
-	stat->s_requestor++;
-	stat->s_ntargcpu += remotes + locals;
-	stat->s_ntargremotes += remotes;
-	stat->s_ntarglocals += locals;
-
-	/* uvhub statistics */
-	hubs = bau_uvhub_weight(&bau_desc->distribution);
-	if (locals) {
-		stat->s_ntarglocaluvhub++;
-		stat->s_ntargremoteuvhub += (hubs - 1);
-	} else
-		stat->s_ntargremoteuvhub += hubs;
-
-	stat->s_ntarguvhub += hubs;
-
-	if (hubs >= 16)
-		stat->s_ntarguvhub16++;
-	else if (hubs >= 8)
-		stat->s_ntarguvhub8++;
-	else if (hubs >= 4)
-		stat->s_ntarguvhub4++;
-	else if (hubs >= 2)
-		stat->s_ntarguvhub2++;
-	else
-		stat->s_ntarguvhub1++;
-}
-
-/*
- * Translate a cpu mask to the uvhub distribution mask in the BAU
- * activation descriptor.
- */
-static int set_distrib_bits(struct cpumask *flush_mask, struct bau_control *bcp,
-			struct bau_desc *bau_desc, int *localsp, int *remotesp)
-{
-	int cpu;
-	int pnode;
-	int cnt = 0;
-	struct hub_and_pnode *hpp;
-
-	for_each_cpu(cpu, flush_mask) {
-		/*
-		 * The distribution vector is a bit map of pnodes, relative
-		 * to the partition base pnode (and the partition base nasid
-		 * in the header).
-		 * Translate cpu to pnode and hub using a local memory array.
-		 */
-		hpp = &bcp->socket_master->thp[cpu];
-		pnode = hpp->pnode - bcp->partition_base_pnode;
-		bau_uvhub_set(pnode, &bau_desc->distribution);
-		cnt++;
-		if (hpp->uvhub == bcp->uvhub)
-			(*localsp)++;
-		else
-			(*remotesp)++;
-	}
-	if (!cnt)
-		return 1;
-	return 0;
-}
-
-/*
- * globally purge translation cache of a virtual address or all TLB's
- * @cpumask: mask of all cpu's in which the address is to be removed
- * @mm: mm_struct containing virtual address range
- * @start: start virtual address to be removed from TLB
- * @end: end virtual address to be remove from TLB
- * @cpu: the current cpu
- *
- * This is the entry point for initiating any UV global TLB shootdown.
- *
- * Purges the translation caches of all specified processors of the given
- * virtual address, or purges all TLB's on specified processors.
- *
- * The caller has derived the cpumask from the mm_struct.  This function
- * is called only if there are bits set in the mask. (e.g. flush_tlb_page())
- *
- * The cpumask is converted into a uvhubmask of the uvhubs containing
- * those cpus.
- *
- * Note that this function should be called with preemption disabled.
- *
- * Returns NULL if all remote flushing was done.
- * Returns pointer to cpumask if some remote flushing remains to be
- * done.  The returned pointer is valid till preemption is re-enabled.
- */
-const struct cpumask *uv_flush_tlb_others(const struct cpumask *cpumask,
-					  const struct flush_tlb_info *info)
-{
-	unsigned int cpu = smp_processor_id();
-	int locals = 0, remotes = 0, hubs = 0;
-	struct bau_desc *bau_desc;
-	struct cpumask *flush_mask;
-	struct ptc_stats *stat;
-	struct bau_control *bcp;
-	unsigned long descriptor_status, status, address;
-
-	bcp = &per_cpu(bau_control, cpu);
-
-	if (bcp->nobau)
-		return cpumask;
-
-	stat = bcp->statp;
-	stat->s_enters++;
-
-	if (bcp->busy) {
-		descriptor_status =
-			read_lmmr(UVH_LB_BAU_SB_ACTIVATION_STATUS_0);
-		status = ((descriptor_status >> (bcp->uvhub_cpu *
-			UV_ACT_STATUS_SIZE)) & UV_ACT_STATUS_MASK) << 1;
-		if (status == UV2H_DESC_BUSY)
-			return cpumask;
-		bcp->busy = 0;
-	}
-
-	/* bau was disabled due to slow response */
-	if (bcp->baudisabled) {
-		if (check_enable(bcp, stat)) {
-			stat->s_ipifordisabled++;
-			return cpumask;
-		}
-	}
-
-	/*
-	 * Each sending cpu has a per-cpu mask which it fills from the caller's
-	 * cpu mask.  All cpus are converted to uvhubs and copied to the
-	 * activation descriptor.
-	 */
-	flush_mask = (struct cpumask *)per_cpu(uv_flush_tlb_mask, cpu);
-	/* don't actually do a shootdown of the local cpu */
-	cpumask_andnot(flush_mask, cpumask, cpumask_of(cpu));
-
-	if (cpumask_test_cpu(cpu, cpumask))
-		stat->s_ntargself++;
-
-	bau_desc = bcp->descriptor_base;
-	bau_desc += (ITEMS_PER_DESC * bcp->uvhub_cpu);
-	bau_uvhubs_clear(&bau_desc->distribution, UV_DISTRIBUTION_SIZE);
-	if (set_distrib_bits(flush_mask, bcp, bau_desc, &locals, &remotes))
-		return NULL;
-
-	record_send_statistics(stat, locals, hubs, remotes, bau_desc);
-
-	if (!info->end || (info->end - info->start) <= PAGE_SIZE)
-		address = info->start;
-	else
-		address = TLB_FLUSH_ALL;
-
-	switch (bcp->uvhub_version) {
-	case UV_BAU_V2:
-	case UV_BAU_V3:
-		bau_desc->payload.uv2_3.address = address;
-		bau_desc->payload.uv2_3.sending_cpu = cpu;
-		break;
-	case UV_BAU_V4:
-		bau_desc->payload.uv4.address = address;
-		bau_desc->payload.uv4.sending_cpu = cpu;
-		bau_desc->payload.uv4.qualifier = BAU_DESC_QUALIFIER;
-		break;
-	}
-
-	/*
-	 * uv_flush_send_and_wait returns 0 if all cpu's were messaged,
-	 * or 1 if it gave up and the original cpumask should be returned.
-	 */
-	if (!uv_flush_send_and_wait(flush_mask, bcp, bau_desc))
-		return NULL;
-	else
-		return cpumask;
-}
-
-/*
- * Search the message queue for any 'other' unprocessed message with the
- * same software acknowledge resource bit vector as the 'msg' message.
- */
-static struct bau_pq_entry *find_another_by_swack(struct bau_pq_entry *msg,
-						  struct bau_control *bcp)
-{
-	struct bau_pq_entry *msg_next = msg + 1;
-	unsigned char swack_vec = msg->swack_vec;
-
-	if (msg_next > bcp->queue_last)
-		msg_next = bcp->queue_first;
-	while (msg_next != msg) {
-		if ((msg_next->canceled == 0) && (msg_next->replied_to == 0) &&
-				(msg_next->swack_vec == swack_vec))
-			return msg_next;
-		msg_next++;
-		if (msg_next > bcp->queue_last)
-			msg_next = bcp->queue_first;
-	}
-	return NULL;
-}
-
-/*
- * UV2 needs to work around a bug in which an arriving message has not
- * set a bit in the UVH_LB_BAU_INTD_SOFTWARE_ACKNOWLEDGE register.
- * Such a message must be ignored.
- */
-static void process_uv2_message(struct msg_desc *mdp, struct bau_control *bcp)
-{
-	unsigned long mmr_image;
-	unsigned char swack_vec;
-	struct bau_pq_entry *msg = mdp->msg;
-	struct bau_pq_entry *other_msg;
-
-	mmr_image = ops.read_l_sw_ack();
-	swack_vec = msg->swack_vec;
-
-	if ((swack_vec & mmr_image) == 0) {
-		/*
-		 * This message was assigned a swack resource, but no
-		 * reserved acknowlegment is pending.
-		 * The bug has prevented this message from setting the MMR.
-		 */
-		/*
-		 * Some message has set the MMR 'pending' bit; it might have
-		 * been another message.  Look for that message.
-		 */
-		other_msg = find_another_by_swack(msg, bcp);
-		if (other_msg) {
-			/*
-			 * There is another. Process this one but do not
-			 * ack it.
-			 */
-			bau_process_message(mdp, bcp, 0);
-			/*
-			 * Let the natural processing of that other message
-			 * acknowledge it. Don't get the processing of sw_ack's
-			 * out of order.
-			 */
-			return;
-		}
-	}
-
-	/*
-	 * Either the MMR shows this one pending a reply or there is no
-	 * other message using this sw_ack, so it is safe to acknowledge it.
-	 */
-	bau_process_message(mdp, bcp, 1);
-
-	return;
-}
-
-/*
- * The BAU message interrupt comes here. (registered by set_intr_gate)
- * See entry_64.S
- *
- * We received a broadcast assist message.
- *
- * Interrupts are disabled; this interrupt could represent
- * the receipt of several messages.
- *
- * All cores/threads on this hub get this interrupt.
- * The last one to see it does the software ack.
- * (the resource will not be freed until noninterruptable cpus see this
- *  interrupt; hardware may timeout the s/w ack and reply ERROR)
- */
-DEFINE_IDTENTRY_SYSVEC(sysvec_uv_bau_message)
-{
-	int count = 0;
-	cycles_t time_start;
-	struct bau_pq_entry *msg;
-	struct bau_control *bcp;
-	struct ptc_stats *stat;
-	struct msg_desc msgdesc;
-
-	ack_APIC_irq();
-	kvm_set_cpu_l1tf_flush_l1d();
-	time_start = get_cycles();
-
-	bcp = &per_cpu(bau_control, smp_processor_id());
-	stat = bcp->statp;
-
-	msgdesc.queue_first = bcp->queue_first;
-	msgdesc.queue_last = bcp->queue_last;
-
-	msg = bcp->bau_msg_head;
-	while (msg->swack_vec) {
-		count++;
-
-		msgdesc.msg_slot = msg - msgdesc.queue_first;
-		msgdesc.msg = msg;
-		if (bcp->uvhub_version == UV_BAU_V2)
-			process_uv2_message(&msgdesc, bcp);
-		else
-			/* no error workaround for uv3 */
-			bau_process_message(&msgdesc, bcp, 1);
-
-		msg++;
-		if (msg > msgdesc.queue_last)
-			msg = msgdesc.queue_first;
-		bcp->bau_msg_head = msg;
-	}
-	stat->d_time += (get_cycles() - time_start);
-	if (!count)
-		stat->d_nomsg++;
-	else if (count > 1)
-		stat->d_multmsg++;
-}
-
-/*
- * Each target uvhub (i.e. a uvhub that has cpu's) needs to have
- * shootdown message timeouts enabled.  The timeout does not cause
- * an interrupt, but causes an error message to be returned to
- * the sender.
- */
-static void __init enable_timeouts(void)
-{
-	int uvhub;
-	int nuvhubs;
-	int pnode;
-	unsigned long mmr_image;
-
-	nuvhubs = uv_num_possible_blades();
-
-	for (uvhub = 0; uvhub < nuvhubs; uvhub++) {
-		if (!uv_blade_nr_possible_cpus(uvhub))
-			continue;
-
-		pnode = uv_blade_to_pnode(uvhub);
-		mmr_image = read_mmr_misc_control(pnode);
-		/*
-		 * Set the timeout period and then lock it in, in three
-		 * steps; captures and locks in the period.
-		 *
-		 * To program the period, the SOFT_ACK_MODE must be off.
-		 */
-		mmr_image &= ~(1L << SOFTACK_MSHIFT);
-		write_mmr_misc_control(pnode, mmr_image);
-		/*
-		 * Set the 4-bit period.
-		 */
-		mmr_image &= ~((unsigned long)0xf << SOFTACK_PSHIFT);
-		mmr_image |= (SOFTACK_TIMEOUT_PERIOD << SOFTACK_PSHIFT);
-		write_mmr_misc_control(pnode, mmr_image);
-
-		mmr_image |= (1L << SOFTACK_MSHIFT);
-		if (is_uv2_hub()) {
-			/* do not touch the legacy mode bit */
-			/* hw bug workaround; do not use extended status */
-			mmr_image &= ~(1L << UV2_EXT_SHFT);
-		} else if (is_uv3_hub()) {
-			mmr_image &= ~(1L << PREFETCH_HINT_SHFT);
-			mmr_image |= (1L << SB_STATUS_SHFT);
-		}
-		write_mmr_misc_control(pnode, mmr_image);
-	}
-}
-
-static void *ptc_seq_start(struct seq_file *file, loff_t *offset)
-{
-	if (*offset < num_possible_cpus())
-		return offset;
-	return NULL;
-}
-
-static void *ptc_seq_next(struct seq_file *file, void *data, loff_t *offset)
-{
-	(*offset)++;
-	if (*offset < num_possible_cpus())
-		return offset;
-	return NULL;
-}
-
-static void ptc_seq_stop(struct seq_file *file, void *data)
-{
-}
-
-/*
- * Display the statistics thru /proc/sgi_uv/ptc_statistics
- * 'data' points to the cpu number
- * Note: see the descriptions in stat_description[].
- */
-static int ptc_seq_show(struct seq_file *file, void *data)
-{
-	struct ptc_stats *stat;
-	struct bau_control *bcp;
-	int cpu;
-
-	cpu = *(loff_t *)data;
-	if (!cpu) {
-		seq_puts(file,
-			 "# cpu bauoff sent stime self locals remotes ncpus localhub ");
-		seq_puts(file, "remotehub numuvhubs numuvhubs16 numuvhubs8 ");
-		seq_puts(file,
-			 "numuvhubs4 numuvhubs2 numuvhubs1 dto snacks retries ");
-		seq_puts(file,
-			 "rok resetp resett giveup sto bz throt disable ");
-		seq_puts(file,
-			 "enable wars warshw warwaits enters ipidis plugged ");
-		seq_puts(file,
-			 "ipiover glim cong swack recv rtime all one mult ");
-		seq_puts(file, "none retry canc nocan reset rcan\n");
-	}
-	if (cpu < num_possible_cpus() && cpu_online(cpu)) {
-		bcp = &per_cpu(bau_control, cpu);
-		if (bcp->nobau) {
-			seq_printf(file, "cpu %d bau disabled\n", cpu);
-			return 0;
-		}
-		stat = bcp->statp;
-		/* source side statistics */
-		seq_printf(file,
-			"cpu %d %d %ld %ld %ld %ld %ld %ld %ld %ld %ld %ld ",
-			   cpu, bcp->nobau, stat->s_requestor,
-			   cycles_2_us(stat->s_time),
-			   stat->s_ntargself, stat->s_ntarglocals,
-			   stat->s_ntargremotes, stat->s_ntargcpu,
-			   stat->s_ntarglocaluvhub, stat->s_ntargremoteuvhub,
-			   stat->s_ntarguvhub, stat->s_ntarguvhub16);
-		seq_printf(file, "%ld %ld %ld %ld %ld %ld ",
-			   stat->s_ntarguvhub8, stat->s_ntarguvhub4,
-			   stat->s_ntarguvhub2, stat->s_ntarguvhub1,
-			   stat->s_dtimeout, stat->s_strongnacks);
-		seq_printf(file, "%ld %ld %ld %ld %ld %ld %ld %ld ",
-			   stat->s_retry_messages, stat->s_retriesok,
-			   stat->s_resets_plug, stat->s_resets_timeout,
-			   stat->s_giveup, stat->s_stimeout,
-			   stat->s_busy, stat->s_throttles);
-		seq_printf(file, "%ld %ld %ld %ld %ld %ld %ld %ld %ld %ld %ld ",
-			   stat->s_bau_disabled, stat->s_bau_reenabled,
-			   stat->s_uv2_wars, stat->s_uv2_wars_hw,
-			   stat->s_uv2_war_waits, stat->s_enters,
-			   stat->s_ipifordisabled, stat->s_plugged,
-			   stat->s_overipilimit, stat->s_giveuplimit,
-			   stat->s_congested);
-
-		/* destination side statistics */
-		seq_printf(file,
-			"%lx %ld %ld %ld %ld %ld %ld %ld %ld %ld %ld %ld\n",
-			   ops.read_g_sw_ack(uv_cpu_to_pnode(cpu)),
-			   stat->d_requestee, cycles_2_us(stat->d_time),
-			   stat->d_alltlb, stat->d_onetlb, stat->d_multmsg,
-			   stat->d_nomsg, stat->d_retries, stat->d_canceled,
-			   stat->d_nocanceled, stat->d_resets,
-			   stat->d_rcanceled);
-	}
-	return 0;
-}
-
-/*
- * Display the tunables thru debugfs
- */
-static ssize_t tunables_read(struct file *file, char __user *userbuf,
-				size_t count, loff_t *ppos)
-{
-	char *buf;
-	int ret;
-
-	buf = kasprintf(GFP_KERNEL, "%s %s %s\n%d %d %d %d %d %d %d %d %d %d\n",
-		"max_concur plugged_delay plugsb4reset timeoutsb4reset",
-		"ipi_reset_limit complete_threshold congested_response_us",
-		"congested_reps disabled_period giveup_limit",
-		max_concurr, plugged_delay, plugsb4reset,
-		timeoutsb4reset, ipi_reset_limit, complete_threshold,
-		congested_respns_us, congested_reps, disabled_period,
-		giveup_limit);
-
-	if (!buf)
-		return -ENOMEM;
-
-	ret = simple_read_from_buffer(userbuf, count, ppos, buf, strlen(buf));
-	kfree(buf);
-	return ret;
-}
-
-/*
- * handle a write to /proc/sgi_uv/ptc_statistics
- * -1: reset the statistics
- *  0: display meaning of the statistics
- */
-static ssize_t ptc_proc_write(struct file *file, const char __user *user,
-				size_t count, loff_t *data)
-{
-	int cpu;
-	int i;
-	int elements;
-	long input_arg;
-	char optstr[64];
-	struct ptc_stats *stat;
-
-	if (count == 0 || count > sizeof(optstr))
-		return -EINVAL;
-	if (copy_from_user(optstr, user, count))
-		return -EFAULT;
-	optstr[count - 1] = '\0';
-
-	if (!strcmp(optstr, "on")) {
-		set_bau_on();
-		return count;
-	} else if (!strcmp(optstr, "off")) {
-		set_bau_off();
-		return count;
-	}
-
-	if (kstrtol(optstr, 10, &input_arg) < 0) {
-		pr_debug("%s is invalid\n", optstr);
-		return -EINVAL;
-	}
-
-	if (input_arg == 0) {
-		elements = ARRAY_SIZE(stat_description);
-		pr_debug("# cpu:      cpu number\n");
-		pr_debug("Sender statistics:\n");
-		for (i = 0; i < elements; i++)
-			pr_debug("%s\n", stat_description[i]);
-	} else if (input_arg == -1) {
-		for_each_present_cpu(cpu) {
-			stat = &per_cpu(ptcstats, cpu);
-			memset(stat, 0, sizeof(struct ptc_stats));
-		}
-	}
-
-	return count;
-}
-
-static int local_atoi(const char *name)
-{
-	int val = 0;
-
-	for (;; name++) {
-		switch (*name) {
-		case '0' ... '9':
-			val = 10*val+(*name-'0');
-			break;
-		default:
-			return val;
-		}
-	}
-}
-
-/*
- * Parse the values written to /sys/kernel/debug/sgi_uv/bau_tunables.
- * Zero values reset them to defaults.
- */
-static int parse_tunables_write(struct bau_control *bcp, char *instr,
-				int count)
-{
-	char *p;
-	char *q;
-	int cnt = 0;
-	int val;
-	int e = ARRAY_SIZE(tunables);
-
-	p = instr + strspn(instr, WHITESPACE);
-	q = p;
-	for (; *p; p = q + strspn(q, WHITESPACE)) {
-		q = p + strcspn(p, WHITESPACE);
-		cnt++;
-		if (q == p)
-			break;
-	}
-	if (cnt != e) {
-		pr_info("bau tunable error: should be %d values\n", e);
-		return -EINVAL;
-	}
-
-	p = instr + strspn(instr, WHITESPACE);
-	q = p;
-	for (cnt = 0; *p; p = q + strspn(q, WHITESPACE), cnt++) {
-		q = p + strcspn(p, WHITESPACE);
-		val = local_atoi(p);
-		switch (cnt) {
-		case 0:
-			if (val == 0) {
-				max_concurr = MAX_BAU_CONCURRENT;
-				max_concurr_const = MAX_BAU_CONCURRENT;
-				continue;
-			}
-			if (val < 1 || val > bcp->cpus_in_uvhub) {
-				pr_debug(
-				"Error: BAU max concurrent %d is invalid\n",
-				val);
-				return -EINVAL;
-			}
-			max_concurr = val;
-			max_concurr_const = val;
-			continue;
-		default:
-			if (val == 0)
-				*tunables[cnt].tunp = tunables[cnt].deflt;
-			else
-				*tunables[cnt].tunp = val;
-			continue;
-		}
-	}
-	return 0;
-}
-
-/*
- * Handle a write to debugfs. (/sys/kernel/debug/sgi_uv/bau_tunables)
- */
-static ssize_t tunables_write(struct file *file, const char __user *user,
-				size_t count, loff_t *data)
-{
-	int cpu;
-	int ret;
-	char instr[100];
-	struct bau_control *bcp;
-
-	if (count == 0 || count > sizeof(instr)-1)
-		return -EINVAL;
-	if (copy_from_user(instr, user, count))
-		return -EFAULT;
-
-	instr[count] = '\0';
-
-	cpu = get_cpu();
-	bcp = &per_cpu(bau_control, cpu);
-	ret = parse_tunables_write(bcp, instr, count);
-	put_cpu();
-	if (ret)
-		return ret;
-
-	for_each_present_cpu(cpu) {
-		bcp = &per_cpu(bau_control, cpu);
-		bcp->max_concurr         = max_concurr;
-		bcp->max_concurr_const   = max_concurr;
-		bcp->plugged_delay       = plugged_delay;
-		bcp->plugsb4reset        = plugsb4reset;
-		bcp->timeoutsb4reset     = timeoutsb4reset;
-		bcp->ipi_reset_limit     = ipi_reset_limit;
-		bcp->complete_threshold  = complete_threshold;
-		bcp->cong_response_us    = congested_respns_us;
-		bcp->cong_reps           = congested_reps;
-		bcp->disabled_period     = sec_2_cycles(disabled_period);
-		bcp->giveup_limit        = giveup_limit;
-	}
-	return count;
-}
-
-static const struct seq_operations uv_ptc_seq_ops = {
-	.start		= ptc_seq_start,
-	.next		= ptc_seq_next,
-	.stop		= ptc_seq_stop,
-	.show		= ptc_seq_show
-};
-
-static int ptc_proc_open(struct inode *inode, struct file *file)
-{
-	return seq_open(file, &uv_ptc_seq_ops);
-}
-
-static int tunables_open(struct inode *inode, struct file *file)
-{
-	return 0;
-}
-
-static const struct proc_ops uv_ptc_proc_ops = {
-	.proc_open	= ptc_proc_open,
-	.proc_read	= seq_read,
-	.proc_write	= ptc_proc_write,
-	.proc_lseek	= seq_lseek,
-	.proc_release	= seq_release,
-};
-
-static const struct file_operations tunables_fops = {
-	.open		= tunables_open,
-	.read		= tunables_read,
-	.write		= tunables_write,
-	.llseek		= default_llseek,
-};
-
-static int __init uv_ptc_init(void)
-{
-	struct proc_dir_entry *proc_uv_ptc;
-
-	if (!is_uv_system())
-		return 0;
-
-	proc_uv_ptc = proc_create(UV_PTC_BASENAME, 0444, NULL,
-				  &uv_ptc_proc_ops);
-	if (!proc_uv_ptc) {
-		pr_err("unable to create %s proc entry\n",
-		       UV_PTC_BASENAME);
-		return -EINVAL;
-	}
-
-	tunables_dir = debugfs_create_dir(UV_BAU_TUNABLES_DIR, NULL);
-	debugfs_create_file(UV_BAU_TUNABLES_FILE, 0600, tunables_dir, NULL,
-			    &tunables_fops);
-	return 0;
-}
-
-/*
- * Initialize the sending side's sending buffers.
- */
-static void activation_descriptor_init(int node, int pnode, int base_pnode)
-{
-	int i;
-	int cpu;
-	unsigned long gpa;
-	unsigned long m;
-	unsigned long n;
-	size_t dsize;
-	struct bau_desc *bau_desc;
-	struct bau_desc *bd2;
-	struct uv2_3_bau_msg_header *uv2_3_hdr;
-	struct bau_control *bcp;
-
-	/*
-	 * each bau_desc is 64 bytes; there are 8 (ITEMS_PER_DESC)
-	 * per cpu; and one per cpu on the uvhub (ADP_SZ)
-	 */
-	dsize = sizeof(struct bau_desc) * ADP_SZ * ITEMS_PER_DESC;
-	bau_desc = kmalloc_node(dsize, GFP_KERNEL, node);
-	BUG_ON(!bau_desc);
-
-	gpa = uv_gpa(bau_desc);
-	n = uv_gpa_to_gnode(gpa);
-	m = ops.bau_gpa_to_offset(gpa);
-
-	/* the 14-bit pnode */
-	write_mmr_descriptor_base(pnode,
-		(n << UVH_LB_BAU_SB_DESCRIPTOR_BASE_NODE_ID_SHFT | m));
-	/*
-	 * Initializing all 8 (ITEMS_PER_DESC) descriptors for each
-	 * cpu even though we only use the first one; one descriptor can
-	 * describe a broadcast to 256 uv hubs.
-	 */
-	for (i = 0, bd2 = bau_desc; i < (ADP_SZ * ITEMS_PER_DESC); i++, bd2++) {
-		memset(bd2, 0, sizeof(struct bau_desc));
-		/*
-		 * BIOS uses legacy mode, but uv2 and uv3 hardware always
-		 * uses native mode for selective broadcasts.
-		 */
-		uv2_3_hdr = &bd2->header.uv2_3_hdr;
-		uv2_3_hdr->swack_flag      = 1;
-		uv2_3_hdr->base_dest_nasid = UV_PNODE_TO_NASID(base_pnode);
-		uv2_3_hdr->dest_subnodeid  = UV_LB_SUBNODEID;
-		uv2_3_hdr->command         = UV_NET_ENDPOINT_INTD;
-	}
-	for_each_present_cpu(cpu) {
-		if (pnode != uv_blade_to_pnode(uv_cpu_to_blade_id(cpu)))
-			continue;
-		bcp = &per_cpu(bau_control, cpu);
-		bcp->descriptor_base = bau_desc;
-	}
-}
-
-/*
- * initialize the destination side's receiving buffers
- * entered for each uvhub in the partition
- * - node is first node (kernel memory notion) on the uvhub
- * - pnode is the uvhub's physical identifier
- */
-static void pq_init(int node, int pnode)
-{
-	int cpu;
-	size_t plsize;
-	char *cp;
-	void *vp;
-	unsigned long gnode, first, last, tail;
-	struct bau_pq_entry *pqp;
-	struct bau_control *bcp;
-
-	plsize = (DEST_Q_SIZE + 1) * sizeof(struct bau_pq_entry);
-	vp = kmalloc_node(plsize, GFP_KERNEL, node);
-	BUG_ON(!vp);
-
-	pqp = (struct bau_pq_entry *)vp;
-	cp = (char *)pqp + 31;
-	pqp = (struct bau_pq_entry *)(((unsigned long)cp >> 5) << 5);
-
-	for_each_present_cpu(cpu) {
-		if (pnode != uv_cpu_to_pnode(cpu))
-			continue;
-		/* for every cpu on this pnode: */
-		bcp = &per_cpu(bau_control, cpu);
-		bcp->queue_first	= pqp;
-		bcp->bau_msg_head	= pqp;
-		bcp->queue_last		= pqp + (DEST_Q_SIZE - 1);
-	}
-
-	first = ops.bau_gpa_to_offset(uv_gpa(pqp));
-	last = ops.bau_gpa_to_offset(uv_gpa(pqp + (DEST_Q_SIZE - 1)));
-
-	/*
-	 * Pre UV4, the gnode is required to locate the payload queue
-	 * and the payload queue tail must be maintained by the kernel.
-	 */
-	bcp = &per_cpu(bau_control, smp_processor_id());
-	if (bcp->uvhub_version <= UV_BAU_V3) {
-		tail = first;
-		gnode = uv_gpa_to_gnode(uv_gpa(pqp));
-		first = (gnode << UV_PAYLOADQ_GNODE_SHIFT) | tail;
-		write_mmr_payload_tail(pnode, tail);
-	}
-
-	ops.write_payload_first(pnode, first);
-	ops.write_payload_last(pnode, last);
-
-	/* in effect, all msg_type's are set to MSG_NOOP */
-	memset(pqp, 0, sizeof(struct bau_pq_entry) * DEST_Q_SIZE);
-}
-
-/*
- * Initialization of each UV hub's structures
- */
-static void __init init_uvhub(int uvhub, int vector, int base_pnode)
-{
-	int node;
-	int pnode;
-	unsigned long apicid;
-
-	node = uvhub_to_first_node(uvhub);
-	pnode = uv_blade_to_pnode(uvhub);
-
-	activation_descriptor_init(node, pnode, base_pnode);
-
-	pq_init(node, pnode);
-	/*
-	 * The below initialization can't be in firmware because the
-	 * messaging IRQ will be determined by the OS.
-	 */
-	apicid = uvhub_to_first_apicid(uvhub);
-	write_mmr_data_config(pnode, ((apicid << 32) | vector));
-}
-
-/*
- * We will set BAU_MISC_CONTROL with a timeout period.
- * But the BIOS has set UVH_AGING_PRESCALE_SEL and UVH_TRANSACTION_TIMEOUT.
- * So the destination timeout period has to be calculated from them.
- */
-static int calculate_destination_timeout(void)
-{
-	unsigned long mmr_image;
-	int mult1;
-	int base;
-	int ret;
-
-	/* same destination timeout for uv2 and uv3 */
-	/* 4 bits  0/1 for 10/80us base, 3 bits of multiplier */
-	mmr_image = uv_read_local_mmr(UVH_LB_BAU_MISC_CONTROL);
-	mmr_image = (mmr_image & UV_SA_MASK) >> UV_SA_SHFT;
-	if (mmr_image & (1L << UV2_ACK_UNITS_SHFT))
-		base = 80;
-	else
-		base = 10;
-	mult1 = mmr_image & UV2_ACK_MASK;
-	ret = mult1 * base;
-
-	return ret;
-}
-
-static void __init init_per_cpu_tunables(void)
-{
-	int cpu;
-	struct bau_control *bcp;
-
-	for_each_present_cpu(cpu) {
-		bcp = &per_cpu(bau_control, cpu);
-		bcp->baudisabled		= 0;
-		if (nobau)
-			bcp->nobau		= true;
-		bcp->statp			= &per_cpu(ptcstats, cpu);
-		/* time interval to catch a hardware stay-busy bug */
-		bcp->timeout_interval		= usec_2_cycles(2*timeout_us);
-		bcp->max_concurr		= max_concurr;
-		bcp->max_concurr_const		= max_concurr;
-		bcp->plugged_delay		= plugged_delay;
-		bcp->plugsb4reset		= plugsb4reset;
-		bcp->timeoutsb4reset		= timeoutsb4reset;
-		bcp->ipi_reset_limit		= ipi_reset_limit;
-		bcp->complete_threshold		= complete_threshold;
-		bcp->cong_response_us		= congested_respns_us;
-		bcp->cong_reps			= congested_reps;
-		bcp->disabled_period		= sec_2_cycles(disabled_period);
-		bcp->giveup_limit		= giveup_limit;
-		spin_lock_init(&bcp->queue_lock);
-		spin_lock_init(&bcp->uvhub_lock);
-		spin_lock_init(&bcp->disable_lock);
-	}
-}
-
-/*
- * Scan all cpus to collect blade and socket summaries.
- */
-static int __init get_cpu_topology(int base_pnode,
-					struct uvhub_desc *uvhub_descs,
-					unsigned char *uvhub_mask)
-{
-	int cpu;
-	int pnode;
-	int uvhub;
-	int socket;
-	struct bau_control *bcp;
-	struct uvhub_desc *bdp;
-	struct socket_desc *sdp;
-
-	for_each_present_cpu(cpu) {
-		bcp = &per_cpu(bau_control, cpu);
-
-		memset(bcp, 0, sizeof(struct bau_control));
-
-		pnode = uv_cpu_hub_info(cpu)->pnode;
-		if ((pnode - base_pnode) >= UV_DISTRIBUTION_SIZE) {
-			pr_emerg(
-				"cpu %d pnode %d-%d beyond %d; BAU disabled\n",
-				cpu, pnode, base_pnode, UV_DISTRIBUTION_SIZE);
-			return 1;
-		}
-
-		bcp->osnode = cpu_to_node(cpu);
-		bcp->partition_base_pnode = base_pnode;
-
-		uvhub = uv_cpu_hub_info(cpu)->numa_blade_id;
-		*(uvhub_mask + (uvhub/8)) |= (1 << (uvhub%8));
-		bdp = &uvhub_descs[uvhub];
-
-		bdp->num_cpus++;
-		bdp->uvhub = uvhub;
-		bdp->pnode = pnode;
-
-		/* kludge: 'assuming' one node per socket, and assuming that
-		   disabling a socket just leaves a gap in node numbers */
-		socket = bcp->osnode & 1;
-		bdp->socket_mask |= (1 << socket);
-		sdp = &bdp->socket[socket];
-		sdp->cpu_number[sdp->num_cpus] = cpu;
-		sdp->num_cpus++;
-		if (sdp->num_cpus > MAX_CPUS_PER_SOCKET) {
-			pr_emerg("%d cpus per socket invalid\n",
-				sdp->num_cpus);
-			return 1;
-		}
-	}
-	return 0;
-}
-
-/*
- * Each socket is to get a local array of pnodes/hubs.
- */
-static void make_per_cpu_thp(struct bau_control *smaster)
-{
-	int cpu;
-	size_t hpsz = sizeof(struct hub_and_pnode) * num_possible_cpus();
-
-	smaster->thp = kzalloc_node(hpsz, GFP_KERNEL, smaster->osnode);
-	for_each_present_cpu(cpu) {
-		smaster->thp[cpu].pnode = uv_cpu_hub_info(cpu)->pnode;
-		smaster->thp[cpu].uvhub = uv_cpu_hub_info(cpu)->numa_blade_id;
-	}
-}
-
-/*
- * Each uvhub is to get a local cpumask.
- */
-static void make_per_hub_cpumask(struct bau_control *hmaster)
-{
-	int sz = sizeof(cpumask_t);
-
-	hmaster->cpumask = kzalloc_node(sz, GFP_KERNEL, hmaster->osnode);
-}
-
-/*
- * Initialize all the per_cpu information for the cpu's on a given socket,
- * given what has been gathered into the socket_desc struct.
- * And reports the chosen hub and socket masters back to the caller.
- */
-static int scan_sock(struct socket_desc *sdp, struct uvhub_desc *bdp,
-			struct bau_control **smasterp,
-			struct bau_control **hmasterp)
-{
-	int i, cpu, uvhub_cpu;
-	struct bau_control *bcp;
-
-	for (i = 0; i < sdp->num_cpus; i++) {
-		cpu = sdp->cpu_number[i];
-		bcp = &per_cpu(bau_control, cpu);
-		bcp->cpu = cpu;
-		if (i == 0) {
-			*smasterp = bcp;
-			if (!(*hmasterp))
-				*hmasterp = bcp;
-		}
-		bcp->cpus_in_uvhub = bdp->num_cpus;
-		bcp->cpus_in_socket = sdp->num_cpus;
-		bcp->socket_master = *smasterp;
-		bcp->uvhub = bdp->uvhub;
-		if (is_uv2_hub())
-			bcp->uvhub_version = UV_BAU_V2;
-		else if (is_uv3_hub())
-			bcp->uvhub_version = UV_BAU_V3;
-		else if (is_uv4_hub())
-			bcp->uvhub_version = UV_BAU_V4;
-		else {
-			pr_emerg("uvhub version not 1, 2, 3, or 4\n");
-			return 1;
-		}
-		bcp->uvhub_master = *hmasterp;
-		uvhub_cpu = uv_cpu_blade_processor_id(cpu);
-		bcp->uvhub_cpu = uvhub_cpu;
-
-		/*
-		 * The ERROR and BUSY status registers are located pairwise over
-		 * the STATUS_0 and STATUS_1 mmrs; each an array[32] of 2 bits.
-		 */
-		if (uvhub_cpu < UV_CPUS_PER_AS) {
-			bcp->status_mmr = UVH_LB_BAU_SB_ACTIVATION_STATUS_0;
-			bcp->status_index = uvhub_cpu * UV_ACT_STATUS_SIZE;
-		} else {
-			bcp->status_mmr = UVH_LB_BAU_SB_ACTIVATION_STATUS_1;
-			bcp->status_index = (uvhub_cpu - UV_CPUS_PER_AS)
-						* UV_ACT_STATUS_SIZE;
-		}
-
-		if (bcp->uvhub_cpu >= MAX_CPUS_PER_UVHUB) {
-			pr_emerg("%d cpus per uvhub invalid\n",
-				bcp->uvhub_cpu);
-			return 1;
-		}
-	}
-	return 0;
-}
-
-/*
- * Summarize the blade and socket topology into the per_cpu structures.
- */
-static int __init summarize_uvhub_sockets(int nuvhubs,
-			struct uvhub_desc *uvhub_descs,
-			unsigned char *uvhub_mask)
-{
-	int socket;
-	int uvhub;
-	unsigned short socket_mask;
-
-	for (uvhub = 0; uvhub < nuvhubs; uvhub++) {
-		struct uvhub_desc *bdp;
-		struct bau_control *smaster = NULL;
-		struct bau_control *hmaster = NULL;
-
-		if (!(*(uvhub_mask + (uvhub/8)) & (1 << (uvhub%8))))
-			continue;
-
-		bdp = &uvhub_descs[uvhub];
-		socket_mask = bdp->socket_mask;
-		socket = 0;
-		while (socket_mask) {
-			struct socket_desc *sdp;
-			if ((socket_mask & 1)) {
-				sdp = &bdp->socket[socket];
-				if (scan_sock(sdp, bdp, &smaster, &hmaster))
-					return 1;
-				make_per_cpu_thp(smaster);
-			}
-			socket++;
-			socket_mask = (socket_mask >> 1);
-		}
-		make_per_hub_cpumask(hmaster);
-	}
-	return 0;
-}
-
-/*
- * initialize the bau_control structure for each cpu
- */
-static int __init init_per_cpu(int nuvhubs, int base_part_pnode)
-{
-	struct uvhub_desc *uvhub_descs;
-	unsigned char *uvhub_mask = NULL;
-
-	if (is_uv3_hub() || is_uv2_hub())
-		timeout_us = calculate_destination_timeout();
-
-	uvhub_descs = kcalloc(nuvhubs, sizeof(struct uvhub_desc), GFP_KERNEL);
-	if (!uvhub_descs)
-		goto fail;
-
-	uvhub_mask = kzalloc((nuvhubs+7)/8, GFP_KERNEL);
-	if (!uvhub_mask)
-		goto fail;
-
-	if (get_cpu_topology(base_part_pnode, uvhub_descs, uvhub_mask))
-		goto fail;
-
-	if (summarize_uvhub_sockets(nuvhubs, uvhub_descs, uvhub_mask))
-		goto fail;
-
-	kfree(uvhub_descs);
-	kfree(uvhub_mask);
-	init_per_cpu_tunables();
-	return 0;
-
-fail:
-	kfree(uvhub_descs);
-	kfree(uvhub_mask);
-	return 1;
-}
-
-static const struct bau_operations uv2_3_bau_ops __initconst = {
-	.bau_gpa_to_offset       = uv_gpa_to_offset,
-	.read_l_sw_ack           = read_mmr_sw_ack,
-	.read_g_sw_ack           = read_gmmr_sw_ack,
-	.write_l_sw_ack          = write_mmr_sw_ack,
-	.write_g_sw_ack          = write_gmmr_sw_ack,
-	.write_payload_first     = write_mmr_payload_first,
-	.write_payload_last      = write_mmr_payload_last,
-	.wait_completion	 = uv2_3_wait_completion,
-};
-
-static const struct bau_operations uv4_bau_ops __initconst = {
-	.bau_gpa_to_offset       = uv_gpa_to_soc_phys_ram,
-	.read_l_sw_ack           = read_mmr_proc_sw_ack,
-	.read_g_sw_ack           = read_gmmr_proc_sw_ack,
-	.write_l_sw_ack          = write_mmr_proc_sw_ack,
-	.write_g_sw_ack          = write_gmmr_proc_sw_ack,
-	.write_payload_first     = write_mmr_proc_payload_first,
-	.write_payload_last      = write_mmr_proc_payload_last,
-	.wait_completion         = uv4_wait_completion,
-};
-
-/*
- * Initialization of BAU-related structures
- */
-static int __init uv_bau_init(void)
-{
-	int uvhub;
-	int pnode;
-	int nuvhubs;
-	int cur_cpu;
-	int cpus;
-	int vector;
-	cpumask_var_t *mask;
-
-	if (!is_uv_system())
-		return 0;
-
-	if (is_uv4_hub())
-		ops = uv4_bau_ops;
-	else if (is_uv3_hub())
-		ops = uv2_3_bau_ops;
-	else if (is_uv2_hub())
-		ops = uv2_3_bau_ops;
-
-	nuvhubs = uv_num_possible_blades();
-	if (nuvhubs < 2) {
-		pr_crit("UV: BAU disabled - insufficient hub count\n");
-		goto err_bau_disable;
-	}
-
-	for_each_possible_cpu(cur_cpu) {
-		mask = &per_cpu(uv_flush_tlb_mask, cur_cpu);
-		zalloc_cpumask_var_node(mask, GFP_KERNEL, cpu_to_node(cur_cpu));
-	}
-
-	uv_base_pnode = 0x7fffffff;
-	for (uvhub = 0; uvhub < nuvhubs; uvhub++) {
-		cpus = uv_blade_nr_possible_cpus(uvhub);
-		if (cpus && (uv_blade_to_pnode(uvhub) < uv_base_pnode))
-			uv_base_pnode = uv_blade_to_pnode(uvhub);
-	}
-
-	/* software timeouts are not supported on UV4 */
-	if (is_uv3_hub() || is_uv2_hub())
-		enable_timeouts();
-
-	if (init_per_cpu(nuvhubs, uv_base_pnode)) {
-		pr_crit("UV: BAU disabled - per CPU init failed\n");
-		goto err_bau_disable;
-	}
-
-	vector = UV_BAU_MESSAGE;
-	for_each_possible_blade(uvhub) {
-		if (uv_blade_nr_possible_cpus(uvhub))
-			init_uvhub(uvhub, vector, uv_base_pnode);
-	}
-
-	for_each_possible_blade(uvhub) {
-		if (uv_blade_nr_possible_cpus(uvhub)) {
-			unsigned long val;
-			unsigned long mmr;
-			pnode = uv_blade_to_pnode(uvhub);
-			/* INIT the bau */
-			val = 1L << 63;
-			write_gmmr_activation(pnode, val);
-			mmr = 1; /* should be 1 to broadcast to both sockets */
-			write_mmr_data_broadcast(pnode, mmr);
-		}
-	}
-
-	return 0;
-
-err_bau_disable:
-
-	for_each_possible_cpu(cur_cpu)
-		free_cpumask_var(per_cpu(uv_flush_tlb_mask, cur_cpu));
-
-	set_bau_off();
-	nobau_perm = 1;
-
-	return -EINVAL;
-}
-core_initcall(uv_bau_init);
-fs_initcall(uv_ptc_init);
