| Message ID | 20210222130735.1313443-7-djrscally@gmail.com (mailing list archive) |
|---|---|
| State | Changes Requested, archived |
| Headers | show |
| Series | Introduce intel_skl_int3472 module | expand |
On Mon, Feb 22, 2021 at 3:12 PM Daniel Scally <djrscally@gmail.com> wrote: > > This driver only covered one scenario in which ACPI devices with _HID > INT3472 are found, and its functionality has been taken over by the > intel-skl-int3472 module, so remove it. As long as patch 5 accepted Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > Signed-off-by: Daniel Scally <djrscally@gmail.com> > --- > Changes in v3: > - Replaced Kconfig dependencies with INTEL_SKL_INT3472 for the tps68470 > OpRegion and GPIO drivers. > > drivers/acpi/pmic/Kconfig | 2 +- > drivers/gpio/Kconfig | 2 +- > drivers/mfd/Kconfig | 18 -------- > drivers/mfd/Makefile | 1 - > drivers/mfd/tps68470.c | 97 --------------------------------------- > 5 files changed, 2 insertions(+), 118 deletions(-) > delete mode 100644 drivers/mfd/tps68470.c > > diff --git a/drivers/acpi/pmic/Kconfig b/drivers/acpi/pmic/Kconfig > index 56bbcb2ce61b..f84b8f6038dc 100644 > --- a/drivers/acpi/pmic/Kconfig > +++ b/drivers/acpi/pmic/Kconfig > @@ -52,7 +52,7 @@ endif # PMIC_OPREGION > > config TPS68470_PMIC_OPREGION > bool "ACPI operation region support for TPS68470 PMIC" > - depends on MFD_TPS68470 > + depends on INTEL_SKL_INT3472 > help > This config adds ACPI operation region support for TI TPS68470 PMIC. > TPS68470 device is an advanced power management unit that powers > diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig > index c70f46e80a3b..998898c72af8 100644 > --- a/drivers/gpio/Kconfig > +++ b/drivers/gpio/Kconfig > @@ -1343,7 +1343,7 @@ config GPIO_TPS65912 > > config GPIO_TPS68470 > bool "TPS68470 GPIO" > - depends on MFD_TPS68470 > + depends on INTEL_SKL_INT3472 > help > Select this option to enable GPIO driver for the TPS68470 > chip family. > diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig > index bdfce7b15621..9a1f648efde0 100644 > --- a/drivers/mfd/Kconfig > +++ b/drivers/mfd/Kconfig > @@ -1520,24 +1520,6 @@ config MFD_TPS65217 > This driver can also be built as a module. If so, the module > will be called tps65217. > > -config MFD_TPS68470 > - bool "TI TPS68470 Power Management / LED chips" > - depends on ACPI && PCI && I2C=y > - depends on I2C_DESIGNWARE_PLATFORM=y > - select MFD_CORE > - select REGMAP_I2C > - help > - If you say yes here you get support for the TPS68470 series of > - Power Management / LED chips. > - > - These include voltage regulators, LEDs and other features > - that are often used in portable devices. > - > - This option is a bool as it provides an ACPI operation > - region, which must be available before any of the devices > - using this are probed. This option also configures the > - designware-i2c driver to be built-in, for the same reason. > - > config MFD_TI_LP873X > tristate "TI LP873X Power Management IC" > depends on I2C > diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile > index 14fdb188af02..5994e812f479 100644 > --- a/drivers/mfd/Makefile > +++ b/drivers/mfd/Makefile > @@ -105,7 +105,6 @@ obj-$(CONFIG_MFD_TPS65910) += tps65910.o > obj-$(CONFIG_MFD_TPS65912) += tps65912-core.o > obj-$(CONFIG_MFD_TPS65912_I2C) += tps65912-i2c.o > obj-$(CONFIG_MFD_TPS65912_SPI) += tps65912-spi.o > -obj-$(CONFIG_MFD_TPS68470) += tps68470.o > obj-$(CONFIG_MFD_TPS80031) += tps80031.o > obj-$(CONFIG_MENELAUS) += menelaus.o > > diff --git a/drivers/mfd/tps68470.c b/drivers/mfd/tps68470.c > deleted file mode 100644 > index 4a4df4ffd18c..000000000000 > --- a/drivers/mfd/tps68470.c > +++ /dev/null > @@ -1,97 +0,0 @@ > -// SPDX-License-Identifier: GPL-2.0 > -/* > - * TPS68470 chip Parent driver > - * > - * Copyright (C) 2017 Intel Corporation > - * > - * Authors: > - * Rajmohan Mani <rajmohan.mani@intel.com> > - * Tianshu Qiu <tian.shu.qiu@intel.com> > - * Jian Xu Zheng <jian.xu.zheng@intel.com> > - * Yuning Pu <yuning.pu@intel.com> > - */ > - > -#include <linux/acpi.h> > -#include <linux/delay.h> > -#include <linux/i2c.h> > -#include <linux/init.h> > -#include <linux/mfd/core.h> > -#include <linux/mfd/tps68470.h> > -#include <linux/regmap.h> > - > -static const struct mfd_cell tps68470s[] = { > - { .name = "tps68470-gpio" }, > - { .name = "tps68470_pmic_opregion" }, > -}; > - > -static const struct regmap_config tps68470_regmap_config = { > - .reg_bits = 8, > - .val_bits = 8, > - .max_register = TPS68470_REG_MAX, > -}; > - > -static int tps68470_chip_init(struct device *dev, struct regmap *regmap) > -{ > - unsigned int version; > - int ret; > - > - /* Force software reset */ > - ret = regmap_write(regmap, TPS68470_REG_RESET, TPS68470_REG_RESET_MASK); > - if (ret) > - return ret; > - > - ret = regmap_read(regmap, TPS68470_REG_REVID, &version); > - if (ret) { > - dev_err(dev, "Failed to read revision register: %d\n", ret); > - return ret; > - } > - > - dev_info(dev, "TPS68470 REVID: 0x%x\n", version); > - > - return 0; > -} > - > -static int tps68470_probe(struct i2c_client *client) > -{ > - struct device *dev = &client->dev; > - struct regmap *regmap; > - int ret; > - > - regmap = devm_regmap_init_i2c(client, &tps68470_regmap_config); > - if (IS_ERR(regmap)) { > - dev_err(dev, "devm_regmap_init_i2c Error %ld\n", > - PTR_ERR(regmap)); > - return PTR_ERR(regmap); > - } > - > - i2c_set_clientdata(client, regmap); > - > - ret = tps68470_chip_init(dev, regmap); > - if (ret < 0) { > - dev_err(dev, "TPS68470 Init Error %d\n", ret); > - return ret; > - } > - > - ret = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE, tps68470s, > - ARRAY_SIZE(tps68470s), NULL, 0, NULL); > - if (ret < 0) { > - dev_err(dev, "devm_mfd_add_devices failed: %d\n", ret); > - return ret; > - } > - > - return 0; > -} > - > -static const struct acpi_device_id tps68470_acpi_ids[] = { > - {"INT3472"}, > - {}, > -}; > - > -static struct i2c_driver tps68470_driver = { > - .driver = { > - .name = "tps68470", > - .acpi_match_table = tps68470_acpi_ids, > - }, > - .probe_new = tps68470_probe, > -}; > -builtin_i2c_driver(tps68470_driver); > -- > 2.25.1 >
On 22/02/2021 14:12, Andy Shevchenko wrote: > On Mon, Feb 22, 2021 at 3:12 PM Daniel Scally <djrscally@gmail.com> wrote: >> This driver only covered one scenario in which ACPI devices with _HID >> INT3472 are found, and its functionality has been taken over by the >> intel-skl-int3472 module, so remove it. > As long as patch 5 accepted > Acked-by: Andy Shevchenko <andy.shevchenko@gmail.com> Great - thank you! And likewise for the R-bs on the previous patches, I'll follow all the comments for those
On Mon, 22 Feb 2021, Daniel Scally wrote: > This driver only covered one scenario in which ACPI devices with _HID > INT3472 are found, and its functionality has been taken over by the > intel-skl-int3472 module, so remove it. > > Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com> > Signed-off-by: Daniel Scally <djrscally@gmail.com> > --- > Changes in v3: > - Replaced Kconfig dependencies with INTEL_SKL_INT3472 for the tps68470 > OpRegion and GPIO drivers. > > drivers/acpi/pmic/Kconfig | 2 +- > drivers/gpio/Kconfig | 2 +- > drivers/mfd/Kconfig | 18 -------- > drivers/mfd/Makefile | 1 - > drivers/mfd/tps68470.c | 97 --------------------------------------- > 5 files changed, 2 insertions(+), 118 deletions(-) > delete mode 100644 drivers/mfd/tps68470.c Acked-by: Lee Jones <lee.jones@linaro.org>
diff --git a/drivers/acpi/pmic/Kconfig b/drivers/acpi/pmic/Kconfig index 56bbcb2ce61b..f84b8f6038dc 100644 --- a/drivers/acpi/pmic/Kconfig +++ b/drivers/acpi/pmic/Kconfig @@ -52,7 +52,7 @@ endif # PMIC_OPREGION config TPS68470_PMIC_OPREGION bool "ACPI operation region support for TPS68470 PMIC" - depends on MFD_TPS68470 + depends on INTEL_SKL_INT3472 help This config adds ACPI operation region support for TI TPS68470 PMIC. TPS68470 device is an advanced power management unit that powers diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig index c70f46e80a3b..998898c72af8 100644 --- a/drivers/gpio/Kconfig +++ b/drivers/gpio/Kconfig @@ -1343,7 +1343,7 @@ config GPIO_TPS65912 config GPIO_TPS68470 bool "TPS68470 GPIO" - depends on MFD_TPS68470 + depends on INTEL_SKL_INT3472 help Select this option to enable GPIO driver for the TPS68470 chip family. diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig index bdfce7b15621..9a1f648efde0 100644 --- a/drivers/mfd/Kconfig +++ b/drivers/mfd/Kconfig @@ -1520,24 +1520,6 @@ config MFD_TPS65217 This driver can also be built as a module. If so, the module will be called tps65217. -config MFD_TPS68470 - bool "TI TPS68470 Power Management / LED chips" - depends on ACPI && PCI && I2C=y - depends on I2C_DESIGNWARE_PLATFORM=y - select MFD_CORE - select REGMAP_I2C - help - If you say yes here you get support for the TPS68470 series of - Power Management / LED chips. - - These include voltage regulators, LEDs and other features - that are often used in portable devices. - - This option is a bool as it provides an ACPI operation - region, which must be available before any of the devices - using this are probed. This option also configures the - designware-i2c driver to be built-in, for the same reason. - config MFD_TI_LP873X tristate "TI LP873X Power Management IC" depends on I2C diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile index 14fdb188af02..5994e812f479 100644 --- a/drivers/mfd/Makefile +++ b/drivers/mfd/Makefile @@ -105,7 +105,6 @@ obj-$(CONFIG_MFD_TPS65910) += tps65910.o obj-$(CONFIG_MFD_TPS65912) += tps65912-core.o obj-$(CONFIG_MFD_TPS65912_I2C) += tps65912-i2c.o obj-$(CONFIG_MFD_TPS65912_SPI) += tps65912-spi.o -obj-$(CONFIG_MFD_TPS68470) += tps68470.o obj-$(CONFIG_MFD_TPS80031) += tps80031.o obj-$(CONFIG_MENELAUS) += menelaus.o diff --git a/drivers/mfd/tps68470.c b/drivers/mfd/tps68470.c deleted file mode 100644 index 4a4df4ffd18c..000000000000 --- a/drivers/mfd/tps68470.c +++ /dev/null @@ -1,97 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * TPS68470 chip Parent driver - * - * Copyright (C) 2017 Intel Corporation - * - * Authors: - * Rajmohan Mani <rajmohan.mani@intel.com> - * Tianshu Qiu <tian.shu.qiu@intel.com> - * Jian Xu Zheng <jian.xu.zheng@intel.com> - * Yuning Pu <yuning.pu@intel.com> - */ - -#include <linux/acpi.h> -#include <linux/delay.h> -#include <linux/i2c.h> -#include <linux/init.h> -#include <linux/mfd/core.h> -#include <linux/mfd/tps68470.h> -#include <linux/regmap.h> - -static const struct mfd_cell tps68470s[] = { - { .name = "tps68470-gpio" }, - { .name = "tps68470_pmic_opregion" }, -}; - -static const struct regmap_config tps68470_regmap_config = { - .reg_bits = 8, - .val_bits = 8, - .max_register = TPS68470_REG_MAX, -}; - -static int tps68470_chip_init(struct device *dev, struct regmap *regmap) -{ - unsigned int version; - int ret; - - /* Force software reset */ - ret = regmap_write(regmap, TPS68470_REG_RESET, TPS68470_REG_RESET_MASK); - if (ret) - return ret; - - ret = regmap_read(regmap, TPS68470_REG_REVID, &version); - if (ret) { - dev_err(dev, "Failed to read revision register: %d\n", ret); - return ret; - } - - dev_info(dev, "TPS68470 REVID: 0x%x\n", version); - - return 0; -} - -static int tps68470_probe(struct i2c_client *client) -{ - struct device *dev = &client->dev; - struct regmap *regmap; - int ret; - - regmap = devm_regmap_init_i2c(client, &tps68470_regmap_config); - if (IS_ERR(regmap)) { - dev_err(dev, "devm_regmap_init_i2c Error %ld\n", - PTR_ERR(regmap)); - return PTR_ERR(regmap); - } - - i2c_set_clientdata(client, regmap); - - ret = tps68470_chip_init(dev, regmap); - if (ret < 0) { - dev_err(dev, "TPS68470 Init Error %d\n", ret); - return ret; - } - - ret = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE, tps68470s, - ARRAY_SIZE(tps68470s), NULL, 0, NULL); - if (ret < 0) { - dev_err(dev, "devm_mfd_add_devices failed: %d\n", ret); - return ret; - } - - return 0; -} - -static const struct acpi_device_id tps68470_acpi_ids[] = { - {"INT3472"}, - {}, -}; - -static struct i2c_driver tps68470_driver = { - .driver = { - .name = "tps68470", - .acpi_match_table = tps68470_acpi_ids, - }, - .probe_new = tps68470_probe, -}; -builtin_i2c_driver(tps68470_driver);