@@ -118,51 +118,6 @@ static const unsigned long goodix_irq_flags[] = {
IRQ_TYPE_LEVEL_HIGH,
};
-/*
- * Those tablets have their coordinates origin at the bottom right
- * of the tablet, as if rotated 180 degrees
- */
-static const struct dmi_system_id rotated_screen[] = {
-#if defined(CONFIG_DMI) && defined(CONFIG_X86)
- {
- .ident = "Teclast X89",
- .matches = {
- /* tPAD is too generic, also match on bios date */
- DMI_MATCH(DMI_BOARD_VENDOR, "TECLAST"),
- DMI_MATCH(DMI_BOARD_NAME, "tPAD"),
- DMI_MATCH(DMI_BIOS_DATE, "12/19/2014"),
- },
- },
- {
- .ident = "Teclast X98 Pro",
- .matches = {
- /*
- * Only match BIOS date, because the manufacturers
- * BIOS does not report the board name at all
- * (sometimes)...
- */
- DMI_MATCH(DMI_BOARD_VENDOR, "TECLAST"),
- DMI_MATCH(DMI_BIOS_DATE, "10/28/2015"),
- },
- },
- {
- .ident = "WinBook TW100",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "WinBook"),
- DMI_MATCH(DMI_PRODUCT_NAME, "TW100")
- }
- },
- {
- .ident = "WinBook TW700",
- .matches = {
- DMI_MATCH(DMI_SYS_VENDOR, "WinBook"),
- DMI_MATCH(DMI_PRODUCT_NAME, "TW700")
- },
- },
-#endif
- {}
-};
-
static const struct dmi_system_id nine_bytes_report[] = {
#if defined(CONFIG_DMI) && defined(CONFIG_X86)
{
@@ -1086,13 +1041,6 @@ static int goodix_configure_dev(struct goodix_ts_data *ts)
ABS_MT_POSITION_Y, ts->prop.max_y);
}
- if (dmi_check_system(rotated_screen)) {
- ts->prop.invert_x = true;
- ts->prop.invert_y = true;
- dev_dbg(&ts->client->dev,
- "Applying '180 degrees rotated screen' quirk\n");
- }
-
if (dmi_check_system(nine_bytes_report)) {
ts->contact_size = 9;
@@ -273,6 +273,23 @@ static const struct ts_dmi_data estar_beauty_hd_data = {
.properties = estar_beauty_hd_props,
};
+/* Generic props + data for upside-down mounted GDIX1001 touchscreens */
+static const struct property_entry gdix1001_upside_down_props[] = {
+ PROPERTY_ENTRY_BOOL("touchscreen-inverted-x"),
+ PROPERTY_ENTRY_BOOL("touchscreen-inverted-y"),
+ { }
+};
+
+static const struct ts_dmi_data gdix1001_00_upside_down_data = {
+ .acpi_name = "GDIX1001:00",
+ .properties = gdix1001_upside_down_props,
+};
+
+static const struct ts_dmi_data gdix1001_01_upside_down_data = {
+ .acpi_name = "GDIX1001:01",
+ .properties = gdix1001_upside_down_props,
+};
+
static const struct property_entry gp_electronic_t701_props[] = {
PROPERTY_ENTRY_U32("touchscreen-size-x", 960),
PROPERTY_ENTRY_U32("touchscreen-size-y", 640),
@@ -1287,6 +1304,16 @@ const struct dmi_system_id touchscreen_dmi_table[] = {
DMI_MATCH(DMI_BOARD_NAME, "X3 Plus"),
},
},
+ {
+ /* Teclast X89 (Windows version / BIOS) */
+ .driver_data = (void *)&gdix1001_01_upside_down_data,
+ .matches = {
+ /* tPAD is too generic, also match on bios date */
+ DMI_MATCH(DMI_BOARD_VENDOR, "TECLAST"),
+ DMI_MATCH(DMI_BOARD_NAME, "tPAD"),
+ DMI_MATCH(DMI_BIOS_DATE, "12/19/2014"),
+ },
+ },
{
/* Teclast X98 Plus II */
.driver_data = (void *)&teclast_x98plus2_data,
@@ -1295,6 +1322,19 @@ const struct dmi_system_id touchscreen_dmi_table[] = {
DMI_MATCH(DMI_PRODUCT_NAME, "X98 Plus II"),
},
},
+ {
+ /* Teclast X98 Pro */
+ .driver_data = (void *)&gdix1001_00_upside_down_data,
+ .matches = {
+ /*
+ * Only match BIOS date, because the manufacturers
+ * BIOS does not report the board name at all
+ * (sometimes)...
+ */
+ DMI_MATCH(DMI_BOARD_VENDOR, "TECLAST"),
+ DMI_MATCH(DMI_BIOS_DATE, "10/28/2015"),
+ },
+ },
{
/* Trekstor Primebook C11 */
.driver_data = (void *)&trekstor_primebook_c11_data,
@@ -1370,6 +1410,22 @@ const struct dmi_system_id touchscreen_dmi_table[] = {
DMI_MATCH(DMI_PRODUCT_NAME, "VINGA Twizzle J116"),
},
},
+ {
+ /* "WinBook TW100" */
+ .driver_data = (void *)&gdix1001_00_upside_down_data,
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "WinBook"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "TW100")
+ }
+ },
+ {
+ /* WinBook TW700 */
+ .driver_data = (void *)&gdix1001_00_upside_down_data,
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "WinBook"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "TW700")
+ },
+ },
{
/* Yours Y8W81, same case and touchscreen as Chuwi Vi8 */
.driver_data = (void *)&chuwi_vi8_data,
Move the DMI quirks for upside-down mounted Goodix touchscreens from drivers/input/touchscreen/goodix.c to drivers/platform/x86/touchscreen_dmi.c, where all the other x86 touchscreen quirks live. Note the touchscreen_dmi.c code attaches standard touchscreen device-properties to an i2c-client device based on a combination of a DMI match + a device-name match. I've verified that the: Teclast X98 Pro, WinBook TW100 and WinBook TW700 uses an ACPI devicename of "GDIX1001:00" based on acpidumps and/or dmesg output available on the web. This patch was tested on a Teclast X89 tablet. Signed-off-by: Hans de Goede <hdegoede@redhat.com> --- drivers/input/touchscreen/goodix.c | 52 ------------------------ drivers/platform/x86/touchscreen_dmi.c | 56 ++++++++++++++++++++++++++ 2 files changed, 56 insertions(+), 52 deletions(-)