@@ -687,30 +687,6 @@ config INTEL_ATOMISP2_PM
To compile this driver as a module, choose M here: the module
will be called intel_atomisp2_pm.
-config INTEL_CHT_INT33FE
- tristate "Intel Cherry Trail ACPI INT33FE Driver"
- depends on X86 && ACPI && I2C && REGULATOR
- depends on CHARGER_BQ24190=y || (CHARGER_BQ24190=m && m)
- depends on USB_ROLES_INTEL_XHCI=y || (USB_ROLES_INTEL_XHCI=m && m)
- depends on TYPEC_MUX_PI3USB30532=y || (TYPEC_MUX_PI3USB30532=m && m)
- help
- This driver add support for the INT33FE ACPI device found on
- some Intel Cherry Trail devices.
-
- There are two kinds of INT33FE ACPI device possible: for hardware
- with USB Type-C and Micro-B connectors. This driver supports both.
-
- The INT33FE ACPI device has a CRS table with I2cSerialBusV2
- resources for Fuel Gauge Controller and (in the Type-C variant)
- FUSB302 USB Type-C Controller and PI3USB30532 USB switch.
- This driver instantiates i2c-clients for these, so that standard
- i2c drivers for these chips can bind to the them.
-
- If you enable this driver it is advised to also select
- CONFIG_BATTERY_BQ27XXX=m or CONFIG_BATTERY_BQ27XXX_I2C=m for Micro-B
- device and CONFIG_TYPEC_FUSB302=m and CONFIG_BATTERY_MAX17042=m
- for Type-C device.
-
config INTEL_HID_EVENT
tristate "INTEL HID Event"
depends on ACPI
@@ -70,10 +70,6 @@ obj-$(CONFIG_X86_PLATFORM_DRIVERS_INTEL) += intel/
obj-$(CONFIG_INTEL_ATOMISP2_LED) += intel_atomisp2_led.o
obj-$(CONFIG_INTEL_ATOMISP2_PM) += intel_atomisp2_pm.o
-obj-$(CONFIG_INTEL_CHT_INT33FE) += intel_cht_int33fe.o
-intel_cht_int33fe-objs := intel_cht_int33fe_common.o \
- intel_cht_int33fe_typec.o \
- intel_cht_int33fe_microb.o
obj-$(CONFIG_INTEL_HID_EVENT) += intel-hid.o
obj-$(CONFIG_INTEL_INT0002_VGPIO) += intel_int0002_vgpio.o
obj-$(CONFIG_INTEL_MENLOW) += intel_menlow.o
@@ -16,6 +16,7 @@ menuconfig X86_PLATFORM_DRIVERS_INTEL
if X86_PLATFORM_DRIVERS_INTEL
+source "drivers/platform/x86/intel/int33fe/Kconfig"
source "drivers/platform/x86/intel/int3472/Kconfig"
endif # X86_PLATFORM_DRIVERS_INTEL
@@ -4,4 +4,5 @@
# Intel x86 Platform-Specific Drivers
#
+obj-$(CONFIG_INTEL_CHT_INT33FE) += int33fe/
obj-$(CONFIG_INTEL_SKL_INT3472) += int3472/
new file mode 100644
@@ -0,0 +1,25 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config INTEL_CHT_INT33FE
+ tristate "Intel Cherry Trail ACPI INT33FE Driver"
+ depends on X86 && ACPI && I2C && REGULATOR
+ depends on CHARGER_BQ24190=y || (CHARGER_BQ24190=m && m)
+ depends on USB_ROLES_INTEL_XHCI=y || (USB_ROLES_INTEL_XHCI=m && m)
+ depends on TYPEC_MUX_PI3USB30532=y || (TYPEC_MUX_PI3USB30532=m && m)
+ help
+ This driver add support for the INT33FE ACPI device found on
+ some Intel Cherry Trail devices.
+
+ There are two kinds of INT33FE ACPI device possible: for hardware
+ with USB Type-C and Micro-B connectors. This driver supports both.
+
+ The INT33FE ACPI device has a CRS table with I2cSerialBusV2
+ resources for Fuel Gauge Controller and (in the Type-C variant)
+ FUSB302 USB Type-C Controller and PI3USB30532 USB switch.
+ This driver instantiates i2c-clients for these, so that standard
+ i2c drivers for these chips can bind to the them.
+
+ If you enable this driver it is advised to also select
+ CONFIG_BATTERY_BQ27XXX=m or CONFIG_BATTERY_BQ27XXX_I2C=m for Micro-B
+ device and CONFIG_TYPEC_FUSB302=m and CONFIG_BATTERY_MAX17042=m
+ for Type-C device.
+
new file mode 100644
@@ -0,0 +1,5 @@
+# SPDX-License-Identifier: GPL-2.0-only
+obj-$(CONFIG_INTEL_CHT_INT33FE) += intel_cht_int33fe.o
+intel_cht_int33fe-objs := intel_cht_int33fe_common.o \
+ intel_cht_int33fe_typec.o \
+ intel_cht_int33fe_microb.o
similarity index 100%
rename from drivers/platform/x86/intel_cht_int33fe_common.c
rename to drivers/platform/x86/intel/int33fe/intel_cht_int33fe_common.c
similarity index 100%
rename from drivers/platform/x86/intel_cht_int33fe_common.h
rename to drivers/platform/x86/intel/int33fe/intel_cht_int33fe_common.h
similarity index 100%
rename from drivers/platform/x86/intel_cht_int33fe_microb.c
rename to drivers/platform/x86/intel/int33fe/intel_cht_int33fe_microb.c
similarity index 100%
rename from drivers/platform/x86/intel_cht_int33fe_typec.c
rename to drivers/platform/x86/intel/int33fe/intel_cht_int33fe_typec.c
Since we have started collecting Intel x86 specific drivers in its own folder, Move intel_cht_int33fe to own subfolder there. Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> --- drivers/platform/x86/Kconfig | 24 ------------------ drivers/platform/x86/Makefile | 4 --- drivers/platform/x86/intel/Kconfig | 1 + drivers/platform/x86/intel/Makefile | 1 + drivers/platform/x86/intel/int33fe/Kconfig | 25 +++++++++++++++++++ drivers/platform/x86/intel/int33fe/Makefile | 5 ++++ .../int33fe}/intel_cht_int33fe_common.c | 0 .../int33fe}/intel_cht_int33fe_common.h | 0 .../int33fe}/intel_cht_int33fe_microb.c | 0 .../int33fe}/intel_cht_int33fe_typec.c | 0 10 files changed, 32 insertions(+), 28 deletions(-) create mode 100644 drivers/platform/x86/intel/int33fe/Kconfig create mode 100644 drivers/platform/x86/intel/int33fe/Makefile rename drivers/platform/x86/{ => intel/int33fe}/intel_cht_int33fe_common.c (100%) rename drivers/platform/x86/{ => intel/int33fe}/intel_cht_int33fe_common.h (100%) rename drivers/platform/x86/{ => intel/int33fe}/intel_cht_int33fe_microb.c (100%) rename drivers/platform/x86/{ => intel/int33fe}/intel_cht_int33fe_typec.c (100%)