diff mbox series

[RFC,2/2] platform/x86: toshiba_acpi: Add quirk for buttons on Z830

Message ID 20220911194934.558019-3-lkml@vorpal.se (mailing list archive)
State Changes Requested, archived
Headers show
Series Quickstart buttons driver and Toshiba Z830 | expand

Commit Message

Arvid Norlander Sept. 11, 2022, 7:49 p.m. UTC
The Z830 has some buttons that will only work properly as "quickstart"
buttons. To enable them in that mode, a value between 1 and 7 must be
used for HCI_HOTKEY_EVENT. Windows uses 0x5 on this laptop so use that for
maximum predictability and compatibility.

As there is not yet a known way of auto detection, this patch uses a DMI
quirk table. A module parameter is exposed to allow setting this on other
models for testing.

Signed-off-by: Arvid Norlander <lkml@vorpal.se>
---
 drivers/platform/x86/toshiba_acpi.c | 31 ++++++++++++++++++++++++++++-
 1 file changed, 30 insertions(+), 1 deletion(-)

Comments

Hans de Goede Sept. 19, 2022, 9:36 a.m. UTC | #1
Hi,

On 9/11/22 20:49, Arvid Norlander wrote:
> The Z830 has some buttons that will only work properly as "quickstart"
> buttons. To enable them in that mode, a value between 1 and 7 must be
> used for HCI_HOTKEY_EVENT. Windows uses 0x5 on this laptop so use that for
> maximum predictability and compatibility.
> 
> As there is not yet a known way of auto detection, this patch uses a DMI
> quirk table. A module parameter is exposed to allow setting this on other
> models for testing.
> 
> Signed-off-by: Arvid Norlander <lkml@vorpal.se>

Instead if adding a second dmi_system_id table please convert the existing one
into a generic quirk table. The idea is to make it look something like this:

#define QUIRK_TURN_ON_PANEL_ON_RESUME		BIT(0)
#define QUIRK_HCI_HOTKEY_QUICKSTART		BIT(1)

static const struct dmi_system_id toshiba_dmi_quirks[] = {
	{
	 /* Toshiba Portégé R700 */
	 /* https://bugzilla.kernel.org/show_bug.cgi?id=21012 */
	 .matches = {
		DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
		DMI_MATCH(DMI_PRODUCT_NAME, "PORTEGE R700"),
		},
	 .driver_data = (void *)QUIRK_TURN_ON_PANEL_ON_RESUME,
	},
	{
	 /* Toshiba Satellite/Portégé R830 */
	 /* Portégé: https://bugs.freedesktop.org/show_bug.cgi?id=82634 */
	 /* Satellite: https://bugzilla.kernel.org/show_bug.cgi?id=21012 */
	 .matches = {
		DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
		DMI_MATCH(DMI_PRODUCT_NAME, "R830"),
		},
	 .driver_data = (void *)QUIRK_TURN_ON_PANEL_ON_RESUME,
	},
	{
	 /* Toshiba Satellite/Portégé Z830 */
	 .matches = {
		DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
		DMI_MATCH(DMI_PRODUCT_NAME, "Z830"),
		},
	 .driver_data = (void *)QUIRK_TURN_ON_PANEL_ON_RESUME | QUIRK_HCI_HOTKEY_QUICKSTART,
	},
};

And then in toshiba_acpi_add() use:

	const struct dmi_system_id *dmi_id;
	long quirks = 0;

	dmi_id = dmi_first_match(toshiba_dmi_quirks);
	if (dmi_id)
		quirks = (long)dmi_id->driver_data;

	if (turn_on_panel_on_resume == -1)
		turn_on_panel_on_resume = !!(quirks & QUIRK_TURN_ON_PANEL_ON_RESUME);

	if (hci_hotkey_quickstart == -1)
		hci_hotkey_quickstart = !!(quirks & QUIRK_HCI_HOTKEY_QUICKSTART);

This avoids duplicating the DMI match for the Z830 models and will also make it easier
to add more DMI based quirks in the future.

Regards,

Hans




> ---
>  drivers/platform/x86/toshiba_acpi.c | 31 ++++++++++++++++++++++++++++-
>  1 file changed, 30 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c
> index 9f1394b73895..dce1f5049bf8 100644
> --- a/drivers/platform/x86/toshiba_acpi.c
> +++ b/drivers/platform/x86/toshiba_acpi.c
> @@ -58,6 +58,11 @@ module_param(turn_on_panel_on_resume, int, 0644);
>  MODULE_PARM_DESC(turn_on_panel_on_resume,
>  	"Call HCI_PANEL_POWER_ON on resume (-1 = auto, 0 = no, 1 = yes");
>  
> +static int hci_hotkey_quickstart = -1;
> +module_param(hci_hotkey_quickstart, int, 0644);
> +MODULE_PARM_DESC(hci_hotkey_quickstart,
> +	"Call HCI_HOTKEY_EVENT with value 0x5 for quickstart button support (-1 = auto, 0 = no, 1 = yes");
> +
>  #define TOSHIBA_WMI_EVENT_GUID "59142400-C6A3-40FA-BADB-8A2652834100"
>  
>  /* Scan code for Fn key on TOS1900 models */
> @@ -137,6 +142,7 @@ MODULE_PARM_DESC(turn_on_panel_on_resume,
>  #define HCI_ACCEL_MASK			0x7fff
>  #define HCI_ACCEL_DIRECTION_MASK	0x8000
>  #define HCI_HOTKEY_DISABLE		0x0b
> +#define HCI_HOTKEY_ENABLE_QUICKSTART	0x05
>  #define HCI_HOTKEY_ENABLE		0x09
>  #define HCI_HOTKEY_SPECIAL_FUNCTIONS	0x10
>  #define HCI_LCD_BRIGHTNESS_BITS		3
> @@ -2731,10 +2737,15 @@ static int toshiba_acpi_enable_hotkeys(struct toshiba_acpi_dev *dev)
>  		return -ENODEV;
>  
>  	/*
> +	 * Enable quickstart buttons if supported.
> +	 *
>  	 * Enable the "Special Functions" mode only if they are
>  	 * supported and if they are activated.
>  	 */
> -	if (dev->kbd_function_keys_supported && dev->special_functions)
> +	if (hci_hotkey_quickstart)
> +		result = hci_write(dev, HCI_HOTKEY_EVENT,
> +				   HCI_HOTKEY_ENABLE_QUICKSTART);
> +	else if (dev->kbd_function_keys_supported && dev->special_functions)
>  		result = hci_write(dev, HCI_HOTKEY_EVENT,
>  				   HCI_HOTKEY_SPECIAL_FUNCTIONS);
>  	else
> @@ -3287,6 +3298,21 @@ static const struct dmi_system_id turn_on_panel_on_resume_dmi_ids[] = {
>  	},
>  };
>  
> +/*
> + * Some Toshibas use "quickstart" keys. On these, HCI_HOTKEY_EVENT must use
> + * the value HCI_HOTKEY_ENABLE_QUICKSTART.
> + */
> +static const struct dmi_system_id hci_hotkey_quickstart_dmi_ids[] = {
> +	{
> +	 /* Toshiba Satellite/Portégé Z830 */
> +	 .matches = {
> +		DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
> +		DMI_MATCH(DMI_PRODUCT_NAME, "Z830"),
> +		},
> +	},
> +};
> +
> +
>  static int toshiba_acpi_add(struct acpi_device *acpi_dev)
>  {
>  	struct toshiba_acpi_dev *dev;
> @@ -3447,6 +3473,9 @@ static int toshiba_acpi_add(struct acpi_device *acpi_dev)
>  	if (turn_on_panel_on_resume == -1)
>  		turn_on_panel_on_resume = dmi_check_system(turn_on_panel_on_resume_dmi_ids);
>  
> +	if (hci_hotkey_quickstart == -1)
> +		hci_hotkey_quickstart = dmi_check_system(hci_hotkey_quickstart_dmi_ids);
> +
>  	toshiba_wwan_available(dev);
>  	if (dev->wwan_supported)
>  		toshiba_acpi_setup_wwan_rfkill(dev);
diff mbox series

Patch

diff --git a/drivers/platform/x86/toshiba_acpi.c b/drivers/platform/x86/toshiba_acpi.c
index 9f1394b73895..dce1f5049bf8 100644
--- a/drivers/platform/x86/toshiba_acpi.c
+++ b/drivers/platform/x86/toshiba_acpi.c
@@ -58,6 +58,11 @@  module_param(turn_on_panel_on_resume, int, 0644);
 MODULE_PARM_DESC(turn_on_panel_on_resume,
 	"Call HCI_PANEL_POWER_ON on resume (-1 = auto, 0 = no, 1 = yes");
 
+static int hci_hotkey_quickstart = -1;
+module_param(hci_hotkey_quickstart, int, 0644);
+MODULE_PARM_DESC(hci_hotkey_quickstart,
+	"Call HCI_HOTKEY_EVENT with value 0x5 for quickstart button support (-1 = auto, 0 = no, 1 = yes");
+
 #define TOSHIBA_WMI_EVENT_GUID "59142400-C6A3-40FA-BADB-8A2652834100"
 
 /* Scan code for Fn key on TOS1900 models */
@@ -137,6 +142,7 @@  MODULE_PARM_DESC(turn_on_panel_on_resume,
 #define HCI_ACCEL_MASK			0x7fff
 #define HCI_ACCEL_DIRECTION_MASK	0x8000
 #define HCI_HOTKEY_DISABLE		0x0b
+#define HCI_HOTKEY_ENABLE_QUICKSTART	0x05
 #define HCI_HOTKEY_ENABLE		0x09
 #define HCI_HOTKEY_SPECIAL_FUNCTIONS	0x10
 #define HCI_LCD_BRIGHTNESS_BITS		3
@@ -2731,10 +2737,15 @@  static int toshiba_acpi_enable_hotkeys(struct toshiba_acpi_dev *dev)
 		return -ENODEV;
 
 	/*
+	 * Enable quickstart buttons if supported.
+	 *
 	 * Enable the "Special Functions" mode only if they are
 	 * supported and if they are activated.
 	 */
-	if (dev->kbd_function_keys_supported && dev->special_functions)
+	if (hci_hotkey_quickstart)
+		result = hci_write(dev, HCI_HOTKEY_EVENT,
+				   HCI_HOTKEY_ENABLE_QUICKSTART);
+	else if (dev->kbd_function_keys_supported && dev->special_functions)
 		result = hci_write(dev, HCI_HOTKEY_EVENT,
 				   HCI_HOTKEY_SPECIAL_FUNCTIONS);
 	else
@@ -3287,6 +3298,21 @@  static const struct dmi_system_id turn_on_panel_on_resume_dmi_ids[] = {
 	},
 };
 
+/*
+ * Some Toshibas use "quickstart" keys. On these, HCI_HOTKEY_EVENT must use
+ * the value HCI_HOTKEY_ENABLE_QUICKSTART.
+ */
+static const struct dmi_system_id hci_hotkey_quickstart_dmi_ids[] = {
+	{
+	 /* Toshiba Satellite/Portégé Z830 */
+	 .matches = {
+		DMI_MATCH(DMI_SYS_VENDOR, "TOSHIBA"),
+		DMI_MATCH(DMI_PRODUCT_NAME, "Z830"),
+		},
+	},
+};
+
+
 static int toshiba_acpi_add(struct acpi_device *acpi_dev)
 {
 	struct toshiba_acpi_dev *dev;
@@ -3447,6 +3473,9 @@  static int toshiba_acpi_add(struct acpi_device *acpi_dev)
 	if (turn_on_panel_on_resume == -1)
 		turn_on_panel_on_resume = dmi_check_system(turn_on_panel_on_resume_dmi_ids);
 
+	if (hci_hotkey_quickstart == -1)
+		hci_hotkey_quickstart = dmi_check_system(hci_hotkey_quickstart_dmi_ids);
+
 	toshiba_wwan_available(dev);
 	if (dev->wwan_supported)
 		toshiba_acpi_setup_wwan_rfkill(dev);