diff mbox series

Add Silicom Platform Driver

Message ID 20230718160104.2716-1-henryshi2018@gmail.com (mailing list archive)
State Changes Requested, archived
Headers show
Series Add Silicom Platform Driver | expand

Commit Message

Henry Shi July 18, 2023, 4:01 p.m. UTC
The Silicom platform (silicom-platform) Linux driver for Swisscom
Business Box (Swisscom BB) as well as Cordoba family products is a 
software solution designed to facilitate the efficient management
and control of devices through the integration of various Linux
frameworks. This platform driver provides seamless support for
device management via the Linux LED framework, GPIO framework,
Hardware Monitoring (HWMON), and device attributes. The Silicom
platform driver's compatibility with these Linux frameworks allows
applications to access and control Cordoba family devices using
existing software that is compatible with these frameworks. This
compatibility simplifies the development process, reduces
dependencies on proprietary solutions, and promotes
interoperability with other Linux-based systems and software.

Signed-off-by: Henry Shi <henryshi2018@gmail.com>
---
 drivers/platform/x86/Kconfig            |   12 +
 drivers/platform/x86/Makefile           |    1 +
 drivers/platform/x86/silicom-platform.c | 1123 +++++++++++++++++++++++
 3 files changed, 1136 insertions(+)
 create mode 100644 drivers/platform/x86/silicom-platform.c

Comments

Guenter Roeck July 18, 2023, 4:40 p.m. UTC | #1
On 7/18/23 09:01, Henry Shi wrote:
> The Silicom platform (silicom-platform) Linux driver for Swisscom
> Business Box (Swisscom BB) as well as Cordoba family products is a
> software solution designed to facilitate the efficient management
> and control of devices through the integration of various Linux
> frameworks. This platform driver provides seamless support for
> device management via the Linux LED framework, GPIO framework,
> Hardware Monitoring (HWMON), and device attributes. The Silicom
> platform driver's compatibility with these Linux frameworks allows
> applications to access and control Cordoba family devices using
> existing software that is compatible with these frameworks. This
> compatibility simplifies the development process, reduces
> dependencies on proprietary solutions, and promotes
> interoperability with other Linux-based systems and software.
> 
> Signed-off-by: Henry Shi <henryshi2018@gmail.com>
> ---
>   drivers/platform/x86/Kconfig            |   12 +
>   drivers/platform/x86/Makefile           |    1 +
>   drivers/platform/x86/silicom-platform.c | 1123 +++++++++++++++++++++++
>   3 files changed, 1136 insertions(+)
>   create mode 100644 drivers/platform/x86/silicom-platform.c
> 
> diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
> index 22052031c719..8c0988c2b4ce 100644
> --- a/drivers/platform/x86/Kconfig
> +++ b/drivers/platform/x86/Kconfig
> @@ -188,6 +188,18 @@ config ACER_WMI
>   	  If you have an ACPI-WMI compatible Acer/ Wistron laptop, say Y or M
>   	  here.
>   
> +
> +config SILICOM_PLATFORM
> +	tristate "Silicom Edge Networking device support"
> +	depends on DMI
> +	select LEDS_CLASS_MULTICOLOR
> +	select GPIOLIB
> +	help
> +	  This option enables support for the LEDs/GPIO/etc downstream of the
> +	  embedded controller on Silicom "Cordoba" hardware and derivatives.
> +
> +	  If you have a Silicom network appliance, say Y or M here.
> +
>   source "drivers/platform/x86/amd/Kconfig"
>   
>   config ADV_SWBUTTON
> diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
> index 2cafe51ec4d8..f2f5743a9e54 100644
> --- a/drivers/platform/x86/Makefile
> +++ b/drivers/platform/x86/Makefile
> @@ -113,6 +113,7 @@ obj-$(CONFIG_SERIAL_MULTI_INSTANTIATE)	+= serial-multi-instantiate.o
>   obj-$(CONFIG_MLX_PLATFORM)		+= mlx-platform.o
>   obj-$(CONFIG_TOUCHSCREEN_DMI)		+= touchscreen_dmi.o
>   obj-$(CONFIG_WIRELESS_HOTKEY)		+= wireless-hotkey.o
> +obj-$(CONFIG_SILICOM_PLATFORM)          += silicom-platform.o
>   obj-$(CONFIG_X86_ANDROID_TABLETS)	+= x86-android-tablets/
>   
>   # Intel uncore drivers
> diff --git a/drivers/platform/x86/silicom-platform.c b/drivers/platform/x86/silicom-platform.c
> new file mode 100644
> index 000000000000..90431f733682
> --- /dev/null
> +++ b/drivers/platform/x86/silicom-platform.c
> @@ -0,0 +1,1123 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +//
> +// silicom-platform.c - Silicom MEC170x platform driver
> +//
> +// Copyright (C) 2023 Henry Shi <henrys@silicom-usa.com>
> +
> +#include <linux/dmi.h>
> +#include <linux/gpio/driver.h>
> +#include <linux/init.h>
> +#include <linux/ioport.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/led-class-multicolor.h>
> +#include <linux/module.h>
> +#include <linux/hwmon.h>
> +#include <linux/mutex.h>
> +#include <linux/platform_device.h>
> +#include <linux/string.h>
> +#include <linux/thermal.h>

What is this include for ?

> +#include <linux/kobject.h>
> +#include <linux/sysfs.h>
> +
> +#define MEC_ADDR ((mec_io_base) + 0x02)
> +#define MEC_DATA(byte) ((mec_io_base) + 0x04 + (byte))
> +#define EC_ADDR_LSB MEC_ADDR
> +#define EC_ADDR_MSB ((mec_io_base) + 0x03)
> +#define SILICOM_MEC_MAGIC 0x5a
> +#define OFFSET_BIT_TO_CHANNEL(off, bit) ((((off) + 0x014) << 3) | (bit))
> +#define CHANNEL_TO_OFFSET(chan) (((chan) >> 3) - 0x14)
> +#define CHANNEL_TO_BIT(chan) ((chan) & 0x07)
> +
> +static DEFINE_MUTEX(mec_io_mutex);
> +static int mec_io_base, mec_io_len;

mec_io_base is always 0x0800 and mec_io_len is always 0x8.
Why all that complexity with assigning values to those static
variables instead of just using defines ?

> +
> +struct silicom_fan_control_data {
> +	struct   device *hdev;
> +	int      temp;
> +	int      fan_speed;
> +};

I do not see the point of having this data structure. Values are
only written into it and never read.

> +
> +static const struct hwmon_channel_info *silicom_fan_control_info[] = {
> +	HWMON_CHANNEL_INFO(fan, HWMON_F_INPUT | HWMON_F_LABEL),
> +	HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT | HWMON_T_LABEL),
> +	NULL
> +};
> +
> +struct silicom_device_control_data {
> +	struct   device *my_dev;
> +	int      efuse_status;
> +	int      uc_version;
> +	int      power_cycle;
> +};
> +static struct silicom_device_control_data my_dev_ctl;
> +
> +struct silicom_platform_info {
> +	int io_base;
> +	int io_len;
> +	struct led_classdev_mc *led_info;
> +	struct gpio_chip *gpiochip;
> +	u8 *gpio_channels;
> +	u16 ngpio;
> +};
> +
> +static const char * const plat_0222_gpio_names[] = {
> +	"AUTOM0_SFP_TX_FAULT",
> +	"SLOT2_LED_OUT",
> +	"SIM_M2_SLOT2_B_DET",
> +	"SIM_M2_SLOT2_A_DET",
> +	"SLOT1_LED_OUT",
> +	"SIM_M2_SLOT1_B_DET",
> +	"SIM_M2_SLOT1_A_DET",
> +	"SLOT0_LED_OUT",
> +	"WAN_SFP0_RX_LOS",
> +	"WAN_SFP0_PRSNT_N",
> +	"WAN_SFP0_TX_FAULT",
> +	"AUTOM1_SFP_RX_LOS",
> +	"AUTOM1_SFP_PRSNT_N",
> +	"AUTOM1_SFP_TX_FAULT",
> +	"AUTOM0_SFP_RX_LOS",
> +	"AUTOM0_SFP_PRSNT_N",
> +	"WAN_SFP1_RX_LOS",
> +	"WAN_SFP1_PRSNT_N",
> +	"WAN_SFP1_TX_FAULT",
> +	"SIM_M2_SLOT1_MUX_SEL",
> +	"W_DISABLE_M2_SLOT1_N",
> +	"W_DISABLE_MPCIE_SLOT0_N",
> +	"W_DISABLE_M2_SLOT0_N",
> +	"BT_COMMAND_MODE",
> +	"WAN_SFP1_TX_DISABLE",
> +	"WAN_SFP0_TX_DISABLE",
> +	"AUTOM1_SFP_TX_DISABLE",
> +	"AUTOM0_SFP_TX_DISABLE",
> +	"SIM_M2_SLOT2_MUX_SEL",
> +	"W_DISABLE_M2_SLOT2_N",
> +	"RST_CTL_M2_SLOT_1_N",
> +	"RST_CTL_M2_SLOT_2_N",
> +	"PM_USB_PWR_EN_BOT",
> +	"PM_USB_PWR_EN_TOP",
> +};
> +
> +static u8 plat_0222_gpio_channels[] = {
> +	OFFSET_BIT_TO_CHANNEL(0x00, 0),
> +	OFFSET_BIT_TO_CHANNEL(0x00, 1),
> +	OFFSET_BIT_TO_CHANNEL(0x00, 2),
> +	OFFSET_BIT_TO_CHANNEL(0x00, 3),
> +	OFFSET_BIT_TO_CHANNEL(0x00, 4),
> +	OFFSET_BIT_TO_CHANNEL(0x00, 5),
> +	OFFSET_BIT_TO_CHANNEL(0x00, 6),
> +	OFFSET_BIT_TO_CHANNEL(0x00, 7),
> +	OFFSET_BIT_TO_CHANNEL(0x01, 0),
> +	OFFSET_BIT_TO_CHANNEL(0x01, 1),
> +	OFFSET_BIT_TO_CHANNEL(0x01, 2),
> +	OFFSET_BIT_TO_CHANNEL(0x01, 3),
> +	OFFSET_BIT_TO_CHANNEL(0x01, 4),
> +	OFFSET_BIT_TO_CHANNEL(0x01, 5),
> +	OFFSET_BIT_TO_CHANNEL(0x01, 6),
> +	OFFSET_BIT_TO_CHANNEL(0x01, 7),
> +	OFFSET_BIT_TO_CHANNEL(0x02, 0),
> +	OFFSET_BIT_TO_CHANNEL(0x02, 1),
> +	OFFSET_BIT_TO_CHANNEL(0x02, 2),
> +	OFFSET_BIT_TO_CHANNEL(0x09, 0),
> +	OFFSET_BIT_TO_CHANNEL(0x09, 1),
> +	OFFSET_BIT_TO_CHANNEL(0x09, 2),
> +	OFFSET_BIT_TO_CHANNEL(0x09, 3),
> +	OFFSET_BIT_TO_CHANNEL(0x0a, 0),
> +	OFFSET_BIT_TO_CHANNEL(0x0a, 1),
> +	OFFSET_BIT_TO_CHANNEL(0x0a, 2),
> +	OFFSET_BIT_TO_CHANNEL(0x0a, 3),
> +	OFFSET_BIT_TO_CHANNEL(0x0a, 4),
> +	OFFSET_BIT_TO_CHANNEL(0x0a, 5),
> +	OFFSET_BIT_TO_CHANNEL(0x0a, 6),
> +	OFFSET_BIT_TO_CHANNEL(0x0b, 0),
> +	OFFSET_BIT_TO_CHANNEL(0x0b, 1),
> +	OFFSET_BIT_TO_CHANNEL(0x0b, 2),
> +	OFFSET_BIT_TO_CHANNEL(0x0b, 3),
> +};
> +
> +static int silicom_gpio_get_direction(struct gpio_chip *gc, unsigned int offset);
> +static int silicom_gpio_direction_input(struct gpio_chip *gc, unsigned int offset);
> +static int silicom_gpio_direction_output(struct gpio_chip *gc, unsigned int offset, int value);
> +static int silicom_gpio_get(struct gpio_chip *gc, unsigned int offset);
> +static void silicom_gpio_set(struct gpio_chip *gc, unsigned int offset, int value);
> +static void silicom_mec_led_mc_brightness_set(struct led_classdev *led_cdev,
> +					      enum led_brightness brightness);
> +static enum led_brightness silicom_mec_led_mc_brightness_get(struct led_classdev *led_cdev);
> +static struct platform_device *silicom_platform_dev;
> +static struct led_classdev_mc *silicom_led_info __initdata;
> +static struct gpio_chip *silicom_gpiochip __initdata;
> +static u8 *silicom_gpio_channels __initdata;
> +static struct gpio_chip silicom_gpio_chip = {
> +	.label = "silicom-gpio",
> +	.get_direction = silicom_gpio_get_direction,
> +	.direction_input = silicom_gpio_direction_input,
> +	.direction_output = silicom_gpio_direction_output,
> +	.get = silicom_gpio_get,
> +	.set = silicom_gpio_set,
> +	.base = -1,
> +	.ngpio = ARRAY_SIZE(plat_0222_gpio_channels),
> +	.names = plat_0222_gpio_names,
> +	/* We're using a mutex to protect the indirect access, so we can sleep if the lock blocks */
> +	.can_sleep = true,
> +};
> +
> +static struct mc_subled plat_0222_wan_mc_subled_info[] __initdata = {
> +	{
> +		.color_index = LED_COLOR_ID_WHITE,
> +		.brightness = 1,
> +		.intensity = 0,
> +		.channel = OFFSET_BIT_TO_CHANNEL(0x0c, 7),
> +	},
> +	{
> +		.color_index = LED_COLOR_ID_YELLOW,
> +		.brightness = 1,
> +		.intensity = 0,
> +		.channel = OFFSET_BIT_TO_CHANNEL(0x0c, 6),
> +	},
> +	{
> +		.color_index = LED_COLOR_ID_RED,
> +		.brightness = 1,
> +		.intensity = 0,
> +		.channel = OFFSET_BIT_TO_CHANNEL(0x0c, 5),
> +	},
> +};
> +
> +static struct mc_subled plat_0222_sys_mc_subled_info[] __initdata = {
> +	{
> +		.color_index = LED_COLOR_ID_WHITE,
> +		.brightness = 1,
> +		.intensity = 0,
> +		.channel = OFFSET_BIT_TO_CHANNEL(0x0c, 4),
> +	},
> +	{
> +		.color_index = LED_COLOR_ID_AMBER,
> +		.brightness = 1,
> +		.intensity = 0,
> +		.channel = OFFSET_BIT_TO_CHANNEL(0x0c, 3),
> +	},
> +	{
> +		.color_index = LED_COLOR_ID_RED,
> +		.brightness = 1,
> +		.intensity = 0,
> +		.channel = OFFSET_BIT_TO_CHANNEL(0x0c, 2),
> +	},
> +};
> +
> +static struct mc_subled plat_0222_stat1_mc_subled_info[] __initdata = {
> +	{
> +		.color_index = LED_COLOR_ID_RED,
> +		.brightness = 1,
> +		.intensity = 0,
> +		.channel = OFFSET_BIT_TO_CHANNEL(0x0c, 1),
> +	},
> +	{
> +		.color_index = LED_COLOR_ID_GREEN,
> +		.brightness = 1,
> +		.intensity = 0,
> +		.channel = OFFSET_BIT_TO_CHANNEL(0x0c, 0),
> +	},
> +	{
> +		.color_index = LED_COLOR_ID_BLUE,
> +		.brightness = 1,
> +		.intensity = 0,
> +		.channel = OFFSET_BIT_TO_CHANNEL(0x0d, 7),
> +	},
> +	{
> +		.color_index = LED_COLOR_ID_YELLOW,
> +		.brightness = 1,
> +		.intensity = 0,
> +		.channel = OFFSET_BIT_TO_CHANNEL(0x0d, 6),
> +	},
> +};
> +
> +static struct mc_subled plat_0222_stat2_mc_subled_info[] __initdata = {
> +	{
> +		.color_index = LED_COLOR_ID_RED,
> +		.brightness = 1,
> +		.intensity = 0,
> +		.channel = OFFSET_BIT_TO_CHANNEL(0x0d, 5),
> +	},
> +	{
> +		.color_index = LED_COLOR_ID_GREEN,
> +		.brightness = 1,
> +		.intensity = 0,
> +		.channel = OFFSET_BIT_TO_CHANNEL(0x0d, 4),
> +	},
> +	{
> +		.color_index = LED_COLOR_ID_BLUE,
> +		.brightness = 1,
> +		.intensity = 0,
> +		.channel = OFFSET_BIT_TO_CHANNEL(0x0d, 3),
> +	},
> +	{
> +		.color_index = LED_COLOR_ID_YELLOW,
> +		.brightness = 1,
> +		.intensity = 0,
> +		.channel = OFFSET_BIT_TO_CHANNEL(0x0d, 2),
> +	},
> +};
> +
> +static struct mc_subled plat_0222_stat3_mc_subled_info[] __initdata = {
> +	{
> +		.color_index = LED_COLOR_ID_RED,
> +		.brightness = 1,
> +		.intensity = 0,
> +		.channel = OFFSET_BIT_TO_CHANNEL(0x0d, 1),
> +	},
> +	{
> +		.color_index = LED_COLOR_ID_GREEN,
> +		.brightness = 1,
> +		.intensity = 0,
> +		.channel = OFFSET_BIT_TO_CHANNEL(0x0d, 0),
> +	},
> +	{
> +		.color_index = LED_COLOR_ID_BLUE,
> +		.brightness = 1,
> +		.intensity = 0,
> +		.channel = OFFSET_BIT_TO_CHANNEL(0x0e, 1),
> +	},
> +	{
> +		.color_index = LED_COLOR_ID_YELLOW,
> +		.brightness = 1,
> +		.intensity = 0,
> +		.channel = OFFSET_BIT_TO_CHANNEL(0x0e, 0),
> +	},
> +};
> +
> +static struct led_classdev_mc plat_0222_mc_led_info[] __initdata = {
> +	{
> +		.led_cdev = {
> +			.name = "multicolor:wan",
> +			.brightness = 0,
> +			.max_brightness = 1,
> +			.brightness_set = silicom_mec_led_mc_brightness_set,
> +			.brightness_get = silicom_mec_led_mc_brightness_get,
> +		},
> +		.num_colors = ARRAY_SIZE(plat_0222_wan_mc_subled_info),
> +		.subled_info = plat_0222_wan_mc_subled_info,
> +	},
> +	{
> +		.led_cdev = {
> +			.name = "multicolor:sys",
> +			.brightness = 0,
> +			.max_brightness = 1,
> +			.brightness_set = silicom_mec_led_mc_brightness_set,
> +			.brightness_get = silicom_mec_led_mc_brightness_get,
> +		},
> +		.num_colors = ARRAY_SIZE(plat_0222_sys_mc_subled_info),
> +		.subled_info = plat_0222_sys_mc_subled_info,
> +	},
> +	{
> +		.led_cdev = {
> +			.name = "multicolor:stat1",
> +			.brightness = 0,
> +			.max_brightness = 1,
> +			.brightness_set = silicom_mec_led_mc_brightness_set,
> +			.brightness_get = silicom_mec_led_mc_brightness_get,
> +		},
> +		.num_colors = ARRAY_SIZE(plat_0222_stat1_mc_subled_info),
> +		.subled_info = plat_0222_stat1_mc_subled_info,
> +	},
> +	{
> +		.led_cdev = {
> +			.name = "multicolor:stat2",
> +			.brightness = 0,
> +			.max_brightness = 1,
> +			.brightness_set = silicom_mec_led_mc_brightness_set,
> +			.brightness_get = silicom_mec_led_mc_brightness_get,
> +		},
> +		.num_colors = ARRAY_SIZE(plat_0222_stat2_mc_subled_info),
> +		.subled_info = plat_0222_stat2_mc_subled_info,
> +	},
> +	{
> +		.led_cdev = {
> +			.name = "multicolor:stat3",
> +			.brightness = 0,
> +			.max_brightness = 1,
> +			.brightness_set = silicom_mec_led_mc_brightness_set,
> +			.brightness_get = silicom_mec_led_mc_brightness_get,
> +		},
> +		.num_colors = ARRAY_SIZE(plat_0222_stat3_mc_subled_info),
> +		.subled_info = plat_0222_stat3_mc_subled_info,
> +	},
> +	{ },
> +};
> +
> +static struct silicom_platform_info silicom_plat_0222_cordoba_info __initdata = {
> +	.io_base = 0x800,
> +	.io_len = 8,
> +	.led_info = plat_0222_mc_led_info,
> +	.gpiochip = &silicom_gpio_chip,
> +	.gpio_channels = plat_0222_gpio_channels,
> +	/* The original generic cordoba does not have the last 4 outputs of the plat_0222 BB variant,
> +	 * the rest are the same, so use the same longer list, but ignore the last entries here
> +	 */
> +	.ngpio = ARRAY_SIZE(plat_0222_gpio_channels),
> +
> +};
> +
> +static struct mc_subled cordoba_fp_left_mc_subled_info[] __initdata = {
> +	{
> +		.color_index = LED_COLOR_ID_RED,
> +		.brightness = 1,
> +		.intensity = 0,
> +		.channel = OFFSET_BIT_TO_CHANNEL(0x08, 6),
> +	},
> +	{
> +		.color_index = LED_COLOR_ID_GREEN,
> +		.brightness = 1,
> +		.intensity = 0,
> +		.channel = OFFSET_BIT_TO_CHANNEL(0x08, 5),
> +	},
> +	{
> +		.color_index = LED_COLOR_ID_BLUE,
> +		.brightness = 1,
> +		.intensity = 0,
> +		.channel = OFFSET_BIT_TO_CHANNEL(0x09, 7),
> +	},
> +	{
> +		.color_index = LED_COLOR_ID_AMBER,
> +		.brightness = 1,
> +		.intensity = 0,
> +		.channel = OFFSET_BIT_TO_CHANNEL(0x09, 4),
> +	},
> +};
> +
> +static struct mc_subled cordoba_fp_center_mc_subled_info[] __initdata = {
> +	{
> +		.color_index = LED_COLOR_ID_RED,
> +		.brightness = 1,
> +		.intensity = 0,
> +		.channel = OFFSET_BIT_TO_CHANNEL(0x08, 7),
> +	},
> +	{
> +		.color_index = LED_COLOR_ID_GREEN,
> +		.brightness = 1,
> +		.intensity = 0,
> +		.channel = OFFSET_BIT_TO_CHANNEL(0x08, 4),
> +	},
> +	{
> +		.color_index = LED_COLOR_ID_BLUE,
> +		.brightness = 1,
> +		.intensity = 0,
> +		.channel = OFFSET_BIT_TO_CHANNEL(0x08, 3),
> +	},
> +	{
> +		.color_index = LED_COLOR_ID_AMBER,
> +		.brightness = 1,
> +		.intensity = 0,
> +		.channel = OFFSET_BIT_TO_CHANNEL(0x09, 6),
> +	},
> +};
> +
> +static struct mc_subled cordoba_fp_right_mc_subled_info[] __initdata = {
> +	{
> +		.color_index = LED_COLOR_ID_RED,
> +		.brightness = 1,
> +		.intensity = 0,
> +		.channel = OFFSET_BIT_TO_CHANNEL(0x08, 2),
> +	},
> +	{
> +		.color_index = LED_COLOR_ID_GREEN,
> +		.brightness = 1,
> +		.intensity = 0,
> +		.channel = OFFSET_BIT_TO_CHANNEL(0x08, 1),
> +	},
> +	{
> +		.color_index = LED_COLOR_ID_BLUE,
> +		.brightness = 1,
> +		.intensity = 0,
> +		.channel = OFFSET_BIT_TO_CHANNEL(0x08, 0),
> +	},
> +	{
> +		.color_index = LED_COLOR_ID_AMBER,
> +		.brightness = 1,
> +		.intensity = 0,
> +		.channel = OFFSET_BIT_TO_CHANNEL(0x09, 5),
> +	},
> +};
> +
> +static struct led_classdev_mc cordoba_mc_led_info[] __initdata = {
> +	{
> +		.led_cdev = {
> +			.name = "multicolor:fp_left",
> +			.brightness = 0,
> +			.max_brightness = 1,
> +			.brightness_set = silicom_mec_led_mc_brightness_set,
> +			.brightness_get = silicom_mec_led_mc_brightness_get,
> +		},
> +		.num_colors = ARRAY_SIZE(cordoba_fp_left_mc_subled_info),
> +		.subled_info = cordoba_fp_left_mc_subled_info,
> +	},
> +	{
> +		.led_cdev = {
> +			.name = "multicolor:fp_center",
> +			.brightness = 0,
> +			.max_brightness = 1,
> +			.brightness_set = silicom_mec_led_mc_brightness_set,
> +			.brightness_get = silicom_mec_led_mc_brightness_get,
> +		},
> +		.num_colors = ARRAY_SIZE(cordoba_fp_center_mc_subled_info),
> +		.subled_info = cordoba_fp_center_mc_subled_info,
> +	},
> +	{
> +		.led_cdev = {
> +			.name = "multicolor:fp_right",
> +			.brightness = 0,
> +			.max_brightness = 1,
> +			.brightness_set = silicom_mec_led_mc_brightness_set,
> +			.brightness_get = silicom_mec_led_mc_brightness_get,
> +		},
> +		.num_colors = ARRAY_SIZE(cordoba_fp_right_mc_subled_info),
> +		.subled_info = cordoba_fp_right_mc_subled_info,
> +	},
> +	{ },
> +};
> +
> +static struct silicom_platform_info silicom_generic_cordoba_info __initdata = {
> +	.io_base = 0x800,
> +	.io_len = 8,
> +	.led_info = cordoba_mc_led_info,
> +	.gpiochip = &silicom_gpio_chip,
> +	.gpio_channels = plat_0222_gpio_channels,
> +	.ngpio = ARRAY_SIZE(plat_0222_gpio_channels),
> +};
> +
> +static struct platform_driver silicom_platform_driver = {
> +	.driver = {
> +		.name = "silicom-platform",
> +	},
> +};
> +
> +void lock_io_modules(void)
> +{
> +	mutex_lock(&mec_io_mutex);
> +}
> +EXPORT_SYMBOL(lock_io_modules);
> +
> +void unlock_io_modules(void)
> +{
> +	mutex_unlock(&mec_io_mutex);
> +}
> +EXPORT_SYMBOL(unlock_io_modules);
> +
> +static ssize_t efuse_status_show(struct device *dev, struct device_attribute *attr,
> +		      char *buf)
> +{
> +	u32 reg;
> +	u32 bank = 0;
> +	u32 offset = 0x28;
> +	u32 byte_pos = 0;
> +
> +	mutex_lock(&mec_io_mutex);
> +	/* Select memory region */
> +	outb(bank, EC_ADDR_MSB);
> +	outb(offset, EC_ADDR_LSB);
> +
> +	/* Get current date from the address */
> +	reg = inl(MEC_DATA(byte_pos));
> +	mutex_unlock(&mec_io_mutex);
> +
> +	my_dev_ctl.efuse_status = reg & 0x1;
> +
> +	return sprintf(buf, "%d\n", my_dev_ctl.efuse_status);
> +}
> +
> +static ssize_t uc_version_show(struct device *dev,
> +			       struct device_attribute *attr,
> +			       char *buf)
> +{
> +	u32 reg;
> +	u32 bank = 0;
> +	u32 offset = 0x0;
> +	u32 byte_pos = 0;
> +	int uc_version;
> +
> +	mutex_lock(&mec_io_mutex);
> +	outb(bank, EC_ADDR_MSB);
> +	outb(offset, EC_ADDR_LSB);
> +
> +	reg = inl(MEC_DATA(byte_pos));
> +	mutex_unlock(&mec_io_mutex);
> +
> +	uc_version = (reg >> 8) & 0xFF;
> +	if (uc_version >= 64 && uc_version < 128) {
> +		uc_version = uc_version - 64;
> +		if (uc_version < 10)
> +			uc_version = 100 + uc_version;
> +		else
> +			uc_version = 100 + 10 * (uc_version / 10) + uc_version % 10;
> +	} else if (uc_version >= 128 && uc_version < 192) {
> +		uc_version = uc_version - 128;
> +		if (uc_version < 10)
> +			uc_version = 200 + uc_version;
> +		else
> +			uc_version = 200 + 10 * (uc_version / 10) + uc_version % 10;
> +	}
> +	my_dev_ctl.uc_version = uc_version;
> +	return sprintf(buf, "%d\n", my_dev_ctl.uc_version);
> +}
> +
> +static ssize_t power_cycle_show(struct device *dev,
> +				struct device_attribute *attr,
> +				char *buf)
> +{
> +	return sprintf(buf, "%d\n", my_dev_ctl.power_cycle);
> +}
> +
> +static void powercycle_uc(void)
> +{
> +	u32 bank = 0;
> +	u32 offset = 0x24;
> +	u32 byte_pos = 0;
> +
> +	mutex_lock(&mec_io_mutex);
> +	/* Select memory region */
> +	outb(bank, EC_ADDR_MSB);
> +	outb(offset, EC_ADDR_LSB);
> +
> +	/* Set to 1 for current date from the address */
> +	outb(1, MEC_DATA(byte_pos));
> +	mutex_unlock(&mec_io_mutex);
> +}
> +
> +static ssize_t power_cycle_store(struct device *dev, struct device_attribute *attr,
> +				 const char *buf, size_t count)
> +{
> +	if (sscanf(buf, "%du", &my_dev_ctl.power_cycle) != 1) {
> +		dev_err(dev, "Failed to read power_cycle\n");
> +		return -EINVAL;
> +	}
> +	if (my_dev_ctl.power_cycle > 0)
> +		powercycle_uc();
> +
> +	return count;
> +}
> +
> +static struct device_attribute my_dev_attr[] = {
> +	{
> +		.attr = {.name = "efuse_status", .mode = 0644},
> +		.show = efuse_status_show,
> +		.store = NULL
> +	},
> +	{
> +		.attr = {.name = "uc_version", .mode = 0644},
> +		.show = uc_version_show,
> +		.store = NULL
> +	},
> +	{
> +		.attr = {.name = "power_cycle", .mode = 0644},
> +		.show = power_cycle_show,
> +		.store = power_cycle_store
> +	},
> +};
> +
> +static int silicom_gpio_get_direction(struct gpio_chip *gc, unsigned int offset)
> +{
> +	u8 *channels = gpiochip_get_data(gc);
> +
> +	/* Input registers have offsets between [0x00, 0x07] */
> +	if (CHANNEL_TO_OFFSET(channels[offset]) < 0x08)
> +		return GPIO_LINE_DIRECTION_IN;
> +
> +	return GPIO_LINE_DIRECTION_OUT;
> +}
> +
> +static int silicom_gpio_direction_input(struct gpio_chip *gc, unsigned int offset)
> +{
> +	int direction = silicom_gpio_get_direction(gc, offset);
> +
> +	return direction == GPIO_LINE_DIRECTION_IN ? 0 : -EINVAL;
> +}
> +
> +static void silicom_gpio_set(struct gpio_chip *gc, unsigned int offset, int value)
> +{
> +	u8 *channels = gpiochip_get_data(gc);
> +	int direction = silicom_gpio_get_direction(gc, offset);
> +	int channel = channels[offset];
> +	u8 reg;
> +
> +	if (direction == GPIO_LINE_DIRECTION_IN)
> +		return;
> +
> +	mutex_lock(&mec_io_mutex);
> +	/* Get the dword offset from the channel */
> +	outb((channel >> 3) & 0xfc, MEC_ADDR);
> +
> +	/* Get the current register */
> +	reg = inb(MEC_DATA((channel >> 3) & 0x03));
> +	if (value == 0)
> +		reg &= ~(1 << (channel & 0x7));
> +	else if (value > 0)
> +		reg |= 1 << (channel & 0x7);
> +	else
> +		pr_err("Invalid GPIO value: %d\n", value);
> +	outb(reg, MEC_DATA((channel >> 3) & 0x03));
> +	mutex_unlock(&mec_io_mutex);
> +}
> +
> +static int silicom_gpio_direction_output(struct gpio_chip *gc, unsigned int offset, int value)
> +{
> +	int direction = silicom_gpio_get_direction(gc, offset);
> +
> +	if (direction == GPIO_LINE_DIRECTION_IN)
> +		return -EINVAL;
> +
> +	silicom_gpio_set(gc, offset, value);
> +
> +	return 0;
> +}
> +
> +static int silicom_gpio_get(struct gpio_chip *gc, unsigned int offset)
> +{
> +	u8 *channels = gpiochip_get_data(gc);
> +	int channel = channels[offset];
> +	u8 reg;
> +
> +	mutex_lock(&mec_io_mutex);
> +	/* Get the dword offset from the channel */
> +	outb((channel >> 3) & 0xfc, MEC_ADDR);
> +
> +	/* Get the current register */
> +	reg = inb(MEC_DATA((channel >> 3) & 0x03));
> +	mutex_unlock(&mec_io_mutex);
> +
> +	return (reg >> (channel & 0x7)) & 0x01;
> +}
> +
> +static int __init silicom_mc_leds_register(struct device *dev,
> +					   const struct led_classdev_mc *mc_leds)
> +{
> +	struct led_classdev_mc *led;
> +	int i, err;
> +
> +	for (i = 0; mc_leds[i].led_cdev.name; i++) {
> +		/* allocate and copy data from the init constansts */
> +		led = devm_kzalloc(dev, sizeof(struct led_classdev_mc), GFP_KERNEL);
> +		if (IS_ERR_OR_NULL(led)) {
> +			dev_err(dev, "Failed to alloc led_classdev_mc[%d]: %ld\n", i, PTR_ERR(led));
> +			return -ENOMEM;
> +		}
> +		memcpy(led, &mc_leds[i], sizeof(*led));
> +
> +		led->subled_info = devm_kzalloc(dev, led->num_colors * sizeof(struct mc_subled),
> +						GFP_KERNEL);
> +		if (IS_ERR_OR_NULL(led->subled_info)) {
> +			dev_err(dev, "Failed to alloc subled_info[%d]: %ld\n",
> +				i, PTR_ERR(led->subled_info));
> +			return -ENOMEM;
> +		}
> +		memcpy(led->subled_info, mc_leds[i].subled_info,
> +			led->num_colors * sizeof(struct mc_subled));
> +
> +		err = devm_led_classdev_multicolor_register(dev, led);
> +		if (err) {
> +			dev_err(dev, "Failed to register[%d]: %d\n", i, err);
> +			return err;
> +		}
> +	}
> +
> +	return 0;
> +}
> +
> +static void silicom_mec_led_set(int channel, int on)
> +{
> +	u8 reg;
> +
> +	mutex_lock(&mec_io_mutex);
> +	/* Get the dword offset from the channel */
> +	outb((channel >> 3) & 0xfc, MEC_ADDR);
> +
> +	/* Get the current LED settings */
> +	reg = inb(MEC_DATA((channel >> 3) & 0x03));
> +
> +	/* Outputs are active low, so clear the bit for on, or set it for off */
> +	if (on)
> +		reg &= ~(1 << (channel & 0x7));
> +	else
> +		reg |= 1 << (channel & 0x7);
> +
> +	/* Write back the updated register */
> +	outb(reg, MEC_DATA((channel >> 3) & 0x03));
> +
> +	mutex_unlock(&mec_io_mutex);
> +}
> +
> +static void silicom_mec_led_mc_brightness_set(struct led_classdev *led_cdev,
> +					      enum led_brightness brightness)
> +{
> +	struct led_classdev_mc *mc_cdev = lcdev_to_mccdev(led_cdev);
> +	int i;
> +
> +	led_mc_calc_color_components(mc_cdev, brightness);
> +
> +	for (i = 0; i < mc_cdev->num_colors; i++) {
> +		silicom_mec_led_set(mc_cdev->subled_info[i].channel,
> +				    mc_cdev->subled_info[i].brightness);
> +	}
> +}
> +
> +static enum led_brightness silicom_mec_led_get(int channel)
> +{
> +	u8 reg;
> +
> +	mutex_lock(&mec_io_mutex);
> +	/* Get the dword offset of the register for this LED from the channel */
> +	outb((channel >> 3) & 0xfc, MEC_ADDR);
> +	/* Get the current LED settings */
> +	reg = inb(MEC_DATA((channel >> 3) & 0x03));
> +	mutex_unlock(&mec_io_mutex);
> +
> +	/* Outputs are active low */
> +	return reg & (1 << (channel & 0x7)) ? LED_OFF : LED_ON;
> +}
> +
> +static enum led_brightness silicom_mec_led_mc_brightness_get(struct led_classdev *led_cdev)
> +{
> +	struct led_classdev_mc *mc_cdev = lcdev_to_mccdev(led_cdev);
> +	enum led_brightness brightness = LED_OFF;
> +	int i;
> +
> +	for (i = 0; i < mc_cdev->num_colors; i++) {
> +		mc_cdev->subled_info[i].brightness =
> +			silicom_mec_led_get(mc_cdev->subled_info[i].channel);
> +
> +		/* Mark the overall brightness as LED_ON if any of the subleds are on */
> +		if (mc_cdev->subled_info[i].brightness != LED_OFF)
> +			brightness = LED_ON;
> +	}
> +
> +	return brightness;
> +}
> +
> +
> +static u32 rpm_get(void)
> +{
> +	u32 reg;
> +	u32 bank = 0;
> +	u32 offset = 0xc;
> +	u32 byte_pos = 0;

Pointless variables.

> +
> +	mutex_lock(&mec_io_mutex);
> +	/* Select memory region */
> +	outb(bank, EC_ADDR_MSB);
> +	outb(offset, EC_ADDR_LSB);
> +	/* Get current date from the address */

date or data ?

> +	reg = inw(MEC_DATA(byte_pos));
> +	mutex_unlock(&mec_io_mutex);

I think this should be handled in a function.

	return silicom_read_word(0xc);

with the above implemented in silicom_read_word().
Same for functions reading 8- or 32-bit data.

> +
> +	return reg;
> +}
> +
> +static u32 temp_get(void)
> +{
> +	u32 reg;
> +	u32 bank = 0;
> +	u32 offset = 0xc;
> +	u32 byte_pos = 0;
> +
> +	mutex_lock(&mec_io_mutex);
> +	/* Select memory region */
> +	outb(bank, EC_ADDR_MSB);
> +	outb(offset, EC_ADDR_LSB);
> +	/* Get current date from the address */

data ?

> +	reg = inl(MEC_DATA(byte_pos));
> +	mutex_unlock(&mec_io_mutex);
> +
> +	return (reg >> 16) / 10;

That doesn't look correct. Please confirm that the temperature is indeed reported
in 1/10000th degress C by the chip.

> +}
> +
> +static umode_t silicom_fan_control_fan_is_visible(const u32 attr)
> +{
> +	switch (attr) {
> +	case hwmon_fan_input:
> +	case hwmon_fan_label:
> +		return 0444;
> +	default:
> +		return 0;
> +	}
> +}
> +
> +static umode_t silicom_fan_control_temp_is_visible(const u32 attr)
> +{
> +	switch (attr) {
> +	case hwmon_temp_input:
> +	case hwmon_temp_label:
> +		return 0444;
> +	default:
> +		return 0;
> +	}
> +}
> +
> +static int silicom_fan_control_read_fan(struct device *dev, u32 attr, long *val)
> +{
> +	struct silicom_fan_control_data *ctl = dev_get_drvdata(dev);
> +
> +	switch (attr) {
> +	case hwmon_fan_input:
> +		ctl->fan_speed = rpm_get();
> +		*val = ctl->fan_speed;

		*val = rpm_get();

would do, and storing the value in ctl seems unnecessary / pointless.

> +		return 0;
> +	default:
> +		return -EOPNOTSUPP;
> +	}
> +}
> +
> +static int silicom_fan_control_read_temp(struct device *dev, u32 attr, long *val)
> +{
> +	struct silicom_fan_control_data *ctl = dev_get_drvdata(dev);
> +
> +	switch (attr) {
> +	case hwmon_temp_input:
> +		ctl->temp = temp_get();
> +		*val = ctl->temp;

Why not just
		*val = temp_get();
?

ctl is not really used except to store a value which is never read.
I don't see the point of doing that. Same for fan_speed.

> +		return 0;
> +	default:
> +		return -EOPNOTSUPP;
> +	}
> +}
> +
> +static umode_t silicom_fan_control_is_visible(const void *data,
> +					  enum hwmon_sensor_types type,
> +					  u32 attr, int channel)
> +{
> +	switch (type) {
> +	case hwmon_fan:
> +		return silicom_fan_control_fan_is_visible(attr);
> +	case hwmon_temp:
> +		return silicom_fan_control_temp_is_visible(attr);
> +	default:
> +		return 0;
> +	}
> +}
> +
> +static int silicom_fan_control_read(struct device *dev, enum hwmon_sensor_types type,
> +				    u32 attr, int channel, long *val)
> +{
> +	switch (type) {
> +	case hwmon_fan:
> +		return silicom_fan_control_read_fan(dev, attr, val);
> +	case hwmon_temp:
> +		return silicom_fan_control_read_temp(dev, attr, val);
> +	default:
> +		return -EOPNOTSUPP;
> +	}
> +}
> +
> +static int silicom_fan_control_read_labels(struct device *dev, enum hwmon_sensor_types type,
> +					   u32 attr, int channel, const char **str)
> +{
> +	switch (type) {
> +	case hwmon_fan:
> +		*str = "Fan Speed (RPM)";

RPM is redundant. Fan speed is always measured in RPM.
This would result in output such as

Fan Speed (RPM):                  1166 RPM

which really doesn't make sense. Also, and that is true for both
labels, the expected string is the location of the sensor (e.g.,
"CPU Fan", not something generic like "Fan Speed" or "Thermostat
Sensor".

> +		return 0;
> +	case hwmon_temp:
> +		*str = "Thermostat Sensor";
> +		return 0;
> +	default:
> +		return -EOPNOTSUPP;
> +	}
> +}
> +
> +static int silicom_fan_control_write(struct device *dev, enum hwmon_sensor_types type,
> +				     u32 attr, int channel, long val)
> +{
> +	return 0;
> +}

Unnecessary if there is no writeable attribute (and bad to claim that
there was no error if the function was somehow called).

> +
> +static const struct hwmon_ops silicom_fan_control_hwmon_ops = {
> +	.is_visible = silicom_fan_control_is_visible,
> +	.read = silicom_fan_control_read,
> +	.write = silicom_fan_control_write,
> +	.read_string = silicom_fan_control_read_labels,
> +};
> +
> +static const struct hwmon_chip_info silicom_chip_info = {
> +	.ops = &silicom_fan_control_hwmon_ops,
> +	.info = silicom_fan_control_info,
> +};
> +
> +static int __init silicom_platform_probe(struct platform_device *device)
> +{
> +	int i, err;
> +	u8 magic, ver;
> +	struct silicom_fan_control_data *ctl;
> +	const char *name = "Silocom_Fan_Monitor";
> +	const char *dev_name = "Silicom_platform";
> +
> +	mec_io_base = 0x0800;
> +	mec_io_len = 8;
> +	if (!devm_request_region(&device->dev, mec_io_base, mec_io_len, "mec")) {
> +		dev_err(&device->dev, "couldn't reserve MEC io ports\n");
> +		return -EBUSY;
> +	}
> +
> +	/* Sanity check magic number read for EC */
> +	outb(0x00, MEC_ADDR);
> +	magic = inb(MEC_DATA(0));
> +	ver = inb(MEC_DATA(1));
> +	dev_dbg(&device->dev, "EC magic 0x%02x, version 0x%02x\n", magic, ver);
> +
> +	if (magic != SILICOM_MEC_MAGIC) {
> +		dev_err(&device->dev, "Bad EC magic 0x%02x!\n", magic);
> +		return -ENODEV;
> +	}
> +
> +	if (silicom_led_info) {

I don't understand the conditional. silicom_led_info
is always set in silicom_platform_info_init(). The code makes it
look like it is optional, but each instance of silicom_platform_info
initializes it. That seems quite pointless to me.

> +		err = silicom_mc_leds_register(&device->dev, silicom_led_info);
> +		if (err) {
> +			dev_err(&device->dev, "Failed to register LEDs\n");
> +			return err;
> +		}
> +	}
> +
> +	if (silicom_gpiochip) {
> +		err = devm_gpiochip_add_data(&device->dev, silicom_gpiochip, silicom_gpio_channels);
> +		if (err) {
> +			dev_err(&device->dev, "Failed to register gpiochip: %d\n", err);
> +			return err;
> +		}
> +	}
> +
> +	ctl = devm_kzalloc(&device->dev, sizeof(*ctl), GFP_KERNEL);
> +	if (!ctl)
> +		return -ENOMEM;
> +
> +	ctl->hdev = devm_hwmon_device_register_with_info(&device->dev, name, ctl,
> +				&silicom_chip_info, NULL);
> +
ctl->hdev is not used anywhere and thus pointless.

> +	my_dev_ctl.my_dev = root_device_register(dev_name);
> +	for (i = 0; i < ARRAY_SIZE(my_dev_attr); i++) {
> +		err = sysfs_create_file(&my_dev_ctl.my_dev->kobj, &my_dev_attr[i].attr);
> +		if (err) {
> +			pr_debug("failed to create the foo file in /sys/devices/Silicom_platform\n");
> +			break;
> +		 > +	}
> +
> +	return err;
> +}
> +
> +static int __init silicom_platform_info_init(const struct dmi_system_id *id)
> +{
> +	struct silicom_platform_info *info = id->driver_data;
> +
> +	dev_info(&silicom_platform_dev->dev, "Detected %s\n", id->ident);
> +
> +	mec_io_base = info->io_base;
> +	mec_io_len = info->io_len;
> +	silicom_led_info = info->led_info;
> +	silicom_gpio_channels = info->gpio_channels;
> +	silicom_gpiochip = info->gpiochip;
> +	if (silicom_gpiochip)
> +		silicom_gpiochip->ngpio = info->ngpio;
> +
> +	return 1;
> +}
> +
> +static const struct dmi_system_id silicom_dmi_ids[] __initconst = {
> +	{
> +		.callback = silicom_platform_info_init,
> +		.ident = "Silicom Cordoba (Generic)",
> +		.matches = {
> +			DMI_MATCH(DMI_BOARD_VENDOR, "Silicom"),
> +			DMI_MATCH(DMI_BOARD_NAME, "80300-0214-G"),
> +		},
> +		.driver_data = &silicom_generic_cordoba_info,
> +	},
> +	{
> +		.callback = silicom_platform_info_init,
> +		.ident = "Silicom Cordoba (Generic)",
> +		.matches = {
> +			DMI_MATCH(DMI_BOARD_VENDOR, "Silicom"),
> +			DMI_MATCH(DMI_BOARD_NAME, "80500-0214-G"),
> +		},
> +		.driver_data = &silicom_generic_cordoba_info,
> +	},
> +	{
> +		 .callback = silicom_platform_info_init,
> +		 .ident = "Silicom Cordoba (plat_0222)",
> +		 .matches = {
> +		       DMI_MATCH(DMI_BOARD_VENDOR, "Silicom"),
> +		       DMI_MATCH(DMI_BOARD_NAME, "80300-0222-G"),
> +		 },
> +		.driver_data = &silicom_plat_0222_cordoba_info,
> +	},
> +	{ },
> +};
> +
> +static int __init silicom_platform_init(void)
> +{
> +	struct device *dev;
> +	int err;
> +
> +	/* register a platform device to act as the parent for LEDS, etc. */
> +	silicom_platform_dev = platform_device_register_simple("silicom-platform", -1, NULL, 0);
> +	if (IS_ERR(silicom_platform_dev)) {
> +		err = PTR_ERR(silicom_platform_dev);
> +		pr_err("failed to register silicom-platform device: %d\n", err);
> +		goto silicom_init_register_err;
> +	}
> +	dev = &silicom_platform_dev->dev;
> +
> +	err = dmi_check_system(silicom_dmi_ids);
> +	if (err == 0) {
> +		dev_err(dev, "No DMI match for this platform\n");
> +		err = -ENODEV;
> +		goto silicom_init_probe_err;
> +	}
> +
> +	/* Directly probe the platform driver in init since this isn't a
> +	 * hotpluggable device.  That means we don't need to register a driver
> +	 * that needs to wait around in memory on the chance a matching device
> +	 * would get added.  Instead run once in __init so that we can free all
> +	 * those resources when the __init region is wiped
> +	 */
> +	err = platform_driver_probe(&silicom_platform_driver, silicom_platform_probe);
> +	if (err) {
> +		dev_err(dev, "Failed to probe platform driver %d\n", err);
> +		goto silicom_init_probe_err;
> +	}
> +
> +	return 0;
> +
> +silicom_init_probe_err:
> +	if (silicom_platform_dev) {
> +		platform_device_unregister(silicom_platform_dev);
> +		silicom_platform_dev = NULL;
> +	}
> +	if (my_dev_ctl.my_dev) {
> +		root_device_unregister(my_dev_ctl.my_dev);
> +		my_dev_ctl.my_dev = NULL;
> +	}
> +
> +silicom_init_register_err:
> +	return err;
> +}
> +
> +static void __exit silicom_platform_exit(void)
> +{
> +	int i;
> +
> +	if (silicom_platform_dev) {
> +		platform_device_unregister(silicom_platform_dev);
> +		platform_driver_unregister(&silicom_platform_driver);
> +	}
> +
> +	if (my_dev_ctl.my_dev) {
> +		for (i = 0; i < ARRAY_SIZE(my_dev_attr); i++)
> +			sysfs_remove_file(&my_dev_ctl.my_dev->kobj, &my_dev_attr[i].attr);
> +		root_device_unregister(my_dev_ctl.my_dev);
> +	}
> +	mutex_destroy(&mec_io_mutex);
> +}
> +
> +module_init(silicom_platform_init);
> +module_exit(silicom_platform_exit);
> +
> +MODULE_LICENSE("GPL");
> +MODULE_AUTHOR("Henry Shi <henrys@silicom-usa.com>");
> +MODULE_DESCRIPTION("Platform driver for Silicom network appliances");
> +
> +MODULE_DEVICE_TABLE(dmi, silicom_dmi_ids);
> +
Ilpo Järvinen July 19, 2023, 12:13 p.m. UTC | #2
On Tue, 18 Jul 2023, Henry Shi wrote:

> The Silicom platform (silicom-platform) Linux driver for Swisscom
> Business Box (Swisscom BB) as well as Cordoba family products is a 
> software solution designed to facilitate the efficient management
> and control of devices through the integration of various Linux
> frameworks. This platform driver provides seamless support for
> device management via the Linux LED framework, GPIO framework,
> Hardware Monitoring (HWMON), and device attributes. The Silicom
> platform driver's compatibility with these Linux frameworks allows
> applications to access and control Cordoba family devices using
> existing software that is compatible with these frameworks. This
> compatibility simplifies the development process, reduces
> dependencies on proprietary solutions, and promotes
> interoperability with other Linux-based systems and software.
> 
> Signed-off-by: Henry Shi <henryshi2018@gmail.com>
> ---
>  drivers/platform/x86/Kconfig            |   12 +
>  drivers/platform/x86/Makefile           |    1 +
>  drivers/platform/x86/silicom-platform.c | 1123 +++++++++++++++++++++++
>  3 files changed, 1136 insertions(+)
>  create mode 100644 drivers/platform/x86/silicom-platform.c
> 
> diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
> index 22052031c719..8c0988c2b4ce 100644
> --- a/drivers/platform/x86/Kconfig
> +++ b/drivers/platform/x86/Kconfig
> @@ -188,6 +188,18 @@ config ACER_WMI
>  	  If you have an ACPI-WMI compatible Acer/ Wistron laptop, say Y or M
>  	  here.
>  
> +

Extra newline

> +config SILICOM_PLATFORM
> +	tristate "Silicom Edge Networking device support"
> +	depends on DMI
> +	select LEDS_CLASS_MULTICOLOR
> +	select GPIOLIB
> +	help
> +	  This option enables support for the LEDs/GPIO/etc downstream of the
> +	  embedded controller on Silicom "Cordoba" hardware and derivatives.
> +
> +	  If you have a Silicom network appliance, say Y or M here.
> +
>  source "drivers/platform/x86/amd/Kconfig"
>  
>  config ADV_SWBUTTON
> diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
> index 2cafe51ec4d8..f2f5743a9e54 100644
> --- a/drivers/platform/x86/Makefile
> +++ b/drivers/platform/x86/Makefile
> @@ -113,6 +113,7 @@ obj-$(CONFIG_SERIAL_MULTI_INSTANTIATE)	+= serial-multi-instantiate.o
>  obj-$(CONFIG_MLX_PLATFORM)		+= mlx-platform.o
>  obj-$(CONFIG_TOUCHSCREEN_DMI)		+= touchscreen_dmi.o
>  obj-$(CONFIG_WIRELESS_HOTKEY)		+= wireless-hotkey.o
> +obj-$(CONFIG_SILICOM_PLATFORM)          += silicom-platform.o

Use tabs like the other lines.

>  obj-$(CONFIG_X86_ANDROID_TABLETS)	+= x86-android-tablets/
>  
>  # Intel uncore drivers
> diff --git a/drivers/platform/x86/silicom-platform.c b/drivers/platform/x86/silicom-platform.c
> new file mode 100644
> index 000000000000..90431f733682
> --- /dev/null
> +++ b/drivers/platform/x86/silicom-platform.c
> @@ -0,0 +1,1123 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +//
> +// silicom-platform.c - Silicom MEC170x platform driver
> +//
> +// Copyright (C) 2023 Henry Shi <henrys@silicom-usa.com>
> +
> +#include <linux/dmi.h>
> +#include <linux/gpio/driver.h>
> +#include <linux/init.h>
> +#include <linux/ioport.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/led-class-multicolor.h>
> +#include <linux/module.h>
> +#include <linux/hwmon.h>
> +#include <linux/mutex.h>
> +#include <linux/platform_device.h>
> +#include <linux/string.h>
> +#include <linux/thermal.h>
> +#include <linux/kobject.h>
> +#include <linux/sysfs.h>
> +
> +#define MEC_ADDR ((mec_io_base) + 0x02)
> +#define MEC_DATA(byte) ((mec_io_base) + 0x04 + (byte))
> +#define EC_ADDR_LSB MEC_ADDR
> +#define EC_ADDR_MSB ((mec_io_base) + 0x03)
> +#define SILICOM_MEC_MAGIC 0x5a

> +#define OFFSET_BIT_TO_CHANNEL(off, bit) ((((off) + 0x014) << 3) | (bit))
> +#define CHANNEL_TO_OFFSET(chan) (((chan) >> 3) - 0x14)

So you have two fields, offset and "bit", whatever that is. It would seem
named define with GENMASK() for these two fields and FIELD_PREP() is 
appropriate here. And FIELD_GET() (and perhaps also FIELD_PREP()) used in 
the code below where appropriate.

0x14 should be named with a define.

> +#define CHANNEL_TO_BIT(chan) ((chan) & 0x07)

Unused.

> +
> +static DEFINE_MUTEX(mec_io_mutex);
> +static int mec_io_base, mec_io_len;
> +
> +struct silicom_fan_control_data {
> +	struct   device *hdev;
> +	int      temp;
> +	int      fan_speed;
> +};
> +
> +static const struct hwmon_channel_info *silicom_fan_control_info[] = {
> +	HWMON_CHANNEL_INFO(fan, HWMON_F_INPUT | HWMON_F_LABEL),
> +	HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT | HWMON_T_LABEL),
> +	NULL
> +};
> +
> +struct silicom_device_control_data {
> +	struct   device *my_dev;
> +	int      efuse_status;
> +	int      uc_version;
> +	int      power_cycle;
> +};
> +static struct silicom_device_control_data my_dev_ctl;
> +
> +struct silicom_platform_info {
> +	int io_base;
> +	int io_len;
> +	struct led_classdev_mc *led_info;
> +	struct gpio_chip *gpiochip;
> +	u8 *gpio_channels;
> +	u16 ngpio;
> +};
> +
> +static const char * const plat_0222_gpio_names[] = {
> +	"AUTOM0_SFP_TX_FAULT",
> +	"SLOT2_LED_OUT",
> +	"SIM_M2_SLOT2_B_DET",
> +	"SIM_M2_SLOT2_A_DET",
> +	"SLOT1_LED_OUT",
> +	"SIM_M2_SLOT1_B_DET",
> +	"SIM_M2_SLOT1_A_DET",
> +	"SLOT0_LED_OUT",
> +	"WAN_SFP0_RX_LOS",
> +	"WAN_SFP0_PRSNT_N",
> +	"WAN_SFP0_TX_FAULT",
> +	"AUTOM1_SFP_RX_LOS",
> +	"AUTOM1_SFP_PRSNT_N",
> +	"AUTOM1_SFP_TX_FAULT",
> +	"AUTOM0_SFP_RX_LOS",
> +	"AUTOM0_SFP_PRSNT_N",
> +	"WAN_SFP1_RX_LOS",
> +	"WAN_SFP1_PRSNT_N",
> +	"WAN_SFP1_TX_FAULT",
> +	"SIM_M2_SLOT1_MUX_SEL",
> +	"W_DISABLE_M2_SLOT1_N",
> +	"W_DISABLE_MPCIE_SLOT0_N",
> +	"W_DISABLE_M2_SLOT0_N",
> +	"BT_COMMAND_MODE",
> +	"WAN_SFP1_TX_DISABLE",
> +	"WAN_SFP0_TX_DISABLE",
> +	"AUTOM1_SFP_TX_DISABLE",
> +	"AUTOM0_SFP_TX_DISABLE",
> +	"SIM_M2_SLOT2_MUX_SEL",
> +	"W_DISABLE_M2_SLOT2_N",
> +	"RST_CTL_M2_SLOT_1_N",
> +	"RST_CTL_M2_SLOT_2_N",
> +	"PM_USB_PWR_EN_BOT",
> +	"PM_USB_PWR_EN_TOP",
> +};
> +
> +static u8 plat_0222_gpio_channels[] = {
> +	OFFSET_BIT_TO_CHANNEL(0x00, 0),
> +	OFFSET_BIT_TO_CHANNEL(0x00, 1),
> +	OFFSET_BIT_TO_CHANNEL(0x00, 2),
> +	OFFSET_BIT_TO_CHANNEL(0x00, 3),
> +	OFFSET_BIT_TO_CHANNEL(0x00, 4),
> +	OFFSET_BIT_TO_CHANNEL(0x00, 5),
> +	OFFSET_BIT_TO_CHANNEL(0x00, 6),
> +	OFFSET_BIT_TO_CHANNEL(0x00, 7),
> +	OFFSET_BIT_TO_CHANNEL(0x01, 0),
> +	OFFSET_BIT_TO_CHANNEL(0x01, 1),
> +	OFFSET_BIT_TO_CHANNEL(0x01, 2),
> +	OFFSET_BIT_TO_CHANNEL(0x01, 3),
> +	OFFSET_BIT_TO_CHANNEL(0x01, 4),
> +	OFFSET_BIT_TO_CHANNEL(0x01, 5),
> +	OFFSET_BIT_TO_CHANNEL(0x01, 6),
> +	OFFSET_BIT_TO_CHANNEL(0x01, 7),
> +	OFFSET_BIT_TO_CHANNEL(0x02, 0),
> +	OFFSET_BIT_TO_CHANNEL(0x02, 1),
> +	OFFSET_BIT_TO_CHANNEL(0x02, 2),
> +	OFFSET_BIT_TO_CHANNEL(0x09, 0),
> +	OFFSET_BIT_TO_CHANNEL(0x09, 1),
> +	OFFSET_BIT_TO_CHANNEL(0x09, 2),
> +	OFFSET_BIT_TO_CHANNEL(0x09, 3),
> +	OFFSET_BIT_TO_CHANNEL(0x0a, 0),
> +	OFFSET_BIT_TO_CHANNEL(0x0a, 1),
> +	OFFSET_BIT_TO_CHANNEL(0x0a, 2),
> +	OFFSET_BIT_TO_CHANNEL(0x0a, 3),
> +	OFFSET_BIT_TO_CHANNEL(0x0a, 4),
> +	OFFSET_BIT_TO_CHANNEL(0x0a, 5),
> +	OFFSET_BIT_TO_CHANNEL(0x0a, 6),
> +	OFFSET_BIT_TO_CHANNEL(0x0b, 0),
> +	OFFSET_BIT_TO_CHANNEL(0x0b, 1),
> +	OFFSET_BIT_TO_CHANNEL(0x0b, 2),
> +	OFFSET_BIT_TO_CHANNEL(0x0b, 3),
> +};
> +
> +static int silicom_gpio_get_direction(struct gpio_chip *gc, unsigned int offset);
> +static int silicom_gpio_direction_input(struct gpio_chip *gc, unsigned int offset);
> +static int silicom_gpio_direction_output(struct gpio_chip *gc, unsigned int offset, int value);
> +static int silicom_gpio_get(struct gpio_chip *gc, unsigned int offset);
> +static void silicom_gpio_set(struct gpio_chip *gc, unsigned int offset, int value);
> +static void silicom_mec_led_mc_brightness_set(struct led_classdev *led_cdev,
> +					      enum led_brightness brightness);
> +static enum led_brightness silicom_mec_led_mc_brightness_get(struct led_classdev *led_cdev);

Try to organize the code such that no forward declarations are necessary.

> +static struct platform_device *silicom_platform_dev;
> +static struct led_classdev_mc *silicom_led_info __initdata;
> +static struct gpio_chip *silicom_gpiochip __initdata;
> +static u8 *silicom_gpio_channels __initdata;
> +static struct gpio_chip silicom_gpio_chip = {
> +	.label = "silicom-gpio",
> +	.get_direction = silicom_gpio_get_direction,
> +	.direction_input = silicom_gpio_direction_input,
> +	.direction_output = silicom_gpio_direction_output,
> +	.get = silicom_gpio_get,
> +	.set = silicom_gpio_set,
> +	.base = -1,
> +	.ngpio = ARRAY_SIZE(plat_0222_gpio_channels),
> +	.names = plat_0222_gpio_names,
> +	/* We're using a mutex to protect the indirect access, so we can sleep if the lock blocks */
> +	.can_sleep = true,
> +};
> +
> +static struct mc_subled plat_0222_wan_mc_subled_info[] __initdata = {
> +	{
> +		.color_index = LED_COLOR_ID_WHITE,
> +		.brightness = 1,
> +		.intensity = 0,
> +		.channel = OFFSET_BIT_TO_CHANNEL(0x0c, 7),
> +	},
> +	{
> +		.color_index = LED_COLOR_ID_YELLOW,
> +		.brightness = 1,
> +		.intensity = 0,
> +		.channel = OFFSET_BIT_TO_CHANNEL(0x0c, 6),
> +	},
> +	{
> +		.color_index = LED_COLOR_ID_RED,
> +		.brightness = 1,
> +		.intensity = 0,
> +		.channel = OFFSET_BIT_TO_CHANNEL(0x0c, 5),
> +	},
> +};
> +
> +static struct mc_subled plat_0222_sys_mc_subled_info[] __initdata = {
> +	{
> +		.color_index = LED_COLOR_ID_WHITE,
> +		.brightness = 1,
> +		.intensity = 0,
> +		.channel = OFFSET_BIT_TO_CHANNEL(0x0c, 4),
> +	},
> +	{
> +		.color_index = LED_COLOR_ID_AMBER,
> +		.brightness = 1,
> +		.intensity = 0,
> +		.channel = OFFSET_BIT_TO_CHANNEL(0x0c, 3),
> +	},
> +	{
> +		.color_index = LED_COLOR_ID_RED,
> +		.brightness = 1,
> +		.intensity = 0,
> +		.channel = OFFSET_BIT_TO_CHANNEL(0x0c, 2),
> +	},
> +};
> +
> +static struct mc_subled plat_0222_stat1_mc_subled_info[] __initdata = {
> +	{
> +		.color_index = LED_COLOR_ID_RED,
> +		.brightness = 1,
> +		.intensity = 0,
> +		.channel = OFFSET_BIT_TO_CHANNEL(0x0c, 1),
> +	},
> +	{
> +		.color_index = LED_COLOR_ID_GREEN,
> +		.brightness = 1,
> +		.intensity = 0,
> +		.channel = OFFSET_BIT_TO_CHANNEL(0x0c, 0),
> +	},
> +	{
> +		.color_index = LED_COLOR_ID_BLUE,
> +		.brightness = 1,
> +		.intensity = 0,
> +		.channel = OFFSET_BIT_TO_CHANNEL(0x0d, 7),
> +	},
> +	{
> +		.color_index = LED_COLOR_ID_YELLOW,
> +		.brightness = 1,
> +		.intensity = 0,
> +		.channel = OFFSET_BIT_TO_CHANNEL(0x0d, 6),
> +	},
> +};
> +
> +static struct mc_subled plat_0222_stat2_mc_subled_info[] __initdata = {
> +	{
> +		.color_index = LED_COLOR_ID_RED,
> +		.brightness = 1,
> +		.intensity = 0,
> +		.channel = OFFSET_BIT_TO_CHANNEL(0x0d, 5),
> +	},
> +	{
> +		.color_index = LED_COLOR_ID_GREEN,
> +		.brightness = 1,
> +		.intensity = 0,
> +		.channel = OFFSET_BIT_TO_CHANNEL(0x0d, 4),
> +	},
> +	{
> +		.color_index = LED_COLOR_ID_BLUE,
> +		.brightness = 1,
> +		.intensity = 0,
> +		.channel = OFFSET_BIT_TO_CHANNEL(0x0d, 3),
> +	},
> +	{
> +		.color_index = LED_COLOR_ID_YELLOW,
> +		.brightness = 1,
> +		.intensity = 0,
> +		.channel = OFFSET_BIT_TO_CHANNEL(0x0d, 2),
> +	},
> +};
> +
> +static struct mc_subled plat_0222_stat3_mc_subled_info[] __initdata = {
> +	{
> +		.color_index = LED_COLOR_ID_RED,
> +		.brightness = 1,
> +		.intensity = 0,
> +		.channel = OFFSET_BIT_TO_CHANNEL(0x0d, 1),
> +	},
> +	{
> +		.color_index = LED_COLOR_ID_GREEN,
> +		.brightness = 1,
> +		.intensity = 0,
> +		.channel = OFFSET_BIT_TO_CHANNEL(0x0d, 0),
> +	},
> +	{
> +		.color_index = LED_COLOR_ID_BLUE,
> +		.brightness = 1,
> +		.intensity = 0,
> +		.channel = OFFSET_BIT_TO_CHANNEL(0x0e, 1),
> +	},
> +	{
> +		.color_index = LED_COLOR_ID_YELLOW,
> +		.brightness = 1,
> +		.intensity = 0,
> +		.channel = OFFSET_BIT_TO_CHANNEL(0x0e, 0),
> +	},
> +};
> +
> +static struct led_classdev_mc plat_0222_mc_led_info[] __initdata = {
> +	{
> +		.led_cdev = {
> +			.name = "multicolor:wan",
> +			.brightness = 0,
> +			.max_brightness = 1,
> +			.brightness_set = silicom_mec_led_mc_brightness_set,
> +			.brightness_get = silicom_mec_led_mc_brightness_get,
> +		},
> +		.num_colors = ARRAY_SIZE(plat_0222_wan_mc_subled_info),
> +		.subled_info = plat_0222_wan_mc_subled_info,
> +	},
> +	{
> +		.led_cdev = {
> +			.name = "multicolor:sys",
> +			.brightness = 0,
> +			.max_brightness = 1,
> +			.brightness_set = silicom_mec_led_mc_brightness_set,
> +			.brightness_get = silicom_mec_led_mc_brightness_get,
> +		},
> +		.num_colors = ARRAY_SIZE(plat_0222_sys_mc_subled_info),
> +		.subled_info = plat_0222_sys_mc_subled_info,
> +	},
> +	{
> +		.led_cdev = {
> +			.name = "multicolor:stat1",
> +			.brightness = 0,
> +			.max_brightness = 1,
> +			.brightness_set = silicom_mec_led_mc_brightness_set,
> +			.brightness_get = silicom_mec_led_mc_brightness_get,
> +		},
> +		.num_colors = ARRAY_SIZE(plat_0222_stat1_mc_subled_info),
> +		.subled_info = plat_0222_stat1_mc_subled_info,
> +	},
> +	{
> +		.led_cdev = {
> +			.name = "multicolor:stat2",
> +			.brightness = 0,
> +			.max_brightness = 1,
> +			.brightness_set = silicom_mec_led_mc_brightness_set,
> +			.brightness_get = silicom_mec_led_mc_brightness_get,
> +		},
> +		.num_colors = ARRAY_SIZE(plat_0222_stat2_mc_subled_info),
> +		.subled_info = plat_0222_stat2_mc_subled_info,
> +	},
> +	{
> +		.led_cdev = {
> +			.name = "multicolor:stat3",
> +			.brightness = 0,
> +			.max_brightness = 1,
> +			.brightness_set = silicom_mec_led_mc_brightness_set,
> +			.brightness_get = silicom_mec_led_mc_brightness_get,
> +		},
> +		.num_colors = ARRAY_SIZE(plat_0222_stat3_mc_subled_info),
> +		.subled_info = plat_0222_stat3_mc_subled_info,
> +	},
> +	{ },
> +};
> +
> +static struct silicom_platform_info silicom_plat_0222_cordoba_info __initdata = {
> +	.io_base = 0x800,
> +	.io_len = 8,
> +	.led_info = plat_0222_mc_led_info,
> +	.gpiochip = &silicom_gpio_chip,
> +	.gpio_channels = plat_0222_gpio_channels,
> +	/* The original generic cordoba does not have the last 4 outputs of the plat_0222 BB variant,
> +	 * the rest are the same, so use the same longer list, but ignore the last entries here
> +	 */
> +	.ngpio = ARRAY_SIZE(plat_0222_gpio_channels),
> +
> +};
> +
> +static struct mc_subled cordoba_fp_left_mc_subled_info[] __initdata = {
> +	{
> +		.color_index = LED_COLOR_ID_RED,
> +		.brightness = 1,
> +		.intensity = 0,
> +		.channel = OFFSET_BIT_TO_CHANNEL(0x08, 6),
> +	},
> +	{
> +		.color_index = LED_COLOR_ID_GREEN,
> +		.brightness = 1,
> +		.intensity = 0,
> +		.channel = OFFSET_BIT_TO_CHANNEL(0x08, 5),
> +	},
> +	{
> +		.color_index = LED_COLOR_ID_BLUE,
> +		.brightness = 1,
> +		.intensity = 0,
> +		.channel = OFFSET_BIT_TO_CHANNEL(0x09, 7),
> +	},
> +	{
> +		.color_index = LED_COLOR_ID_AMBER,
> +		.brightness = 1,
> +		.intensity = 0,
> +		.channel = OFFSET_BIT_TO_CHANNEL(0x09, 4),
> +	},
> +};
> +
> +static struct mc_subled cordoba_fp_center_mc_subled_info[] __initdata = {
> +	{
> +		.color_index = LED_COLOR_ID_RED,
> +		.brightness = 1,
> +		.intensity = 0,
> +		.channel = OFFSET_BIT_TO_CHANNEL(0x08, 7),
> +	},
> +	{
> +		.color_index = LED_COLOR_ID_GREEN,
> +		.brightness = 1,
> +		.intensity = 0,
> +		.channel = OFFSET_BIT_TO_CHANNEL(0x08, 4),
> +	},
> +	{
> +		.color_index = LED_COLOR_ID_BLUE,
> +		.brightness = 1,
> +		.intensity = 0,
> +		.channel = OFFSET_BIT_TO_CHANNEL(0x08, 3),
> +	},
> +	{
> +		.color_index = LED_COLOR_ID_AMBER,
> +		.brightness = 1,
> +		.intensity = 0,
> +		.channel = OFFSET_BIT_TO_CHANNEL(0x09, 6),
> +	},
> +};
> +
> +static struct mc_subled cordoba_fp_right_mc_subled_info[] __initdata = {
> +	{
> +		.color_index = LED_COLOR_ID_RED,
> +		.brightness = 1,
> +		.intensity = 0,
> +		.channel = OFFSET_BIT_TO_CHANNEL(0x08, 2),
> +	},
> +	{
> +		.color_index = LED_COLOR_ID_GREEN,
> +		.brightness = 1,
> +		.intensity = 0,
> +		.channel = OFFSET_BIT_TO_CHANNEL(0x08, 1),
> +	},
> +	{
> +		.color_index = LED_COLOR_ID_BLUE,
> +		.brightness = 1,
> +		.intensity = 0,
> +		.channel = OFFSET_BIT_TO_CHANNEL(0x08, 0),
> +	},
> +	{
> +		.color_index = LED_COLOR_ID_AMBER,
> +		.brightness = 1,
> +		.intensity = 0,
> +		.channel = OFFSET_BIT_TO_CHANNEL(0x09, 5),
> +	},
> +};
> +
> +static struct led_classdev_mc cordoba_mc_led_info[] __initdata = {
> +	{
> +		.led_cdev = {
> +			.name = "multicolor:fp_left",
> +			.brightness = 0,
> +			.max_brightness = 1,
> +			.brightness_set = silicom_mec_led_mc_brightness_set,
> +			.brightness_get = silicom_mec_led_mc_brightness_get,
> +		},
> +		.num_colors = ARRAY_SIZE(cordoba_fp_left_mc_subled_info),
> +		.subled_info = cordoba_fp_left_mc_subled_info,
> +	},
> +	{
> +		.led_cdev = {
> +			.name = "multicolor:fp_center",
> +			.brightness = 0,
> +			.max_brightness = 1,
> +			.brightness_set = silicom_mec_led_mc_brightness_set,
> +			.brightness_get = silicom_mec_led_mc_brightness_get,
> +		},
> +		.num_colors = ARRAY_SIZE(cordoba_fp_center_mc_subled_info),
> +		.subled_info = cordoba_fp_center_mc_subled_info,
> +	},
> +	{
> +		.led_cdev = {
> +			.name = "multicolor:fp_right",
> +			.brightness = 0,
> +			.max_brightness = 1,
> +			.brightness_set = silicom_mec_led_mc_brightness_set,
> +			.brightness_get = silicom_mec_led_mc_brightness_get,
> +		},
> +		.num_colors = ARRAY_SIZE(cordoba_fp_right_mc_subled_info),
> +		.subled_info = cordoba_fp_right_mc_subled_info,
> +	},
> +	{ },
> +};
> +
> +static struct silicom_platform_info silicom_generic_cordoba_info __initdata = {
> +	.io_base = 0x800,
> +	.io_len = 8,
> +	.led_info = cordoba_mc_led_info,
> +	.gpiochip = &silicom_gpio_chip,
> +	.gpio_channels = plat_0222_gpio_channels,
> +	.ngpio = ARRAY_SIZE(plat_0222_gpio_channels),
> +};
> +
> +static struct platform_driver silicom_platform_driver = {
> +	.driver = {
> +		.name = "silicom-platform",
> +	},
> +};
> +
> +void lock_io_modules(void)
> +{
> +	mutex_lock(&mec_io_mutex);
> +}
> +EXPORT_SYMBOL(lock_io_modules);
> +
> +void unlock_io_modules(void)
> +{
> +	mutex_unlock(&mec_io_mutex);
> +}
> +EXPORT_SYMBOL(unlock_io_modules);
> +
> +static ssize_t efuse_status_show(struct device *dev, struct device_attribute *attr,
> +		      char *buf)
> +{
> +	u32 reg;
> +	u32 bank = 0;
> +	u32 offset = 0x28;

Why is this not a named define?

No need for bank & offset variables.

> +	u32 byte_pos = 0;
> +
> +	mutex_lock(&mec_io_mutex);
> +	/* Select memory region */
> +	outb(bank, EC_ADDR_MSB);
> +	outb(offset, EC_ADDR_LSB);
> +
> +	/* Get current date from the address */
> +	reg = inl(MEC_DATA(byte_pos));
> +	mutex_unlock(&mec_io_mutex);
> +
> +	my_dev_ctl.efuse_status = reg & 0x1;
> +
> +	return sprintf(buf, "%d\n", my_dev_ctl.efuse_status);
> +}
> +
> +static ssize_t uc_version_show(struct device *dev,
> +			       struct device_attribute *attr,
> +			       char *buf)
> +{
> +	u32 reg;
> +	u32 bank = 0;
> +	u32 offset = 0x0;

Ditto.

> +	u32 byte_pos = 0;
> +	int uc_version;
> +
> +	mutex_lock(&mec_io_mutex);
> +	outb(bank, EC_ADDR_MSB);
> +	outb(offset, EC_ADDR_LSB);
> +
> +	reg = inl(MEC_DATA(byte_pos));
> +	mutex_unlock(&mec_io_mutex);
> +
> +	uc_version = (reg >> 8) & 0xFF;

Define a named mask with GENMASK() and use FIELD_GET().

> +	if (uc_version >= 64 && uc_version < 128) {
> +		uc_version = uc_version - 64;

Testing for a bit (or two bit field inside the version actually 
considering the other if too) in version and then handcrafting & ~THATBIT?

> +		if (uc_version < 10)
> +			uc_version = 100 + uc_version;
> +		else
> +			uc_version = 100 + 10 * (uc_version / 10) + uc_version % 10;

Why is this if necessary? Doesn't the latter yield the same value as the 
first one when uc_version < 10?

> +	} else if (uc_version >= 128 && uc_version < 192) {
> +		uc_version = uc_version - 128;
> +		if (uc_version < 10)
> +			uc_version = 200 + uc_version;
> +		else
> +			uc_version = 200 + 10 * (uc_version / 10) + uc_version % 10;

Similar comments to this block.

> +	}
> +	my_dev_ctl.uc_version = uc_version;
> +	return sprintf(buf, "%d\n", my_dev_ctl.uc_version);
> +}
> +
> +static ssize_t power_cycle_show(struct device *dev,
> +				struct device_attribute *attr,
> +				char *buf)
> +{
> +	return sprintf(buf, "%d\n", my_dev_ctl.power_cycle);
> +}
> +
> +static void powercycle_uc(void)
> +{
> +	u32 bank = 0;
> +	u32 offset = 0x24;

Named define, no need for these variables.

> +	u32 byte_pos = 0;
> +
> +	mutex_lock(&mec_io_mutex);
> +	/* Select memory region */
> +	outb(bank, EC_ADDR_MSB);
> +	outb(offset, EC_ADDR_LSB);
> +
> +	/* Set to 1 for current date from the address */
> +	outb(1, MEC_DATA(byte_pos));

Hmm, this is really misleading. MEC_DATA() seems to calculate _an offset_, 
not data? Name things accordingly.

> +	mutex_unlock(&mec_io_mutex);
> +}
> +
> +static ssize_t power_cycle_store(struct device *dev, struct device_attribute *attr,
> +				 const char *buf, size_t count)
> +{
> +	if (sscanf(buf, "%du", &my_dev_ctl.power_cycle) != 1) {
> +		dev_err(dev, "Failed to read power_cycle\n");
> +		return -EINVAL;
> +	}
> +	if (my_dev_ctl.power_cycle > 0)
> +		powercycle_uc();
> +
> +	return count;
> +}
> +
> +static struct device_attribute my_dev_attr[] = {
> +	{
> +		.attr = {.name = "efuse_status", .mode = 0644},
> +		.show = efuse_status_show,
> +		.store = NULL
> +	},
> +	{
> +		.attr = {.name = "uc_version", .mode = 0644},
> +		.show = uc_version_show,
> +		.store = NULL
> +	},
> +	{
> +		.attr = {.name = "power_cycle", .mode = 0644},
> +		.show = power_cycle_show,
> +		.store = power_cycle_store
> +	},
> +};
> +
> +static int silicom_gpio_get_direction(struct gpio_chip *gc, unsigned int offset)
> +{
> +	u8 *channels = gpiochip_get_data(gc);
> +
> +	/* Input registers have offsets between [0x00, 0x07] */
> +	if (CHANNEL_TO_OFFSET(channels[offset]) < 0x08)
> +		return GPIO_LINE_DIRECTION_IN;
> +
> +	return GPIO_LINE_DIRECTION_OUT;
> +}
> +
> +static int silicom_gpio_direction_input(struct gpio_chip *gc, unsigned int offset)
> +{
> +	int direction = silicom_gpio_get_direction(gc, offset);
> +
> +	return direction == GPIO_LINE_DIRECTION_IN ? 0 : -EINVAL;
> +}
> +
> +static void silicom_gpio_set(struct gpio_chip *gc, unsigned int offset, int value)
> +{
> +	u8 *channels = gpiochip_get_data(gc);
> +	int direction = silicom_gpio_get_direction(gc, offset);
> +	int channel = channels[offset];
> +	u8 reg;
> +
> +	if (direction == GPIO_LINE_DIRECTION_IN)
> +		return;
> +
> +	mutex_lock(&mec_io_mutex);
> +	/* Get the dword offset from the channel */
> +	outb((channel >> 3) & 0xfc, MEC_ADDR);
> +
> +	/* Get the current register */
> +	reg = inb(MEC_DATA((channel >> 3) & 0x03));
> +	if (value == 0)
> +		reg &= ~(1 << (channel & 0x7));
> +	else if (value > 0)
> +		reg |= 1 << (channel & 0x7);
> +	else
> +		pr_err("Invalid GPIO value: %d\n", value);
> +	outb(reg, MEC_DATA((channel >> 3) & 0x03));
> +	mutex_unlock(&mec_io_mutex);
> +}
> +
> +static int silicom_gpio_direction_output(struct gpio_chip *gc, unsigned int offset, int value)
> +{
> +	int direction = silicom_gpio_get_direction(gc, offset);
> +
> +	if (direction == GPIO_LINE_DIRECTION_IN)
> +		return -EINVAL;
> +
> +	silicom_gpio_set(gc, offset, value);
> +
> +	return 0;
> +}
> +
> +static int silicom_gpio_get(struct gpio_chip *gc, unsigned int offset)
> +{
> +	u8 *channels = gpiochip_get_data(gc);
> +	int channel = channels[offset];
> +	u8 reg;
> +
> +	mutex_lock(&mec_io_mutex);
> +	/* Get the dword offset from the channel */
> +	outb((channel >> 3) & 0xfc, MEC_ADDR);
> +
> +	/* Get the current register */
> +	reg = inb(MEC_DATA((channel >> 3) & 0x03));
> +	mutex_unlock(&mec_io_mutex);
> +
> +	return (reg >> (channel & 0x7)) & 0x01;
> +}
> +
> +static int __init silicom_mc_leds_register(struct device *dev,
> +					   const struct led_classdev_mc *mc_leds)
> +{
> +	struct led_classdev_mc *led;
> +	int i, err;
> +
> +	for (i = 0; mc_leds[i].led_cdev.name; i++) {
> +		/* allocate and copy data from the init constansts */

There's a typo in the constansts but the code seems obvious enough to not 
need a comment at all.

> +		led = devm_kzalloc(dev, sizeof(struct led_classdev_mc), GFP_KERNEL);
> +		if (IS_ERR_OR_NULL(led)) {
> +			dev_err(dev, "Failed to alloc led_classdev_mc[%d]: %ld\n", i, PTR_ERR(led));
> +			return -ENOMEM;
> +		}
> +		memcpy(led, &mc_leds[i], sizeof(*led));
> +
> +		led->subled_info = devm_kzalloc(dev, led->num_colors * sizeof(struct mc_subled),

array_size() from linux/overflow.h

> +						GFP_KERNEL);
> +		if (IS_ERR_OR_NULL(led->subled_info)) {
> +			dev_err(dev, "Failed to alloc subled_info[%d]: %ld\n",
> +				i, PTR_ERR(led->subled_info));
> +			return -ENOMEM;
> +		}
> +		memcpy(led->subled_info, mc_leds[i].subled_info,
> +			led->num_colors * sizeof(struct mc_subled));

array_size()

Although a local variable could be used to hold it as it's used for alloc 
and this line.

> +
> +		err = devm_led_classdev_multicolor_register(dev, led);
> +		if (err) {
> +			dev_err(dev, "Failed to register[%d]: %d\n", i, err);
> +			return err;
> +		}
> +	}
> +
> +	return 0;
> +}
> +
> +static void silicom_mec_led_set(int channel, int on)
> +{
> +	u8 reg;
> +
> +	mutex_lock(&mec_io_mutex);
> +	/* Get the dword offset from the channel */
> +	outb((channel >> 3) & 0xfc, MEC_ADDR);
> +	/* Get the current LED settings */
> +	reg = inb(MEC_DATA((channel >> 3) & 0x03));
> +
> +	/* Outputs are active low, so clear the bit for on, or set it for off */
> +	if (on)
> +		reg &= ~(1 << (channel & 0x7));
> +	else
> +		reg |= 1 << (channel & 0x7);
> +
> +	/* Write back the updated register */
> +	outb(reg, MEC_DATA((channel >> 3) & 0x03));
> +
> +	mutex_unlock(&mec_io_mutex);

There's an identical code block in silicom_gpio_set(). Why not simply call 
this from silicom_gpio_set()?

> +}
> +
> +static void silicom_mec_led_mc_brightness_set(struct led_classdev *led_cdev,
> +					      enum led_brightness brightness)
> +{
> +	struct led_classdev_mc *mc_cdev = lcdev_to_mccdev(led_cdev);
> +	int i;
> +
> +	led_mc_calc_color_components(mc_cdev, brightness);
> +
> +	for (i = 0; i < mc_cdev->num_colors; i++) {
> +		silicom_mec_led_set(mc_cdev->subled_info[i].channel,
> +				    mc_cdev->subled_info[i].brightness);
> +	}
> +}
> +
> +static enum led_brightness silicom_mec_led_get(int channel)
> +{
> +	u8 reg;
> +
> +	mutex_lock(&mec_io_mutex);
> +	/* Get the dword offset of the register for this LED from the channel */
> +	outb((channel >> 3) & 0xfc, MEC_ADDR);
> +	/* Get the current LED settings */
> +	reg = inb(MEC_DATA((channel >> 3) & 0x03));
> +	mutex_unlock(&mec_io_mutex);
> +
> +	/* Outputs are active low */
> +	return reg & (1 << (channel & 0x7)) ? LED_OFF : LED_ON;

Looks identical to a part of silicom_gpio_get(). Perhaps it should call 
this function??

> +}
> +
> +static enum led_brightness silicom_mec_led_mc_brightness_get(struct led_classdev *led_cdev)
> +{
> +	struct led_classdev_mc *mc_cdev = lcdev_to_mccdev(led_cdev);
> +	enum led_brightness brightness = LED_OFF;
> +	int i;
> +
> +	for (i = 0; i < mc_cdev->num_colors; i++) {
> +		mc_cdev->subled_info[i].brightness =
> +			silicom_mec_led_get(mc_cdev->subled_info[i].channel);
> +
> +		/* Mark the overall brightness as LED_ON if any of the subleds are on */
> +		if (mc_cdev->subled_info[i].brightness != LED_OFF)
> +			brightness = LED_ON;
> +	}
> +
> +	return brightness;
> +}
> +
> +
> +static u32 rpm_get(void)
> +{
> +	u32 reg;
> +	u32 bank = 0;
> +	u32 offset = 0xc;

Named with a define. Remove unnecessary local vars.

> +	u32 byte_pos = 0;
> +
> +	mutex_lock(&mec_io_mutex);
> +	/* Select memory region */
> +	outb(bank, EC_ADDR_MSB);
> +	outb(offset, EC_ADDR_LSB);
> +	/* Get current date from the address */
> +	reg = inw(MEC_DATA(byte_pos));
> +	mutex_unlock(&mec_io_mutex);
> +
> +	return reg;
> +}
> +
> +static u32 temp_get(void)
> +{
> +	u32 reg;
> +	u32 bank = 0;
> +	u32 offset = 0xc;
> +	u32 byte_pos = 0;

Ditto.

> +	mutex_lock(&mec_io_mutex);
> +	/* Select memory region */
> +	outb(bank, EC_ADDR_MSB);
> +	outb(offset, EC_ADDR_LSB);
> +	/* Get current date from the address */
> +	reg = inl(MEC_DATA(byte_pos));
> +	mutex_unlock(&mec_io_mutex);
> +
> +	return (reg >> 16) / 10;

Should that >> 16 do a FIELD_GET() for a named field, I suspect it should?

> +}
> +
> +static umode_t silicom_fan_control_fan_is_visible(const u32 attr)
> +{
> +	switch (attr) {
> +	case hwmon_fan_input:
> +	case hwmon_fan_label:
> +		return 0444;
> +	default:
> +		return 0;
> +	}
> +}
> +
> +static umode_t silicom_fan_control_temp_is_visible(const u32 attr)
> +{
> +	switch (attr) {
> +	case hwmon_temp_input:
> +	case hwmon_temp_label:
> +		return 0444;
> +	default:
> +		return 0;
> +	}
> +}
> +
> +static int silicom_fan_control_read_fan(struct device *dev, u32 attr, long *val)
> +{
> +	struct silicom_fan_control_data *ctl = dev_get_drvdata(dev);
> +
> +	switch (attr) {
> +	case hwmon_fan_input:
> +		ctl->fan_speed = rpm_get();
> +		*val = ctl->fan_speed;
> +		return 0;
> +	default:
> +		return -EOPNOTSUPP;
> +	}
> +}
> +
> +static int silicom_fan_control_read_temp(struct device *dev, u32 attr, long *val)
> +{
> +	struct silicom_fan_control_data *ctl = dev_get_drvdata(dev);
> +
> +	switch (attr) {
> +	case hwmon_temp_input:
> +		ctl->temp = temp_get();
> +		*val = ctl->temp;
> +		return 0;
> +	default:
> +		return -EOPNOTSUPP;
> +	}
> +}
> +
> +static umode_t silicom_fan_control_is_visible(const void *data,
> +					  enum hwmon_sensor_types type,
> +					  u32 attr, int channel)
> +{
> +	switch (type) {
> +	case hwmon_fan:
> +		return silicom_fan_control_fan_is_visible(attr);
> +	case hwmon_temp:
> +		return silicom_fan_control_temp_is_visible(attr);
> +	default:
> +		return 0;
> +	}
> +}
> +
> +static int silicom_fan_control_read(struct device *dev, enum hwmon_sensor_types type,
> +				    u32 attr, int channel, long *val)
> +{
> +	switch (type) {
> +	case hwmon_fan:
> +		return silicom_fan_control_read_fan(dev, attr, val);
> +	case hwmon_temp:
> +		return silicom_fan_control_read_temp(dev, attr, val);
> +	default:
> +		return -EOPNOTSUPP;
> +	}
> +}
> +
> +static int silicom_fan_control_read_labels(struct device *dev, enum hwmon_sensor_types type,
> +					   u32 attr, int channel, const char **str)
> +{
> +	switch (type) {
> +	case hwmon_fan:
> +		*str = "Fan Speed (RPM)";
> +		return 0;
> +	case hwmon_temp:
> +		*str = "Thermostat Sensor";
> +		return 0;
> +	default:
> +		return -EOPNOTSUPP;
> +	}
> +}
> +
> +static int silicom_fan_control_write(struct device *dev, enum hwmon_sensor_types type,
> +				     u32 attr, int channel, long val)
> +{
> +	return 0;
> +}
> +
> +static const struct hwmon_ops silicom_fan_control_hwmon_ops = {
> +	.is_visible = silicom_fan_control_is_visible,
> +	.read = silicom_fan_control_read,
> +	.write = silicom_fan_control_write,
> +	.read_string = silicom_fan_control_read_labels,
> +};
> +
> +static const struct hwmon_chip_info silicom_chip_info = {
> +	.ops = &silicom_fan_control_hwmon_ops,
> +	.info = silicom_fan_control_info,
> +};
> +
> +static int __init silicom_platform_probe(struct platform_device *device)
> +{
> +	int i, err;
> +	u8 magic, ver;
> +	struct silicom_fan_control_data *ctl;
> +	const char *name = "Silocom_Fan_Monitor";
> +	const char *dev_name = "Silicom_platform";
> +
> +	mec_io_base = 0x0800;
> +	mec_io_len = 8;
> +	if (!devm_request_region(&device->dev, mec_io_base, mec_io_len, "mec")) {
> +		dev_err(&device->dev, "couldn't reserve MEC io ports\n");
> +		return -EBUSY;
> +	}
> +
> +	/* Sanity check magic number read for EC */
> +	outb(0x00, MEC_ADDR);
> +	magic = inb(MEC_DATA(0));
> +	ver = inb(MEC_DATA(1));

0 and 1 should be named with defines.

> +	dev_dbg(&device->dev, "EC magic 0x%02x, version 0x%02x\n", magic, ver);
> +
> +	if (magic != SILICOM_MEC_MAGIC) {
> +		dev_err(&device->dev, "Bad EC magic 0x%02x!\n", magic);
> +		return -ENODEV;
> +	}
> +
> +	if (silicom_led_info) {

How can this be NULL?

> +		err = silicom_mc_leds_register(&device->dev, silicom_led_info);
> +		if (err) {
> +			dev_err(&device->dev, "Failed to register LEDs\n");
> +			return err;
> +		}
> +	}
> +
> +	if (silicom_gpiochip) {

How can this be NULL?

> +		err = devm_gpiochip_add_data(&device->dev, silicom_gpiochip, silicom_gpio_channels);
> +		if (err) {
> +			dev_err(&device->dev, "Failed to register gpiochip: %d\n", err);
> +			return err;
> +		}
> +	}
> +
> +	ctl = devm_kzalloc(&device->dev, sizeof(*ctl), GFP_KERNEL);
> +	if (!ctl)
> +		return -ENOMEM;
> +
> +	ctl->hdev = devm_hwmon_device_register_with_info(&device->dev, name, ctl,
> +				&silicom_chip_info, NULL);
> +
> +	my_dev_ctl.my_dev = root_device_register(dev_name);
> +	for (i = 0; i < ARRAY_SIZE(my_dev_attr); i++) {
> +		err = sysfs_create_file(&my_dev_ctl.my_dev->kobj, &my_dev_attr[i].attr);
> +		if (err) {
> +			pr_debug("failed to create the foo file in /sys/devices/Silicom_platform\n");
> +			break;
> +		}
> +	}
> +
> +	return err;
> +}
> +
> +static int __init silicom_platform_info_init(const struct dmi_system_id *id)
> +{
> +	struct silicom_platform_info *info = id->driver_data;
> +
> +	dev_info(&silicom_platform_dev->dev, "Detected %s\n", id->ident);
> +
> +	mec_io_base = info->io_base;
> +	mec_io_len = info->io_len;
> +	silicom_led_info = info->led_info;
> +	silicom_gpio_channels = info->gpio_channels;
> +	silicom_gpiochip = info->gpiochip;
> +	if (silicom_gpiochip)

How can this be NULL?

> +		silicom_gpiochip->ngpio = info->ngpio;
> +
> +	return 1;
> +}
> +
> +static const struct dmi_system_id silicom_dmi_ids[] __initconst = {
> +	{
> +		.callback = silicom_platform_info_init,
> +		.ident = "Silicom Cordoba (Generic)",
> +		.matches = {
> +			DMI_MATCH(DMI_BOARD_VENDOR, "Silicom"),
> +			DMI_MATCH(DMI_BOARD_NAME, "80300-0214-G"),
> +		},
> +		.driver_data = &silicom_generic_cordoba_info,
> +	},
> +	{
> +		.callback = silicom_platform_info_init,
> +		.ident = "Silicom Cordoba (Generic)",
> +		.matches = {
> +			DMI_MATCH(DMI_BOARD_VENDOR, "Silicom"),
> +			DMI_MATCH(DMI_BOARD_NAME, "80500-0214-G"),
> +		},
> +		.driver_data = &silicom_generic_cordoba_info,
> +	},
> +	{
> +		 .callback = silicom_platform_info_init,
> +		 .ident = "Silicom Cordoba (plat_0222)",
> +		 .matches = {
> +		       DMI_MATCH(DMI_BOARD_VENDOR, "Silicom"),
> +		       DMI_MATCH(DMI_BOARD_NAME, "80300-0222-G"),
> +		 },

Incorrect indentation x6.

> +		.driver_data = &silicom_plat_0222_cordoba_info,
> +	},
> +	{ },
> +};
> +
> +static int __init silicom_platform_init(void)
> +{
> +	struct device *dev;
> +	int err;
> +
> +	/* register a platform device to act as the parent for LEDS, etc. */
> +	silicom_platform_dev = platform_device_register_simple("silicom-platform", -1, NULL, 0);
> +	if (IS_ERR(silicom_platform_dev)) {
> +		err = PTR_ERR(silicom_platform_dev);
> +		pr_err("failed to register silicom-platform device: %d\n", err);
> +		goto silicom_init_register_err;
> +	}
> +	dev = &silicom_platform_dev->dev;
> +
> +	err = dmi_check_system(silicom_dmi_ids);
> +	if (err == 0) {
> +		dev_err(dev, "No DMI match for this platform\n");
> +		err = -ENODEV;
> +		goto silicom_init_probe_err;
> +	}
> +
> +	/* Directly probe the platform driver in init since this isn't a
> +	 * hotpluggable device.  That means we don't need to register a driver
> +	 * that needs to wait around in memory on the chance a matching device
> +	 * would get added.  Instead run once in __init so that we can free all
> +	 * those resources when the __init region is wiped
> +	 */
> +	err = platform_driver_probe(&silicom_platform_driver, silicom_platform_probe);
> +	if (err) {
> +		dev_err(dev, "Failed to probe platform driver %d\n", err);
> +		goto silicom_init_probe_err;
> +	}
> +
> +	return 0;
> +
> +silicom_init_probe_err:
> +	if (silicom_platform_dev) {

How can this by NULL?

> +		platform_device_unregister(silicom_platform_dev);
> +		silicom_platform_dev = NULL;

Seems unnecessary.

> +	}
> +	if (my_dev_ctl.my_dev) {
> +		root_device_unregister(my_dev_ctl.my_dev);
> +		my_dev_ctl.my_dev = NULL;

Ditto.

> +	}
> +
> +silicom_init_register_err:
> +	return err;
> +}
> +
> +static void __exit silicom_platform_exit(void)
> +{
> +	int i;
> +
> +	if (silicom_platform_dev) {
> +		platform_device_unregister(silicom_platform_dev);
> +		platform_driver_unregister(&silicom_platform_driver);
> +	}
> +
> +	if (my_dev_ctl.my_dev) {
> +		for (i = 0; i < ARRAY_SIZE(my_dev_attr); i++)
> +			sysfs_remove_file(&my_dev_ctl.my_dev->kobj, &my_dev_attr[i].attr);
> +		root_device_unregister(my_dev_ctl.my_dev);
> +	}
> +	mutex_destroy(&mec_io_mutex);
> +}
> +
> +module_init(silicom_platform_init);
> +module_exit(silicom_platform_exit);
> +
> +MODULE_LICENSE("GPL");
> +MODULE_AUTHOR("Henry Shi <henrys@silicom-usa.com>");
> +MODULE_DESCRIPTION("Platform driver for Silicom network appliances");
> +
> +MODULE_DEVICE_TABLE(dmi, silicom_dmi_ids);
> +

Extra newline in the end.
Huibin Shi July 25, 2023, 8:29 p.m. UTC | #3
Guenter,

See my comments below.

Updated patch will be sent out later after review comments from other people are also addressed. 

Thanks.
Henry
-----Original Message-----
From: Guenter Roeck <groeck7@gmail.com> On Behalf Of Guenter Roeck
Sent: Tuesday, July 18, 2023 12:41 PM
To: Henry Shi <henryshi2018@gmail.com>; hbshi69@hotmail.com; tglx@linutronix.de; mingo@redhat.com; bp@alien8.de; dave.hansen@linux.intel.com; x86@kernel.org; hpa@zytor.com; hdegoede@redhat.com; markgross@kernel.org; jdelvare@suse.com; linux-kernel@vger.kernel.org; platform-driver-x86@vger.kernel.org; linux-hwmon@vger.kernel.org
Cc: hb_shi2003@yahoo.com; Huibin Shi <henrys@silicom-usa.com>; Wen Wang <wenw@silicom-usa.com>
Subject: Re: [PATCH] Add Silicom Platform Driver

Caution: This is an external email. Please take care when clicking links or opening attachments.


On 7/18/23 09:01, Henry Shi wrote:
> The Silicom platform (silicom-platform) Linux driver for Swisscom 
> Business Box (Swisscom BB) as well as Cordoba family products is a 
> software solution designed to facilitate the efficient management and 
> control of devices through the integration of various Linux 
> frameworks. This platform driver provides seamless support for device 
> management via the Linux LED framework, GPIO framework, Hardware 
> Monitoring (HWMON), and device attributes. The Silicom platform 
> driver's compatibility with these Linux frameworks allows applications 
> to access and control Cordoba family devices using existing software 
> that is compatible with these frameworks. This compatibility 
> simplifies the development process, reduces dependencies on 
> proprietary solutions, and promotes interoperability with other 
> Linux-based systems and software.
>
> Signed-off-by: Henry Shi <henryshi2018@gmail.com>
> ---
>   drivers/platform/x86/Kconfig            |   12 +
>   drivers/platform/x86/Makefile           |    1 +
>   drivers/platform/x86/silicom-platform.c | 1123 +++++++++++++++++++++++
>   3 files changed, 1136 insertions(+)
>   create mode 100644 drivers/platform/x86/silicom-platform.c
>
> diff --git a/drivers/platform/x86/Kconfig 
> b/drivers/platform/x86/Kconfig index 22052031c719..8c0988c2b4ce 100644
> --- a/drivers/platform/x86/Kconfig
> +++ b/drivers/platform/x86/Kconfig
> @@ -188,6 +188,18 @@ config ACER_WMI
>         If you have an ACPI-WMI compatible Acer/ Wistron laptop, say Y or M
>         here.
>
> +
> +config SILICOM_PLATFORM
> +     tristate "Silicom Edge Networking device support"
> +     depends on DMI
> +     select LEDS_CLASS_MULTICOLOR
> +     select GPIOLIB
> +     help
> +       This option enables support for the LEDs/GPIO/etc downstream of the
> +       embedded controller on Silicom "Cordoba" hardware and derivatives.
> +
> +       If you have a Silicom network appliance, say Y or M here.
> +
>   source "drivers/platform/x86/amd/Kconfig"
>
>   config ADV_SWBUTTON
> diff --git a/drivers/platform/x86/Makefile 
> b/drivers/platform/x86/Makefile index 2cafe51ec4d8..f2f5743a9e54 
> 100644
> --- a/drivers/platform/x86/Makefile
> +++ b/drivers/platform/x86/Makefile
> @@ -113,6 +113,7 @@ obj-$(CONFIG_SERIAL_MULTI_INSTANTIATE)    += serial-multi-instantiate.o
>   obj-$(CONFIG_MLX_PLATFORM)          += mlx-platform.o
>   obj-$(CONFIG_TOUCHSCREEN_DMI)               += touchscreen_dmi.o
>   obj-$(CONFIG_WIRELESS_HOTKEY)               += wireless-hotkey.o
> +obj-$(CONFIG_SILICOM_PLATFORM)          += silicom-platform.o
>   obj-$(CONFIG_X86_ANDROID_TABLETS)   += x86-android-tablets/
>
>   # Intel uncore drivers
> diff --git a/drivers/platform/x86/silicom-platform.c 
> b/drivers/platform/x86/silicom-platform.c
> new file mode 100644
> index 000000000000..90431f733682
> --- /dev/null
> +++ b/drivers/platform/x86/silicom-platform.c
> @@ -0,0 +1,1123 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +//
> +// silicom-platform.c - Silicom MEC170x platform driver // // 
> +Copyright (C) 2023 Henry Shi <henrys@silicom-usa.com>
> +
> +#include <linux/dmi.h>
> +#include <linux/gpio/driver.h>
> +#include <linux/init.h>
> +#include <linux/ioport.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/led-class-multicolor.h> #include <linux/module.h> 
> +#include <linux/hwmon.h> #include <linux/mutex.h> #include 
> +<linux/platform_device.h> #include <linux/string.h> #include 
> +<linux/thermal.h>

What is this include for ?

Henry: OK, removed.

> +#include <linux/kobject.h>
> +#include <linux/sysfs.h>
> +
> +#define MEC_ADDR ((mec_io_base) + 0x02) #define MEC_DATA(byte) 
> +((mec_io_base) + 0x04 + (byte)) #define EC_ADDR_LSB MEC_ADDR #define 
> +EC_ADDR_MSB ((mec_io_base) + 0x03) #define SILICOM_MEC_MAGIC 0x5a 
> +#define OFFSET_BIT_TO_CHANNEL(off, bit) ((((off) + 0x014) << 3) | 
> +(bit)) #define CHANNEL_TO_OFFSET(chan) (((chan) >> 3) - 0x14) #define 
> +CHANNEL_TO_BIT(chan) ((chan) & 0x07)
> +
> +static DEFINE_MUTEX(mec_io_mutex);
> +static int mec_io_base, mec_io_len;

mec_io_base is always 0x0800 and mec_io_len is always 0x8.
Why all that complexity with assigning values to those static variables instead of just using defines ?

> +
> +struct silicom_fan_control_data {
> +     struct   device *hdev;
> +     int      temp;
> +     int      fan_speed;
> +};

I do not see the point of having this data structure. Values are only written into it and never read.

Henry: The intention is to group all static variables for hwmon function together. 

> +
> +static const struct hwmon_channel_info *silicom_fan_control_info[] = {
> +     HWMON_CHANNEL_INFO(fan, HWMON_F_INPUT | HWMON_F_LABEL),
> +     HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT | HWMON_T_LABEL),
> +     NULL
> +};
> +
> +struct silicom_device_control_data {
> +     struct   device *my_dev;
> +     int      efuse_status;
> +     int      uc_version;
> +     int      power_cycle;
> +};
> +static struct silicom_device_control_data my_dev_ctl;
> +
> +struct silicom_platform_info {
> +     int io_base;
> +     int io_len;
> +     struct led_classdev_mc *led_info;
> +     struct gpio_chip *gpiochip;
> +     u8 *gpio_channels;
> +     u16 ngpio;
> +};
> +
> +static const char * const plat_0222_gpio_names[] = {
> +     "AUTOM0_SFP_TX_FAULT",
> +     "SLOT2_LED_OUT",
> +     "SIM_M2_SLOT2_B_DET",
> +     "SIM_M2_SLOT2_A_DET",
> +     "SLOT1_LED_OUT",
> +     "SIM_M2_SLOT1_B_DET",
> +     "SIM_M2_SLOT1_A_DET",
> +     "SLOT0_LED_OUT",
> +     "WAN_SFP0_RX_LOS",
> +     "WAN_SFP0_PRSNT_N",
> +     "WAN_SFP0_TX_FAULT",
> +     "AUTOM1_SFP_RX_LOS",
> +     "AUTOM1_SFP_PRSNT_N",
> +     "AUTOM1_SFP_TX_FAULT",
> +     "AUTOM0_SFP_RX_LOS",
> +     "AUTOM0_SFP_PRSNT_N",
> +     "WAN_SFP1_RX_LOS",
> +     "WAN_SFP1_PRSNT_N",
> +     "WAN_SFP1_TX_FAULT",
> +     "SIM_M2_SLOT1_MUX_SEL",
> +     "W_DISABLE_M2_SLOT1_N",
> +     "W_DISABLE_MPCIE_SLOT0_N",
> +     "W_DISABLE_M2_SLOT0_N",
> +     "BT_COMMAND_MODE",
> +     "WAN_SFP1_TX_DISABLE",
> +     "WAN_SFP0_TX_DISABLE",
> +     "AUTOM1_SFP_TX_DISABLE",
> +     "AUTOM0_SFP_TX_DISABLE",
> +     "SIM_M2_SLOT2_MUX_SEL",
> +     "W_DISABLE_M2_SLOT2_N",
> +     "RST_CTL_M2_SLOT_1_N",
> +     "RST_CTL_M2_SLOT_2_N",
> +     "PM_USB_PWR_EN_BOT",
> +     "PM_USB_PWR_EN_TOP",
> +};
> +
> +static u8 plat_0222_gpio_channels[] = {
> +     OFFSET_BIT_TO_CHANNEL(0x00, 0),
> +     OFFSET_BIT_TO_CHANNEL(0x00, 1),
> +     OFFSET_BIT_TO_CHANNEL(0x00, 2),
> +     OFFSET_BIT_TO_CHANNEL(0x00, 3),
> +     OFFSET_BIT_TO_CHANNEL(0x00, 4),
> +     OFFSET_BIT_TO_CHANNEL(0x00, 5),
> +     OFFSET_BIT_TO_CHANNEL(0x00, 6),
> +     OFFSET_BIT_TO_CHANNEL(0x00, 7),
> +     OFFSET_BIT_TO_CHANNEL(0x01, 0),
> +     OFFSET_BIT_TO_CHANNEL(0x01, 1),
> +     OFFSET_BIT_TO_CHANNEL(0x01, 2),
> +     OFFSET_BIT_TO_CHANNEL(0x01, 3),
> +     OFFSET_BIT_TO_CHANNEL(0x01, 4),
> +     OFFSET_BIT_TO_CHANNEL(0x01, 5),
> +     OFFSET_BIT_TO_CHANNEL(0x01, 6),
> +     OFFSET_BIT_TO_CHANNEL(0x01, 7),
> +     OFFSET_BIT_TO_CHANNEL(0x02, 0),
> +     OFFSET_BIT_TO_CHANNEL(0x02, 1),
> +     OFFSET_BIT_TO_CHANNEL(0x02, 2),
> +     OFFSET_BIT_TO_CHANNEL(0x09, 0),
> +     OFFSET_BIT_TO_CHANNEL(0x09, 1),
> +     OFFSET_BIT_TO_CHANNEL(0x09, 2),
> +     OFFSET_BIT_TO_CHANNEL(0x09, 3),
> +     OFFSET_BIT_TO_CHANNEL(0x0a, 0),
> +     OFFSET_BIT_TO_CHANNEL(0x0a, 1),
> +     OFFSET_BIT_TO_CHANNEL(0x0a, 2),
> +     OFFSET_BIT_TO_CHANNEL(0x0a, 3),
> +     OFFSET_BIT_TO_CHANNEL(0x0a, 4),
> +     OFFSET_BIT_TO_CHANNEL(0x0a, 5),
> +     OFFSET_BIT_TO_CHANNEL(0x0a, 6),
> +     OFFSET_BIT_TO_CHANNEL(0x0b, 0),
> +     OFFSET_BIT_TO_CHANNEL(0x0b, 1),
> +     OFFSET_BIT_TO_CHANNEL(0x0b, 2),
> +     OFFSET_BIT_TO_CHANNEL(0x0b, 3),
> +};
> +
> +static int silicom_gpio_get_direction(struct gpio_chip *gc, unsigned 
> +int offset); static int silicom_gpio_direction_input(struct gpio_chip 
> +*gc, unsigned int offset); static int 
> +silicom_gpio_direction_output(struct gpio_chip *gc, unsigned int 
> +offset, int value); static int silicom_gpio_get(struct gpio_chip *gc, 
> +unsigned int offset); static void silicom_gpio_set(struct gpio_chip *gc, unsigned int offset, int value); static void silicom_mec_led_mc_brightness_set(struct led_classdev *led_cdev,
> +                                           enum led_brightness 
> +brightness); static enum led_brightness 
> +silicom_mec_led_mc_brightness_get(struct led_classdev *led_cdev); 
> +static struct platform_device *silicom_platform_dev; static struct 
> +led_classdev_mc *silicom_led_info __initdata; static struct gpio_chip 
> +*silicom_gpiochip __initdata; static u8 *silicom_gpio_channels 
> +__initdata; static struct gpio_chip silicom_gpio_chip = {
> +     .label = "silicom-gpio",
> +     .get_direction = silicom_gpio_get_direction,
> +     .direction_input = silicom_gpio_direction_input,
> +     .direction_output = silicom_gpio_direction_output,
> +     .get = silicom_gpio_get,
> +     .set = silicom_gpio_set,
> +     .base = -1,
> +     .ngpio = ARRAY_SIZE(plat_0222_gpio_channels),
> +     .names = plat_0222_gpio_names,
> +     /* We're using a mutex to protect the indirect access, so we can sleep if the lock blocks */
> +     .can_sleep = true,
> +};
> +
> +static struct mc_subled plat_0222_wan_mc_subled_info[] __initdata = {
> +     {
> +             .color_index = LED_COLOR_ID_WHITE,
> +             .brightness = 1,
> +             .intensity = 0,
> +             .channel = OFFSET_BIT_TO_CHANNEL(0x0c, 7),
> +     },
> +     {
> +             .color_index = LED_COLOR_ID_YELLOW,
> +             .brightness = 1,
> +             .intensity = 0,
> +             .channel = OFFSET_BIT_TO_CHANNEL(0x0c, 6),
> +     },
> +     {
> +             .color_index = LED_COLOR_ID_RED,
> +             .brightness = 1,
> +             .intensity = 0,
> +             .channel = OFFSET_BIT_TO_CHANNEL(0x0c, 5),
> +     },
> +};
> +
> +static struct mc_subled plat_0222_sys_mc_subled_info[] __initdata = {
> +     {
> +             .color_index = LED_COLOR_ID_WHITE,
> +             .brightness = 1,
> +             .intensity = 0,
> +             .channel = OFFSET_BIT_TO_CHANNEL(0x0c, 4),
> +     },
> +     {
> +             .color_index = LED_COLOR_ID_AMBER,
> +             .brightness = 1,
> +             .intensity = 0,
> +             .channel = OFFSET_BIT_TO_CHANNEL(0x0c, 3),
> +     },
> +     {
> +             .color_index = LED_COLOR_ID_RED,
> +             .brightness = 1,
> +             .intensity = 0,
> +             .channel = OFFSET_BIT_TO_CHANNEL(0x0c, 2),
> +     },
> +};
> +
> +static struct mc_subled plat_0222_stat1_mc_subled_info[] __initdata = {
> +     {
> +             .color_index = LED_COLOR_ID_RED,
> +             .brightness = 1,
> +             .intensity = 0,
> +             .channel = OFFSET_BIT_TO_CHANNEL(0x0c, 1),
> +     },
> +     {
> +             .color_index = LED_COLOR_ID_GREEN,
> +             .brightness = 1,
> +             .intensity = 0,
> +             .channel = OFFSET_BIT_TO_CHANNEL(0x0c, 0),
> +     },
> +     {
> +             .color_index = LED_COLOR_ID_BLUE,
> +             .brightness = 1,
> +             .intensity = 0,
> +             .channel = OFFSET_BIT_TO_CHANNEL(0x0d, 7),
> +     },
> +     {
> +             .color_index = LED_COLOR_ID_YELLOW,
> +             .brightness = 1,
> +             .intensity = 0,
> +             .channel = OFFSET_BIT_TO_CHANNEL(0x0d, 6),
> +     },
> +};
> +
> +static struct mc_subled plat_0222_stat2_mc_subled_info[] __initdata = {
> +     {
> +             .color_index = LED_COLOR_ID_RED,
> +             .brightness = 1,
> +             .intensity = 0,
> +             .channel = OFFSET_BIT_TO_CHANNEL(0x0d, 5),
> +     },
> +     {
> +             .color_index = LED_COLOR_ID_GREEN,
> +             .brightness = 1,
> +             .intensity = 0,
> +             .channel = OFFSET_BIT_TO_CHANNEL(0x0d, 4),
> +     },
> +     {
> +             .color_index = LED_COLOR_ID_BLUE,
> +             .brightness = 1,
> +             .intensity = 0,
> +             .channel = OFFSET_BIT_TO_CHANNEL(0x0d, 3),
> +     },
> +     {
> +             .color_index = LED_COLOR_ID_YELLOW,
> +             .brightness = 1,
> +             .intensity = 0,
> +             .channel = OFFSET_BIT_TO_CHANNEL(0x0d, 2),
> +     },
> +};
> +
> +static struct mc_subled plat_0222_stat3_mc_subled_info[] __initdata = {
> +     {
> +             .color_index = LED_COLOR_ID_RED,
> +             .brightness = 1,
> +             .intensity = 0,
> +             .channel = OFFSET_BIT_TO_CHANNEL(0x0d, 1),
> +     },
> +     {
> +             .color_index = LED_COLOR_ID_GREEN,
> +             .brightness = 1,
> +             .intensity = 0,
> +             .channel = OFFSET_BIT_TO_CHANNEL(0x0d, 0),
> +     },
> +     {
> +             .color_index = LED_COLOR_ID_BLUE,
> +             .brightness = 1,
> +             .intensity = 0,
> +             .channel = OFFSET_BIT_TO_CHANNEL(0x0e, 1),
> +     },
> +     {
> +             .color_index = LED_COLOR_ID_YELLOW,
> +             .brightness = 1,
> +             .intensity = 0,
> +             .channel = OFFSET_BIT_TO_CHANNEL(0x0e, 0),
> +     },
> +};
> +
> +static struct led_classdev_mc plat_0222_mc_led_info[] __initdata = {
> +     {
> +             .led_cdev = {
> +                     .name = "multicolor:wan",
> +                     .brightness = 0,
> +                     .max_brightness = 1,
> +                     .brightness_set = silicom_mec_led_mc_brightness_set,
> +                     .brightness_get = silicom_mec_led_mc_brightness_get,
> +             },
> +             .num_colors = ARRAY_SIZE(plat_0222_wan_mc_subled_info),
> +             .subled_info = plat_0222_wan_mc_subled_info,
> +     },
> +     {
> +             .led_cdev = {
> +                     .name = "multicolor:sys",
> +                     .brightness = 0,
> +                     .max_brightness = 1,
> +                     .brightness_set = silicom_mec_led_mc_brightness_set,
> +                     .brightness_get = silicom_mec_led_mc_brightness_get,
> +             },
> +             .num_colors = ARRAY_SIZE(plat_0222_sys_mc_subled_info),
> +             .subled_info = plat_0222_sys_mc_subled_info,
> +     },
> +     {
> +             .led_cdev = {
> +                     .name = "multicolor:stat1",
> +                     .brightness = 0,
> +                     .max_brightness = 1,
> +                     .brightness_set = silicom_mec_led_mc_brightness_set,
> +                     .brightness_get = silicom_mec_led_mc_brightness_get,
> +             },
> +             .num_colors = ARRAY_SIZE(plat_0222_stat1_mc_subled_info),
> +             .subled_info = plat_0222_stat1_mc_subled_info,
> +     },
> +     {
> +             .led_cdev = {
> +                     .name = "multicolor:stat2",
> +                     .brightness = 0,
> +                     .max_brightness = 1,
> +                     .brightness_set = silicom_mec_led_mc_brightness_set,
> +                     .brightness_get = silicom_mec_led_mc_brightness_get,
> +             },
> +             .num_colors = ARRAY_SIZE(plat_0222_stat2_mc_subled_info),
> +             .subled_info = plat_0222_stat2_mc_subled_info,
> +     },
> +     {
> +             .led_cdev = {
> +                     .name = "multicolor:stat3",
> +                     .brightness = 0,
> +                     .max_brightness = 1,
> +                     .brightness_set = silicom_mec_led_mc_brightness_set,
> +                     .brightness_get = silicom_mec_led_mc_brightness_get,
> +             },
> +             .num_colors = ARRAY_SIZE(plat_0222_stat3_mc_subled_info),
> +             .subled_info = plat_0222_stat3_mc_subled_info,
> +     },
> +     { },
> +};
> +
> +static struct silicom_platform_info silicom_plat_0222_cordoba_info __initdata = {
> +     .io_base = 0x800,
> +     .io_len = 8,
> +     .led_info = plat_0222_mc_led_info,
> +     .gpiochip = &silicom_gpio_chip,
> +     .gpio_channels = plat_0222_gpio_channels,
> +     /* The original generic cordoba does not have the last 4 outputs of the plat_0222 BB variant,
> +      * the rest are the same, so use the same longer list, but ignore the last entries here
> +      */
> +     .ngpio = ARRAY_SIZE(plat_0222_gpio_channels),
> +
> +};
> +
> +static struct mc_subled cordoba_fp_left_mc_subled_info[] __initdata = {
> +     {
> +             .color_index = LED_COLOR_ID_RED,
> +             .brightness = 1,
> +             .intensity = 0,
> +             .channel = OFFSET_BIT_TO_CHANNEL(0x08, 6),
> +     },
> +     {
> +             .color_index = LED_COLOR_ID_GREEN,
> +             .brightness = 1,
> +             .intensity = 0,
> +             .channel = OFFSET_BIT_TO_CHANNEL(0x08, 5),
> +     },
> +     {
> +             .color_index = LED_COLOR_ID_BLUE,
> +             .brightness = 1,
> +             .intensity = 0,
> +             .channel = OFFSET_BIT_TO_CHANNEL(0x09, 7),
> +     },
> +     {
> +             .color_index = LED_COLOR_ID_AMBER,
> +             .brightness = 1,
> +             .intensity = 0,
> +             .channel = OFFSET_BIT_TO_CHANNEL(0x09, 4),
> +     },
> +};
> +
> +static struct mc_subled cordoba_fp_center_mc_subled_info[] __initdata = {
> +     {
> +             .color_index = LED_COLOR_ID_RED,
> +             .brightness = 1,
> +             .intensity = 0,
> +             .channel = OFFSET_BIT_TO_CHANNEL(0x08, 7),
> +     },
> +     {
> +             .color_index = LED_COLOR_ID_GREEN,
> +             .brightness = 1,
> +             .intensity = 0,
> +             .channel = OFFSET_BIT_TO_CHANNEL(0x08, 4),
> +     },
> +     {
> +             .color_index = LED_COLOR_ID_BLUE,
> +             .brightness = 1,
> +             .intensity = 0,
> +             .channel = OFFSET_BIT_TO_CHANNEL(0x08, 3),
> +     },
> +     {
> +             .color_index = LED_COLOR_ID_AMBER,
> +             .brightness = 1,
> +             .intensity = 0,
> +             .channel = OFFSET_BIT_TO_CHANNEL(0x09, 6),
> +     },
> +};
> +
> +static struct mc_subled cordoba_fp_right_mc_subled_info[] __initdata = {
> +     {
> +             .color_index = LED_COLOR_ID_RED,
> +             .brightness = 1,
> +             .intensity = 0,
> +             .channel = OFFSET_BIT_TO_CHANNEL(0x08, 2),
> +     },
> +     {
> +             .color_index = LED_COLOR_ID_GREEN,
> +             .brightness = 1,
> +             .intensity = 0,
> +             .channel = OFFSET_BIT_TO_CHANNEL(0x08, 1),
> +     },
> +     {
> +             .color_index = LED_COLOR_ID_BLUE,
> +             .brightness = 1,
> +             .intensity = 0,
> +             .channel = OFFSET_BIT_TO_CHANNEL(0x08, 0),
> +     },
> +     {
> +             .color_index = LED_COLOR_ID_AMBER,
> +             .brightness = 1,
> +             .intensity = 0,
> +             .channel = OFFSET_BIT_TO_CHANNEL(0x09, 5),
> +     },
> +};
> +
> +static struct led_classdev_mc cordoba_mc_led_info[] __initdata = {
> +     {
> +             .led_cdev = {
> +                     .name = "multicolor:fp_left",
> +                     .brightness = 0,
> +                     .max_brightness = 1,
> +                     .brightness_set = silicom_mec_led_mc_brightness_set,
> +                     .brightness_get = silicom_mec_led_mc_brightness_get,
> +             },
> +             .num_colors = ARRAY_SIZE(cordoba_fp_left_mc_subled_info),
> +             .subled_info = cordoba_fp_left_mc_subled_info,
> +     },
> +     {
> +             .led_cdev = {
> +                     .name = "multicolor:fp_center",
> +                     .brightness = 0,
> +                     .max_brightness = 1,
> +                     .brightness_set = silicom_mec_led_mc_brightness_set,
> +                     .brightness_get = silicom_mec_led_mc_brightness_get,
> +             },
> +             .num_colors = ARRAY_SIZE(cordoba_fp_center_mc_subled_info),
> +             .subled_info = cordoba_fp_center_mc_subled_info,
> +     },
> +     {
> +             .led_cdev = {
> +                     .name = "multicolor:fp_right",
> +                     .brightness = 0,
> +                     .max_brightness = 1,
> +                     .brightness_set = silicom_mec_led_mc_brightness_set,
> +                     .brightness_get = silicom_mec_led_mc_brightness_get,
> +             },
> +             .num_colors = ARRAY_SIZE(cordoba_fp_right_mc_subled_info),
> +             .subled_info = cordoba_fp_right_mc_subled_info,
> +     },
> +     { },
> +};
> +
> +static struct silicom_platform_info silicom_generic_cordoba_info __initdata = {
> +     .io_base = 0x800,
> +     .io_len = 8,
> +     .led_info = cordoba_mc_led_info,
> +     .gpiochip = &silicom_gpio_chip,
> +     .gpio_channels = plat_0222_gpio_channels,
> +     .ngpio = ARRAY_SIZE(plat_0222_gpio_channels),
> +};
> +
> +static struct platform_driver silicom_platform_driver = {
> +     .driver = {
> +             .name = "silicom-platform",
> +     },
> +};
> +
> +void lock_io_modules(void)
> +{
> +     mutex_lock(&mec_io_mutex);
> +}
> +EXPORT_SYMBOL(lock_io_modules);
> +
> +void unlock_io_modules(void)
> +{
> +     mutex_unlock(&mec_io_mutex);
> +}
> +EXPORT_SYMBOL(unlock_io_modules);
> +
> +static ssize_t efuse_status_show(struct device *dev, struct device_attribute *attr,
> +                   char *buf)
> +{
> +     u32 reg;
> +     u32 bank = 0;
> +     u32 offset = 0x28;
> +     u32 byte_pos = 0;
> +
> +     mutex_lock(&mec_io_mutex);
> +     /* Select memory region */
> +     outb(bank, EC_ADDR_MSB);
> +     outb(offset, EC_ADDR_LSB);
> +
> +     /* Get current date from the address */
> +     reg = inl(MEC_DATA(byte_pos));
> +     mutex_unlock(&mec_io_mutex);
> +
> +     my_dev_ctl.efuse_status = reg & 0x1;
> +
> +     return sprintf(buf, "%d\n", my_dev_ctl.efuse_status); }
> +
> +static ssize_t uc_version_show(struct device *dev,
> +                            struct device_attribute *attr,
> +                            char *buf) {
> +     u32 reg;
> +     u32 bank = 0;
> +     u32 offset = 0x0;
> +     u32 byte_pos = 0;
> +     int uc_version;
> +
> +     mutex_lock(&mec_io_mutex);
> +     outb(bank, EC_ADDR_MSB);
> +     outb(offset, EC_ADDR_LSB);
> +
> +     reg = inl(MEC_DATA(byte_pos));
> +     mutex_unlock(&mec_io_mutex);
> +
> +     uc_version = (reg >> 8) & 0xFF;
> +     if (uc_version >= 64 && uc_version < 128) {
> +             uc_version = uc_version - 64;
> +             if (uc_version < 10)
> +                     uc_version = 100 + uc_version;
> +             else
> +                     uc_version = 100 + 10 * (uc_version / 10) + uc_version % 10;
> +     } else if (uc_version >= 128 && uc_version < 192) {
> +             uc_version = uc_version - 128;
> +             if (uc_version < 10)
> +                     uc_version = 200 + uc_version;
> +             else
> +                     uc_version = 200 + 10 * (uc_version / 10) + uc_version % 10;
> +     }
> +     my_dev_ctl.uc_version = uc_version;
> +     return sprintf(buf, "%d\n", my_dev_ctl.uc_version); }
> +
> +static ssize_t power_cycle_show(struct device *dev,
> +                             struct device_attribute *attr,
> +                             char *buf) {
> +     return sprintf(buf, "%d\n", my_dev_ctl.power_cycle); }
> +
> +static void powercycle_uc(void)
> +{
> +     u32 bank = 0;
> +     u32 offset = 0x24;
> +     u32 byte_pos = 0;
> +
> +     mutex_lock(&mec_io_mutex);
> +     /* Select memory region */
> +     outb(bank, EC_ADDR_MSB);
> +     outb(offset, EC_ADDR_LSB);
> +
> +     /* Set to 1 for current date from the address */
> +     outb(1, MEC_DATA(byte_pos));
> +     mutex_unlock(&mec_io_mutex);
> +}
> +
> +static ssize_t power_cycle_store(struct device *dev, struct device_attribute *attr,
> +                              const char *buf, size_t count) {
> +     if (sscanf(buf, "%du", &my_dev_ctl.power_cycle) != 1) {
> +             dev_err(dev, "Failed to read power_cycle\n");
> +             return -EINVAL;
> +     }
> +     if (my_dev_ctl.power_cycle > 0)
> +             powercycle_uc();
> +
> +     return count;
> +}
> +
> +static struct device_attribute my_dev_attr[] = {
> +     {
> +             .attr = {.name = "efuse_status", .mode = 0644},
> +             .show = efuse_status_show,
> +             .store = NULL
> +     },
> +     {
> +             .attr = {.name = "uc_version", .mode = 0644},
> +             .show = uc_version_show,
> +             .store = NULL
> +     },
> +     {
> +             .attr = {.name = "power_cycle", .mode = 0644},
> +             .show = power_cycle_show,
> +             .store = power_cycle_store
> +     },
> +};
> +
> +static int silicom_gpio_get_direction(struct gpio_chip *gc, unsigned 
> +int offset) {
> +     u8 *channels = gpiochip_get_data(gc);
> +
> +     /* Input registers have offsets between [0x00, 0x07] */
> +     if (CHANNEL_TO_OFFSET(channels[offset]) < 0x08)
> +             return GPIO_LINE_DIRECTION_IN;
> +
> +     return GPIO_LINE_DIRECTION_OUT;
> +}
> +
> +static int silicom_gpio_direction_input(struct gpio_chip *gc, 
> +unsigned int offset) {
> +     int direction = silicom_gpio_get_direction(gc, offset);
> +
> +     return direction == GPIO_LINE_DIRECTION_IN ? 0 : -EINVAL; }
> +
> +static void silicom_gpio_set(struct gpio_chip *gc, unsigned int 
> +offset, int value) {
> +     u8 *channels = gpiochip_get_data(gc);
> +     int direction = silicom_gpio_get_direction(gc, offset);
> +     int channel = channels[offset];
> +     u8 reg;
> +
> +     if (direction == GPIO_LINE_DIRECTION_IN)
> +             return;
> +
> +     mutex_lock(&mec_io_mutex);
> +     /* Get the dword offset from the channel */
> +     outb((channel >> 3) & 0xfc, MEC_ADDR);
> +
> +     /* Get the current register */
> +     reg = inb(MEC_DATA((channel >> 3) & 0x03));
> +     if (value == 0)
> +             reg &= ~(1 << (channel & 0x7));
> +     else if (value > 0)
> +             reg |= 1 << (channel & 0x7);
> +     else
> +             pr_err("Invalid GPIO value: %d\n", value);
> +     outb(reg, MEC_DATA((channel >> 3) & 0x03));
> +     mutex_unlock(&mec_io_mutex);
> +}
> +
> +static int silicom_gpio_direction_output(struct gpio_chip *gc, 
> +unsigned int offset, int value) {
> +     int direction = silicom_gpio_get_direction(gc, offset);
> +
> +     if (direction == GPIO_LINE_DIRECTION_IN)
> +             return -EINVAL;
> +
> +     silicom_gpio_set(gc, offset, value);
> +
> +     return 0;
> +}
> +
> +static int silicom_gpio_get(struct gpio_chip *gc, unsigned int 
> +offset) {
> +     u8 *channels = gpiochip_get_data(gc);
> +     int channel = channels[offset];
> +     u8 reg;
> +
> +     mutex_lock(&mec_io_mutex);
> +     /* Get the dword offset from the channel */
> +     outb((channel >> 3) & 0xfc, MEC_ADDR);
> +
> +     /* Get the current register */
> +     reg = inb(MEC_DATA((channel >> 3) & 0x03));
> +     mutex_unlock(&mec_io_mutex);
> +
> +     return (reg >> (channel & 0x7)) & 0x01; }
> +
> +static int __init silicom_mc_leds_register(struct device *dev,
> +                                        const struct led_classdev_mc 
> +*mc_leds) {
> +     struct led_classdev_mc *led;
> +     int i, err;
> +
> +     for (i = 0; mc_leds[i].led_cdev.name; i++) {
> +             /* allocate and copy data from the init constansts */
> +             led = devm_kzalloc(dev, sizeof(struct led_classdev_mc), GFP_KERNEL);
> +             if (IS_ERR_OR_NULL(led)) {
> +                     dev_err(dev, "Failed to alloc led_classdev_mc[%d]: %ld\n", i, PTR_ERR(led));
> +                     return -ENOMEM;
> +             }
> +             memcpy(led, &mc_leds[i], sizeof(*led));
> +
> +             led->subled_info = devm_kzalloc(dev, led->num_colors * sizeof(struct mc_subled),
> +                                             GFP_KERNEL);
> +             if (IS_ERR_OR_NULL(led->subled_info)) {
> +                     dev_err(dev, "Failed to alloc subled_info[%d]: %ld\n",
> +                             i, PTR_ERR(led->subled_info));
> +                     return -ENOMEM;
> +             }
> +             memcpy(led->subled_info, mc_leds[i].subled_info,
> +                     led->num_colors * sizeof(struct mc_subled));
> +
> +             err = devm_led_classdev_multicolor_register(dev, led);
> +             if (err) {
> +                     dev_err(dev, "Failed to register[%d]: %d\n", i, err);
> +                     return err;
> +             }
> +     }
> +
> +     return 0;
> +}
> +
> +static void silicom_mec_led_set(int channel, int on) {
> +     u8 reg;
> +
> +     mutex_lock(&mec_io_mutex);
> +     /* Get the dword offset from the channel */
> +     outb((channel >> 3) & 0xfc, MEC_ADDR);
> +
> +     /* Get the current LED settings */
> +     reg = inb(MEC_DATA((channel >> 3) & 0x03));
> +
> +     /* Outputs are active low, so clear the bit for on, or set it for off */
> +     if (on)
> +             reg &= ~(1 << (channel & 0x7));
> +     else
> +             reg |= 1 << (channel & 0x7);
> +
> +     /* Write back the updated register */
> +     outb(reg, MEC_DATA((channel >> 3) & 0x03));
> +
> +     mutex_unlock(&mec_io_mutex);
> +}
> +
> +static void silicom_mec_led_mc_brightness_set(struct led_classdev *led_cdev,
> +                                           enum led_brightness 
> +brightness) {
> +     struct led_classdev_mc *mc_cdev = lcdev_to_mccdev(led_cdev);
> +     int i;
> +
> +     led_mc_calc_color_components(mc_cdev, brightness);
> +
> +     for (i = 0; i < mc_cdev->num_colors; i++) {
> +             silicom_mec_led_set(mc_cdev->subled_info[i].channel,
> +                                 mc_cdev->subled_info[i].brightness);
> +     }
> +}
> +
> +static enum led_brightness silicom_mec_led_get(int channel) {
> +     u8 reg;
> +
> +     mutex_lock(&mec_io_mutex);
> +     /* Get the dword offset of the register for this LED from the channel */
> +     outb((channel >> 3) & 0xfc, MEC_ADDR);
> +     /* Get the current LED settings */
> +     reg = inb(MEC_DATA((channel >> 3) & 0x03));
> +     mutex_unlock(&mec_io_mutex);
> +
> +     /* Outputs are active low */
> +     return reg & (1 << (channel & 0x7)) ? LED_OFF : LED_ON; }
> +
> +static enum led_brightness silicom_mec_led_mc_brightness_get(struct 
> +led_classdev *led_cdev) {
> +     struct led_classdev_mc *mc_cdev = lcdev_to_mccdev(led_cdev);
> +     enum led_brightness brightness = LED_OFF;
> +     int i;
> +
> +     for (i = 0; i < mc_cdev->num_colors; i++) {
> +             mc_cdev->subled_info[i].brightness =
> +                     
> + silicom_mec_led_get(mc_cdev->subled_info[i].channel);
> +
> +             /* Mark the overall brightness as LED_ON if any of the subleds are on */
> +             if (mc_cdev->subled_info[i].brightness != LED_OFF)
> +                     brightness = LED_ON;
> +     }
> +
> +     return brightness;
> +}
> +
> +
> +static u32 rpm_get(void)
> +{
> +     u32 reg;
> +     u32 bank = 0;
> +     u32 offset = 0xc;
> +     u32 byte_pos = 0;

Pointless variables.

Henry: Ilpo also pointed out this. There variable will be removed.

> +
> +     mutex_lock(&mec_io_mutex);
> +     /* Select memory region */
> +     outb(bank, EC_ADDR_MSB);
> +     outb(offset, EC_ADDR_LSB);
> +     /* Get current date from the address */

date or data ?

Henry: corrected this typo here, and other three locations.

> +     reg = inw(MEC_DATA(byte_pos));
> +     mutex_unlock(&mec_io_mutex);

I think this should be handled in a function.

        return silicom_read_word(0xc);

with the above implemented in silicom_read_word().
Same for functions reading 8- or 32-bit data.

Henry: In my opinion, Linux already has inw(), inb function for io port access. There is no much value to wrap them with other functions.


> +
> +     return reg;
> +}
> +
> +static u32 temp_get(void)
> +{
> +     u32 reg;
> +     u32 bank = 0;
> +     u32 offset = 0xc;
> +     u32 byte_pos = 0;
> +
> +     mutex_lock(&mec_io_mutex);
> +     /* Select memory region */
> +     outb(bank, EC_ADDR_MSB);
> +     outb(offset, EC_ADDR_LSB);
> +     /* Get current date from the address */

data ?

Henry: typo will be corrected.

> +     reg = inl(MEC_DATA(byte_pos));
> +     mutex_unlock(&mec_io_mutex);
> +
> +     return (reg >> 16) / 10;

That doesn't look correct. Please confirm that the temperature is indeed reported in 1/10000th degress C by the chip.

Henry: This is to correct micro-controller firmware implementation: when firmware put temperature to the register, it put (real temperature * 10) as an integer to the register. (This is for internal debugging purpose, to get temperature with more precision). But the kernel driver need report real temperature.  

> +}
> +
> +static umode_t silicom_fan_control_fan_is_visible(const u32 attr) {
> +     switch (attr) {
> +     case hwmon_fan_input:
> +     case hwmon_fan_label:
> +             return 0444;
> +     default:
> +             return 0;
> +     }
> +}
> +
> +static umode_t silicom_fan_control_temp_is_visible(const u32 attr) {
> +     switch (attr) {
> +     case hwmon_temp_input:
> +     case hwmon_temp_label:
> +             return 0444;
> +     default:
> +             return 0;
> +     }
> +}
> +
> +static int silicom_fan_control_read_fan(struct device *dev, u32 attr, 
> +long *val) {
> +     struct silicom_fan_control_data *ctl = dev_get_drvdata(dev);
> +
> +     switch (attr) {
> +     case hwmon_fan_input:
> +             ctl->fan_speed = rpm_get();
> +             *val = ctl->fan_speed;

                *val = rpm_get();

would do, and storing the value in ctl seems unnecessary / pointless.

Henry: OK, will remove structure silicom_fan_control_data.

> +             return 0;
> +     default:
> +             return -EOPNOTSUPP;
> +     }
> +}
> +
> +static int silicom_fan_control_read_temp(struct device *dev, u32 
> +attr, long *val) {
> +     struct silicom_fan_control_data *ctl = dev_get_drvdata(dev);
> +
> +     switch (attr) {
> +     case hwmon_temp_input:
> +             ctl->temp = temp_get();
> +             *val = ctl->temp;

Why not just
                *val = temp_get();
?

Henry: OK 

ctl is not really used except to store a value which is never read.
I don't see the point of doing that. Same for fan_speed.

Henry: OK, will remove this structure. 

> +             return 0;
> +     default:
> +             return -EOPNOTSUPP;
> +     }
> +}
> +
> +static umode_t silicom_fan_control_is_visible(const void *data,
> +                                       enum hwmon_sensor_types type,
> +                                       u32 attr, int channel) {
> +     switch (type) {
> +     case hwmon_fan:
> +             return silicom_fan_control_fan_is_visible(attr);
> +     case hwmon_temp:
> +             return silicom_fan_control_temp_is_visible(attr);
> +     default:
> +             return 0;
> +     }
> +}
> +
> +static int silicom_fan_control_read(struct device *dev, enum hwmon_sensor_types type,
> +                                 u32 attr, int channel, long *val) {
> +     switch (type) {
> +     case hwmon_fan:
> +             return silicom_fan_control_read_fan(dev, attr, val);
> +     case hwmon_temp:
> +             return silicom_fan_control_read_temp(dev, attr, val);
> +     default:
> +             return -EOPNOTSUPP;
> +     }
> +}
> +
> +static int silicom_fan_control_read_labels(struct device *dev, enum hwmon_sensor_types type,
> +                                        u32 attr, int channel, const 
> +char **str) {
> +     switch (type) {
> +     case hwmon_fan:
> +             *str = "Fan Speed (RPM)";

RPM is redundant. Fan speed is always measured in RPM.
This would result in output such as

Fan Speed (RPM):                  1166 RPM

which really doesn't make sense. Also, and that is true for both labels, the expected string is the location of the sensor (e.g., "CPU Fan", not something generic like "Fan Speed" or "Thermostat Sensor".

Henry: OK, will change to "Fan Speed".

> +             return 0;
> +     case hwmon_temp:
> +             *str = "Thermostat Sensor";
> +             return 0;
> +     default:
> +             return -EOPNOTSUPP;
> +     }
> +}
> +
> +static int silicom_fan_control_write(struct device *dev, enum hwmon_sensor_types type,
> +                                  u32 attr, int channel, long val) {
> +     return 0;
> +}

Unnecessary if there is no writeable attribute (and bad to claim that there was no error if the function was somehow called).

Henry: OK, will remove this function. 

> +
> +static const struct hwmon_ops silicom_fan_control_hwmon_ops = {
> +     .is_visible = silicom_fan_control_is_visible,
> +     .read = silicom_fan_control_read,
> +     .write = silicom_fan_control_write,
> +     .read_string = silicom_fan_control_read_labels, };
> +
> +static const struct hwmon_chip_info silicom_chip_info = {
> +     .ops = &silicom_fan_control_hwmon_ops,
> +     .info = silicom_fan_control_info, };
> +
> +static int __init silicom_platform_probe(struct platform_device 
> +*device) {
> +     int i, err;
> +     u8 magic, ver;
> +     struct silicom_fan_control_data *ctl;
> +     const char *name = "Silocom_Fan_Monitor";
> +     const char *dev_name = "Silicom_platform";
> +
> +     mec_io_base = 0x0800;
> +     mec_io_len = 8;
> +     if (!devm_request_region(&device->dev, mec_io_base, mec_io_len, "mec")) {
> +             dev_err(&device->dev, "couldn't reserve MEC io ports\n");
> +             return -EBUSY;
> +     }
> +
> +     /* Sanity check magic number read for EC */
> +     outb(0x00, MEC_ADDR);
> +     magic = inb(MEC_DATA(0));
> +     ver = inb(MEC_DATA(1));
> +     dev_dbg(&device->dev, "EC magic 0x%02x, version 0x%02x\n", 
> + magic, ver);
> +
> +     if (magic != SILICOM_MEC_MAGIC) {
> +             dev_err(&device->dev, "Bad EC magic 0x%02x!\n", magic);
> +             return -ENODEV;
> +     }
> +
> +     if (silicom_led_info) {

I don't understand the conditional. silicom_led_info is always set in silicom_platform_info_init(). The code makes it look like it is optional, but each instance of silicom_platform_info initializes it. That seems quite pointless to me.

Henry: The check will be removed.

> +             err = silicom_mc_leds_register(&device->dev, silicom_led_info);
> +             if (err) {
> +                     dev_err(&device->dev, "Failed to register LEDs\n");
> +                     return err;
> +             }
> +     }
> +
> +     if (silicom_gpiochip) {
> +             err = devm_gpiochip_add_data(&device->dev, silicom_gpiochip, silicom_gpio_channels);
> +             if (err) {
> +                     dev_err(&device->dev, "Failed to register gpiochip: %d\n", err);
> +                     return err;
> +             }
> +     }
> +
> +     ctl = devm_kzalloc(&device->dev, sizeof(*ctl), GFP_KERNEL);
> +     if (!ctl)
> +             return -ENOMEM;
> +
> +     ctl->hdev = devm_hwmon_device_register_with_info(&device->dev, name, ctl,
> +                             &silicom_chip_info, NULL);
> +
ctl->hdev is not used anywhere and thus pointless.

Henry: the defining structure of ctl will be removed. 

> +     my_dev_ctl.my_dev = root_device_register(dev_name);
> +     for (i = 0; i < ARRAY_SIZE(my_dev_attr); i++) {
> +             err = sysfs_create_file(&my_dev_ctl.my_dev->kobj, &my_dev_attr[i].attr);
> +             if (err) {
> +                     pr_debug("failed to create the foo file in /sys/devices/Silicom_platform\n");
> +                     break;
> +              > +    }
> +
> +     return err;
> +}
> +
> +static int __init silicom_platform_info_init(const struct 
> +dmi_system_id *id) {
> +     struct silicom_platform_info *info = id->driver_data;
> +
> +     dev_info(&silicom_platform_dev->dev, "Detected %s\n", 
> + id->ident);
> +
> +     mec_io_base = info->io_base;
> +     mec_io_len = info->io_len;
> +     silicom_led_info = info->led_info;
> +     silicom_gpio_channels = info->gpio_channels;
> +     silicom_gpiochip = info->gpiochip;
> +     if (silicom_gpiochip)
> +             silicom_gpiochip->ngpio = info->ngpio;
> +
> +     return 1;
> +}
> +
> +static const struct dmi_system_id silicom_dmi_ids[] __initconst = {
> +     {
> +             .callback = silicom_platform_info_init,
> +             .ident = "Silicom Cordoba (Generic)",
> +             .matches = {
> +                     DMI_MATCH(DMI_BOARD_VENDOR, "Silicom"),
> +                     DMI_MATCH(DMI_BOARD_NAME, "80300-0214-G"),
> +             },
> +             .driver_data = &silicom_generic_cordoba_info,
> +     },
> +     {
> +             .callback = silicom_platform_info_init,
> +             .ident = "Silicom Cordoba (Generic)",
> +             .matches = {
> +                     DMI_MATCH(DMI_BOARD_VENDOR, "Silicom"),
> +                     DMI_MATCH(DMI_BOARD_NAME, "80500-0214-G"),
> +             },
> +             .driver_data = &silicom_generic_cordoba_info,
> +     },
> +     {
> +              .callback = silicom_platform_info_init,
> +              .ident = "Silicom Cordoba (plat_0222)",
> +              .matches = {
> +                    DMI_MATCH(DMI_BOARD_VENDOR, "Silicom"),
> +                    DMI_MATCH(DMI_BOARD_NAME, "80300-0222-G"),
> +              },
> +             .driver_data = &silicom_plat_0222_cordoba_info,
> +     },
> +     { },
> +};
> +
> +static int __init silicom_platform_init(void) {
> +     struct device *dev;
> +     int err;
> +
> +     /* register a platform device to act as the parent for LEDS, etc. */
> +     silicom_platform_dev = platform_device_register_simple("silicom-platform", -1, NULL, 0);
> +     if (IS_ERR(silicom_platform_dev)) {
> +             err = PTR_ERR(silicom_platform_dev);
> +             pr_err("failed to register silicom-platform device: %d\n", err);
> +             goto silicom_init_register_err;
> +     }
> +     dev = &silicom_platform_dev->dev;
> +
> +     err = dmi_check_system(silicom_dmi_ids);
> +     if (err == 0) {
> +             dev_err(dev, "No DMI match for this platform\n");
> +             err = -ENODEV;
> +             goto silicom_init_probe_err;
> +     }
> +
> +     /* Directly probe the platform driver in init since this isn't a
> +      * hotpluggable device.  That means we don't need to register a driver
> +      * that needs to wait around in memory on the chance a matching device
> +      * would get added.  Instead run once in __init so that we can free all
> +      * those resources when the __init region is wiped
> +      */
> +     err = platform_driver_probe(&silicom_platform_driver, silicom_platform_probe);
> +     if (err) {
> +             dev_err(dev, "Failed to probe platform driver %d\n", err);
> +             goto silicom_init_probe_err;
> +     }
> +
> +     return 0;
> +
> +silicom_init_probe_err:
> +     if (silicom_platform_dev) {
> +             platform_device_unregister(silicom_platform_dev);
> +             silicom_platform_dev = NULL;
> +     }
> +     if (my_dev_ctl.my_dev) {
> +             root_device_unregister(my_dev_ctl.my_dev);
> +             my_dev_ctl.my_dev = NULL;
> +     }
> +
> +silicom_init_register_err:
> +     return err;
> +}
> +
> +static void __exit silicom_platform_exit(void) {
> +     int i;
> +
> +     if (silicom_platform_dev) {
> +             platform_device_unregister(silicom_platform_dev);
> +             platform_driver_unregister(&silicom_platform_driver);
> +     }
> +
> +     if (my_dev_ctl.my_dev) {
> +             for (i = 0; i < ARRAY_SIZE(my_dev_attr); i++)
> +                     sysfs_remove_file(&my_dev_ctl.my_dev->kobj, &my_dev_attr[i].attr);
> +             root_device_unregister(my_dev_ctl.my_dev);
> +     }
> +     mutex_destroy(&mec_io_mutex);
> +}
> +
> +module_init(silicom_platform_init);
> +module_exit(silicom_platform_exit);
> +
> +MODULE_LICENSE("GPL");
> +MODULE_AUTHOR("Henry Shi <henrys@silicom-usa.com>"); 
> +MODULE_DESCRIPTION("Platform driver for Silicom network appliances");
> +
> +MODULE_DEVICE_TABLE(dmi, silicom_dmi_ids);
> +
Christophe JAILLET July 25, 2023, 9:02 p.m. UTC | #4
Le 18/07/2023 à 18:01, Henry Shi a écrit :
> The Silicom platform (silicom-platform) Linux driver for Swisscom
> Business Box (Swisscom BB) as well as Cordoba family products is a
> software solution designed to facilitate the efficient management
> and control of devices through the integration of various Linux
> frameworks. This platform driver provides seamless support for
> device management via the Linux LED framework, GPIO framework,
> Hardware Monitoring (HWMON), and device attributes. The Silicom
> platform driver's compatibility with these Linux frameworks allows
> applications to access and control Cordoba family devices using
> existing software that is compatible with these frameworks. This
> compatibility simplifies the development process, reduces
> dependencies on proprietary solutions, and promotes
> interoperability with other Linux-based systems and software.
> 
> Signed-off-by: Henry Shi <henryshi2018@gmail.com>
> ---

[...]

> +static int __init silicom_mc_leds_register(struct device *dev,
> +					   const struct led_classdev_mc *mc_leds)
> +{
> +	struct led_classdev_mc *led;
> +	int i, err;
> +
> +	for (i = 0; mc_leds[i].led_cdev.name; i++) {
> +		/* allocate and copy data from the init constansts */
> +		led = devm_kzalloc(dev, sizeof(struct led_classdev_mc), GFP_KERNEL);

sizeof(*led) is shorter.
Mostly a matter of taste.

Maybe even devm_kmemdup()?

> +		if (IS_ERR_OR_NULL(led)) {

if (!led)
is enough.

> +			dev_err(dev, "Failed to alloc led_classdev_mc[%d]: %ld\n", i, PTR_ERR(led));

This kind of message is useless and should be removed (checkpatch should 
warn about it)

> +			return -ENOMEM;
> +		}
> +		memcpy(led, &mc_leds[i], sizeof(*led));
> +
> +		led->subled_info = devm_kzalloc(dev, led->num_colors * sizeof(struct mc_subled),
> +						GFP_KERNEL);

Maybe even devm_kmemdup()?

> +		if (IS_ERR_OR_NULL(led->subled_info)) {

if (!led->subled_info)
is enough.

> +			dev_err(dev, "Failed to alloc subled_info[%d]: %ld\n",
> +				i, PTR_ERR(led->subled_info));

This kind of message is useless and should be removed (checkpatch should 
warn about it)

> +			return -ENOMEM;
> +		}
> +		memcpy(led->subled_info, mc_leds[i].subled_info,
> +			led->num_colors * sizeof(struct mc_subled));
> +
> +		err = devm_led_classdev_multicolor_register(dev, led);
> +		if (err) {
> +			dev_err(dev, "Failed to register[%d]: %d\n", i, err);
> +			return err;
> +		}
> +	}
> +
> +	return 0;
> +}

[...]
Huibin Shi July 28, 2023, 12:59 p.m. UTC | #5
Christophe,

Thanks for the comments. See my comments below.

Updated patch will be sent out later after review comments from other reviewers are addressed. 

Henry
-----Original Message-----
From: Christophe JAILLET <christophe.jaillet@wanadoo.fr> 
Sent: Tuesday, July 25, 2023 5:03 PM
To: Henry Shi <henryshi2018@gmail.com>; hbshi69@hotmail.com; tglx@linutronix.de; mingo@redhat.com; bp@alien8.de; dave.hansen@linux.intel.com; x86@kernel.org; hpa@zytor.com; hdegoede@redhat.com; markgross@kernel.org; jdelvare@suse.com; linux@roeck-us.net; linux-kernel@vger.kernel.org; platform-driver-x86@vger.kernel.org; linux-hwmon@vger.kernel.org
Cc: hb_shi2003@yahoo.com; Huibin Shi <henrys@silicom-usa.com>; Wen Wang <wenw@silicom-usa.com>
Subject: Re: [PATCH] Add Silicom Platform Driver

Caution: This is an external email. Please take care when clicking links or opening attachments.


Le 18/07/2023 à 18:01, Henry Shi a écrit :
> The Silicom platform (silicom-platform) Linux driver for Swisscom 
> Business Box (Swisscom BB) as well as Cordoba family products is a 
> software solution designed to facilitate the efficient management and 
> control of devices through the integration of various Linux 
> frameworks. This platform driver provides seamless support for device 
> management via the Linux LED framework, GPIO framework, Hardware 
> Monitoring (HWMON), and device attributes. The Silicom platform 
> driver's compatibility with these Linux frameworks allows applications 
> to access and control Cordoba family devices using existing software 
> that is compatible with these frameworks. This compatibility 
> simplifies the development process, reduces dependencies on 
> proprietary solutions, and promotes interoperability with other 
> Linux-based systems and software.
>
> Signed-off-by: Henry Shi <henryshi2018@gmail.com>
> ---

[...]

> +static int __init silicom_mc_leds_register(struct device *dev,
> +                                        const struct led_classdev_mc 
> +*mc_leds) {
> +     struct led_classdev_mc *led;
> +     int i, err;
> +
> +     for (i = 0; mc_leds[i].led_cdev.name; i++) {
> +             /* allocate and copy data from the init constansts */
> +             led = devm_kzalloc(dev, sizeof(struct led_classdev_mc), 
> + GFP_KERNEL);

sizeof(*led) is shorter.
Mostly a matter of taste.

Maybe even devm_kmemdup()?

Henry: thanks. Devm_kmemdup() API requires additional argument that is not necessary of this driver. I prefer devm_kzalloc for now.

> +             if (IS_ERR_OR_NULL(led)) {

if (!led)
is enough.

Henry: OK, changed

> +                     dev_err(dev, "Failed to alloc 
> + led_classdev_mc[%d]: %ld\n", i, PTR_ERR(led));

This kind of message is useless and should be removed (checkpatch should warn about it)

Henry: OK, removed.

> +                     return -ENOMEM;
> +             }
> +             memcpy(led, &mc_leds[i], sizeof(*led));
> +
> +             led->subled_info = devm_kzalloc(dev, led->num_colors * sizeof(struct mc_subled),
> +                                             GFP_KERNEL);

Maybe even devm_kmemdup()?

> +             if (IS_ERR_OR_NULL(led->subled_info)) {

if (!led->subled_info)
is enough.

Henry: OK, changed.

> +                     dev_err(dev, "Failed to alloc subled_info[%d]: %ld\n",
> +                             i, PTR_ERR(led->subled_info));

This kind of message is useless and should be removed (checkpatch should warn about it)

Henry: OK, removed.

> +                     return -ENOMEM;
> +             }
> +             memcpy(led->subled_info, mc_leds[i].subled_info,
> +                     led->num_colors * sizeof(struct mc_subled));
> +
> +             err = devm_led_classdev_multicolor_register(dev, led);
> +             if (err) {
> +                     dev_err(dev, "Failed to register[%d]: %d\n", i, err);
> +                     return err;
> +             }
> +     }
> +
> +     return 0;
> +}

[...]
Guenter Roeck July 28, 2023, 2:28 p.m. UTC | #6
On 7/28/23 05:59, Huibin Shi wrote:
> Christophe,
> 
> Thanks for the comments. See my comments below.
> 
> Updated patch will be sent out later after review comments from other reviewers are addressed.
> 
> Henry
> -----Original Message-----
> From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
> Sent: Tuesday, July 25, 2023 5:03 PM
> To: Henry Shi <henryshi2018@gmail.com>; hbshi69@hotmail.com; tglx@linutronix.de; mingo@redhat.com; bp@alien8.de; dave.hansen@linux.intel.com; x86@kernel.org; hpa@zytor.com; hdegoede@redhat.com; markgross@kernel.org; jdelvare@suse.com; linux@roeck-us.net; linux-kernel@vger.kernel.org; platform-driver-x86@vger.kernel.org; linux-hwmon@vger.kernel.org
> Cc: hb_shi2003@yahoo.com; Huibin Shi <henrys@silicom-usa.com>; Wen Wang <wenw@silicom-usa.com>
> Subject: Re: [PATCH] Add Silicom Platform Driver
> 
> Caution: This is an external email. Please take care when clicking links or opening attachments.
> 
> 
> Le 18/07/2023 à 18:01, Henry Shi a écrit :
>> The Silicom platform (silicom-platform) Linux driver for Swisscom
>> Business Box (Swisscom BB) as well as Cordoba family products is a
>> software solution designed to facilitate the efficient management and
>> control of devices through the integration of various Linux
>> frameworks. This platform driver provides seamless support for device
>> management via the Linux LED framework, GPIO framework, Hardware
>> Monitoring (HWMON), and device attributes. The Silicom platform
>> driver's compatibility with these Linux frameworks allows applications
>> to access and control Cordoba family devices using existing software
>> that is compatible with these frameworks. This compatibility
>> simplifies the development process, reduces dependencies on
>> proprietary solutions, and promotes interoperability with other
>> Linux-based systems and software.
>>
>> Signed-off-by: Henry Shi <henryshi2018@gmail.com>
>> ---
> 
> [...]
> 
>> +static int __init silicom_mc_leds_register(struct device *dev,
>> +                                        const struct led_classdev_mc
>> +*mc_leds) {
>> +     struct led_classdev_mc *led;
>> +     int i, err;
>> +
>> +     for (i = 0; mc_leds[i].led_cdev.name; i++) {
>> +             /* allocate and copy data from the init constansts */
>> +             led = devm_kzalloc(dev, sizeof(struct led_classdev_mc),
>> + GFP_KERNEL);
> 
> sizeof(*led) is shorter.
> Mostly a matter of taste.
> 
> Maybe even devm_kmemdup()?
> 
> Henry: thanks. Devm_kmemdup() API requires additional argument that is not necessary of this driver. I prefer devm_kzalloc for now.
> 

I am curious: What would that additional argument be ?

Guenter
Christophe JAILLET July 28, 2023, 4:47 p.m. UTC | #7
Le 28/07/2023 à 14:59, Huibin Shi a écrit :
> Christophe,
> 
> Thanks for the comments. See my comments below.
> 
> Updated patch will be sent out later after review comments from other reviewers are addressed.
> 
> Henry
> -----Original Message-----
> From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
> Sent: Tuesday, July 25, 2023 5:03 PM
> To: Henry Shi <henryshi2018@gmail.com>; hbshi69@hotmail.com; tglx@linutronix.de; mingo@redhat.com; bp@alien8.de; dave.hansen@linux.intel.com; x86@kernel.org; hpa@zytor.com; hdegoede@redhat.com; markgross@kernel.org; jdelvare@suse.com; linux@roeck-us.net; linux-kernel@vger.kernel.org; platform-driver-x86@vger.kernel.org; linux-hwmon@vger.kernel.org
> Cc: hb_shi2003@yahoo.com; Huibin Shi <henrys@silicom-usa.com>; Wen Wang <wenw@silicom-usa.com>
> Subject: Re: [PATCH] Add Silicom Platform Driver
> 
> Caution: This is an external email. Please take care when clicking links or opening attachments.
> 
> 
> Le 18/07/2023 à 18:01, Henry Shi a écrit :
>> The Silicom platform (silicom-platform) Linux driver for Swisscom
>> Business Box (Swisscom BB) as well as Cordoba family products is a
>> software solution designed to facilitate the efficient management and
>> control of devices through the integration of various Linux
>> frameworks. This platform driver provides seamless support for device
>> management via the Linux LED framework, GPIO framework, Hardware
>> Monitoring (HWMON), and device attributes. The Silicom platform
>> driver's compatibility with these Linux frameworks allows applications
>> to access and control Cordoba family devices using existing software
>> that is compatible with these frameworks. This compatibility
>> simplifies the development process, reduces dependencies on
>> proprietary solutions, and promotes interoperability with other
>> Linux-based systems and software.
>>
>> Signed-off-by: Henry Shi <henryshi2018@gmail.com>
>> ---
> 
> [...]
> 
>> +static int __init silicom_mc_leds_register(struct device *dev,
>> +                                        const struct led_classdev_mc
>> +*mc_leds) {
>> +     struct led_classdev_mc *led;
>> +     int i, err;
>> +
>> +     for (i = 0; mc_leds[i].led_cdev.name; i++) {
>> +             /* allocate and copy data from the init constansts */
>> +             led = devm_kzalloc(dev, sizeof(struct led_classdev_mc),
>> + GFP_KERNEL);
> 
> sizeof(*led) is shorter.
> Mostly a matter of taste.
> 
> Maybe even devm_kmemdup()?
> 
> Henry: thanks. Devm_kmemdup() API requires additional argument that is not necessary of this driver. I prefer devm_kzalloc for now.

CJ: The only additionnal parameter I can think of are the one of 
memcpy() ...

> 
>> +             if (IS_ERR_OR_NULL(led)) {
> 
> if (!led)
> is enough.
> 
> Henry: OK, changed
> 
>> +                     dev_err(dev, "Failed to alloc
>> + led_classdev_mc[%d]: %ld\n", i, PTR_ERR(led));
> 
> This kind of message is useless and should be removed (checkpatch should warn about it)
> 
> Henry: OK, removed.
> 
>> +                     return -ENOMEM;
>> +             }
>> +             memcpy(led, &mc_leds[i], sizeof(*led));

... here.

devm_kzalloc() + this memcpy() could be done with only devm_kmemdup().

This is mostly a matter of taste.

>> +
>> +             led->subled_info = devm_kzalloc(dev, led->num_colors * sizeof(struct mc_subled),
>> +                                             GFP_KERNEL);
> 
> Maybe even devm_kmemdup()?

Same...

> 
>> +             if (IS_ERR_OR_NULL(led->subled_info)) {
> 
> if (!led->subled_info)
> is enough.
> 
> Henry: OK, changed.
> 
>> +                     dev_err(dev, "Failed to alloc subled_info[%d]: %ld\n",
>> +                             i, PTR_ERR(led->subled_info));
> 
> This kind of message is useless and should be removed (checkpatch should warn about it)
> 
> Henry: OK, removed.
> 
>> +                     return -ENOMEM;
>> +             }
>> +             memcpy(led->subled_info, mc_leds[i].subled_info,
>> +                     led->num_colors * sizeof(struct mc_subled));

... here.

CJ
Guenter Roeck July 28, 2023, 5:52 p.m. UTC | #8
On 7/28/23 09:47, Christophe JAILLET wrote:
> Le 28/07/2023 à 14:59, Huibin Shi a écrit :
>> Christophe,
>>
>> Thanks for the comments. See my comments below.
>>
>> Updated patch will be sent out later after review comments from other reviewers are addressed.
>>
>> Henry
>> -----Original Message-----
>> From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
>> Sent: Tuesday, July 25, 2023 5:03 PM
>> To: Henry Shi <henryshi2018@gmail.com>; hbshi69@hotmail.com; tglx@linutronix.de; mingo@redhat.com; bp@alien8.de; dave.hansen@linux.intel.com; x86@kernel.org; hpa@zytor.com; hdegoede@redhat.com; markgross@kernel.org; jdelvare@suse.com; linux@roeck-us.net; linux-kernel@vger.kernel.org; platform-driver-x86@vger.kernel.org; linux-hwmon@vger.kernel.org
>> Cc: hb_shi2003@yahoo.com; Huibin Shi <henrys@silicom-usa.com>; Wen Wang <wenw@silicom-usa.com>
>> Subject: Re: [PATCH] Add Silicom Platform Driver
>>
>> Caution: This is an external email. Please take care when clicking links or opening attachments.
>>
>>
>> Le 18/07/2023 à 18:01, Henry Shi a écrit :
>>> The Silicom platform (silicom-platform) Linux driver for Swisscom
>>> Business Box (Swisscom BB) as well as Cordoba family products is a
>>> software solution designed to facilitate the efficient management and
>>> control of devices through the integration of various Linux
>>> frameworks. This platform driver provides seamless support for device
>>> management via the Linux LED framework, GPIO framework, Hardware
>>> Monitoring (HWMON), and device attributes. The Silicom platform
>>> driver's compatibility with these Linux frameworks allows applications
>>> to access and control Cordoba family devices using existing software
>>> that is compatible with these frameworks. This compatibility
>>> simplifies the development process, reduces dependencies on
>>> proprietary solutions, and promotes interoperability with other
>>> Linux-based systems and software.
>>>
>>> Signed-off-by: Henry Shi <henryshi2018@gmail.com>
>>> ---
>>
>> [...]
>>
>>> +static int __init silicom_mc_leds_register(struct device *dev,
>>> +                                        const struct led_classdev_mc
>>> +*mc_leds) {
>>> +     struct led_classdev_mc *led;
>>> +     int i, err;
>>> +
>>> +     for (i = 0; mc_leds[i].led_cdev.name; i++) {
>>> +             /* allocate and copy data from the init constansts */
>>> +             led = devm_kzalloc(dev, sizeof(struct led_classdev_mc),
>>> + GFP_KERNEL);
>>
>> sizeof(*led) is shorter.
>> Mostly a matter of taste.
>>
>> Maybe even devm_kmemdup()?
>>
>> Henry: thanks. Devm_kmemdup() API requires additional argument that is not necessary of this driver. I prefer devm_kzalloc for now.
> 
> CJ: The only additionnal parameter I can think of are the one of memcpy() ...
> 
>>
>>> +             if (IS_ERR_OR_NULL(led)) {
>>
>> if (!led)
>> is enough.
>>
>> Henry: OK, changed
>>
>>> +                     dev_err(dev, "Failed to alloc
>>> + led_classdev_mc[%d]: %ld\n", i, PTR_ERR(led));
>>
>> This kind of message is useless and should be removed (checkpatch should warn about it)
>>
>> Henry: OK, removed.
>>
>>> +                     return -ENOMEM;
>>> +             }
>>> +             memcpy(led, &mc_leds[i], sizeof(*led));
> 
> ... here.
> 
> devm_kzalloc() + this memcpy() could be done with only devm_kmemdup().
> 
> This is mostly a matter of taste.
> 

I don't think that using (or not using) available API functions should
be a matter of taste, or the next step might be to re-implement memcpy().

Guenter
Huibin Shi July 28, 2023, 7:10 p.m. UTC | #9
Ilpo,

Thanks for the comments. See my comments below.

Updated patch will be sent out later after review comments from other reviewer are addressed. 

Henry
-----Original Message-----
From: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> 
Sent: Wednesday, July 19, 2023 8:13 AM
To: Henry Shi <henryshi2018@gmail.com>
Cc: hbshi69@hotmail.com; tglx@linutronix.de; mingo@redhat.com; bp@alien8.de; dave.hansen@linux.intel.com; x86@kernel.org; hpa@zytor.com; hdegoede@redhat.com; markgross@kernel.org; jdelvare@suse.com; linux@roeck-us.net; LKML <linux-kernel@vger.kernel.org>; platform-driver-x86@vger.kernel.org; linux-hwmon@vger.kernel.org; hb_shi2003@yahoo.com; Huibin Shi <henrys@silicom-usa.com>; Wen Wang <wenw@silicom-usa.com>
Subject: Re: [PATCH] Add Silicom Platform Driver

Caution: This is an external email. Please take care when clicking links or opening attachments.


On Tue, 18 Jul 2023, Henry Shi wrote:

> The Silicom platform (silicom-platform) Linux driver for Swisscom 
> Business Box (Swisscom BB) as well as Cordoba family products is a 
> software solution designed to facilitate the efficient management and 
> control of devices through the integration of various Linux 
> frameworks. This platform driver provides seamless support for device 
> management via the Linux LED framework, GPIO framework, Hardware 
> Monitoring (HWMON), and device attributes. The Silicom platform 
> driver's compatibility with these Linux frameworks allows applications 
> to access and control Cordoba family devices using existing software 
> that is compatible with these frameworks. This compatibility 
> simplifies the development process, reduces dependencies on 
> proprietary solutions, and promotes interoperability with other 
> Linux-based systems and software.
>
> Signed-off-by: Henry Shi <henryshi2018@gmail.com>
> ---
>  drivers/platform/x86/Kconfig            |   12 +
>  drivers/platform/x86/Makefile           |    1 +
>  drivers/platform/x86/silicom-platform.c | 1123 
> +++++++++++++++++++++++
>  3 files changed, 1136 insertions(+)
>  create mode 100644 drivers/platform/x86/silicom-platform.c
>
> diff --git a/drivers/platform/x86/Kconfig 
> b/drivers/platform/x86/Kconfig index 22052031c719..8c0988c2b4ce 100644
> --- a/drivers/platform/x86/Kconfig
> +++ b/drivers/platform/x86/Kconfig
> @@ -188,6 +188,18 @@ config ACER_WMI
>         If you have an ACPI-WMI compatible Acer/ Wistron laptop, say Y or M
>         here.
>
> +

Extra newline

Henry: OK, removed.

> +config SILICOM_PLATFORM
> +     tristate "Silicom Edge Networking device support"
> +     depends on DMI
> +     select LEDS_CLASS_MULTICOLOR
> +     select GPIOLIB
> +     help
> +       This option enables support for the LEDs/GPIO/etc downstream of the
> +       embedded controller on Silicom "Cordoba" hardware and derivatives.
> +
> +       If you have a Silicom network appliance, say Y or M here.
> +
>  source "drivers/platform/x86/amd/Kconfig"
>
>  config ADV_SWBUTTON
> diff --git a/drivers/platform/x86/Makefile 
> b/drivers/platform/x86/Makefile index 2cafe51ec4d8..f2f5743a9e54 
> 100644
> --- a/drivers/platform/x86/Makefile
> +++ b/drivers/platform/x86/Makefile
> @@ -113,6 +113,7 @@ obj-$(CONFIG_SERIAL_MULTI_INSTANTIATE)    += serial-multi-instantiate.o
>  obj-$(CONFIG_MLX_PLATFORM)           += mlx-platform.o
>  obj-$(CONFIG_TOUCHSCREEN_DMI)                += touchscreen_dmi.o
>  obj-$(CONFIG_WIRELESS_HOTKEY)                += wireless-hotkey.o
> +obj-$(CONFIG_SILICOM_PLATFORM)          += silicom-platform.o

Use tabs like the other lines.

Henry: OK

>  obj-$(CONFIG_X86_ANDROID_TABLETS)    += x86-android-tablets/
>
>  # Intel uncore drivers
> diff --git a/drivers/platform/x86/silicom-platform.c 
> b/drivers/platform/x86/silicom-platform.c
> new file mode 100644
> index 000000000000..90431f733682
> --- /dev/null
> +++ b/drivers/platform/x86/silicom-platform.c
> @@ -0,0 +1,1123 @@
> +// SPDX-License-Identifier: GPL-2.0+
> +//
> +// silicom-platform.c - Silicom MEC170x platform driver // // 
> +Copyright (C) 2023 Henry Shi <henrys@silicom-usa.com>
> +
> +#include <linux/dmi.h>
> +#include <linux/gpio/driver.h>
> +#include <linux/init.h>
> +#include <linux/ioport.h>
> +#include <linux/io.h>
> +#include <linux/kernel.h>
> +#include <linux/led-class-multicolor.h> #include <linux/module.h> 
> +#include <linux/hwmon.h> #include <linux/mutex.h> #include 
> +<linux/platform_device.h> #include <linux/string.h> #include 
> +<linux/thermal.h> #include <linux/kobject.h> #include <linux/sysfs.h>
> +
> +#define MEC_ADDR ((mec_io_base) + 0x02) #define MEC_DATA(byte) 
> +((mec_io_base) + 0x04 + (byte)) #define EC_ADDR_LSB MEC_ADDR #define 
> +EC_ADDR_MSB ((mec_io_base) + 0x03) #define SILICOM_MEC_MAGIC 0x5a

> +#define OFFSET_BIT_TO_CHANNEL(off, bit) ((((off) + 0x014) << 3) | 
> +(bit)) #define CHANNEL_TO_OFFSET(chan) (((chan) >> 3) - 0x14)

So you have two fields, offset and "bit", whatever that is. It would seem named define with GENMASK() for these two fields and FIELD_PREP() is appropriate here. And FIELD_GET() (and perhaps also FIELD_PREP()) used in the code below where appropriate.

0x14 should be named with a define.

> +#define CHANNEL_TO_BIT(chan) ((chan) & 0x07)

Unused.

Henry: OK, removed.

> +
> +static DEFINE_MUTEX(mec_io_mutex);
> +static int mec_io_base, mec_io_len;
> +
> +struct silicom_fan_control_data {
> +     struct   device *hdev;
> +     int      temp;
> +     int      fan_speed;
> +};
> +
> +static const struct hwmon_channel_info *silicom_fan_control_info[] = {
> +     HWMON_CHANNEL_INFO(fan, HWMON_F_INPUT | HWMON_F_LABEL),
> +     HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT | HWMON_T_LABEL),
> +     NULL
> +};
> +
> +struct silicom_device_control_data {
> +     struct   device *my_dev;
> +     int      efuse_status;
> +     int      uc_version;
> +     int      power_cycle;
> +};
> +static struct silicom_device_control_data my_dev_ctl;
> +
> +struct silicom_platform_info {
> +     int io_base;
> +     int io_len;
> +     struct led_classdev_mc *led_info;
> +     struct gpio_chip *gpiochip;
> +     u8 *gpio_channels;
> +     u16 ngpio;
> +};
> +
> +static const char * const plat_0222_gpio_names[] = {
> +     "AUTOM0_SFP_TX_FAULT",
> +     "SLOT2_LED_OUT",
> +     "SIM_M2_SLOT2_B_DET",
> +     "SIM_M2_SLOT2_A_DET",
> +     "SLOT1_LED_OUT",
> +     "SIM_M2_SLOT1_B_DET",
> +     "SIM_M2_SLOT1_A_DET",
> +     "SLOT0_LED_OUT",
> +     "WAN_SFP0_RX_LOS",
> +     "WAN_SFP0_PRSNT_N",
> +     "WAN_SFP0_TX_FAULT",
> +     "AUTOM1_SFP_RX_LOS",
> +     "AUTOM1_SFP_PRSNT_N",
> +     "AUTOM1_SFP_TX_FAULT",
> +     "AUTOM0_SFP_RX_LOS",
> +     "AUTOM0_SFP_PRSNT_N",
> +     "WAN_SFP1_RX_LOS",
> +     "WAN_SFP1_PRSNT_N",
> +     "WAN_SFP1_TX_FAULT",
> +     "SIM_M2_SLOT1_MUX_SEL",
> +     "W_DISABLE_M2_SLOT1_N",
> +     "W_DISABLE_MPCIE_SLOT0_N",
> +     "W_DISABLE_M2_SLOT0_N",
> +     "BT_COMMAND_MODE",
> +     "WAN_SFP1_TX_DISABLE",
> +     "WAN_SFP0_TX_DISABLE",
> +     "AUTOM1_SFP_TX_DISABLE",
> +     "AUTOM0_SFP_TX_DISABLE",
> +     "SIM_M2_SLOT2_MUX_SEL",
> +     "W_DISABLE_M2_SLOT2_N",
> +     "RST_CTL_M2_SLOT_1_N",
> +     "RST_CTL_M2_SLOT_2_N",
> +     "PM_USB_PWR_EN_BOT",
> +     "PM_USB_PWR_EN_TOP",
> +};
> +
> +static u8 plat_0222_gpio_channels[] = {
> +     OFFSET_BIT_TO_CHANNEL(0x00, 0),
> +     OFFSET_BIT_TO_CHANNEL(0x00, 1),
> +     OFFSET_BIT_TO_CHANNEL(0x00, 2),
> +     OFFSET_BIT_TO_CHANNEL(0x00, 3),
> +     OFFSET_BIT_TO_CHANNEL(0x00, 4),
> +     OFFSET_BIT_TO_CHANNEL(0x00, 5),
> +     OFFSET_BIT_TO_CHANNEL(0x00, 6),
> +     OFFSET_BIT_TO_CHANNEL(0x00, 7),
> +     OFFSET_BIT_TO_CHANNEL(0x01, 0),
> +     OFFSET_BIT_TO_CHANNEL(0x01, 1),
> +     OFFSET_BIT_TO_CHANNEL(0x01, 2),
> +     OFFSET_BIT_TO_CHANNEL(0x01, 3),
> +     OFFSET_BIT_TO_CHANNEL(0x01, 4),
> +     OFFSET_BIT_TO_CHANNEL(0x01, 5),
> +     OFFSET_BIT_TO_CHANNEL(0x01, 6),
> +     OFFSET_BIT_TO_CHANNEL(0x01, 7),
> +     OFFSET_BIT_TO_CHANNEL(0x02, 0),
> +     OFFSET_BIT_TO_CHANNEL(0x02, 1),
> +     OFFSET_BIT_TO_CHANNEL(0x02, 2),
> +     OFFSET_BIT_TO_CHANNEL(0x09, 0),
> +     OFFSET_BIT_TO_CHANNEL(0x09, 1),
> +     OFFSET_BIT_TO_CHANNEL(0x09, 2),
> +     OFFSET_BIT_TO_CHANNEL(0x09, 3),
> +     OFFSET_BIT_TO_CHANNEL(0x0a, 0),
> +     OFFSET_BIT_TO_CHANNEL(0x0a, 1),
> +     OFFSET_BIT_TO_CHANNEL(0x0a, 2),
> +     OFFSET_BIT_TO_CHANNEL(0x0a, 3),
> +     OFFSET_BIT_TO_CHANNEL(0x0a, 4),
> +     OFFSET_BIT_TO_CHANNEL(0x0a, 5),
> +     OFFSET_BIT_TO_CHANNEL(0x0a, 6),
> +     OFFSET_BIT_TO_CHANNEL(0x0b, 0),
> +     OFFSET_BIT_TO_CHANNEL(0x0b, 1),
> +     OFFSET_BIT_TO_CHANNEL(0x0b, 2),
> +     OFFSET_BIT_TO_CHANNEL(0x0b, 3),
> +};
> +
> +static int silicom_gpio_get_direction(struct gpio_chip *gc, unsigned 
> +int offset); static int silicom_gpio_direction_input(struct gpio_chip 
> +*gc, unsigned int offset); static int 
> +silicom_gpio_direction_output(struct gpio_chip *gc, unsigned int 
> +offset, int value); static int silicom_gpio_get(struct gpio_chip *gc, 
> +unsigned int offset); static void silicom_gpio_set(struct gpio_chip *gc, unsigned int offset, int value); static void silicom_mec_led_mc_brightness_set(struct led_classdev *led_cdev,
> +                                           enum led_brightness 
> +brightness); static enum led_brightness 
> +silicom_mec_led_mc_brightness_get(struct led_classdev *led_cdev);

Try to organize the code such that no forward declarations are necessary.

Henry: OK.

> +static struct platform_device *silicom_platform_dev; static struct 
> +led_classdev_mc *silicom_led_info __initdata; static struct gpio_chip 
> +*silicom_gpiochip __initdata; static u8 *silicom_gpio_channels 
> +__initdata; static struct gpio_chip silicom_gpio_chip = {
> +     .label = "silicom-gpio",
> +     .get_direction = silicom_gpio_get_direction,
> +     .direction_input = silicom_gpio_direction_input,
> +     .direction_output = silicom_gpio_direction_output,
> +     .get = silicom_gpio_get,
> +     .set = silicom_gpio_set,
> +     .base = -1,
> +     .ngpio = ARRAY_SIZE(plat_0222_gpio_channels),
> +     .names = plat_0222_gpio_names,
> +     /* We're using a mutex to protect the indirect access, so we can sleep if the lock blocks */
> +     .can_sleep = true,
> +};
> +
> +static struct mc_subled plat_0222_wan_mc_subled_info[] __initdata = {
> +     {
> +             .color_index = LED_COLOR_ID_WHITE,
> +             .brightness = 1,
> +             .intensity = 0,
> +             .channel = OFFSET_BIT_TO_CHANNEL(0x0c, 7),
> +     },
> +     {
> +             .color_index = LED_COLOR_ID_YELLOW,
> +             .brightness = 1,
> +             .intensity = 0,
> +             .channel = OFFSET_BIT_TO_CHANNEL(0x0c, 6),
> +     },
> +     {
> +             .color_index = LED_COLOR_ID_RED,
> +             .brightness = 1,
> +             .intensity = 0,
> +             .channel = OFFSET_BIT_TO_CHANNEL(0x0c, 5),
> +     },
> +};
> +
> +static struct mc_subled plat_0222_sys_mc_subled_info[] __initdata = {
> +     {
> +             .color_index = LED_COLOR_ID_WHITE,
> +             .brightness = 1,
> +             .intensity = 0,
> +             .channel = OFFSET_BIT_TO_CHANNEL(0x0c, 4),
> +     },
> +     {
> +             .color_index = LED_COLOR_ID_AMBER,
> +             .brightness = 1,
> +             .intensity = 0,
> +             .channel = OFFSET_BIT_TO_CHANNEL(0x0c, 3),
> +     },
> +     {
> +             .color_index = LED_COLOR_ID_RED,
> +             .brightness = 1,
> +             .intensity = 0,
> +             .channel = OFFSET_BIT_TO_CHANNEL(0x0c, 2),
> +     },
> +};
> +
> +static struct mc_subled plat_0222_stat1_mc_subled_info[] __initdata = {
> +     {
> +             .color_index = LED_COLOR_ID_RED,
> +             .brightness = 1,
> +             .intensity = 0,
> +             .channel = OFFSET_BIT_TO_CHANNEL(0x0c, 1),
> +     },
> +     {
> +             .color_index = LED_COLOR_ID_GREEN,
> +             .brightness = 1,
> +             .intensity = 0,
> +             .channel = OFFSET_BIT_TO_CHANNEL(0x0c, 0),
> +     },
> +     {
> +             .color_index = LED_COLOR_ID_BLUE,
> +             .brightness = 1,
> +             .intensity = 0,
> +             .channel = OFFSET_BIT_TO_CHANNEL(0x0d, 7),
> +     },
> +     {
> +             .color_index = LED_COLOR_ID_YELLOW,
> +             .brightness = 1,
> +             .intensity = 0,
> +             .channel = OFFSET_BIT_TO_CHANNEL(0x0d, 6),
> +     },
> +};
> +
> +static struct mc_subled plat_0222_stat2_mc_subled_info[] __initdata = {
> +     {
> +             .color_index = LED_COLOR_ID_RED,
> +             .brightness = 1,
> +             .intensity = 0,
> +             .channel = OFFSET_BIT_TO_CHANNEL(0x0d, 5),
> +     },
> +     {
> +             .color_index = LED_COLOR_ID_GREEN,
> +             .brightness = 1,
> +             .intensity = 0,
> +             .channel = OFFSET_BIT_TO_CHANNEL(0x0d, 4),
> +     },
> +     {
> +             .color_index = LED_COLOR_ID_BLUE,
> +             .brightness = 1,
> +             .intensity = 0,
> +             .channel = OFFSET_BIT_TO_CHANNEL(0x0d, 3),
> +     },
> +     {
> +             .color_index = LED_COLOR_ID_YELLOW,
> +             .brightness = 1,
> +             .intensity = 0,
> +             .channel = OFFSET_BIT_TO_CHANNEL(0x0d, 2),
> +     },
> +};
> +
> +static struct mc_subled plat_0222_stat3_mc_subled_info[] __initdata = {
> +     {
> +             .color_index = LED_COLOR_ID_RED,
> +             .brightness = 1,
> +             .intensity = 0,
> +             .channel = OFFSET_BIT_TO_CHANNEL(0x0d, 1),
> +     },
> +     {
> +             .color_index = LED_COLOR_ID_GREEN,
> +             .brightness = 1,
> +             .intensity = 0,
> +             .channel = OFFSET_BIT_TO_CHANNEL(0x0d, 0),
> +     },
> +     {
> +             .color_index = LED_COLOR_ID_BLUE,
> +             .brightness = 1,
> +             .intensity = 0,
> +             .channel = OFFSET_BIT_TO_CHANNEL(0x0e, 1),
> +     },
> +     {
> +             .color_index = LED_COLOR_ID_YELLOW,
> +             .brightness = 1,
> +             .intensity = 0,
> +             .channel = OFFSET_BIT_TO_CHANNEL(0x0e, 0),
> +     },
> +};
> +
> +static struct led_classdev_mc plat_0222_mc_led_info[] __initdata = {
> +     {
> +             .led_cdev = {
> +                     .name = "multicolor:wan",
> +                     .brightness = 0,
> +                     .max_brightness = 1,
> +                     .brightness_set = silicom_mec_led_mc_brightness_set,
> +                     .brightness_get = silicom_mec_led_mc_brightness_get,
> +             },
> +             .num_colors = ARRAY_SIZE(plat_0222_wan_mc_subled_info),
> +             .subled_info = plat_0222_wan_mc_subled_info,
> +     },
> +     {
> +             .led_cdev = {
> +                     .name = "multicolor:sys",
> +                     .brightness = 0,
> +                     .max_brightness = 1,
> +                     .brightness_set = silicom_mec_led_mc_brightness_set,
> +                     .brightness_get = silicom_mec_led_mc_brightness_get,
> +             },
> +             .num_colors = ARRAY_SIZE(plat_0222_sys_mc_subled_info),
> +             .subled_info = plat_0222_sys_mc_subled_info,
> +     },
> +     {
> +             .led_cdev = {
> +                     .name = "multicolor:stat1",
> +                     .brightness = 0,
> +                     .max_brightness = 1,
> +                     .brightness_set = silicom_mec_led_mc_brightness_set,
> +                     .brightness_get = silicom_mec_led_mc_brightness_get,
> +             },
> +             .num_colors = ARRAY_SIZE(plat_0222_stat1_mc_subled_info),
> +             .subled_info = plat_0222_stat1_mc_subled_info,
> +     },
> +     {
> +             .led_cdev = {
> +                     .name = "multicolor:stat2",
> +                     .brightness = 0,
> +                     .max_brightness = 1,
> +                     .brightness_set = silicom_mec_led_mc_brightness_set,
> +                     .brightness_get = silicom_mec_led_mc_brightness_get,
> +             },
> +             .num_colors = ARRAY_SIZE(plat_0222_stat2_mc_subled_info),
> +             .subled_info = plat_0222_stat2_mc_subled_info,
> +     },
> +     {
> +             .led_cdev = {
> +                     .name = "multicolor:stat3",
> +                     .brightness = 0,
> +                     .max_brightness = 1,
> +                     .brightness_set = silicom_mec_led_mc_brightness_set,
> +                     .brightness_get = silicom_mec_led_mc_brightness_get,
> +             },
> +             .num_colors = ARRAY_SIZE(plat_0222_stat3_mc_subled_info),
> +             .subled_info = plat_0222_stat3_mc_subled_info,
> +     },
> +     { },
> +};
> +
> +static struct silicom_platform_info silicom_plat_0222_cordoba_info __initdata = {
> +     .io_base = 0x800,
> +     .io_len = 8,
> +     .led_info = plat_0222_mc_led_info,
> +     .gpiochip = &silicom_gpio_chip,
> +     .gpio_channels = plat_0222_gpio_channels,
> +     /* The original generic cordoba does not have the last 4 outputs of the plat_0222 BB variant,
> +      * the rest are the same, so use the same longer list, but ignore the last entries here
> +      */
> +     .ngpio = ARRAY_SIZE(plat_0222_gpio_channels),
> +
> +};
> +
> +static struct mc_subled cordoba_fp_left_mc_subled_info[] __initdata = {
> +     {
> +             .color_index = LED_COLOR_ID_RED,
> +             .brightness = 1,
> +             .intensity = 0,
> +             .channel = OFFSET_BIT_TO_CHANNEL(0x08, 6),
> +     },
> +     {
> +             .color_index = LED_COLOR_ID_GREEN,
> +             .brightness = 1,
> +             .intensity = 0,
> +             .channel = OFFSET_BIT_TO_CHANNEL(0x08, 5),
> +     },
> +     {
> +             .color_index = LED_COLOR_ID_BLUE,
> +             .brightness = 1,
> +             .intensity = 0,
> +             .channel = OFFSET_BIT_TO_CHANNEL(0x09, 7),
> +     },
> +     {
> +             .color_index = LED_COLOR_ID_AMBER,
> +             .brightness = 1,
> +             .intensity = 0,
> +             .channel = OFFSET_BIT_TO_CHANNEL(0x09, 4),
> +     },
> +};
> +
> +static struct mc_subled cordoba_fp_center_mc_subled_info[] __initdata = {
> +     {
> +             .color_index = LED_COLOR_ID_RED,
> +             .brightness = 1,
> +             .intensity = 0,
> +             .channel = OFFSET_BIT_TO_CHANNEL(0x08, 7),
> +     },
> +     {
> +             .color_index = LED_COLOR_ID_GREEN,
> +             .brightness = 1,
> +             .intensity = 0,
> +             .channel = OFFSET_BIT_TO_CHANNEL(0x08, 4),
> +     },
> +     {
> +             .color_index = LED_COLOR_ID_BLUE,
> +             .brightness = 1,
> +             .intensity = 0,
> +             .channel = OFFSET_BIT_TO_CHANNEL(0x08, 3),
> +     },
> +     {
> +             .color_index = LED_COLOR_ID_AMBER,
> +             .brightness = 1,
> +             .intensity = 0,
> +             .channel = OFFSET_BIT_TO_CHANNEL(0x09, 6),
> +     },
> +};
> +
> +static struct mc_subled cordoba_fp_right_mc_subled_info[] __initdata = {
> +     {
> +             .color_index = LED_COLOR_ID_RED,
> +             .brightness = 1,
> +             .intensity = 0,
> +             .channel = OFFSET_BIT_TO_CHANNEL(0x08, 2),
> +     },
> +     {
> +             .color_index = LED_COLOR_ID_GREEN,
> +             .brightness = 1,
> +             .intensity = 0,
> +             .channel = OFFSET_BIT_TO_CHANNEL(0x08, 1),
> +     },
> +     {
> +             .color_index = LED_COLOR_ID_BLUE,
> +             .brightness = 1,
> +             .intensity = 0,
> +             .channel = OFFSET_BIT_TO_CHANNEL(0x08, 0),
> +     },
> +     {
> +             .color_index = LED_COLOR_ID_AMBER,
> +             .brightness = 1,
> +             .intensity = 0,
> +             .channel = OFFSET_BIT_TO_CHANNEL(0x09, 5),
> +     },
> +};
> +
> +static struct led_classdev_mc cordoba_mc_led_info[] __initdata = {
> +     {
> +             .led_cdev = {
> +                     .name = "multicolor:fp_left",
> +                     .brightness = 0,
> +                     .max_brightness = 1,
> +                     .brightness_set = silicom_mec_led_mc_brightness_set,
> +                     .brightness_get = silicom_mec_led_mc_brightness_get,
> +             },
> +             .num_colors = ARRAY_SIZE(cordoba_fp_left_mc_subled_info),
> +             .subled_info = cordoba_fp_left_mc_subled_info,
> +     },
> +     {
> +             .led_cdev = {
> +                     .name = "multicolor:fp_center",
> +                     .brightness = 0,
> +                     .max_brightness = 1,
> +                     .brightness_set = silicom_mec_led_mc_brightness_set,
> +                     .brightness_get = silicom_mec_led_mc_brightness_get,
> +             },
> +             .num_colors = ARRAY_SIZE(cordoba_fp_center_mc_subled_info),
> +             .subled_info = cordoba_fp_center_mc_subled_info,
> +     },
> +     {
> +             .led_cdev = {
> +                     .name = "multicolor:fp_right",
> +                     .brightness = 0,
> +                     .max_brightness = 1,
> +                     .brightness_set = silicom_mec_led_mc_brightness_set,
> +                     .brightness_get = silicom_mec_led_mc_brightness_get,
> +             },
> +             .num_colors = ARRAY_SIZE(cordoba_fp_right_mc_subled_info),
> +             .subled_info = cordoba_fp_right_mc_subled_info,
> +     },
> +     { },
> +};
> +
> +static struct silicom_platform_info silicom_generic_cordoba_info __initdata = {
> +     .io_base = 0x800,
> +     .io_len = 8,
> +     .led_info = cordoba_mc_led_info,
> +     .gpiochip = &silicom_gpio_chip,
> +     .gpio_channels = plat_0222_gpio_channels,
> +     .ngpio = ARRAY_SIZE(plat_0222_gpio_channels),
> +};
> +
> +static struct platform_driver silicom_platform_driver = {
> +     .driver = {
> +             .name = "silicom-platform",
> +     },
> +};
> +
> +void lock_io_modules(void)
> +{
> +     mutex_lock(&mec_io_mutex);
> +}
> +EXPORT_SYMBOL(lock_io_modules);
> +
> +void unlock_io_modules(void)
> +{
> +     mutex_unlock(&mec_io_mutex);
> +}
> +EXPORT_SYMBOL(unlock_io_modules);
> +
> +static ssize_t efuse_status_show(struct device *dev, struct device_attribute *attr,
> +                   char *buf)
> +{
> +     u32 reg;
> +     u32 bank = 0;
> +     u32 offset = 0x28;

Why is this not a named define?

No need for bank & offset variables.

Henry: OK, added new named define and removed these three variables.

> +     u32 byte_pos = 0;
> +
> +     mutex_lock(&mec_io_mutex);
> +     /* Select memory region */
> +     outb(bank, EC_ADDR_MSB);
> +     outb(offset, EC_ADDR_LSB);
> +
> +     /* Get current date from the address */
> +     reg = inl(MEC_DATA(byte_pos));
> +     mutex_unlock(&mec_io_mutex);
> +
> +     my_dev_ctl.efuse_status = reg & 0x1;
> +
> +     return sprintf(buf, "%d\n", my_dev_ctl.efuse_status); }
> +
> +static ssize_t uc_version_show(struct device *dev,
> +                            struct device_attribute *attr,
> +                            char *buf) {
> +     u32 reg;
> +     u32 bank = 0;
> +     u32 offset = 0x0;

Ditto.

Henry: OK, added new named define and removed these three variables.

> +     u32 byte_pos = 0;
> +     int uc_version;
> +
> +     mutex_lock(&mec_io_mutex);
> +     outb(bank, EC_ADDR_MSB);
> +     outb(offset, EC_ADDR_LSB);
> +
> +     reg = inl(MEC_DATA(byte_pos));
> +     mutex_unlock(&mec_io_mutex);
> +
> +     uc_version = (reg >> 8) & 0xFF;

Define a named mask with GENMASK() and use FIELD_GET().

Henry: OK, changed code to use these two macro.

> +     if (uc_version >= 64 && uc_version < 128) {
> +             uc_version = uc_version - 64;

Testing for a bit (or two bit field inside the version actually considering the other if too) in version and then handcrafting & ~THATBIT?

Henry: OK, good point. Code was changed as suggested.

> +             if (uc_version < 10)
> +                     uc_version = 100 + uc_version;
> +             else
> +                     uc_version = 100 + 10 * (uc_version / 10) + 
> + uc_version % 10;

Why is this if necessary? Doesn't the latter yield the same value as the first one when uc_version < 10?

Henry: good point. Actually, the purpose of initial code is for uc version to return 1.x.y or 2.x.y, which is not an integer. I have changed the code to remove if check. 

> +     } else if (uc_version >= 128 && uc_version < 192) {
> +             uc_version = uc_version - 128;
> +             if (uc_version < 10)
> +                     uc_version = 200 + uc_version;
> +             else
> +                     uc_version = 200 + 10 * (uc_version / 10) + 
> + uc_version % 10;

Similar comments to this block.

Henry: good point. Actually, the purpose of initial code is for uc version to return 1.x.y or 2.x.y, which is not an integer. I have changed the code to remove if check.

> +     }
> +     my_dev_ctl.uc_version = uc_version;
> +     return sprintf(buf, "%d\n", my_dev_ctl.uc_version); }
> +
> +static ssize_t power_cycle_show(struct device *dev,
> +                             struct device_attribute *attr,
> +                             char *buf) {
> +     return sprintf(buf, "%d\n", my_dev_ctl.power_cycle); }
> +
> +static void powercycle_uc(void)
> +{
> +     u32 bank = 0;
> +     u32 offset = 0x24;

Named define, no need for these variables.

Henry: OK, added new named define and removed these three variables.

> +     u32 byte_pos = 0;
> +
> +     mutex_lock(&mec_io_mutex);
> +     /* Select memory region */
> +     outb(bank, EC_ADDR_MSB);
> +     outb(offset, EC_ADDR_LSB);
> +
> +     /* Set to 1 for current date from the address */
> +     outb(1, MEC_DATA(byte_pos));

Hmm, this is really misleading. MEC_DATA() seems to calculate _an offset_, not data? Name things accordingly.

Henry: OK, changed the defined to  "#define MEC_DATA(offset) ((mec_io_base) + 0x04 + (offset))"

> +     mutex_unlock(&mec_io_mutex);
> +}
> +
> +static ssize_t power_cycle_store(struct device *dev, struct device_attribute *attr,
> +                              const char *buf, size_t count) {
> +     if (sscanf(buf, "%du", &my_dev_ctl.power_cycle) != 1) {
> +             dev_err(dev, "Failed to read power_cycle\n");
> +             return -EINVAL;
> +     }
> +     if (my_dev_ctl.power_cycle > 0)
> +             powercycle_uc();
> +
> +     return count;
> +}
> +
> +static struct device_attribute my_dev_attr[] = {
> +     {
> +             .attr = {.name = "efuse_status", .mode = 0644},
> +             .show = efuse_status_show,
> +             .store = NULL
> +     },
> +     {
> +             .attr = {.name = "uc_version", .mode = 0644},
> +             .show = uc_version_show,
> +             .store = NULL
> +     },
> +     {
> +             .attr = {.name = "power_cycle", .mode = 0644},
> +             .show = power_cycle_show,
> +             .store = power_cycle_store
> +     },
> +};
> +
> +static int silicom_gpio_get_direction(struct gpio_chip *gc, unsigned 
> +int offset) {
> +     u8 *channels = gpiochip_get_data(gc);
> +
> +     /* Input registers have offsets between [0x00, 0x07] */
> +     if (CHANNEL_TO_OFFSET(channels[offset]) < 0x08)
> +             return GPIO_LINE_DIRECTION_IN;
> +
> +     return GPIO_LINE_DIRECTION_OUT;
> +}
> +
> +static int silicom_gpio_direction_input(struct gpio_chip *gc, 
> +unsigned int offset) {
> +     int direction = silicom_gpio_get_direction(gc, offset);
> +
> +     return direction == GPIO_LINE_DIRECTION_IN ? 0 : -EINVAL; }
> +
> +static void silicom_gpio_set(struct gpio_chip *gc, unsigned int 
> +offset, int value) {
> +     u8 *channels = gpiochip_get_data(gc);
> +     int direction = silicom_gpio_get_direction(gc, offset);
> +     int channel = channels[offset];
> +     u8 reg;
> +
> +     if (direction == GPIO_LINE_DIRECTION_IN)
> +             return;
> +
> +     mutex_lock(&mec_io_mutex);
> +     /* Get the dword offset from the channel */
> +     outb((channel >> 3) & 0xfc, MEC_ADDR);
> +
> +     /* Get the current register */
> +     reg = inb(MEC_DATA((channel >> 3) & 0x03));
> +     if (value == 0)
> +             reg &= ~(1 << (channel & 0x7));
> +     else if (value > 0)
> +             reg |= 1 << (channel & 0x7);
> +     else
> +             pr_err("Invalid GPIO value: %d\n", value);
> +     outb(reg, MEC_DATA((channel >> 3) & 0x03));
> +     mutex_unlock(&mec_io_mutex);
> +}
> +
> +static int silicom_gpio_direction_output(struct gpio_chip *gc, 
> +unsigned int offset, int value) {
> +     int direction = silicom_gpio_get_direction(gc, offset);
> +
> +     if (direction == GPIO_LINE_DIRECTION_IN)
> +             return -EINVAL;
> +
> +     silicom_gpio_set(gc, offset, value);
> +
> +     return 0;
> +}
> +
> +static int silicom_gpio_get(struct gpio_chip *gc, unsigned int 
> +offset) {
> +     u8 *channels = gpiochip_get_data(gc);
> +     int channel = channels[offset];
> +     u8 reg;
> +
> +     mutex_lock(&mec_io_mutex);
> +     /* Get the dword offset from the channel */
> +     outb((channel >> 3) & 0xfc, MEC_ADDR);
> +
> +     /* Get the current register */
> +     reg = inb(MEC_DATA((channel >> 3) & 0x03));
> +     mutex_unlock(&mec_io_mutex);
> +
> +     return (reg >> (channel & 0x7)) & 0x01; }
> +
> +static int __init silicom_mc_leds_register(struct device *dev,
> +                                        const struct led_classdev_mc 
> +*mc_leds) {
> +     struct led_classdev_mc *led;
> +     int i, err;
> +
> +     for (i = 0; mc_leds[i].led_cdev.name; i++) {
> +             /* allocate and copy data from the init constansts */

There's a typo in the constansts but the code seems obvious enough to not need a comment at all.

Henry: OK, removed the comment line.

> +             led = devm_kzalloc(dev, sizeof(struct led_classdev_mc), GFP_KERNEL);
> +             if (IS_ERR_OR_NULL(led)) {
> +                     dev_err(dev, "Failed to alloc led_classdev_mc[%d]: %ld\n", i, PTR_ERR(led));
> +                     return -ENOMEM;
> +             }
> +             memcpy(led, &mc_leds[i], sizeof(*led));
> +
> +             led->subled_info = devm_kzalloc(dev, led->num_colors * 
> + sizeof(struct mc_subled),

array_size() from linux/overflow.h

Henry: OK, changed to arary_size()

> +                                             GFP_KERNEL);
> +             if (IS_ERR_OR_NULL(led->subled_info)) {
> +                     dev_err(dev, "Failed to alloc subled_info[%d]: %ld\n",
> +                             i, PTR_ERR(led->subled_info));
> +                     return -ENOMEM;
> +             }
> +             memcpy(led->subled_info, mc_leds[i].subled_info,
> +                     led->num_colors * sizeof(struct mc_subled));

array_size()

Henry: OK, changed to arary_size()

Although a local variable could be used to hold it as it's used for alloc and this line.

Henry: Good point, allocated a local variable. 

> +
> +             err = devm_led_classdev_multicolor_register(dev, led);
> +             if (err) {
> +                     dev_err(dev, "Failed to register[%d]: %d\n", i, err);
> +                     return err;
> +             }
> +     }
> +
> +     return 0;
> +}
> +
> +static void silicom_mec_led_set(int channel, int on) {
> +     u8 reg;
> +
> +     mutex_lock(&mec_io_mutex);
> +     /* Get the dword offset from the channel */
> +     outb((channel >> 3) & 0xfc, MEC_ADDR);
> +     /* Get the current LED settings */
> +     reg = inb(MEC_DATA((channel >> 3) & 0x03));
> +
> +     /* Outputs are active low, so clear the bit for on, or set it for off */
> +     if (on)
> +             reg &= ~(1 << (channel & 0x7));
> +     else
> +             reg |= 1 << (channel & 0x7);
> +
> +     /* Write back the updated register */
> +     outb(reg, MEC_DATA((channel >> 3) & 0x03));
> +
> +     mutex_unlock(&mec_io_mutex);

There's an identical code block in silicom_gpio_set(). Why not simply call this from silicom_gpio_set()?

Henry: these two block of date are different: silicom_mec_led_set(xxx, int on), argument on, when on is 1, it means turn on LED; 0 means turn off LED. For  silicom_gpio_set(), the argument value, which is really the 0 or 1 bit value that passed to reg. 

> +}
> +
> +static void silicom_mec_led_mc_brightness_set(struct led_classdev *led_cdev,
> +                                           enum led_brightness 
> +brightness) {
> +     struct led_classdev_mc *mc_cdev = lcdev_to_mccdev(led_cdev);
> +     int i;
> +
> +     led_mc_calc_color_components(mc_cdev, brightness);
> +
> +     for (i = 0; i < mc_cdev->num_colors; i++) {
> +             silicom_mec_led_set(mc_cdev->subled_info[i].channel,
> +                                 mc_cdev->subled_info[i].brightness);
> +     }
> +}
> +
> +static enum led_brightness silicom_mec_led_get(int channel) {
> +     u8 reg;
> +
> +     mutex_lock(&mec_io_mutex);
> +     /* Get the dword offset of the register for this LED from the channel */
> +     outb((channel >> 3) & 0xfc, MEC_ADDR);
> +     /* Get the current LED settings */
> +     reg = inb(MEC_DATA((channel >> 3) & 0x03));
> +     mutex_unlock(&mec_io_mutex);
> +
> +     /* Outputs are active low */
> +     return reg & (1 << (channel & 0x7)) ? LED_OFF : LED_ON;

Looks identical to a part of silicom_gpio_get(). Perhaps it should call this function??

Henry: some of the code block of these two functions are similar. But function return types are different. Gpio has status of 0 or 1, but LED has status of LED_OFF and LED_ON.

> +}
> +
> +static enum led_brightness silicom_mec_led_mc_brightness_get(struct 
> +led_classdev *led_cdev) {
> +     struct led_classdev_mc *mc_cdev = lcdev_to_mccdev(led_cdev);
> +     enum led_brightness brightness = LED_OFF;
> +     int i;
> +
> +     for (i = 0; i < mc_cdev->num_colors; i++) {
> +             mc_cdev->subled_info[i].brightness =
> +                     
> + silicom_mec_led_get(mc_cdev->subled_info[i].channel);
> +
> +             /* Mark the overall brightness as LED_ON if any of the subleds are on */
> +             if (mc_cdev->subled_info[i].brightness != LED_OFF)
> +                     brightness = LED_ON;
> +     }
> +
> +     return brightness;
> +}
> +
> +
> +static u32 rpm_get(void)
> +{
> +     u32 reg;
> +     u32 bank = 0;
> +     u32 offset = 0xc;

Named with a define. Remove unnecessary local vars.

Henry: OK, added new named define and removed these three variables.

> +     u32 byte_pos = 0;
> +
> +     mutex_lock(&mec_io_mutex);
> +     /* Select memory region */
> +     outb(bank, EC_ADDR_MSB);
> +     outb(offset, EC_ADDR_LSB);
> +     /* Get current date from the address */
> +     reg = inw(MEC_DATA(byte_pos));
> +     mutex_unlock(&mec_io_mutex);
> +
> +     return reg;
> +}
> +
> +static u32 temp_get(void)
> +{
> +     u32 reg;
> +     u32 bank = 0;
> +     u32 offset = 0xc;
> +     u32 byte_pos = 0;

Ditto.

Henry: OK, added new named define and removed these three variables.

> +     mutex_lock(&mec_io_mutex);
> +     /* Select memory region */
> +     outb(bank, EC_ADDR_MSB);
> +     outb(offset, EC_ADDR_LSB);
> +     /* Get current date from the address */
> +     reg = inl(MEC_DATA(byte_pos));
> +     mutex_unlock(&mec_io_mutex);
> +
> +     return (reg >> 16) / 10;

Should that >> 16 do a FIELD_GET() for a named field, I suspect it should?

> +}
> +
> +static umode_t silicom_fan_control_fan_is_visible(const u32 attr) {
> +     switch (attr) {
> +     case hwmon_fan_input:
> +     case hwmon_fan_label:
> +             return 0444;
> +     default:
> +             return 0;
> +     }
> +}
> +
> +static umode_t silicom_fan_control_temp_is_visible(const u32 attr) {
> +     switch (attr) {
> +     case hwmon_temp_input:
> +     case hwmon_temp_label:
> +             return 0444;
> +     default:
> +             return 0;
> +     }
> +}
> +
> +static int silicom_fan_control_read_fan(struct device *dev, u32 attr, 
> +long *val) {
> +     struct silicom_fan_control_data *ctl = dev_get_drvdata(dev);
> +
> +     switch (attr) {
> +     case hwmon_fan_input:
> +             ctl->fan_speed = rpm_get();
> +             *val = ctl->fan_speed;
> +             return 0;
> +     default:
> +             return -EOPNOTSUPP;
> +     }
> +}
> +
> +static int silicom_fan_control_read_temp(struct device *dev, u32 
> +attr, long *val) {
> +     struct silicom_fan_control_data *ctl = dev_get_drvdata(dev);
> +
> +     switch (attr) {
> +     case hwmon_temp_input:
> +             ctl->temp = temp_get();
> +             *val = ctl->temp;
> +             return 0;
> +     default:
> +             return -EOPNOTSUPP;
> +     }
> +}
> +
> +static umode_t silicom_fan_control_is_visible(const void *data,
> +                                       enum hwmon_sensor_types type,
> +                                       u32 attr, int channel) {
> +     switch (type) {
> +     case hwmon_fan:
> +             return silicom_fan_control_fan_is_visible(attr);
> +     case hwmon_temp:
> +             return silicom_fan_control_temp_is_visible(attr);
> +     default:
> +             return 0;
> +     }
> +}
> +
> +static int silicom_fan_control_read(struct device *dev, enum hwmon_sensor_types type,
> +                                 u32 attr, int channel, long *val) {
> +     switch (type) {
> +     case hwmon_fan:
> +             return silicom_fan_control_read_fan(dev, attr, val);
> +     case hwmon_temp:
> +             return silicom_fan_control_read_temp(dev, attr, val);
> +     default:
> +             return -EOPNOTSUPP;
> +     }
> +}
> +
> +static int silicom_fan_control_read_labels(struct device *dev, enum hwmon_sensor_types type,
> +                                        u32 attr, int channel, const 
> +char **str) {
> +     switch (type) {
> +     case hwmon_fan:
> +             *str = "Fan Speed (RPM)";
> +             return 0;
> +     case hwmon_temp:
> +             *str = "Thermostat Sensor";
> +             return 0;
> +     default:
> +             return -EOPNOTSUPP;
> +     }
> +}
> +
> +static int silicom_fan_control_write(struct device *dev, enum hwmon_sensor_types type,
> +                                  u32 attr, int channel, long val) {
> +     return 0;
> +}
> +
> +static const struct hwmon_ops silicom_fan_control_hwmon_ops = {
> +     .is_visible = silicom_fan_control_is_visible,
> +     .read = silicom_fan_control_read,
> +     .write = silicom_fan_control_write,
> +     .read_string = silicom_fan_control_read_labels, };
> +
> +static const struct hwmon_chip_info silicom_chip_info = {
> +     .ops = &silicom_fan_control_hwmon_ops,
> +     .info = silicom_fan_control_info, };
> +
> +static int __init silicom_platform_probe(struct platform_device 
> +*device) {
> +     int i, err;
> +     u8 magic, ver;
> +     struct silicom_fan_control_data *ctl;
> +     const char *name = "Silocom_Fan_Monitor";
> +     const char *dev_name = "Silicom_platform";
> +
> +     mec_io_base = 0x0800;
> +     mec_io_len = 8;
> +     if (!devm_request_region(&device->dev, mec_io_base, mec_io_len, "mec")) {
> +             dev_err(&device->dev, "couldn't reserve MEC io ports\n");
> +             return -EBUSY;
> +     }
> +
> +     /* Sanity check magic number read for EC */
> +     outb(0x00, MEC_ADDR);
> +     magic = inb(MEC_DATA(0));
> +     ver = inb(MEC_DATA(1));

0 and 1 should be named with defines.

OK, added #define DEFAULT_CHAN_LO 0
#define DEFAULT_CHAN_HI 0

> +     dev_dbg(&device->dev, "EC magic 0x%02x, version 0x%02x\n", 
> + magic, ver);
> +
> +     if (magic != SILICOM_MEC_MAGIC) {
> +             dev_err(&device->dev, "Bad EC magic 0x%02x!\n", magic);
> +             return -ENODEV;
> +     }
> +
> +     if (silicom_led_info) {

How can this be NULL?

Henry: OK, no need for checking. Removed.

> +             err = silicom_mc_leds_register(&device->dev, silicom_led_info);
> +             if (err) {
> +                     dev_err(&device->dev, "Failed to register LEDs\n");
> +                     return err;
> +             }
> +     }
> +
> +     if (silicom_gpiochip) {

How can this be NULL?

Henry: OK, no need to check for NULL. Removed.

> +             err = devm_gpiochip_add_data(&device->dev, silicom_gpiochip, silicom_gpio_channels);
> +             if (err) {
> +                     dev_err(&device->dev, "Failed to register gpiochip: %d\n", err);
> +                     return err;
> +             }
> +     }
> +
> +     ctl = devm_kzalloc(&device->dev, sizeof(*ctl), GFP_KERNEL);
> +     if (!ctl)
> +             return -ENOMEM;
> +
> +     ctl->hdev = devm_hwmon_device_register_with_info(&device->dev, name, ctl,
> +                             &silicom_chip_info, NULL);
> +
> +     my_dev_ctl.my_dev = root_device_register(dev_name);
> +     for (i = 0; i < ARRAY_SIZE(my_dev_attr); i++) {
> +             err = sysfs_create_file(&my_dev_ctl.my_dev->kobj, &my_dev_attr[i].attr);
> +             if (err) {
> +                     pr_debug("failed to create the foo file in /sys/devices/Silicom_platform\n");
> +                     break;
> +             }
> +     }
> +
> +     return err;
> +}
> +
> +static int __init silicom_platform_info_init(const struct 
> +dmi_system_id *id) {
> +     struct silicom_platform_info *info = id->driver_data;
> +
> +     dev_info(&silicom_platform_dev->dev, "Detected %s\n", 
> + id->ident);
> +
> +     mec_io_base = info->io_base;
> +     mec_io_len = info->io_len;
> +     silicom_led_info = info->led_info;
> +     silicom_gpio_channels = info->gpio_channels;
> +     silicom_gpiochip = info->gpiochip;
> +     if (silicom_gpiochip)

How can this be NULL?

Henry: in case something wrong with info->gpiochip


> +             silicom_gpiochip->ngpio = info->ngpio;
> +
> +     return 1;
> +}
> +
> +static const struct dmi_system_id silicom_dmi_ids[] __initconst = {
> +     {
> +             .callback = silicom_platform_info_init,
> +             .ident = "Silicom Cordoba (Generic)",
> +             .matches = {
> +                     DMI_MATCH(DMI_BOARD_VENDOR, "Silicom"),
> +                     DMI_MATCH(DMI_BOARD_NAME, "80300-0214-G"),
> +             },
> +             .driver_data = &silicom_generic_cordoba_info,
> +     },
> +     {
> +             .callback = silicom_platform_info_init,
> +             .ident = "Silicom Cordoba (Generic)",
> +             .matches = {
> +                     DMI_MATCH(DMI_BOARD_VENDOR, "Silicom"),
> +                     DMI_MATCH(DMI_BOARD_NAME, "80500-0214-G"),
> +             },
> +             .driver_data = &silicom_generic_cordoba_info,
> +     },
> +     {
> +              .callback = silicom_platform_info_init,
> +              .ident = "Silicom Cordoba (plat_0222)",
> +              .matches = {
> +                    DMI_MATCH(DMI_BOARD_VENDOR, "Silicom"),
> +                    DMI_MATCH(DMI_BOARD_NAME, "80300-0222-G"),
> +              },

Incorrect indentation x6.

Henry: fixed

> +             .driver_data = &silicom_plat_0222_cordoba_info,
> +     },
> +     { },
> +};
> +
> +static int __init silicom_platform_init(void) {
> +     struct device *dev;
> +     int err;
> +
> +     /* register a platform device to act as the parent for LEDS, etc. */
> +     silicom_platform_dev = platform_device_register_simple("silicom-platform", -1, NULL, 0);
> +     if (IS_ERR(silicom_platform_dev)) {
> +             err = PTR_ERR(silicom_platform_dev);
> +             pr_err("failed to register silicom-platform device: %d\n", err);
> +             goto silicom_init_register_err;
> +     }
> +     dev = &silicom_platform_dev->dev;
> +
> +     err = dmi_check_system(silicom_dmi_ids);
> +     if (err == 0) {
> +             dev_err(dev, "No DMI match for this platform\n");
> +             err = -ENODEV;
> +             goto silicom_init_probe_err;
> +     }
> +
> +     /* Directly probe the platform driver in init since this isn't a
> +      * hotpluggable device.  That means we don't need to register a driver
> +      * that needs to wait around in memory on the chance a matching device
> +      * would get added.  Instead run once in __init so that we can free all
> +      * those resources when the __init region is wiped
> +      */
> +     err = platform_driver_probe(&silicom_platform_driver, silicom_platform_probe);
> +     if (err) {
> +             dev_err(dev, "Failed to probe platform driver %d\n", err);
> +             goto silicom_init_probe_err;
> +     }
> +
> +     return 0;
> +
> +silicom_init_probe_err:
> +     if (silicom_platform_dev) {

How can this by NULL?

Henry: if function platform_device_register_simple() failed to regiseter, silicom_platform_dev will be NULL,

> +             platform_device_unregister(silicom_platform_dev);
> +             silicom_platform_dev = NULL;

Seems unnecessary.

Henry: It is need. I saw when registering device failed, the driver crashes.

> +     }
> +     if (my_dev_ctl.my_dev) {
> +             root_device_unregister(my_dev_ctl.my_dev);
> +             my_dev_ctl.my_dev = NULL;

Ditto.

Henry: It is need. I saw when registering device failed, the driver crashes.


> +     }
> +
> +silicom_init_register_err:
> +     return err;
> +}
> +
> +static void __exit silicom_platform_exit(void) {
> +     int i;
> +
> +     if (silicom_platform_dev) {
> +             platform_device_unregister(silicom_platform_dev);
> +             platform_driver_unregister(&silicom_platform_driver);
> +     }
> +
> +     if (my_dev_ctl.my_dev) {
> +             for (i = 0; i < ARRAY_SIZE(my_dev_attr); i++)
> +                     sysfs_remove_file(&my_dev_ctl.my_dev->kobj, &my_dev_attr[i].attr);
> +             root_device_unregister(my_dev_ctl.my_dev);
> +     }
> +     mutex_destroy(&mec_io_mutex);
> +}
> +
> +module_init(silicom_platform_init);
> +module_exit(silicom_platform_exit);
> +
> +MODULE_LICENSE("GPL");
> +MODULE_AUTHOR("Henry Shi <henrys@silicom-usa.com>"); 
> +MODULE_DESCRIPTION("Platform driver for Silicom network appliances");
> +
> +MODULE_DEVICE_TABLE(dmi, silicom_dmi_ids);
> +

Extra newline in the end.

Henry: OK, removed.

--
 i.
Ilpo Järvinen Aug. 3, 2023, 12:06 p.m. UTC | #10
On Fri, 28 Jul 2023, Huibin Shi wrote:

> Ilpo,
> 
> Thanks for the comments. See my comments below.
> 
> Updated patch will be sent out later after review comments from other reviewer are addressed. 
> 
> Henry
> -----Original Message-----
> From: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> 
> Sent: Wednesday, July 19, 2023 8:13 AM
> To: Henry Shi <henryshi2018@gmail.com>
> Cc: hbshi69@hotmail.com; tglx@linutronix.de; mingo@redhat.com; bp@alien8.de; dave.hansen@linux.intel.com; x86@kernel.org; hpa@zytor.com; hdegoede@redhat.com; markgross@kernel.org; jdelvare@suse.com; linux@roeck-us.net; LKML <linux-kernel@vger.kernel.org>; platform-driver-x86@vger.kernel.org; linux-hwmon@vger.kernel.org; hb_shi2003@yahoo.com; Huibin Shi <henrys@silicom-usa.com>; Wen Wang <wenw@silicom-usa.com>
> Subject: Re: [PATCH] Add Silicom Platform Driver
> 
> Caution: This is an external email. Please take care when clicking links or opening attachments.
> 
> 
> On Tue, 18 Jul 2023, Henry Shi wrote:
> 
> > The Silicom platform (silicom-platform) Linux driver for Swisscom 
> > Business Box (Swisscom BB) as well as Cordoba family products is a 
> > software solution designed to facilitate the efficient management and 
> > control of devices through the integration of various Linux 
> > frameworks. This platform driver provides seamless support for device 
> > management via the Linux LED framework, GPIO framework, Hardware 
> > Monitoring (HWMON), and device attributes. The Silicom platform 
> > driver's compatibility with these Linux frameworks allows applications 
> > to access and control Cordoba family devices using existing software 
> > that is compatible with these frameworks. This compatibility 
> > simplifies the development process, reduces dependencies on 
> > proprietary solutions, and promotes interoperability with other 
> > Linux-based systems and software.
> >
> > Signed-off-by: Henry Shi <henryshi2018@gmail.com>
> > ---
> >  drivers/platform/x86/Kconfig            |   12 +
> >  drivers/platform/x86/Makefile           |    1 +
> >  drivers/platform/x86/silicom-platform.c | 1123 
> > +++++++++++++++++++++++
> >  3 files changed, 1136 insertions(+)
> >  create mode 100644 drivers/platform/x86/silicom-platform.c
> >

> > +void lock_io_modules(void)
> > +{
> > +     mutex_lock(&mec_io_mutex);
> > +}
> > +EXPORT_SYMBOL(lock_io_modules);
> > +
> > +void unlock_io_modules(void)
> > +{
> > +     mutex_unlock(&mec_io_mutex);
> > +}
> > +EXPORT_SYMBOL(unlock_io_modules);

These are unused.

> > +     u32 byte_pos = 0;
> > +
> > +     mutex_lock(&mec_io_mutex);
> > +     /* Select memory region */
> > +     outb(bank, EC_ADDR_MSB);
> > +     outb(offset, EC_ADDR_LSB);
> > +
> > +     /* Set to 1 for current date from the address */
> > +     outb(1, MEC_DATA(byte_pos));
> 
> Hmm, this is really misleading. MEC_DATA() seems to calculate _an offset_, not data? Name things accordingly.
> 
> Henry: OK, changed the defined to  "#define MEC_DATA(offset) ((mec_io_base) + 0x04 + (offset))"

Not much better, unfortunately. Call it MEC_OFFSET() or MEC_DATA_OFFSET() 
instead of MEC_DATA().

> > +static void silicom_gpio_set(struct gpio_chip *gc, unsigned int 
> > +offset, int value) {
> > +     u8 *channels = gpiochip_get_data(gc);
> > +     int direction = silicom_gpio_get_direction(gc, offset);
> > +     int channel = channels[offset];
> > +     u8 reg;
> > +
> > +     if (direction == GPIO_LINE_DIRECTION_IN)
> > +             return;
> > +
> > +     mutex_lock(&mec_io_mutex);
> > +     /* Get the dword offset from the channel */
> > +     outb((channel >> 3) & 0xfc, MEC_ADDR);
> > +
> > +     /* Get the current register */
> > +     reg = inb(MEC_DATA((channel >> 3) & 0x03));
> > +     if (value == 0)
> > +             reg &= ~(1 << (channel & 0x7));
> > +     else if (value > 0)
> > +             reg |= 1 << (channel & 0x7);
> > +     else
> > +             pr_err("Invalid GPIO value: %d\n", value);
> > +     outb(reg, MEC_DATA((channel >> 3) & 0x03));
> > +     mutex_unlock(&mec_io_mutex);
> > +}
> > +
> > +static int silicom_gpio_direction_output(struct gpio_chip *gc, 
> > +unsigned int offset, int value) {
> > +     int direction = silicom_gpio_get_direction(gc, offset);
> > +
> > +     if (direction == GPIO_LINE_DIRECTION_IN)
> > +             return -EINVAL;
> > +
> > +     silicom_gpio_set(gc, offset, value);
> > +
> > +     return 0;
> > +}
> > +
> > +static int silicom_gpio_get(struct gpio_chip *gc, unsigned int 
> > +offset) {
> > +     u8 *channels = gpiochip_get_data(gc);
> > +     int channel = channels[offset];
> > +     u8 reg;
> > +
> > +     mutex_lock(&mec_io_mutex);
> > +     /* Get the dword offset from the channel */
> > +     outb((channel >> 3) & 0xfc, MEC_ADDR);
> > +
> > +     /* Get the current register */
> > +     reg = inb(MEC_DATA((channel >> 3) & 0x03));
> > +     mutex_unlock(&mec_io_mutex);
> > +
> > +     return (reg >> (channel & 0x7)) & 0x01; }

> > +static void silicom_mec_led_set(int channel, int on) {
> > +     u8 reg;
> > +
> > +     mutex_lock(&mec_io_mutex);
> > +     /* Get the dword offset from the channel */
> > +     outb((channel >> 3) & 0xfc, MEC_ADDR);
> > +     /* Get the current LED settings */
> > +     reg = inb(MEC_DATA((channel >> 3) & 0x03));
> > +
> > +     /* Outputs are active low, so clear the bit for on, or set it for off */
> > +     if (on)
> > +             reg &= ~(1 << (channel & 0x7));
> > +     else
> > +             reg |= 1 << (channel & 0x7);
> > +
> > +     /* Write back the updated register */
> > +     outb(reg, MEC_DATA((channel >> 3) & 0x03));
> > +
> > +     mutex_unlock(&mec_io_mutex);
> 
> There's an identical code block in silicom_gpio_set(). Why not simply 
> call this from silicom_gpio_set()? 
> 
> Henry: these two block of date are different: silicom_mec_led_set(xxx, 
> int on), argument on, when on is 1, it means turn on LED; 0 means turn 
> off LED. For  silicom_gpio_set(), the argument value, which is really 
> the 0 or 1 bit value that passed to reg. 

The necessary conversion (and checks) can be made before/when calling the 
function from another. The code is so identical that I don't buy it 
cannot be done (I've diff'ed those functions against each other so I know 
for sure!).

> > +}
> > +
> > +static void silicom_mec_led_mc_brightness_set(struct led_classdev *led_cdev,
> > +                                           enum led_brightness 
> > +brightness) {
> > +     struct led_classdev_mc *mc_cdev = lcdev_to_mccdev(led_cdev);
> > +     int i;
> > +
> > +     led_mc_calc_color_components(mc_cdev, brightness);
> > +
> > +     for (i = 0; i < mc_cdev->num_colors; i++) {
> > +             silicom_mec_led_set(mc_cdev->subled_info[i].channel,
> > +                                 mc_cdev->subled_info[i].brightness);
> > +     }
> > +}
> > +
> > +static enum led_brightness silicom_mec_led_get(int channel) {
> > +     u8 reg;
> > +
> > +     mutex_lock(&mec_io_mutex);
> > +     /* Get the dword offset of the register for this LED from the channel */
> > +     outb((channel >> 3) & 0xfc, MEC_ADDR);
> > +     /* Get the current LED settings */
> > +     reg = inb(MEC_DATA((channel >> 3) & 0x03));
> > +     mutex_unlock(&mec_io_mutex);
> > +
> > +     /* Outputs are active low */
> > +     return reg & (1 << (channel & 0x7)) ? LED_OFF : LED_ON;
> 
> Looks identical to a part of silicom_gpio_get(). Perhaps it should call this function??
> 
> Henry: some of the code block of these two functions are similar. But 
> function return types are different. Gpio has status of 0 or 1, but LED 
> has status of LED_OFF and LED_ON. 

The same comment as above for the set. I think the return types can be 
converted in the calling function before returning.

> > +static int __init silicom_platform_info_init(const struct 
> > +dmi_system_id *id) {
> > +     struct silicom_platform_info *info = id->driver_data;
> > +
> > +     dev_info(&silicom_platform_dev->dev, "Detected %s\n", 
> > + id->ident);
> > +
> > +     mec_io_base = info->io_base;
> > +     mec_io_len = info->io_len;
> > +     silicom_led_info = info->led_info;
> > +     silicom_gpio_channels = info->gpio_channels;
> > +     silicom_gpiochip = info->gpiochip;
> > +     if (silicom_gpiochip)
> 
> How can this be NULL?
> 
> Henry: in case something wrong with info->gpiochip

But how can that occur? Both struct defining silicom_platform_info provide
a non-NULL value. There's no need for such safety construct which cannot 
be every true within the kernel code.

> > +static int __init silicom_platform_init(void) {
> > +     struct device *dev;
> > +     int err;
> > +
> > +     /* register a platform device to act as the parent for LEDS, etc. */
> > +     silicom_platform_dev = platform_device_register_simple("silicom-platform", -1, NULL, 0);
> > +     if (IS_ERR(silicom_platform_dev)) {
> > +             err = PTR_ERR(silicom_platform_dev);
> > +             pr_err("failed to register silicom-platform device: %d\n", err);
> > +             goto silicom_init_register_err;

Instead of goto, return directly as there's nothing to rollback:

return err;

> > +     }
> > +     dev = &silicom_platform_dev->dev;
> > +
> > +     err = dmi_check_system(silicom_dmi_ids);
> > +     if (err == 0) {
> > +             dev_err(dev, "No DMI match for this platform\n");
> > +             err = -ENODEV;
> > +             goto silicom_init_probe_err;
> > +     }
> > +
> > +     /* Directly probe the platform driver in init since this isn't a
> > +      * hotpluggable device.  That means we don't need to register a driver
> > +      * that needs to wait around in memory on the chance a matching device
> > +      * would get added.  Instead run once in __init so that we can free all
> > +      * those resources when the __init region is wiped
> > +      */
> > +     err = platform_driver_probe(&silicom_platform_driver, silicom_platform_probe);
> > +     if (err) {
> > +             dev_err(dev, "Failed to probe platform driver %d\n", err);
> > +             goto silicom_init_probe_err;
> > +     }
> > +
> > +     return 0;
> > +
> > +silicom_init_probe_err:
> > +     if (silicom_platform_dev) {
> 
> How can this by NULL?
> 
> Henry: if function platform_device_register_simple() failed to regiseter, silicom_platform_dev will be NULL,

Ah, sorry. I should have mentioned that that branch should return error 
instead rather than gotoing here.

> > +             platform_device_unregister(silicom_platform_dev);
> > +             silicom_platform_dev = NULL;
> 
> Seems unnecessary.
> 
> Henry: It is need. I saw when registering device failed, the driver crashes.

From which access of silicom_platform_dev??

> > +     }
> > +     if (my_dev_ctl.my_dev) {
> > +             root_device_unregister(my_dev_ctl.my_dev);
> > +             my_dev_ctl.my_dev = NULL;
> 
> Ditto.
> 
> Henry: It is need. I saw when registering device failed, the driver crashes.

Ah, I didn't notice it before but this should be properly arranged into 
reverse order such that goto xx can target the correct amount of rollback 
(in reverse order than init). Add xx labels as necessary for each 
rollback step you need to jump to.

> > +     }
> > +
> > +silicom_init_register_err:
> > +     return err;
> > +}
Huibin Shi Aug. 8, 2023, 7:19 p.m. UTC | #11
Guenter,

Here is the implementation of  devm_kmemdup(), *src is the extra argument

void *devm_kmemdup(struct device *dev, const void *src, size_t len, gfp_t gfp)
{
	void *p;

	p = devm_kmalloc(dev, len, gfp);
	if (p)
		memcpy(p, src, len);

	return p;
}

Henry
-----Original Message-----
From: Guenter Roeck <groeck7@gmail.com> On Behalf Of Guenter Roeck
Sent: Friday, July 28, 2023 10:29 AM
To: Huibin Shi <henrys@silicom-usa.com>; Christophe JAILLET <christophe.jaillet@wanadoo.fr>; Henry Shi <henryshi2018@gmail.com>; hbshi69@hotmail.com; tglx@linutronix.de; mingo@redhat.com; bp@alien8.de; dave.hansen@linux.intel.com; x86@kernel.org; hpa@zytor.com; hdegoede@redhat.com; markgross@kernel.org; jdelvare@suse.com; linux-kernel@vger.kernel.org; platform-driver-x86@vger.kernel.org; linux-hwmon@vger.kernel.org
Cc: hb_shi2003@yahoo.com; Wen Wang <wenw@silicom-usa.com>
Subject: Re: [PATCH] Add Silicom Platform Driver

Caution: This is an external email. Please take care when clicking links or opening attachments.


On 7/28/23 05:59, Huibin Shi wrote:
> Christophe,
>
> Thanks for the comments. See my comments below.
>
> Updated patch will be sent out later after review comments from other reviewers are addressed.
>
> Henry
> -----Original Message-----
> From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
> Sent: Tuesday, July 25, 2023 5:03 PM
> To: Henry Shi <henryshi2018@gmail.com>; hbshi69@hotmail.com; 
> tglx@linutronix.de; mingo@redhat.com; bp@alien8.de; 
> dave.hansen@linux.intel.com; x86@kernel.org; hpa@zytor.com; 
> hdegoede@redhat.com; markgross@kernel.org; jdelvare@suse.com; 
> linux@roeck-us.net; linux-kernel@vger.kernel.org; 
> platform-driver-x86@vger.kernel.org; linux-hwmon@vger.kernel.org
> Cc: hb_shi2003@yahoo.com; Huibin Shi <henrys@silicom-usa.com>; Wen 
> Wang <wenw@silicom-usa.com>
> Subject: Re: [PATCH] Add Silicom Platform Driver
>
> Caution: This is an external email. Please take care when clicking links or opening attachments.
>
>
> Le 18/07/2023 à 18:01, Henry Shi a écrit :
>> The Silicom platform (silicom-platform) Linux driver for Swisscom 
>> Business Box (Swisscom BB) as well as Cordoba family products is a 
>> software solution designed to facilitate the efficient management and 
>> control of devices through the integration of various Linux 
>> frameworks. This platform driver provides seamless support for device 
>> management via the Linux LED framework, GPIO framework, Hardware 
>> Monitoring (HWMON), and device attributes. The Silicom platform 
>> driver's compatibility with these Linux frameworks allows 
>> applications to access and control Cordoba family devices using 
>> existing software that is compatible with these frameworks. This 
>> compatibility simplifies the development process, reduces 
>> dependencies on proprietary solutions, and promotes interoperability 
>> with other Linux-based systems and software.
>>
>> Signed-off-by: Henry Shi <henryshi2018@gmail.com>
>> ---
>
> [...]
>
>> +static int __init silicom_mc_leds_register(struct device *dev,
>> +                                        const struct led_classdev_mc
>> +*mc_leds) {
>> +     struct led_classdev_mc *led;
>> +     int i, err;
>> +
>> +     for (i = 0; mc_leds[i].led_cdev.name; i++) {
>> +             /* allocate and copy data from the init constansts */
>> +             led = devm_kzalloc(dev, sizeof(struct led_classdev_mc), 
>> + GFP_KERNEL);
>
> sizeof(*led) is shorter.
> Mostly a matter of taste.
>
> Maybe even devm_kmemdup()?
>
> Henry: thanks. Devm_kmemdup() API requires additional argument that is not necessary of this driver. I prefer devm_kzalloc for now.
>

I am curious: What would that additional argument be ?

Guenter
Huibin Shi Aug. 8, 2023, 7:23 p.m. UTC | #12
See my comments below:

-----Original Message-----
From: Guenter Roeck <groeck7@gmail.com> On Behalf Of Guenter Roeck
Sent: Friday, July 28, 2023 1:53 PM
To: Christophe JAILLET <christophe.jaillet@wanadoo.fr>; Huibin Shi <henrys@silicom-usa.com>; Henry Shi <henryshi2018@gmail.com>; hbshi69@hotmail.com; tglx@linutronix.de; mingo@redhat.com; bp@alien8.de; dave.hansen@linux.intel.com; x86@kernel.org; hpa@zytor.com; hdegoede@redhat.com; markgross@kernel.org; jdelvare@suse.com; linux-kernel@vger.kernel.org; platform-driver-x86@vger.kernel.org; linux-hwmon@vger.kernel.org
Cc: hb_shi2003@yahoo.com; Wen Wang <wenw@silicom-usa.com>
Subject: Re: [PATCH] Add Silicom Platform Driver

Caution: This is an external email. Please take care when clicking links or opening attachments.


On 7/28/23 09:47, Christophe JAILLET wrote:
> Le 28/07/2023 à 14:59, Huibin Shi a écrit :
>> Christophe,
>>
>> Thanks for the comments. See my comments below.
>>
>> Updated patch will be sent out later after review comments from other reviewers are addressed.
>>
>> Henry
>> -----Original Message-----
>> From: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
>> Sent: Tuesday, July 25, 2023 5:03 PM
>> To: Henry Shi <henryshi2018@gmail.com>; hbshi69@hotmail.com; 
>> tglx@linutronix.de; mingo@redhat.com; bp@alien8.de; 
>> dave.hansen@linux.intel.com; x86@kernel.org; hpa@zytor.com; 
>> hdegoede@redhat.com; markgross@kernel.org; jdelvare@suse.com; 
>> linux@roeck-us.net; linux-kernel@vger.kernel.org; 
>> platform-driver-x86@vger.kernel.org; linux-hwmon@vger.kernel.org
>> Cc: hb_shi2003@yahoo.com; Huibin Shi <henrys@silicom-usa.com>; Wen 
>> Wang <wenw@silicom-usa.com>
>> Subject: Re: [PATCH] Add Silicom Platform Driver
>>
>> Caution: This is an external email. Please take care when clicking links or opening attachments.
>>
>>
>> Le 18/07/2023 à 18:01, Henry Shi a écrit :
>>> The Silicom platform (silicom-platform) Linux driver for Swisscom 
>>> Business Box (Swisscom BB) as well as Cordoba family products is a 
>>> software solution designed to facilitate the efficient management 
>>> and control of devices through the integration of various Linux 
>>> frameworks. This platform driver provides seamless support for 
>>> device management via the Linux LED framework, GPIO framework, 
>>> Hardware Monitoring (HWMON), and device attributes. The Silicom 
>>> platform driver's compatibility with these Linux frameworks allows 
>>> applications to access and control Cordoba family devices using 
>>> existing software that is compatible with these frameworks. This 
>>> compatibility simplifies the development process, reduces 
>>> dependencies on proprietary solutions, and promotes interoperability 
>>> with other Linux-based systems and software.
>>>
>>> Signed-off-by: Henry Shi <henryshi2018@gmail.com>
>>> ---
>>
>> [...]
>>
>>> +static int __init silicom_mc_leds_register(struct device *dev,
>>> +                                        const struct 
>>> +led_classdev_mc
>>> +*mc_leds) {
>>> +     struct led_classdev_mc *led;
>>> +     int i, err;
>>> +
>>> +     for (i = 0; mc_leds[i].led_cdev.name; i++) {
>>> +             /* allocate and copy data from the init constansts */
>>> +             led = devm_kzalloc(dev, sizeof(struct 
>>> + led_classdev_mc), GFP_KERNEL);
>>
>> sizeof(*led) is shorter.
>> Mostly a matter of taste.
>>
>> Maybe even devm_kmemdup()?
>>
>> Henry: thanks. Devm_kmemdup() API requires additional argument that is not necessary of this driver. I prefer devm_kzalloc for now.
>
> CJ: The only additionnal parameter I can think of are the one of memcpy() ...
>
>>
>>> +             if (IS_ERR_OR_NULL(led)) {
>>
>> if (!led)
>> is enough.
>>
>> Henry: OK, changed
>>
>>> +                     dev_err(dev, "Failed to alloc
>>> + led_classdev_mc[%d]: %ld\n", i, PTR_ERR(led));
>>
>> This kind of message is useless and should be removed (checkpatch 
>> should warn about it)
>>
>> Henry: OK, removed.
>>
>>> +                     return -ENOMEM;
>>> +             }
>>> +             memcpy(led, &mc_leds[i], sizeof(*led));
>
> ... here.
>
> devm_kzalloc() + this memcpy() could be done with only devm_kmemdup().
>
> This is mostly a matter of taste.
>

I don't think that using (or not using) available API functions should be a matter of taste, or the next step might be to re-implement memcpy().

Henry: Agree.

Guenter
Guenter Roeck Aug. 8, 2023, 7:35 p.m. UTC | #13
On 8/8/23 12:19, Huibin Shi wrote:
> Guenter,
> 
> Here is the implementation of  devm_kmemdup(), *src is the extra argument
> 
> void *devm_kmemdup(struct device *dev, const void *src, size_t len, gfp_t gfp)
> {
> 	void *p;
> 
> 	p = devm_kmalloc(dev, len, gfp);
> 	if (p)
> 		memcpy(p, src, len);
> 
> 	return p;
> }
> 

So you don't want to use devm_kmemdup() because of its 'src' argument, and instead
re-implement it locally by using devm_kzalloc() followed by memcpy() ? Really ?

Guenter
Huibin Shi Aug. 8, 2023, 8:39 p.m. UTC | #14
I mean this is the kernel implementation of devm_kmemdup() function in /driver/base/devres.c. 

Henry
-----Original Message-----
From: Guenter Roeck <groeck7@gmail.com> On Behalf Of Guenter Roeck
Sent: Tuesday, August 8, 2023 3:36 PM
To: Huibin Shi <henrys@silicom-usa.com>; Christophe JAILLET <christophe.jaillet@wanadoo.fr>; Henry Shi <henryshi2018@gmail.com>; hbshi69@hotmail.com; tglx@linutronix.de; mingo@redhat.com; bp@alien8.de; dave.hansen@linux.intel.com; x86@kernel.org; hpa@zytor.com; hdegoede@redhat.com; markgross@kernel.org; jdelvare@suse.com; linux-kernel@vger.kernel.org; platform-driver-x86@vger.kernel.org; linux-hwmon@vger.kernel.org
Cc: hb_shi2003@yahoo.com; Wen Wang <wenw@silicom-usa.com>
Subject: Re: [PATCH] Add Silicom Platform Driver

Caution: This is an external email. Please take care when clicking links or opening attachments.


On 8/8/23 12:19, Huibin Shi wrote:
> Guenter,
>
> Here is the implementation of  devm_kmemdup(), *src is the extra 
> argument
>
> void *devm_kmemdup(struct device *dev, const void *src, size_t len, 
> gfp_t gfp) {
>       void *p;
>
>       p = devm_kmalloc(dev, len, gfp);
>       if (p)
>               memcpy(p, src, len);
>
>       return p;
> }
>

So you don't want to use devm_kmemdup() because of its 'src' argument, and instead re-implement it locally by using devm_kzalloc() followed by memcpy() ? Really ?

Guenter
Huibin Shi Aug. 10, 2023, 5:48 p.m. UTC | #15
Ilpo, 

See my comments below.

Thanks.
Henry
----Original Message-----
From: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com> 
Sent: Thursday, August 3, 2023 8:07 AM
To: Huibin Shi <henrys@silicom-usa.com>
Cc: tglx@linutronix.de; mingo@redhat.com; bp@alien8.de; dave.hansen@linux.intel.com; x86@kernel.org; hpa@zytor.com; hdegoede@redhat.com; markgross@kernel.org; jdelvare@suse.com; linux@roeck-us.net; linux-kernel@vger.kernel.org; platform-driver-x86@vger.kernel.org; linux-hwmon@vger.kernel.org; hb_shi2003@yahoo.com; Wen Wang <wenw@silicom-usa.com>
Subject: RE: [PATCH] Add Silicom Platform Driver

Caution: This is an external email. Please take care when clicking links or opening attachments.


On Fri, 28 Jul 2023, Huibin Shi wrote:

> Ilpo,
>
> Thanks for the comments. See my comments below.
>
> Updated patch will be sent out later after review comments from other reviewer are addressed.
>
> Henry
> -----Original Message-----
> From: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
> Sent: Wednesday, July 19, 2023 8:13 AM
> To: Henry Shi <henryshi2018@gmail.com>
> Cc: hbshi69@hotmail.com; tglx@linutronix.de; mingo@redhat.com; 
> bp@alien8.de; dave.hansen@linux.intel.com; x86@kernel.org; 
> hpa@zytor.com; hdegoede@redhat.com; markgross@kernel.org; 
> jdelvare@suse.com; linux@roeck-us.net; LKML 
> <linux-kernel@vger.kernel.org>; platform-driver-x86@vger.kernel.org; 
> linux-hwmon@vger.kernel.org; hb_shi2003@yahoo.com; Huibin Shi 
> <henrys@silicom-usa.com>; Wen Wang <wenw@silicom-usa.com>
> Subject: Re: [PATCH] Add Silicom Platform Driver
>
> Caution: This is an external email. Please take care when clicking links or opening attachments.
>
>
> On Tue, 18 Jul 2023, Henry Shi wrote:
>
> > The Silicom platform (silicom-platform) Linux driver for Swisscom 
> > Business Box (Swisscom BB) as well as Cordoba family products is a 
> > software solution designed to facilitate the efficient management 
> > and control of devices through the integration of various Linux 
> > frameworks. This platform driver provides seamless support for 
> > device management via the Linux LED framework, GPIO framework, 
> > Hardware Monitoring (HWMON), and device attributes. The Silicom 
> > platform driver's compatibility with these Linux frameworks allows 
> > applications to access and control Cordoba family devices using 
> > existing software that is compatible with these frameworks. This 
> > compatibility simplifies the development process, reduces 
> > dependencies on proprietary solutions, and promotes interoperability 
> > with other Linux-based systems and software.
> >
> > Signed-off-by: Henry Shi <henryshi2018@gmail.com>
> > ---
> >  drivers/platform/x86/Kconfig            |   12 +
> >  drivers/platform/x86/Makefile           |    1 +
> >  drivers/platform/x86/silicom-platform.c | 1123
> > +++++++++++++++++++++++
> >  3 files changed, 1136 insertions(+)  create mode 100644 
> > drivers/platform/x86/silicom-platform.c
> >

> > +void lock_io_modules(void)
> > +{
> > +     mutex_lock(&mec_io_mutex);
> > +}
> > +EXPORT_SYMBOL(lock_io_modules);
> > +
> > +void unlock_io_modules(void)
> > +{
> > +     mutex_unlock(&mec_io_mutex);
> > +}
> > +EXPORT_SYMBOL(unlock_io_modules);

These are unused.

Henry: This will be used by another Silicom driver, which source code is not pushed to kernel repository. 


> > +     u32 byte_pos = 0;
> > +
> > +     mutex_lock(&mec_io_mutex);
> > +     /* Select memory region */
> > +     outb(bank, EC_ADDR_MSB);
> > +     outb(offset, EC_ADDR_LSB);
> > +
> > +     /* Set to 1 for current date from the address */
> > +     outb(1, MEC_DATA(byte_pos));
>
> Hmm, this is really misleading. MEC_DATA() seems to calculate _an offset_, not data? Name things accordingly.
>
> Henry: OK, changed the defined to  "#define MEC_DATA(offset) ((mec_io_base) + 0x04 + (offset))"

Not much better, unfortunately. Call it MEC_OFFSET() or MEC_DATA_OFFSET() instead of MEC_DATA().

Henry: Agree.

> > +static void silicom_gpio_set(struct gpio_chip *gc, unsigned int 
> > +offset, int value) {
> > +     u8 *channels = gpiochip_get_data(gc);
> > +     int direction = silicom_gpio_get_direction(gc, offset);
> > +     int channel = channels[offset];
> > +     u8 reg;
> > +
> > +     if (direction == GPIO_LINE_DIRECTION_IN)
> > +             return;
> > +
> > +     mutex_lock(&mec_io_mutex);
> > +     /* Get the dword offset from the channel */
> > +     outb((channel >> 3) & 0xfc, MEC_ADDR);
> > +
> > +     /* Get the current register */
> > +     reg = inb(MEC_DATA((channel >> 3) & 0x03));
> > +     if (value == 0)
> > +             reg &= ~(1 << (channel & 0x7));
> > +     else if (value > 0)
> > +             reg |= 1 << (channel & 0x7);
> > +     else
> > +             pr_err("Invalid GPIO value: %d\n", value);
> > +     outb(reg, MEC_DATA((channel >> 3) & 0x03));
> > +     mutex_unlock(&mec_io_mutex);
> > +}
> > +
> > +static int silicom_gpio_direction_output(struct gpio_chip *gc, 
> > +unsigned int offset, int value) {
> > +     int direction = silicom_gpio_get_direction(gc, offset);
> > +
> > +     if (direction == GPIO_LINE_DIRECTION_IN)
> > +             return -EINVAL;
> > +
> > +     silicom_gpio_set(gc, offset, value);
> > +
> > +     return 0;
> > +}
> > +
> > +static int silicom_gpio_get(struct gpio_chip *gc, unsigned int
> > +offset) {
> > +     u8 *channels = gpiochip_get_data(gc);
> > +     int channel = channels[offset];
> > +     u8 reg;
> > +
> > +     mutex_lock(&mec_io_mutex);
> > +     /* Get the dword offset from the channel */
> > +     outb((channel >> 3) & 0xfc, MEC_ADDR);
> > +
> > +     /* Get the current register */
> > +     reg = inb(MEC_DATA((channel >> 3) & 0x03));
> > +     mutex_unlock(&mec_io_mutex);
> > +
> > +     return (reg >> (channel & 0x7)) & 0x01; }

> > +static void silicom_mec_led_set(int channel, int on) {
> > +     u8 reg;
> > +
> > +     mutex_lock(&mec_io_mutex);
> > +     /* Get the dword offset from the channel */
> > +     outb((channel >> 3) & 0xfc, MEC_ADDR);
> > +     /* Get the current LED settings */
> > +     reg = inb(MEC_DATA((channel >> 3) & 0x03));
> > +
> > +     /* Outputs are active low, so clear the bit for on, or set it for off */
> > +     if (on)
> > +             reg &= ~(1 << (channel & 0x7));
> > +     else
> > +             reg |= 1 << (channel & 0x7);
> > +
> > +     /* Write back the updated register */
> > +     outb(reg, MEC_DATA((channel >> 3) & 0x03));
> > +
> > +     mutex_unlock(&mec_io_mutex);
>
> There's an identical code block in silicom_gpio_set(). Why not simply 
> call this from silicom_gpio_set()?
>
> Henry: these two block of date are different: silicom_mec_led_set(xxx, 
> int on), argument on, when on is 1, it means turn on LED; 0 means turn 
> off LED. For  silicom_gpio_set(), the argument value, which is really 
> the 0 or 1 bit value that passed to reg.

The necessary conversion (and checks) can be made before/when calling the function from another. The code is so identical that I don't buy it cannot be done (I've diff'ed those functions against each other so I know for sure!).

Henry: OK, I will change it in next submission.

> > +}
> > +
> > +static void silicom_mec_led_mc_brightness_set(struct led_classdev *led_cdev,
> > +                                           enum led_brightness
> > +brightness) {
> > +     struct led_classdev_mc *mc_cdev = lcdev_to_mccdev(led_cdev);
> > +     int i;
> > +
> > +     led_mc_calc_color_components(mc_cdev, brightness);
> > +
> > +     for (i = 0; i < mc_cdev->num_colors; i++) {
> > +             silicom_mec_led_set(mc_cdev->subled_info[i].channel,
> > +                                 mc_cdev->subled_info[i].brightness);
> > +     }
> > +}
> > +
> > +static enum led_brightness silicom_mec_led_get(int channel) {
> > +     u8 reg;
> > +
> > +     mutex_lock(&mec_io_mutex);
> > +     /* Get the dword offset of the register for this LED from the channel */
> > +     outb((channel >> 3) & 0xfc, MEC_ADDR);
> > +     /* Get the current LED settings */
> > +     reg = inb(MEC_DATA((channel >> 3) & 0x03));
> > +     mutex_unlock(&mec_io_mutex);
> > +
> > +     /* Outputs are active low */
> > +     return reg & (1 << (channel & 0x7)) ? LED_OFF : LED_ON;
>
> Looks identical to a part of silicom_gpio_get(). Perhaps it should call this function??
>
> Henry: some of the code block of these two functions are similar. But 
> function return types are different. Gpio has status of 0 or 1, but 
> LED has status of LED_OFF and LED_ON.

The same comment as above for the set. I think the return types can be converted in the calling function before returning.

Henry: OK.

> > +static int __init silicom_platform_info_init(const struct 
> > +dmi_system_id *id) {
> > +     struct silicom_platform_info *info = id->driver_data;
> > +
> > +     dev_info(&silicom_platform_dev->dev, "Detected %s\n",
> > + id->ident);
> > +
> > +     mec_io_base = info->io_base;
> > +     mec_io_len = info->io_len;
> > +     silicom_led_info = info->led_info;
> > +     silicom_gpio_channels = info->gpio_channels;
> > +     silicom_gpiochip = info->gpiochip;
> > +     if (silicom_gpiochip)
>
> How can this be NULL?
>
> Henry: in case something wrong with info->gpiochip

But how can that occur? Both struct defining silicom_platform_info provide a non-NULL value. There's no need for such safety construct which cannot be every true within the kernel code.

Henry: OK, will remove checking. 

> > +static int __init silicom_platform_init(void) {
> > +     struct device *dev;
> > +     int err;
> > +
> > +     /* register a platform device to act as the parent for LEDS, etc. */
> > +     silicom_platform_dev = platform_device_register_simple("silicom-platform", -1, NULL, 0);
> > +     if (IS_ERR(silicom_platform_dev)) {
> > +             err = PTR_ERR(silicom_platform_dev);
> > +             pr_err("failed to register silicom-platform device: %d\n", err);
> > +             goto silicom_init_register_err;

Instead of goto, return directly as there's nothing to rollback:

return err;

Henry: OK.

> > +     }
> > +     dev = &silicom_platform_dev->dev;
> > +
> > +     err = dmi_check_system(silicom_dmi_ids);
> > +     if (err == 0) {
> > +             dev_err(dev, "No DMI match for this platform\n");
> > +             err = -ENODEV;
> > +             goto silicom_init_probe_err;
> > +     }
> > +
> > +     /* Directly probe the platform driver in init since this isn't a
> > +      * hotpluggable device.  That means we don't need to register a driver
> > +      * that needs to wait around in memory on the chance a matching device
> > +      * would get added.  Instead run once in __init so that we can free all
> > +      * those resources when the __init region is wiped
> > +      */
> > +     err = platform_driver_probe(&silicom_platform_driver, silicom_platform_probe);
> > +     if (err) {
> > +             dev_err(dev, "Failed to probe platform driver %d\n", err);
> > +             goto silicom_init_probe_err;
> > +     }
> > +
> > +     return 0;
> > +
> > +silicom_init_probe_err:
> > +     if (silicom_platform_dev) {
>
> How can this by NULL?
>
> Henry: if function platform_device_register_simple() failed to 
> regiseter, silicom_platform_dev will be NULL,

Ah, sorry. I should have mentioned that that branch should return error instead rather than gotoing here.

Henry: OK. 

> > +             platform_device_unregister(silicom_platform_dev);
> > +             silicom_platform_dev = NULL;
>
> Seems unnecessary.
>
> Henry: It is need. I saw when registering device failed, the driver crashes.

From which access of silicom_platform_dev??

> > +     }
> > +     if (my_dev_ctl.my_dev) {
> > +             root_device_unregister(my_dev_ctl.my_dev);
> > +             my_dev_ctl.my_dev = NULL;
>
> Ditto.
>
> Henry: It is need. I saw when registering device failed, the driver crashes.

Ah, I didn't notice it before but this should be properly arranged into reverse order such that goto xx can target the correct amount of rollback (in reverse order than init). Add xx labels as necessary for each rollback step you need to jump to.

Henry: OK.

> > +     }
> > +
> > +silicom_init_register_err:
> > +     return err;
> > +}


--
 i.
Guenter Roeck Aug. 10, 2023, 6 p.m. UTC | #16
On 8/10/23 10:48, Huibin Shi wrote:
> Ilpo,
> 
> See my comments below.
> 
> Thanks.
> Henry
> ----Original Message-----
> From: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
> Sent: Thursday, August 3, 2023 8:07 AM
> To: Huibin Shi <henrys@silicom-usa.com>
> Cc: tglx@linutronix.de; mingo@redhat.com; bp@alien8.de; dave.hansen@linux.intel.com; x86@kernel.org; hpa@zytor.com; hdegoede@redhat.com; markgross@kernel.org; jdelvare@suse.com; linux@roeck-us.net; linux-kernel@vger.kernel.org; platform-driver-x86@vger.kernel.org; linux-hwmon@vger.kernel.org; hb_shi2003@yahoo.com; Wen Wang <wenw@silicom-usa.com>
> Subject: RE: [PATCH] Add Silicom Platform Driver
> 
> Caution: This is an external email. Please take care when clicking links or opening attachments.
> 
> 
> On Fri, 28 Jul 2023, Huibin Shi wrote:
> 
>> Ilpo,
>>
>> Thanks for the comments. See my comments below.
>>
>> Updated patch will be sent out later after review comments from other reviewer are addressed.
>>
>> Henry
>> -----Original Message-----
>> From: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
>> Sent: Wednesday, July 19, 2023 8:13 AM
>> To: Henry Shi <henryshi2018@gmail.com>
>> Cc: hbshi69@hotmail.com; tglx@linutronix.de; mingo@redhat.com;
>> bp@alien8.de; dave.hansen@linux.intel.com; x86@kernel.org;
>> hpa@zytor.com; hdegoede@redhat.com; markgross@kernel.org;
>> jdelvare@suse.com; linux@roeck-us.net; LKML
>> <linux-kernel@vger.kernel.org>; platform-driver-x86@vger.kernel.org;
>> linux-hwmon@vger.kernel.org; hb_shi2003@yahoo.com; Huibin Shi
>> <henrys@silicom-usa.com>; Wen Wang <wenw@silicom-usa.com>
>> Subject: Re: [PATCH] Add Silicom Platform Driver
>>
>> Caution: This is an external email. Please take care when clicking links or opening attachments.
>>
>>
>> On Tue, 18 Jul 2023, Henry Shi wrote:
>>
>>> The Silicom platform (silicom-platform) Linux driver for Swisscom
>>> Business Box (Swisscom BB) as well as Cordoba family products is a
>>> software solution designed to facilitate the efficient management
>>> and control of devices through the integration of various Linux
>>> frameworks. This platform driver provides seamless support for
>>> device management via the Linux LED framework, GPIO framework,
>>> Hardware Monitoring (HWMON), and device attributes. The Silicom
>>> platform driver's compatibility with these Linux frameworks allows
>>> applications to access and control Cordoba family devices using
>>> existing software that is compatible with these frameworks. This
>>> compatibility simplifies the development process, reduces
>>> dependencies on proprietary solutions, and promotes interoperability
>>> with other Linux-based systems and software.
>>>
>>> Signed-off-by: Henry Shi <henryshi2018@gmail.com>
>>> ---
>>>   drivers/platform/x86/Kconfig            |   12 +
>>>   drivers/platform/x86/Makefile           |    1 +
>>>   drivers/platform/x86/silicom-platform.c | 1123
>>> +++++++++++++++++++++++
>>>   3 files changed, 1136 insertions(+)  create mode 100644
>>> drivers/platform/x86/silicom-platform.c
>>>
> 
>>> +void lock_io_modules(void)
>>> +{
>>> +     mutex_lock(&mec_io_mutex);
>>> +}
>>> +EXPORT_SYMBOL(lock_io_modules);
>>> +
>>> +void unlock_io_modules(void)
>>> +{
>>> +     mutex_unlock(&mec_io_mutex);
>>> +}
>>> +EXPORT_SYMBOL(unlock_io_modules);
> 
> These are unused.
> 
> Henry: This will be used by another Silicom driver, which source code is not pushed to kernel repository.
> 

Not an argument. Export it if and when needed. If that other driver won't be sent
upstream, the export should not be upstream either.

Guenter
Guenter Roeck Aug. 10, 2023, 6:01 p.m. UTC | #17
On 8/10/23 10:48, Huibin Shi wrote:
> Ilpo,
> 
> See my comments below.
> 
> Thanks.
> Henry
> ----Original Message-----
> From: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
> Sent: Thursday, August 3, 2023 8:07 AM
> To: Huibin Shi <henrys@silicom-usa.com>
> Cc: tglx@linutronix.de; mingo@redhat.com; bp@alien8.de; dave.hansen@linux.intel.com; x86@kernel.org; hpa@zytor.com; hdegoede@redhat.com; markgross@kernel.org; jdelvare@suse.com; linux@roeck-us.net; linux-kernel@vger.kernel.org; platform-driver-x86@vger.kernel.org; linux-hwmon@vger.kernel.org; hb_shi2003@yahoo.com; Wen Wang <wenw@silicom-usa.com>
> Subject: RE: [PATCH] Add Silicom Platform Driver
> 
> Caution: This is an external email. Please take care when clicking links or opening attachments.
> 
> 
> On Fri, 28 Jul 2023, Huibin Shi wrote:
> 
>> Ilpo,
>>
>> Thanks for the comments. See my comments below.
>>
>> Updated patch will be sent out later after review comments from other reviewer are addressed.
>>
>> Henry
>> -----Original Message-----
>> From: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
>> Sent: Wednesday, July 19, 2023 8:13 AM
>> To: Henry Shi <henryshi2018@gmail.com>
>> Cc: hbshi69@hotmail.com; tglx@linutronix.de; mingo@redhat.com;
>> bp@alien8.de; dave.hansen@linux.intel.com; x86@kernel.org;
>> hpa@zytor.com; hdegoede@redhat.com; markgross@kernel.org;
>> jdelvare@suse.com; linux@roeck-us.net; LKML
>> <linux-kernel@vger.kernel.org>; platform-driver-x86@vger.kernel.org;
>> linux-hwmon@vger.kernel.org; hb_shi2003@yahoo.com; Huibin Shi
>> <henrys@silicom-usa.com>; Wen Wang <wenw@silicom-usa.com>
>> Subject: Re: [PATCH] Add Silicom Platform Driver
>>
>> Caution: This is an external email. Please take care when clicking links or opening attachments.
>>
>>
>> On Tue, 18 Jul 2023, Henry Shi wrote:
>>
>>> The Silicom platform (silicom-platform) Linux driver for Swisscom
>>> Business Box (Swisscom BB) as well as Cordoba family products is a
>>> software solution designed to facilitate the efficient management
>>> and control of devices through the integration of various Linux
>>> frameworks. This platform driver provides seamless support for
>>> device management via the Linux LED framework, GPIO framework,
>>> Hardware Monitoring (HWMON), and device attributes. The Silicom
>>> platform driver's compatibility with these Linux frameworks allows
>>> applications to access and control Cordoba family devices using
>>> existing software that is compatible with these frameworks. This
>>> compatibility simplifies the development process, reduces
>>> dependencies on proprietary solutions, and promotes interoperability
>>> with other Linux-based systems and software.
>>>
>>> Signed-off-by: Henry Shi <henryshi2018@gmail.com>
>>> ---
>>>   drivers/platform/x86/Kconfig            |   12 +
>>>   drivers/platform/x86/Makefile           |    1 +
>>>   drivers/platform/x86/silicom-platform.c | 1123
>>> +++++++++++++++++++++++
>>>   3 files changed, 1136 insertions(+)  create mode 100644
>>> drivers/platform/x86/silicom-platform.c
>>>
> 
>>> +void lock_io_modules(void)
>>> +{
>>> +     mutex_lock(&mec_io_mutex);
>>> +}
>>> +EXPORT_SYMBOL(lock_io_modules);
>>> +
>>> +void unlock_io_modules(void)
>>> +{
>>> +     mutex_unlock(&mec_io_mutex);
>>> +}
>>> +EXPORT_SYMBOL(unlock_io_modules);
> 
> These are unused.
> 
> Henry: This will be used by another Silicom driver, which source code is not pushed to kernel repository.
> 

Besides, those function names are _way_ too generic for public symbols,
and even more so for exports.

Guenter
Huibin Shi Aug. 14, 2023, 1:07 p.m. UTC | #18
-----Original Message-----
From: Guenter Roeck <groeck7@gmail.com> On Behalf Of Guenter Roeck
Sent: Thursday, August 10, 2023 2:00 PM
To: Huibin Shi <henrys@silicom-usa.com>; Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: tglx@linutronix.de; mingo@redhat.com; bp@alien8.de; dave.hansen@linux.intel.com; x86@kernel.org; hpa@zytor.com; hdegoede@redhat.com; markgross@kernel.org; jdelvare@suse.com; linux-kernel@vger.kernel.org; platform-driver-x86@vger.kernel.org; linux-hwmon@vger.kernel.org; hb_shi2003@yahoo.com; Wen Wang <wenw@silicom-usa.com>
Subject: Re: [PATCH] Add Silicom Platform Driver

Caution: This is an external email. Please take care when clicking links or opening attachments.


On 8/10/23 10:48, Huibin Shi wrote:
> Ilpo,
>
> See my comments below.
>
> Thanks.
> Henry
> ----Original Message-----
> From: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
> Sent: Thursday, August 3, 2023 8:07 AM
> To: Huibin Shi <henrys@silicom-usa.com>
> Cc: tglx@linutronix.de; mingo@redhat.com; bp@alien8.de; 
> dave.hansen@linux.intel.com; x86@kernel.org; hpa@zytor.com; 
> hdegoede@redhat.com; markgross@kernel.org; jdelvare@suse.com; 
> linux@roeck-us.net; linux-kernel@vger.kernel.org; 
> platform-driver-x86@vger.kernel.org; linux-hwmon@vger.kernel.org; 
> hb_shi2003@yahoo.com; Wen Wang <wenw@silicom-usa.com>
> Subject: RE: [PATCH] Add Silicom Platform Driver
>
> Caution: This is an external email. Please take care when clicking links or opening attachments.
>
>
> On Fri, 28 Jul 2023, Huibin Shi wrote:
>
>> Ilpo,
>>
>> Thanks for the comments. See my comments below.
>>
>> Updated patch will be sent out later after review comments from other reviewer are addressed.
>>
>> Henry
>> -----Original Message-----
>> From: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
>> Sent: Wednesday, July 19, 2023 8:13 AM
>> To: Henry Shi <henryshi2018@gmail.com>
>> Cc: hbshi69@hotmail.com; tglx@linutronix.de; mingo@redhat.com; 
>> bp@alien8.de; dave.hansen@linux.intel.com; x86@kernel.org; 
>> hpa@zytor.com; hdegoede@redhat.com; markgross@kernel.org; 
>> jdelvare@suse.com; linux@roeck-us.net; LKML 
>> <linux-kernel@vger.kernel.org>; platform-driver-x86@vger.kernel.org;
>> linux-hwmon@vger.kernel.org; hb_shi2003@yahoo.com; Huibin Shi 
>> <henrys@silicom-usa.com>; Wen Wang <wenw@silicom-usa.com>
>> Subject: Re: [PATCH] Add Silicom Platform Driver
>>
>> Caution: This is an external email. Please take care when clicking links or opening attachments.
>>
>>
>> On Tue, 18 Jul 2023, Henry Shi wrote:
>>
>>> The Silicom platform (silicom-platform) Linux driver for Swisscom 
>>> Business Box (Swisscom BB) as well as Cordoba family products is a 
>>> software solution designed to facilitate the efficient management 
>>> and control of devices through the integration of various Linux 
>>> frameworks. This platform driver provides seamless support for 
>>> device management via the Linux LED framework, GPIO framework, 
>>> Hardware Monitoring (HWMON), and device attributes. The Silicom 
>>> platform driver's compatibility with these Linux frameworks allows 
>>> applications to access and control Cordoba family devices using 
>>> existing software that is compatible with these frameworks. This 
>>> compatibility simplifies the development process, reduces 
>>> dependencies on proprietary solutions, and promotes interoperability 
>>> with other Linux-based systems and software.
>>>
>>> Signed-off-by: Henry Shi <henryshi2018@gmail.com>
>>> ---
>>>   drivers/platform/x86/Kconfig            |   12 +
>>>   drivers/platform/x86/Makefile           |    1 +
>>>   drivers/platform/x86/silicom-platform.c | 1123
>>> +++++++++++++++++++++++
>>>   3 files changed, 1136 insertions(+)  create mode 100644 
>>> drivers/platform/x86/silicom-platform.c
>>>
>
>>> +void lock_io_modules(void)
>>> +{
>>> +     mutex_lock(&mec_io_mutex);
>>> +}
>>> +EXPORT_SYMBOL(lock_io_modules);
>>> +
>>> +void unlock_io_modules(void)
>>> +{
>>> +     mutex_unlock(&mec_io_mutex);
>>> +}
>>> +EXPORT_SYMBOL(unlock_io_modules);
>
> These are unused.
>
> Henry: This will be used by another Silicom driver, which source code is not pushed to kernel repository.
>

Not an argument. Export it if and when needed. If that other driver won't be sent upstream, the export should not be upstream either.

Henry: OK, will remove these two EXPORT function

Guenter
Huibin Shi Aug. 14, 2023, 1:09 p.m. UTC | #19
-----Original Message-----
From: Guenter Roeck <groeck7@gmail.com> On Behalf Of Guenter Roeck
Sent: Thursday, August 10, 2023 2:01 PM
To: Huibin Shi <henrys@silicom-usa.com>; Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Cc: tglx@linutronix.de; mingo@redhat.com; bp@alien8.de; dave.hansen@linux.intel.com; x86@kernel.org; hpa@zytor.com; hdegoede@redhat.com; markgross@kernel.org; jdelvare@suse.com; linux-kernel@vger.kernel.org; platform-driver-x86@vger.kernel.org; linux-hwmon@vger.kernel.org; hb_shi2003@yahoo.com; Wen Wang <wenw@silicom-usa.com>
Subject: Re: [PATCH] Add Silicom Platform Driver

Caution: This is an external email. Please take care when clicking links or opening attachments.


On 8/10/23 10:48, Huibin Shi wrote:
> Ilpo,
>
> See my comments below.
>
> Thanks.
> Henry
> ----Original Message-----
> From: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
> Sent: Thursday, August 3, 2023 8:07 AM
> To: Huibin Shi <henrys@silicom-usa.com>
> Cc: tglx@linutronix.de; mingo@redhat.com; bp@alien8.de; 
> dave.hansen@linux.intel.com; x86@kernel.org; hpa@zytor.com; 
> hdegoede@redhat.com; markgross@kernel.org; jdelvare@suse.com; 
> linux@roeck-us.net; linux-kernel@vger.kernel.org; 
> platform-driver-x86@vger.kernel.org; linux-hwmon@vger.kernel.org; 
> hb_shi2003@yahoo.com; Wen Wang <wenw@silicom-usa.com>
> Subject: RE: [PATCH] Add Silicom Platform Driver
>
> Caution: This is an external email. Please take care when clicking links or opening attachments.
>
>
> On Fri, 28 Jul 2023, Huibin Shi wrote:
>
>> Ilpo,
>>
>> Thanks for the comments. See my comments below.
>>
>> Updated patch will be sent out later after review comments from other reviewer are addressed.
>>
>> Henry
>> -----Original Message-----
>> From: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
>> Sent: Wednesday, July 19, 2023 8:13 AM
>> To: Henry Shi <henryshi2018@gmail.com>
>> Cc: hbshi69@hotmail.com; tglx@linutronix.de; mingo@redhat.com; 
>> bp@alien8.de; dave.hansen@linux.intel.com; x86@kernel.org; 
>> hpa@zytor.com; hdegoede@redhat.com; markgross@kernel.org; 
>> jdelvare@suse.com; linux@roeck-us.net; LKML 
>> <linux-kernel@vger.kernel.org>; platform-driver-x86@vger.kernel.org;
>> linux-hwmon@vger.kernel.org; hb_shi2003@yahoo.com; Huibin Shi 
>> <henrys@silicom-usa.com>; Wen Wang <wenw@silicom-usa.com>
>> Subject: Re: [PATCH] Add Silicom Platform Driver
>>
>> Caution: This is an external email. Please take care when clicking links or opening attachments.
>>
>>
>> On Tue, 18 Jul 2023, Henry Shi wrote:
>>
>>> The Silicom platform (silicom-platform) Linux driver for Swisscom 
>>> Business Box (Swisscom BB) as well as Cordoba family products is a 
>>> software solution designed to facilitate the efficient management 
>>> and control of devices through the integration of various Linux 
>>> frameworks. This platform driver provides seamless support for 
>>> device management via the Linux LED framework, GPIO framework, 
>>> Hardware Monitoring (HWMON), and device attributes. The Silicom 
>>> platform driver's compatibility with these Linux frameworks allows 
>>> applications to access and control Cordoba family devices using 
>>> existing software that is compatible with these frameworks. This 
>>> compatibility simplifies the development process, reduces 
>>> dependencies on proprietary solutions, and promotes interoperability 
>>> with other Linux-based systems and software.
>>>
>>> Signed-off-by: Henry Shi <henryshi2018@gmail.com>
>>> ---
>>>   drivers/platform/x86/Kconfig            |   12 +
>>>   drivers/platform/x86/Makefile           |    1 +
>>>   drivers/platform/x86/silicom-platform.c | 1123
>>> +++++++++++++++++++++++
>>>   3 files changed, 1136 insertions(+)  create mode 100644 
>>> drivers/platform/x86/silicom-platform.c
>>>
>
>>> +void lock_io_modules(void)
>>> +{
>>> +     mutex_lock(&mec_io_mutex);
>>> +}
>>> +EXPORT_SYMBOL(lock_io_modules);
>>> +
>>> +void unlock_io_modules(void)
>>> +{
>>> +     mutex_unlock(&mec_io_mutex);
>>> +}
>>> +EXPORT_SYMBOL(unlock_io_modules);
>
> These are unused.
>
> Henry: This will be used by another Silicom driver, which source code is not pushed to kernel repository.
>

Besides, those function names are _way_ too generic for public symbols, and even more so for exports.

Henry: Good point, will change the function name to some special names when EXPORT them. 

Guenter
diff mbox series

Patch

diff --git a/drivers/platform/x86/Kconfig b/drivers/platform/x86/Kconfig
index 22052031c719..8c0988c2b4ce 100644
--- a/drivers/platform/x86/Kconfig
+++ b/drivers/platform/x86/Kconfig
@@ -188,6 +188,18 @@  config ACER_WMI
 	  If you have an ACPI-WMI compatible Acer/ Wistron laptop, say Y or M
 	  here.
 
+
+config SILICOM_PLATFORM
+	tristate "Silicom Edge Networking device support"
+	depends on DMI
+	select LEDS_CLASS_MULTICOLOR
+	select GPIOLIB
+	help
+	  This option enables support for the LEDs/GPIO/etc downstream of the
+	  embedded controller on Silicom "Cordoba" hardware and derivatives.
+
+	  If you have a Silicom network appliance, say Y or M here.
+
 source "drivers/platform/x86/amd/Kconfig"
 
 config ADV_SWBUTTON
diff --git a/drivers/platform/x86/Makefile b/drivers/platform/x86/Makefile
index 2cafe51ec4d8..f2f5743a9e54 100644
--- a/drivers/platform/x86/Makefile
+++ b/drivers/platform/x86/Makefile
@@ -113,6 +113,7 @@  obj-$(CONFIG_SERIAL_MULTI_INSTANTIATE)	+= serial-multi-instantiate.o
 obj-$(CONFIG_MLX_PLATFORM)		+= mlx-platform.o
 obj-$(CONFIG_TOUCHSCREEN_DMI)		+= touchscreen_dmi.o
 obj-$(CONFIG_WIRELESS_HOTKEY)		+= wireless-hotkey.o
+obj-$(CONFIG_SILICOM_PLATFORM)          += silicom-platform.o
 obj-$(CONFIG_X86_ANDROID_TABLETS)	+= x86-android-tablets/
 
 # Intel uncore drivers
diff --git a/drivers/platform/x86/silicom-platform.c b/drivers/platform/x86/silicom-platform.c
new file mode 100644
index 000000000000..90431f733682
--- /dev/null
+++ b/drivers/platform/x86/silicom-platform.c
@@ -0,0 +1,1123 @@ 
+// SPDX-License-Identifier: GPL-2.0+
+//
+// silicom-platform.c - Silicom MEC170x platform driver
+//
+// Copyright (C) 2023 Henry Shi <henrys@silicom-usa.com>
+
+#include <linux/dmi.h>
+#include <linux/gpio/driver.h>
+#include <linux/init.h>
+#include <linux/ioport.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/led-class-multicolor.h>
+#include <linux/module.h>
+#include <linux/hwmon.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+#include <linux/string.h>
+#include <linux/thermal.h>
+#include <linux/kobject.h>
+#include <linux/sysfs.h>
+
+#define MEC_ADDR ((mec_io_base) + 0x02)
+#define MEC_DATA(byte) ((mec_io_base) + 0x04 + (byte))
+#define EC_ADDR_LSB MEC_ADDR
+#define EC_ADDR_MSB ((mec_io_base) + 0x03)
+#define SILICOM_MEC_MAGIC 0x5a
+#define OFFSET_BIT_TO_CHANNEL(off, bit) ((((off) + 0x014) << 3) | (bit))
+#define CHANNEL_TO_OFFSET(chan) (((chan) >> 3) - 0x14)
+#define CHANNEL_TO_BIT(chan) ((chan) & 0x07)
+
+static DEFINE_MUTEX(mec_io_mutex);
+static int mec_io_base, mec_io_len;
+
+struct silicom_fan_control_data {
+	struct   device *hdev;
+	int      temp;
+	int      fan_speed;
+};
+
+static const struct hwmon_channel_info *silicom_fan_control_info[] = {
+	HWMON_CHANNEL_INFO(fan, HWMON_F_INPUT | HWMON_F_LABEL),
+	HWMON_CHANNEL_INFO(temp, HWMON_T_INPUT | HWMON_T_LABEL),
+	NULL
+};
+
+struct silicom_device_control_data {
+	struct   device *my_dev;
+	int      efuse_status;
+	int      uc_version;
+	int      power_cycle;
+};
+static struct silicom_device_control_data my_dev_ctl;
+
+struct silicom_platform_info {
+	int io_base;
+	int io_len;
+	struct led_classdev_mc *led_info;
+	struct gpio_chip *gpiochip;
+	u8 *gpio_channels;
+	u16 ngpio;
+};
+
+static const char * const plat_0222_gpio_names[] = {
+	"AUTOM0_SFP_TX_FAULT",
+	"SLOT2_LED_OUT",
+	"SIM_M2_SLOT2_B_DET",
+	"SIM_M2_SLOT2_A_DET",
+	"SLOT1_LED_OUT",
+	"SIM_M2_SLOT1_B_DET",
+	"SIM_M2_SLOT1_A_DET",
+	"SLOT0_LED_OUT",
+	"WAN_SFP0_RX_LOS",
+	"WAN_SFP0_PRSNT_N",
+	"WAN_SFP0_TX_FAULT",
+	"AUTOM1_SFP_RX_LOS",
+	"AUTOM1_SFP_PRSNT_N",
+	"AUTOM1_SFP_TX_FAULT",
+	"AUTOM0_SFP_RX_LOS",
+	"AUTOM0_SFP_PRSNT_N",
+	"WAN_SFP1_RX_LOS",
+	"WAN_SFP1_PRSNT_N",
+	"WAN_SFP1_TX_FAULT",
+	"SIM_M2_SLOT1_MUX_SEL",
+	"W_DISABLE_M2_SLOT1_N",
+	"W_DISABLE_MPCIE_SLOT0_N",
+	"W_DISABLE_M2_SLOT0_N",
+	"BT_COMMAND_MODE",
+	"WAN_SFP1_TX_DISABLE",
+	"WAN_SFP0_TX_DISABLE",
+	"AUTOM1_SFP_TX_DISABLE",
+	"AUTOM0_SFP_TX_DISABLE",
+	"SIM_M2_SLOT2_MUX_SEL",
+	"W_DISABLE_M2_SLOT2_N",
+	"RST_CTL_M2_SLOT_1_N",
+	"RST_CTL_M2_SLOT_2_N",
+	"PM_USB_PWR_EN_BOT",
+	"PM_USB_PWR_EN_TOP",
+};
+
+static u8 plat_0222_gpio_channels[] = {
+	OFFSET_BIT_TO_CHANNEL(0x00, 0),
+	OFFSET_BIT_TO_CHANNEL(0x00, 1),
+	OFFSET_BIT_TO_CHANNEL(0x00, 2),
+	OFFSET_BIT_TO_CHANNEL(0x00, 3),
+	OFFSET_BIT_TO_CHANNEL(0x00, 4),
+	OFFSET_BIT_TO_CHANNEL(0x00, 5),
+	OFFSET_BIT_TO_CHANNEL(0x00, 6),
+	OFFSET_BIT_TO_CHANNEL(0x00, 7),
+	OFFSET_BIT_TO_CHANNEL(0x01, 0),
+	OFFSET_BIT_TO_CHANNEL(0x01, 1),
+	OFFSET_BIT_TO_CHANNEL(0x01, 2),
+	OFFSET_BIT_TO_CHANNEL(0x01, 3),
+	OFFSET_BIT_TO_CHANNEL(0x01, 4),
+	OFFSET_BIT_TO_CHANNEL(0x01, 5),
+	OFFSET_BIT_TO_CHANNEL(0x01, 6),
+	OFFSET_BIT_TO_CHANNEL(0x01, 7),
+	OFFSET_BIT_TO_CHANNEL(0x02, 0),
+	OFFSET_BIT_TO_CHANNEL(0x02, 1),
+	OFFSET_BIT_TO_CHANNEL(0x02, 2),
+	OFFSET_BIT_TO_CHANNEL(0x09, 0),
+	OFFSET_BIT_TO_CHANNEL(0x09, 1),
+	OFFSET_BIT_TO_CHANNEL(0x09, 2),
+	OFFSET_BIT_TO_CHANNEL(0x09, 3),
+	OFFSET_BIT_TO_CHANNEL(0x0a, 0),
+	OFFSET_BIT_TO_CHANNEL(0x0a, 1),
+	OFFSET_BIT_TO_CHANNEL(0x0a, 2),
+	OFFSET_BIT_TO_CHANNEL(0x0a, 3),
+	OFFSET_BIT_TO_CHANNEL(0x0a, 4),
+	OFFSET_BIT_TO_CHANNEL(0x0a, 5),
+	OFFSET_BIT_TO_CHANNEL(0x0a, 6),
+	OFFSET_BIT_TO_CHANNEL(0x0b, 0),
+	OFFSET_BIT_TO_CHANNEL(0x0b, 1),
+	OFFSET_BIT_TO_CHANNEL(0x0b, 2),
+	OFFSET_BIT_TO_CHANNEL(0x0b, 3),
+};
+
+static int silicom_gpio_get_direction(struct gpio_chip *gc, unsigned int offset);
+static int silicom_gpio_direction_input(struct gpio_chip *gc, unsigned int offset);
+static int silicom_gpio_direction_output(struct gpio_chip *gc, unsigned int offset, int value);
+static int silicom_gpio_get(struct gpio_chip *gc, unsigned int offset);
+static void silicom_gpio_set(struct gpio_chip *gc, unsigned int offset, int value);
+static void silicom_mec_led_mc_brightness_set(struct led_classdev *led_cdev,
+					      enum led_brightness brightness);
+static enum led_brightness silicom_mec_led_mc_brightness_get(struct led_classdev *led_cdev);
+static struct platform_device *silicom_platform_dev;
+static struct led_classdev_mc *silicom_led_info __initdata;
+static struct gpio_chip *silicom_gpiochip __initdata;
+static u8 *silicom_gpio_channels __initdata;
+static struct gpio_chip silicom_gpio_chip = {
+	.label = "silicom-gpio",
+	.get_direction = silicom_gpio_get_direction,
+	.direction_input = silicom_gpio_direction_input,
+	.direction_output = silicom_gpio_direction_output,
+	.get = silicom_gpio_get,
+	.set = silicom_gpio_set,
+	.base = -1,
+	.ngpio = ARRAY_SIZE(plat_0222_gpio_channels),
+	.names = plat_0222_gpio_names,
+	/* We're using a mutex to protect the indirect access, so we can sleep if the lock blocks */
+	.can_sleep = true,
+};
+
+static struct mc_subled plat_0222_wan_mc_subled_info[] __initdata = {
+	{
+		.color_index = LED_COLOR_ID_WHITE,
+		.brightness = 1,
+		.intensity = 0,
+		.channel = OFFSET_BIT_TO_CHANNEL(0x0c, 7),
+	},
+	{
+		.color_index = LED_COLOR_ID_YELLOW,
+		.brightness = 1,
+		.intensity = 0,
+		.channel = OFFSET_BIT_TO_CHANNEL(0x0c, 6),
+	},
+	{
+		.color_index = LED_COLOR_ID_RED,
+		.brightness = 1,
+		.intensity = 0,
+		.channel = OFFSET_BIT_TO_CHANNEL(0x0c, 5),
+	},
+};
+
+static struct mc_subled plat_0222_sys_mc_subled_info[] __initdata = {
+	{
+		.color_index = LED_COLOR_ID_WHITE,
+		.brightness = 1,
+		.intensity = 0,
+		.channel = OFFSET_BIT_TO_CHANNEL(0x0c, 4),
+	},
+	{
+		.color_index = LED_COLOR_ID_AMBER,
+		.brightness = 1,
+		.intensity = 0,
+		.channel = OFFSET_BIT_TO_CHANNEL(0x0c, 3),
+	},
+	{
+		.color_index = LED_COLOR_ID_RED,
+		.brightness = 1,
+		.intensity = 0,
+		.channel = OFFSET_BIT_TO_CHANNEL(0x0c, 2),
+	},
+};
+
+static struct mc_subled plat_0222_stat1_mc_subled_info[] __initdata = {
+	{
+		.color_index = LED_COLOR_ID_RED,
+		.brightness = 1,
+		.intensity = 0,
+		.channel = OFFSET_BIT_TO_CHANNEL(0x0c, 1),
+	},
+	{
+		.color_index = LED_COLOR_ID_GREEN,
+		.brightness = 1,
+		.intensity = 0,
+		.channel = OFFSET_BIT_TO_CHANNEL(0x0c, 0),
+	},
+	{
+		.color_index = LED_COLOR_ID_BLUE,
+		.brightness = 1,
+		.intensity = 0,
+		.channel = OFFSET_BIT_TO_CHANNEL(0x0d, 7),
+	},
+	{
+		.color_index = LED_COLOR_ID_YELLOW,
+		.brightness = 1,
+		.intensity = 0,
+		.channel = OFFSET_BIT_TO_CHANNEL(0x0d, 6),
+	},
+};
+
+static struct mc_subled plat_0222_stat2_mc_subled_info[] __initdata = {
+	{
+		.color_index = LED_COLOR_ID_RED,
+		.brightness = 1,
+		.intensity = 0,
+		.channel = OFFSET_BIT_TO_CHANNEL(0x0d, 5),
+	},
+	{
+		.color_index = LED_COLOR_ID_GREEN,
+		.brightness = 1,
+		.intensity = 0,
+		.channel = OFFSET_BIT_TO_CHANNEL(0x0d, 4),
+	},
+	{
+		.color_index = LED_COLOR_ID_BLUE,
+		.brightness = 1,
+		.intensity = 0,
+		.channel = OFFSET_BIT_TO_CHANNEL(0x0d, 3),
+	},
+	{
+		.color_index = LED_COLOR_ID_YELLOW,
+		.brightness = 1,
+		.intensity = 0,
+		.channel = OFFSET_BIT_TO_CHANNEL(0x0d, 2),
+	},
+};
+
+static struct mc_subled plat_0222_stat3_mc_subled_info[] __initdata = {
+	{
+		.color_index = LED_COLOR_ID_RED,
+		.brightness = 1,
+		.intensity = 0,
+		.channel = OFFSET_BIT_TO_CHANNEL(0x0d, 1),
+	},
+	{
+		.color_index = LED_COLOR_ID_GREEN,
+		.brightness = 1,
+		.intensity = 0,
+		.channel = OFFSET_BIT_TO_CHANNEL(0x0d, 0),
+	},
+	{
+		.color_index = LED_COLOR_ID_BLUE,
+		.brightness = 1,
+		.intensity = 0,
+		.channel = OFFSET_BIT_TO_CHANNEL(0x0e, 1),
+	},
+	{
+		.color_index = LED_COLOR_ID_YELLOW,
+		.brightness = 1,
+		.intensity = 0,
+		.channel = OFFSET_BIT_TO_CHANNEL(0x0e, 0),
+	},
+};
+
+static struct led_classdev_mc plat_0222_mc_led_info[] __initdata = {
+	{
+		.led_cdev = {
+			.name = "multicolor:wan",
+			.brightness = 0,
+			.max_brightness = 1,
+			.brightness_set = silicom_mec_led_mc_brightness_set,
+			.brightness_get = silicom_mec_led_mc_brightness_get,
+		},
+		.num_colors = ARRAY_SIZE(plat_0222_wan_mc_subled_info),
+		.subled_info = plat_0222_wan_mc_subled_info,
+	},
+	{
+		.led_cdev = {
+			.name = "multicolor:sys",
+			.brightness = 0,
+			.max_brightness = 1,
+			.brightness_set = silicom_mec_led_mc_brightness_set,
+			.brightness_get = silicom_mec_led_mc_brightness_get,
+		},
+		.num_colors = ARRAY_SIZE(plat_0222_sys_mc_subled_info),
+		.subled_info = plat_0222_sys_mc_subled_info,
+	},
+	{
+		.led_cdev = {
+			.name = "multicolor:stat1",
+			.brightness = 0,
+			.max_brightness = 1,
+			.brightness_set = silicom_mec_led_mc_brightness_set,
+			.brightness_get = silicom_mec_led_mc_brightness_get,
+		},
+		.num_colors = ARRAY_SIZE(plat_0222_stat1_mc_subled_info),
+		.subled_info = plat_0222_stat1_mc_subled_info,
+	},
+	{
+		.led_cdev = {
+			.name = "multicolor:stat2",
+			.brightness = 0,
+			.max_brightness = 1,
+			.brightness_set = silicom_mec_led_mc_brightness_set,
+			.brightness_get = silicom_mec_led_mc_brightness_get,
+		},
+		.num_colors = ARRAY_SIZE(plat_0222_stat2_mc_subled_info),
+		.subled_info = plat_0222_stat2_mc_subled_info,
+	},
+	{
+		.led_cdev = {
+			.name = "multicolor:stat3",
+			.brightness = 0,
+			.max_brightness = 1,
+			.brightness_set = silicom_mec_led_mc_brightness_set,
+			.brightness_get = silicom_mec_led_mc_brightness_get,
+		},
+		.num_colors = ARRAY_SIZE(plat_0222_stat3_mc_subled_info),
+		.subled_info = plat_0222_stat3_mc_subled_info,
+	},
+	{ },
+};
+
+static struct silicom_platform_info silicom_plat_0222_cordoba_info __initdata = {
+	.io_base = 0x800,
+	.io_len = 8,
+	.led_info = plat_0222_mc_led_info,
+	.gpiochip = &silicom_gpio_chip,
+	.gpio_channels = plat_0222_gpio_channels,
+	/* The original generic cordoba does not have the last 4 outputs of the plat_0222 BB variant,
+	 * the rest are the same, so use the same longer list, but ignore the last entries here
+	 */
+	.ngpio = ARRAY_SIZE(plat_0222_gpio_channels),
+
+};
+
+static struct mc_subled cordoba_fp_left_mc_subled_info[] __initdata = {
+	{
+		.color_index = LED_COLOR_ID_RED,
+		.brightness = 1,
+		.intensity = 0,
+		.channel = OFFSET_BIT_TO_CHANNEL(0x08, 6),
+	},
+	{
+		.color_index = LED_COLOR_ID_GREEN,
+		.brightness = 1,
+		.intensity = 0,
+		.channel = OFFSET_BIT_TO_CHANNEL(0x08, 5),
+	},
+	{
+		.color_index = LED_COLOR_ID_BLUE,
+		.brightness = 1,
+		.intensity = 0,
+		.channel = OFFSET_BIT_TO_CHANNEL(0x09, 7),
+	},
+	{
+		.color_index = LED_COLOR_ID_AMBER,
+		.brightness = 1,
+		.intensity = 0,
+		.channel = OFFSET_BIT_TO_CHANNEL(0x09, 4),
+	},
+};
+
+static struct mc_subled cordoba_fp_center_mc_subled_info[] __initdata = {
+	{
+		.color_index = LED_COLOR_ID_RED,
+		.brightness = 1,
+		.intensity = 0,
+		.channel = OFFSET_BIT_TO_CHANNEL(0x08, 7),
+	},
+	{
+		.color_index = LED_COLOR_ID_GREEN,
+		.brightness = 1,
+		.intensity = 0,
+		.channel = OFFSET_BIT_TO_CHANNEL(0x08, 4),
+	},
+	{
+		.color_index = LED_COLOR_ID_BLUE,
+		.brightness = 1,
+		.intensity = 0,
+		.channel = OFFSET_BIT_TO_CHANNEL(0x08, 3),
+	},
+	{
+		.color_index = LED_COLOR_ID_AMBER,
+		.brightness = 1,
+		.intensity = 0,
+		.channel = OFFSET_BIT_TO_CHANNEL(0x09, 6),
+	},
+};
+
+static struct mc_subled cordoba_fp_right_mc_subled_info[] __initdata = {
+	{
+		.color_index = LED_COLOR_ID_RED,
+		.brightness = 1,
+		.intensity = 0,
+		.channel = OFFSET_BIT_TO_CHANNEL(0x08, 2),
+	},
+	{
+		.color_index = LED_COLOR_ID_GREEN,
+		.brightness = 1,
+		.intensity = 0,
+		.channel = OFFSET_BIT_TO_CHANNEL(0x08, 1),
+	},
+	{
+		.color_index = LED_COLOR_ID_BLUE,
+		.brightness = 1,
+		.intensity = 0,
+		.channel = OFFSET_BIT_TO_CHANNEL(0x08, 0),
+	},
+	{
+		.color_index = LED_COLOR_ID_AMBER,
+		.brightness = 1,
+		.intensity = 0,
+		.channel = OFFSET_BIT_TO_CHANNEL(0x09, 5),
+	},
+};
+
+static struct led_classdev_mc cordoba_mc_led_info[] __initdata = {
+	{
+		.led_cdev = {
+			.name = "multicolor:fp_left",
+			.brightness = 0,
+			.max_brightness = 1,
+			.brightness_set = silicom_mec_led_mc_brightness_set,
+			.brightness_get = silicom_mec_led_mc_brightness_get,
+		},
+		.num_colors = ARRAY_SIZE(cordoba_fp_left_mc_subled_info),
+		.subled_info = cordoba_fp_left_mc_subled_info,
+	},
+	{
+		.led_cdev = {
+			.name = "multicolor:fp_center",
+			.brightness = 0,
+			.max_brightness = 1,
+			.brightness_set = silicom_mec_led_mc_brightness_set,
+			.brightness_get = silicom_mec_led_mc_brightness_get,
+		},
+		.num_colors = ARRAY_SIZE(cordoba_fp_center_mc_subled_info),
+		.subled_info = cordoba_fp_center_mc_subled_info,
+	},
+	{
+		.led_cdev = {
+			.name = "multicolor:fp_right",
+			.brightness = 0,
+			.max_brightness = 1,
+			.brightness_set = silicom_mec_led_mc_brightness_set,
+			.brightness_get = silicom_mec_led_mc_brightness_get,
+		},
+		.num_colors = ARRAY_SIZE(cordoba_fp_right_mc_subled_info),
+		.subled_info = cordoba_fp_right_mc_subled_info,
+	},
+	{ },
+};
+
+static struct silicom_platform_info silicom_generic_cordoba_info __initdata = {
+	.io_base = 0x800,
+	.io_len = 8,
+	.led_info = cordoba_mc_led_info,
+	.gpiochip = &silicom_gpio_chip,
+	.gpio_channels = plat_0222_gpio_channels,
+	.ngpio = ARRAY_SIZE(plat_0222_gpio_channels),
+};
+
+static struct platform_driver silicom_platform_driver = {
+	.driver = {
+		.name = "silicom-platform",
+	},
+};
+
+void lock_io_modules(void)
+{
+	mutex_lock(&mec_io_mutex);
+}
+EXPORT_SYMBOL(lock_io_modules);
+
+void unlock_io_modules(void)
+{
+	mutex_unlock(&mec_io_mutex);
+}
+EXPORT_SYMBOL(unlock_io_modules);
+
+static ssize_t efuse_status_show(struct device *dev, struct device_attribute *attr,
+		      char *buf)
+{
+	u32 reg;
+	u32 bank = 0;
+	u32 offset = 0x28;
+	u32 byte_pos = 0;
+
+	mutex_lock(&mec_io_mutex);
+	/* Select memory region */
+	outb(bank, EC_ADDR_MSB);
+	outb(offset, EC_ADDR_LSB);
+
+	/* Get current date from the address */
+	reg = inl(MEC_DATA(byte_pos));
+	mutex_unlock(&mec_io_mutex);
+
+	my_dev_ctl.efuse_status = reg & 0x1;
+
+	return sprintf(buf, "%d\n", my_dev_ctl.efuse_status);
+}
+
+static ssize_t uc_version_show(struct device *dev,
+			       struct device_attribute *attr,
+			       char *buf)
+{
+	u32 reg;
+	u32 bank = 0;
+	u32 offset = 0x0;
+	u32 byte_pos = 0;
+	int uc_version;
+
+	mutex_lock(&mec_io_mutex);
+	outb(bank, EC_ADDR_MSB);
+	outb(offset, EC_ADDR_LSB);
+
+	reg = inl(MEC_DATA(byte_pos));
+	mutex_unlock(&mec_io_mutex);
+
+	uc_version = (reg >> 8) & 0xFF;
+	if (uc_version >= 64 && uc_version < 128) {
+		uc_version = uc_version - 64;
+		if (uc_version < 10)
+			uc_version = 100 + uc_version;
+		else
+			uc_version = 100 + 10 * (uc_version / 10) + uc_version % 10;
+	} else if (uc_version >= 128 && uc_version < 192) {
+		uc_version = uc_version - 128;
+		if (uc_version < 10)
+			uc_version = 200 + uc_version;
+		else
+			uc_version = 200 + 10 * (uc_version / 10) + uc_version % 10;
+	}
+	my_dev_ctl.uc_version = uc_version;
+	return sprintf(buf, "%d\n", my_dev_ctl.uc_version);
+}
+
+static ssize_t power_cycle_show(struct device *dev,
+				struct device_attribute *attr,
+				char *buf)
+{
+	return sprintf(buf, "%d\n", my_dev_ctl.power_cycle);
+}
+
+static void powercycle_uc(void)
+{
+	u32 bank = 0;
+	u32 offset = 0x24;
+	u32 byte_pos = 0;
+
+	mutex_lock(&mec_io_mutex);
+	/* Select memory region */
+	outb(bank, EC_ADDR_MSB);
+	outb(offset, EC_ADDR_LSB);
+
+	/* Set to 1 for current date from the address */
+	outb(1, MEC_DATA(byte_pos));
+	mutex_unlock(&mec_io_mutex);
+}
+
+static ssize_t power_cycle_store(struct device *dev, struct device_attribute *attr,
+				 const char *buf, size_t count)
+{
+	if (sscanf(buf, "%du", &my_dev_ctl.power_cycle) != 1) {
+		dev_err(dev, "Failed to read power_cycle\n");
+		return -EINVAL;
+	}
+	if (my_dev_ctl.power_cycle > 0)
+		powercycle_uc();
+
+	return count;
+}
+
+static struct device_attribute my_dev_attr[] = {
+	{
+		.attr = {.name = "efuse_status", .mode = 0644},
+		.show = efuse_status_show,
+		.store = NULL
+	},
+	{
+		.attr = {.name = "uc_version", .mode = 0644},
+		.show = uc_version_show,
+		.store = NULL
+	},
+	{
+		.attr = {.name = "power_cycle", .mode = 0644},
+		.show = power_cycle_show,
+		.store = power_cycle_store
+	},
+};
+
+static int silicom_gpio_get_direction(struct gpio_chip *gc, unsigned int offset)
+{
+	u8 *channels = gpiochip_get_data(gc);
+
+	/* Input registers have offsets between [0x00, 0x07] */
+	if (CHANNEL_TO_OFFSET(channels[offset]) < 0x08)
+		return GPIO_LINE_DIRECTION_IN;
+
+	return GPIO_LINE_DIRECTION_OUT;
+}
+
+static int silicom_gpio_direction_input(struct gpio_chip *gc, unsigned int offset)
+{
+	int direction = silicom_gpio_get_direction(gc, offset);
+
+	return direction == GPIO_LINE_DIRECTION_IN ? 0 : -EINVAL;
+}
+
+static void silicom_gpio_set(struct gpio_chip *gc, unsigned int offset, int value)
+{
+	u8 *channels = gpiochip_get_data(gc);
+	int direction = silicom_gpio_get_direction(gc, offset);
+	int channel = channels[offset];
+	u8 reg;
+
+	if (direction == GPIO_LINE_DIRECTION_IN)
+		return;
+
+	mutex_lock(&mec_io_mutex);
+	/* Get the dword offset from the channel */
+	outb((channel >> 3) & 0xfc, MEC_ADDR);
+
+	/* Get the current register */
+	reg = inb(MEC_DATA((channel >> 3) & 0x03));
+	if (value == 0)
+		reg &= ~(1 << (channel & 0x7));
+	else if (value > 0)
+		reg |= 1 << (channel & 0x7);
+	else
+		pr_err("Invalid GPIO value: %d\n", value);
+	outb(reg, MEC_DATA((channel >> 3) & 0x03));
+	mutex_unlock(&mec_io_mutex);
+}
+
+static int silicom_gpio_direction_output(struct gpio_chip *gc, unsigned int offset, int value)
+{
+	int direction = silicom_gpio_get_direction(gc, offset);
+
+	if (direction == GPIO_LINE_DIRECTION_IN)
+		return -EINVAL;
+
+	silicom_gpio_set(gc, offset, value);
+
+	return 0;
+}
+
+static int silicom_gpio_get(struct gpio_chip *gc, unsigned int offset)
+{
+	u8 *channels = gpiochip_get_data(gc);
+	int channel = channels[offset];
+	u8 reg;
+
+	mutex_lock(&mec_io_mutex);
+	/* Get the dword offset from the channel */
+	outb((channel >> 3) & 0xfc, MEC_ADDR);
+
+	/* Get the current register */
+	reg = inb(MEC_DATA((channel >> 3) & 0x03));
+	mutex_unlock(&mec_io_mutex);
+
+	return (reg >> (channel & 0x7)) & 0x01;
+}
+
+static int __init silicom_mc_leds_register(struct device *dev,
+					   const struct led_classdev_mc *mc_leds)
+{
+	struct led_classdev_mc *led;
+	int i, err;
+
+	for (i = 0; mc_leds[i].led_cdev.name; i++) {
+		/* allocate and copy data from the init constansts */
+		led = devm_kzalloc(dev, sizeof(struct led_classdev_mc), GFP_KERNEL);
+		if (IS_ERR_OR_NULL(led)) {
+			dev_err(dev, "Failed to alloc led_classdev_mc[%d]: %ld\n", i, PTR_ERR(led));
+			return -ENOMEM;
+		}
+		memcpy(led, &mc_leds[i], sizeof(*led));
+
+		led->subled_info = devm_kzalloc(dev, led->num_colors * sizeof(struct mc_subled),
+						GFP_KERNEL);
+		if (IS_ERR_OR_NULL(led->subled_info)) {
+			dev_err(dev, "Failed to alloc subled_info[%d]: %ld\n",
+				i, PTR_ERR(led->subled_info));
+			return -ENOMEM;
+		}
+		memcpy(led->subled_info, mc_leds[i].subled_info,
+			led->num_colors * sizeof(struct mc_subled));
+
+		err = devm_led_classdev_multicolor_register(dev, led);
+		if (err) {
+			dev_err(dev, "Failed to register[%d]: %d\n", i, err);
+			return err;
+		}
+	}
+
+	return 0;
+}
+
+static void silicom_mec_led_set(int channel, int on)
+{
+	u8 reg;
+
+	mutex_lock(&mec_io_mutex);
+	/* Get the dword offset from the channel */
+	outb((channel >> 3) & 0xfc, MEC_ADDR);
+
+	/* Get the current LED settings */
+	reg = inb(MEC_DATA((channel >> 3) & 0x03));
+
+	/* Outputs are active low, so clear the bit for on, or set it for off */
+	if (on)
+		reg &= ~(1 << (channel & 0x7));
+	else
+		reg |= 1 << (channel & 0x7);
+
+	/* Write back the updated register */
+	outb(reg, MEC_DATA((channel >> 3) & 0x03));
+
+	mutex_unlock(&mec_io_mutex);
+}
+
+static void silicom_mec_led_mc_brightness_set(struct led_classdev *led_cdev,
+					      enum led_brightness brightness)
+{
+	struct led_classdev_mc *mc_cdev = lcdev_to_mccdev(led_cdev);
+	int i;
+
+	led_mc_calc_color_components(mc_cdev, brightness);
+
+	for (i = 0; i < mc_cdev->num_colors; i++) {
+		silicom_mec_led_set(mc_cdev->subled_info[i].channel,
+				    mc_cdev->subled_info[i].brightness);
+	}
+}
+
+static enum led_brightness silicom_mec_led_get(int channel)
+{
+	u8 reg;
+
+	mutex_lock(&mec_io_mutex);
+	/* Get the dword offset of the register for this LED from the channel */
+	outb((channel >> 3) & 0xfc, MEC_ADDR);
+	/* Get the current LED settings */
+	reg = inb(MEC_DATA((channel >> 3) & 0x03));
+	mutex_unlock(&mec_io_mutex);
+
+	/* Outputs are active low */
+	return reg & (1 << (channel & 0x7)) ? LED_OFF : LED_ON;
+}
+
+static enum led_brightness silicom_mec_led_mc_brightness_get(struct led_classdev *led_cdev)
+{
+	struct led_classdev_mc *mc_cdev = lcdev_to_mccdev(led_cdev);
+	enum led_brightness brightness = LED_OFF;
+	int i;
+
+	for (i = 0; i < mc_cdev->num_colors; i++) {
+		mc_cdev->subled_info[i].brightness =
+			silicom_mec_led_get(mc_cdev->subled_info[i].channel);
+
+		/* Mark the overall brightness as LED_ON if any of the subleds are on */
+		if (mc_cdev->subled_info[i].brightness != LED_OFF)
+			brightness = LED_ON;
+	}
+
+	return brightness;
+}
+
+
+static u32 rpm_get(void)
+{
+	u32 reg;
+	u32 bank = 0;
+	u32 offset = 0xc;
+	u32 byte_pos = 0;
+
+	mutex_lock(&mec_io_mutex);
+	/* Select memory region */
+	outb(bank, EC_ADDR_MSB);
+	outb(offset, EC_ADDR_LSB);
+	/* Get current date from the address */
+	reg = inw(MEC_DATA(byte_pos));
+	mutex_unlock(&mec_io_mutex);
+
+	return reg;
+}
+
+static u32 temp_get(void)
+{
+	u32 reg;
+	u32 bank = 0;
+	u32 offset = 0xc;
+	u32 byte_pos = 0;
+
+	mutex_lock(&mec_io_mutex);
+	/* Select memory region */
+	outb(bank, EC_ADDR_MSB);
+	outb(offset, EC_ADDR_LSB);
+	/* Get current date from the address */
+	reg = inl(MEC_DATA(byte_pos));
+	mutex_unlock(&mec_io_mutex);
+
+	return (reg >> 16) / 10;
+}
+
+static umode_t silicom_fan_control_fan_is_visible(const u32 attr)
+{
+	switch (attr) {
+	case hwmon_fan_input:
+	case hwmon_fan_label:
+		return 0444;
+	default:
+		return 0;
+	}
+}
+
+static umode_t silicom_fan_control_temp_is_visible(const u32 attr)
+{
+	switch (attr) {
+	case hwmon_temp_input:
+	case hwmon_temp_label:
+		return 0444;
+	default:
+		return 0;
+	}
+}
+
+static int silicom_fan_control_read_fan(struct device *dev, u32 attr, long *val)
+{
+	struct silicom_fan_control_data *ctl = dev_get_drvdata(dev);
+
+	switch (attr) {
+	case hwmon_fan_input:
+		ctl->fan_speed = rpm_get();
+		*val = ctl->fan_speed;
+		return 0;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static int silicom_fan_control_read_temp(struct device *dev, u32 attr, long *val)
+{
+	struct silicom_fan_control_data *ctl = dev_get_drvdata(dev);
+
+	switch (attr) {
+	case hwmon_temp_input:
+		ctl->temp = temp_get();
+		*val = ctl->temp;
+		return 0;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static umode_t silicom_fan_control_is_visible(const void *data,
+					  enum hwmon_sensor_types type,
+					  u32 attr, int channel)
+{
+	switch (type) {
+	case hwmon_fan:
+		return silicom_fan_control_fan_is_visible(attr);
+	case hwmon_temp:
+		return silicom_fan_control_temp_is_visible(attr);
+	default:
+		return 0;
+	}
+}
+
+static int silicom_fan_control_read(struct device *dev, enum hwmon_sensor_types type,
+				    u32 attr, int channel, long *val)
+{
+	switch (type) {
+	case hwmon_fan:
+		return silicom_fan_control_read_fan(dev, attr, val);
+	case hwmon_temp:
+		return silicom_fan_control_read_temp(dev, attr, val);
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static int silicom_fan_control_read_labels(struct device *dev, enum hwmon_sensor_types type,
+					   u32 attr, int channel, const char **str)
+{
+	switch (type) {
+	case hwmon_fan:
+		*str = "Fan Speed (RPM)";
+		return 0;
+	case hwmon_temp:
+		*str = "Thermostat Sensor";
+		return 0;
+	default:
+		return -EOPNOTSUPP;
+	}
+}
+
+static int silicom_fan_control_write(struct device *dev, enum hwmon_sensor_types type,
+				     u32 attr, int channel, long val)
+{
+	return 0;
+}
+
+static const struct hwmon_ops silicom_fan_control_hwmon_ops = {
+	.is_visible = silicom_fan_control_is_visible,
+	.read = silicom_fan_control_read,
+	.write = silicom_fan_control_write,
+	.read_string = silicom_fan_control_read_labels,
+};
+
+static const struct hwmon_chip_info silicom_chip_info = {
+	.ops = &silicom_fan_control_hwmon_ops,
+	.info = silicom_fan_control_info,
+};
+
+static int __init silicom_platform_probe(struct platform_device *device)
+{
+	int i, err;
+	u8 magic, ver;
+	struct silicom_fan_control_data *ctl;
+	const char *name = "Silocom_Fan_Monitor";
+	const char *dev_name = "Silicom_platform";
+
+	mec_io_base = 0x0800;
+	mec_io_len = 8;
+	if (!devm_request_region(&device->dev, mec_io_base, mec_io_len, "mec")) {
+		dev_err(&device->dev, "couldn't reserve MEC io ports\n");
+		return -EBUSY;
+	}
+
+	/* Sanity check magic number read for EC */
+	outb(0x00, MEC_ADDR);
+	magic = inb(MEC_DATA(0));
+	ver = inb(MEC_DATA(1));
+	dev_dbg(&device->dev, "EC magic 0x%02x, version 0x%02x\n", magic, ver);
+
+	if (magic != SILICOM_MEC_MAGIC) {
+		dev_err(&device->dev, "Bad EC magic 0x%02x!\n", magic);
+		return -ENODEV;
+	}
+
+	if (silicom_led_info) {
+		err = silicom_mc_leds_register(&device->dev, silicom_led_info);
+		if (err) {
+			dev_err(&device->dev, "Failed to register LEDs\n");
+			return err;
+		}
+	}
+
+	if (silicom_gpiochip) {
+		err = devm_gpiochip_add_data(&device->dev, silicom_gpiochip, silicom_gpio_channels);
+		if (err) {
+			dev_err(&device->dev, "Failed to register gpiochip: %d\n", err);
+			return err;
+		}
+	}
+
+	ctl = devm_kzalloc(&device->dev, sizeof(*ctl), GFP_KERNEL);
+	if (!ctl)
+		return -ENOMEM;
+
+	ctl->hdev = devm_hwmon_device_register_with_info(&device->dev, name, ctl,
+				&silicom_chip_info, NULL);
+
+	my_dev_ctl.my_dev = root_device_register(dev_name);
+	for (i = 0; i < ARRAY_SIZE(my_dev_attr); i++) {
+		err = sysfs_create_file(&my_dev_ctl.my_dev->kobj, &my_dev_attr[i].attr);
+		if (err) {
+			pr_debug("failed to create the foo file in /sys/devices/Silicom_platform\n");
+			break;
+		}
+	}
+
+	return err;
+}
+
+static int __init silicom_platform_info_init(const struct dmi_system_id *id)
+{
+	struct silicom_platform_info *info = id->driver_data;
+
+	dev_info(&silicom_platform_dev->dev, "Detected %s\n", id->ident);
+
+	mec_io_base = info->io_base;
+	mec_io_len = info->io_len;
+	silicom_led_info = info->led_info;
+	silicom_gpio_channels = info->gpio_channels;
+	silicom_gpiochip = info->gpiochip;
+	if (silicom_gpiochip)
+		silicom_gpiochip->ngpio = info->ngpio;
+
+	return 1;
+}
+
+static const struct dmi_system_id silicom_dmi_ids[] __initconst = {
+	{
+		.callback = silicom_platform_info_init,
+		.ident = "Silicom Cordoba (Generic)",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Silicom"),
+			DMI_MATCH(DMI_BOARD_NAME, "80300-0214-G"),
+		},
+		.driver_data = &silicom_generic_cordoba_info,
+	},
+	{
+		.callback = silicom_platform_info_init,
+		.ident = "Silicom Cordoba (Generic)",
+		.matches = {
+			DMI_MATCH(DMI_BOARD_VENDOR, "Silicom"),
+			DMI_MATCH(DMI_BOARD_NAME, "80500-0214-G"),
+		},
+		.driver_data = &silicom_generic_cordoba_info,
+	},
+	{
+		 .callback = silicom_platform_info_init,
+		 .ident = "Silicom Cordoba (plat_0222)",
+		 .matches = {
+		       DMI_MATCH(DMI_BOARD_VENDOR, "Silicom"),
+		       DMI_MATCH(DMI_BOARD_NAME, "80300-0222-G"),
+		 },
+		.driver_data = &silicom_plat_0222_cordoba_info,
+	},
+	{ },
+};
+
+static int __init silicom_platform_init(void)
+{
+	struct device *dev;
+	int err;
+
+	/* register a platform device to act as the parent for LEDS, etc. */
+	silicom_platform_dev = platform_device_register_simple("silicom-platform", -1, NULL, 0);
+	if (IS_ERR(silicom_platform_dev)) {
+		err = PTR_ERR(silicom_platform_dev);
+		pr_err("failed to register silicom-platform device: %d\n", err);
+		goto silicom_init_register_err;
+	}
+	dev = &silicom_platform_dev->dev;
+
+	err = dmi_check_system(silicom_dmi_ids);
+	if (err == 0) {
+		dev_err(dev, "No DMI match for this platform\n");
+		err = -ENODEV;
+		goto silicom_init_probe_err;
+	}
+
+	/* Directly probe the platform driver in init since this isn't a
+	 * hotpluggable device.  That means we don't need to register a driver
+	 * that needs to wait around in memory on the chance a matching device
+	 * would get added.  Instead run once in __init so that we can free all
+	 * those resources when the __init region is wiped
+	 */
+	err = platform_driver_probe(&silicom_platform_driver, silicom_platform_probe);
+	if (err) {
+		dev_err(dev, "Failed to probe platform driver %d\n", err);
+		goto silicom_init_probe_err;
+	}
+
+	return 0;
+
+silicom_init_probe_err:
+	if (silicom_platform_dev) {
+		platform_device_unregister(silicom_platform_dev);
+		silicom_platform_dev = NULL;
+	}
+	if (my_dev_ctl.my_dev) {
+		root_device_unregister(my_dev_ctl.my_dev);
+		my_dev_ctl.my_dev = NULL;
+	}
+
+silicom_init_register_err:
+	return err;
+}
+
+static void __exit silicom_platform_exit(void)
+{
+	int i;
+
+	if (silicom_platform_dev) {
+		platform_device_unregister(silicom_platform_dev);
+		platform_driver_unregister(&silicom_platform_driver);
+	}
+
+	if (my_dev_ctl.my_dev) {
+		for (i = 0; i < ARRAY_SIZE(my_dev_attr); i++)
+			sysfs_remove_file(&my_dev_ctl.my_dev->kobj, &my_dev_attr[i].attr);
+		root_device_unregister(my_dev_ctl.my_dev);
+	}
+	mutex_destroy(&mec_io_mutex);
+}
+
+module_init(silicom_platform_init);
+module_exit(silicom_platform_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Henry Shi <henrys@silicom-usa.com>");
+MODULE_DESCRIPTION("Platform driver for Silicom network appliances");
+
+MODULE_DEVICE_TABLE(dmi, silicom_dmi_ids);
+